diff options
Diffstat (limited to 'sys/dev/microcode/aic7xxx/aic79xx.seq')
-rw-r--r-- | sys/dev/microcode/aic7xxx/aic79xx.seq | 14 |
1 files changed, 7 insertions, 7 deletions
diff --git a/sys/dev/microcode/aic7xxx/aic79xx.seq b/sys/dev/microcode/aic7xxx/aic79xx.seq index dafe1caa038..cb30c8bb68f 100644 --- a/sys/dev/microcode/aic7xxx/aic79xx.seq +++ b/sys/dev/microcode/aic7xxx/aic79xx.seq @@ -1,4 +1,4 @@ -/* $OpenBSD: aic79xx.seq,v 1.5 2004/12/11 00:08:43 krw Exp $ */ +/* $OpenBSD: aic79xx.seq,v 1.6 2005/03/23 23:47:22 deraadt Exp $ */ /* * Adaptec U320 device driver firmware for Linux and FreeBSD. * @@ -41,7 +41,7 @@ * $FreeBSD: src/sys/dev/aic7xxx/aic79xx.seq,v 1.17 2004/08/04 17:55:34 gibbs Exp $ */ -VERSION = "$Id: aic79xx.seq,v 1.5 2004/12/11 00:08:43 krw Exp $" +VERSION = "$Id: aic79xx.seq,v 1.6 2005/03/23 23:47:22 deraadt Exp $" PATCH_ARG_LIST = "struct ahd_softc *ahd" PREFIX = "ahd_" @@ -125,7 +125,7 @@ idle_loop_check_nonpackreq: if ((ahd->bugs & AHD_FAINT_LED_BUG) != 0) { /* * On Rev A. hardware, the busy LED is only - * turned on automaically during selections + * turned on automatically during selections * and re-selections. Make the LED status * more useful by forcing it to be on so * long as one of our data FIFOs is active. @@ -619,7 +619,7 @@ select_in: if ((ahd->bugs & AHD_FAINT_LED_BUG) != 0) { /* * On Rev A. hardware, the busy LED is only - * turned on automaically during selections + * turned on automatically during selections * and re-selections. Make the LED status * more useful by forcing it to be on from * the point of selection until our idle @@ -672,7 +672,7 @@ BEGIN_CRITICAL; if ((ahd->bugs & AHD_FAINT_LED_BUG) != 0) { /* * On Rev A. hardware, the busy LED is only - * turned on automaically during selections + * turned on automatically during selections * and re-selections. Make the LED status * more useful by forcing it to be on from * the point of re-selection until our idle @@ -1913,7 +1913,7 @@ main_isr: * This happens between packets in a stream for a single L_Q. Since we * are not performing a pointer save, we can safely clear the channel * so it can be used for other transactions. On RTI capable controllers, - * where snapshots can, and are, disabled, the code to handle this type + * where snapshots can be, and are, disabled, the code to handle this type * of snapshot is not active. * * The second case is a save pointers on an active FIFO which occurs @@ -2172,7 +2172,7 @@ pkt_status_check_nonpackreq: /* * The unexpected nonpkt phase handler assumes that any * data channel use will have a FIFO reference count. It - * turns out that the status handler doesn't need a refernce + * turns out that the status handler doesn't need a reference * count since the status received flag, and thus completion * processing, cannot be set until the handler is finished. * We increment the count here to make the nonpkt handler |