summaryrefslogtreecommitdiff
path: root/sys/dev/isa
diff options
context:
space:
mode:
Diffstat (limited to 'sys/dev/isa')
-rw-r--r--sys/dev/isa/seagate.c71
1 files changed, 37 insertions, 34 deletions
diff --git a/sys/dev/isa/seagate.c b/sys/dev/isa/seagate.c
index fcba075b106..a6b6e9a31c7 100644
--- a/sys/dev/isa/seagate.c
+++ b/sys/dev/isa/seagate.c
@@ -1,16 +1,16 @@
-/* $OpenBSD: seagate.c,v 1.13 1999/01/31 14:56:01 espie Exp $ */
+/* $OpenBSD: seagate.c,v 1.14 2001/01/29 06:49:26 mickey Exp $ */
/*
* ST01/02, Future Domain TMC-885, TMC-950 SCSI driver
*
* Copyright 1994, Charles Hannum (mycroft@ai.mit.edu)
* Copyright 1994, Kent Palmkvist (kentp@isy.liu.se)
- * Copyright 1994, Robert Knier (rknier@qgraph.com)
+ * Copyright 1994, Robert Knier (rknier@qgraph.com)
* Copyright 1992, 1994 Drew Eckhardt (drew@colorado.edu)
* Copyright 1994, Julian Elischer (julian@tfs.com)
*
* Others that has contributed by example code is
- * Glen Overby (overby@cray.com)
+ * Glen Overby (overby@cray.com)
* Tatu Yllnen
* Brian E Litzinger
*
@@ -39,13 +39,13 @@
/*
* kentp 940307 alpha version based on newscsi-03 version of Julians SCSI-code
* kentp 940314 Added possibility to not use messages
- * rknier 940331 Added fast transfer code
- * rknier 940407 Added assembler coded data transfers
+ * rknier 940331 Added fast transfer code
+ * rknier 940407 Added assembler coded data transfers
*/
/*
* What should really be done:
- *
+ *
* Add missing tests for timeouts
* Restructure interrupt enable/disable code (runs to long with int disabled)
* Find bug? giving problem with tape status
@@ -63,7 +63,7 @@
* It is therefore important to look at what numbers DOS thinks the
* disk has. Use these to disklabel your disk in an appropriate manner
*/
-
+
#include <sys/types.h>
#include <sys/param.h>
#include <sys/systm.h>
@@ -169,7 +169,7 @@
/******************************************************************************/
-/* scsi control block used to keep info about a scsi command */
+/* scsi control block used to keep info about a scsi command */
struct sea_scb {
u_char *data; /* position in data buffer so far */
int datalen; /* bytes remaining to transfer */
@@ -362,7 +362,7 @@ seaprobe(parent, match, aux)
return 0;
} else
sea->maddr = ISA_HOLE_VADDR(ia->ia_maddr);
-
+
/* check board type */ /* No way to define this through config */
for (i = 0; i < nsignatures; i++)
if (!bcmp(sea->maddr + signatures[i].offset,
@@ -403,7 +403,7 @@ seaprobe(parent, match, aux)
printf("%s: board RAM failure\n", sea->sc_dev.dv_xname);
return 0;
}
-
+
ia->ia_drq = DRQUNK;
ia->ia_msize = 0x2000;
ia->ia_iosize = 0;
@@ -415,7 +415,7 @@ seaprint(aux, name)
void *aux;
const char *name;
{
- if (name != NULL)
+ if (name != NULL)
printf("%s: scsibus ", name);
return UNCONF;
}
@@ -441,7 +441,7 @@ seaattach(parent, self, aux)
sea->sc_link.adapter = &sea_switch;
sea->sc_link.device = &sea_dev;
sea->sc_link.openings = 1;
-
+
printf("\n");
sea->sc_ih = isa_intr_establish(ia->ia_ic, ia->ia_irq, IST_EDGE,
@@ -497,12 +497,12 @@ sea_init(sea)
struct sea_softc *sea;
{
int i;
-
+
/* Reset the scsi bus (I don't know if this is needed */
CONTROL = BASE_CMD | CMD_DRVR_ENABLE | CMD_RST;
delay(25); /* hold reset for at least 25 microseconds */
CONTROL = BASE_CMD;
- delay(10); /* wait a Bus Clear Delay (800 ns + bus free delay (800 ns) */
+ delay(10); /* wait a Bus Clear Delay (800 ns + bus free delay (800 ns) */
/* Set our id (don't know anything about this) */
switch (sea->type) {
@@ -588,7 +588,8 @@ sea_scsi_cmd(xs)
* Usually return SUCCESSFULLY QUEUED
*/
if ((flags & SCSI_POLL) == 0) {
- timeout(sea_timeout, scb, (xs->timeout * hz) / 1000);
+ timeout_set(&scb->xs->stimeout, sea_timeout, scb);
+ timeout_add(&scb->xs->stimeout, (xs->timeout * hz) / 1000);
splx(s);
return SUCCESSFULLY_QUEUED;
}
@@ -708,7 +709,7 @@ loop:
(1 << scb->xs->sc_link->lun))) {
TAILQ_REMOVE(&sea->ready_list, scb,
chain);
-
+
/* Re-enable interrupts. */
splx(s);
@@ -757,7 +758,7 @@ loop:
}
}
} /* if (!sea->nexus) */
-
+
splx(s);
if (sea->nexus) { /* we are connected. Do the task */
sea_information_transfer(sea);
@@ -818,7 +819,7 @@ sea_timeout(arg)
if (scb->flags & SCB_ABORTED) {
/* abort timed out */
printf(" AGAIN\n");
- scb->xs->retries = 0;
+ scb->xs->retries = 0;
scb->flags |= SCB_ABORTED;
sea_done(sea, scb);
} else {
@@ -827,13 +828,15 @@ sea_timeout(arg)
scb->flags |= SCB_ABORTED;
sea_abort(sea, scb);
/* 2 secs for the abort */
- if ((xs->flags & SCSI_POLL) == 0)
- timeout(sea_timeout, scb, 2 * hz);
+ if ((xs->flags & SCSI_POLL) == 0) {
+ timeout_set(&scb->xs->stimeout, sea_timeout, scb);
+ timeout_add(&scb->xs->stimeout, 2 * hz);
+ }
}
splx(s);
}
-
+
void
sea_reselect(sea)
struct sea_softc *sea;
@@ -846,7 +849,7 @@ sea_reselect(sea)
u_char *data;
struct sea_scb *scb;
int abort = 0;
-
+
if (!((target_mask = STATUS) & STAT_SEL)) {
printf("%s: wrong state 0x%x\n", sea->sc_dev.dv_xname,
target_mask);
@@ -881,7 +884,7 @@ sea_reselect(sea)
len = 3;
data = msg;
phase = PH_MSGIN;
- sea_transfer_pio(sea, &phase, &len, &data);
+ sea_transfer_pio(sea, &phase, &len, &data);
if (MSG_ISIDENTIFY(msg[0])) {
printf("%s: expecting IDENTIFY message, got 0x%x\n",
@@ -1056,7 +1059,7 @@ sea_select(sea, scb)
#else
(BASE_CMD & ~CMD_INTR) | CMD_DRVR_ENABLE | CMD_SEL | CMD_ATTN;
#endif
- delay(1);
+ delay(1);
/* wait for a bsy from target */
for (timeout = 0; timeout < 2000000L; timeout++)
@@ -1076,7 +1079,7 @@ sea_select(sea, scb)
CONTROL = (BASE_CMD & ~CMD_INTR) | CMD_DRVR_ENABLE | CMD_ATTN;
#endif
delay(1);
-
+
/* should start a msg_out phase */
for (timeout = 0; timeout < 2000000L; timeout++)
if (STATUS & STAT_REQ)
@@ -1101,7 +1104,7 @@ sea_select(sea, scb)
if (!(STATUS & STAT_BSY))
printf("%s: after successful arbitrate: no STAT_BSY!\n",
sea->sc_dev.dv_xname);
-
+
sea->nexus = scb;
sea->busy[scb->xs->sc_link->target] |= 1 << scb->xs->sc_link->lun;
/* This assignment should depend on possibility to send a message to target. */
@@ -1181,7 +1184,7 @@ sea_done(sea, scb)
{
struct scsi_xfer *xs = scb->xs;
- untimeout(sea_timeout, scb);
+ timeout_del(&scb->xs->stimeout);
xs->resid = scb->datalen;
@@ -1304,14 +1307,14 @@ sea_information_transfer(sea)
if ((tmp & PH_MASK) != phase)
break;
if (!(phase & STAT_IO)) {
- int block = BLOCK_SIZE;
+ int block = BLOCK_SIZE;
void *a = sea->maddr_dr;
#ifdef SEA_ASSEMBLER
asm("shr $2, %%ecx\n\t\
cld\n\t\
rep\n\t\
movsl" :
- "=S" (scb->data),
+ "=S" (scb->data),
"=c" (block) ,
"=D" (a) :
"0" (scb->data),
@@ -1323,7 +1326,7 @@ sea_information_transfer(sea)
count++)
DATA = *(scb->data++);
#endif
- } else {
+ } else {
int block = BLOCK_SIZE;
void *a = sea->maddr_dr;
#ifdef SEA_ASSEMBLER
@@ -1346,7 +1349,7 @@ sea_information_transfer(sea)
scb->datalen -= BLOCK_SIZE;
}
}
-#endif
+#endif
if (scb->datalen)
sea_transfer_pio(sea, &phase, &scb->datalen,
&scb->data);
@@ -1369,7 +1372,7 @@ sea_information_transfer(sea)
s = splbio();
sea->nexus = NULL;
splx(s);
- sea->busy[scb->xs->sc_link->target] &=
+ sea->busy[scb->xs->sc_link->target] &=
~(1 << scb->xs->sc_link->lun);
CONTROL = BASE_CMD;
sea_done(sea, scb);
@@ -1411,11 +1414,11 @@ sea_information_transfer(sea)
printf("%s: sent message abort to target\n",
sea->sc_dev.dv_xname);
s = splbio();
- sea->busy[scb->xs->sc_link->target] &=
+ sea->busy[scb->xs->sc_link->target] &=
~(1 << scb->xs->sc_link->lun);
sea->nexus = NULL;
scb->flags = SCB_ABORTED;
- splx(s);
+ splx(s);
/* enable interrupt from scsi */
sea_done(sea, scb);
return;
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-16 17:00:52 +0000