diff options
Diffstat (limited to 'sys/dev/pci/if_de.c')
| -rw-r--r-- | sys/dev/pci/if_de.c | 459 |
1 files changed, 13 insertions, 446 deletions
diff --git a/sys/dev/pci/if_de.c b/sys/dev/pci/if_de.c index 67acad9c693..f01e8ddccf7 100644 --- a/sys/dev/pci/if_de.c +++ b/sys/dev/pci/if_de.c @@ -1,4 +1,4 @@ -/* $OpenBSD: if_de.c,v 1.75 2005/08/09 04:10:11 mickey Exp $ */ +/* $OpenBSD: if_de.c,v 1.76 2005/09/06 00:41:41 brad Exp $ */ /* $NetBSD: if_de.c,v 1.45 1997/06/09 00:34:18 thorpej Exp $ */ /*- @@ -37,7 +37,6 @@ * This driver supports the DEC DE435 or any other PCI * board which support 21040, 21041, or 21140 (mostly). */ -#define TULIP_HDR_DATA #include <sys/param.h> #include <sys/systm.h> @@ -53,9 +52,7 @@ #include <sys/timeout.h> #include <net/if.h> -#if defined(SIOCSIFMEDIA) && !defined(TULIP_NOIFMEDIA) #include <net/if_media.h> -#endif #include <net/if_types.h> #include <net/if_dl.h> #include <net/route.h> @@ -82,12 +79,11 @@ #include <dev/pci/pcivar.h> #include <dev/pci/pcidevs.h> #include <dev/ic/dc21040reg.h> -#define DEVAR_INCLUDE "dev/pci/if_devar.h" /* * Intel CPUs should use I/O mapped access. */ -#if defined(__i386__) || defined(TULIP_EISA) +#if defined(__i386__) #define TULIP_IOMAPPED #endif @@ -103,13 +99,9 @@ #define TULIP_PERFSTATS #endif -#if 0 -#define TULIP_USE_SOFTINTR -#endif - #define TULIP_HZ 10 -#include DEVAR_INCLUDE +#include <dev/pci/if_devar.h> /* * This module supports * the DEC 21040 PCI Ethernet Controller. @@ -132,10 +124,8 @@ static void tulip_mii_writereg(tulip_softc_t * const sc, unsigned devaddr, unsig static int tulip_mii_map_abilities(tulip_softc_t * const sc, unsigned abilities); static tulip_media_t tulip_mii_phy_readspecific(tulip_softc_t * const sc); static int tulip_srom_decode(tulip_softc_t * const sc); -#if defined(IFM_ETHER) static int tulip_ifmedia_change(struct ifnet * const ifp); static void tulip_ifmedia_status(struct ifnet * const ifp, struct ifmediareq *req); -#endif /* static void tulip_21140_map_media(tulip_softc_t *sc); */ static void @@ -166,30 +156,6 @@ tulip_timeout( timeout_add(&sc->tulip_stmo, (hz + TULIP_HZ / 2) / TULIP_HZ); } -#if defined(TULIP_NEED_FASTTIMEOUT) -static void -tulip_fasttimeout_callback( - void *arg) -{ - tulip_softc_t * const sc = arg; - tulip_spl_t s = TULIP_RAISESPL(); - - sc->tulip_flags &= ~TULIP_FASTTIMEOUTPENDING; - (sc->tulip_boardsw->bd_media_poll)(sc, TULIP_MEDIAPOLL_FASTTIMER); - TULIP_RESTORESPL(s); -} - -static void -tulip_fasttimeout( - tulip_softc_t * const sc) -{ - if (sc->tulip_flags & TULIP_FASTTIMEOUTPENDING) - return; - sc->tulip_flags |= TULIP_FASTTIMEOUTPENDING; - timeout_add(&sc->tulip_ftmo, 1); -} -#endif - static int tulip_txprobe( tulip_softc_t * const sc) @@ -231,11 +197,7 @@ tulip_txprobe( return 1; } -#ifdef BIG_PACKET -#define TULIP_SIAGEN_WATCHDOG (sc->tulip_if.if_mtu > ETHERMTU ? TULIP_WATCHDOG_RXDISABLE|TULIP_WATCHDOG_TXDISABLE : 0) -#else #define TULIP_SIAGEN_WATCHDOG 0 -#endif static void tulip_media_set( @@ -372,19 +334,6 @@ tulip_linkup( sc->tulip_flags |= TULIP_PRINTLINKUP; sc->tulip_flags |= TULIP_LINKUP; sc->tulip_if.if_flags &= ~IFF_OACTIVE; -#if 0 /* XXX how does with work with ifmedia? */ - if ((sc->tulip_flags & TULIP_DIDNWAY) == 0) { - if (sc->tulip_if.if_flags & IFF_FULLDUPLEX) { - if (TULIP_CAN_MEDIA_FD(media) - && sc->tulip_mediums[TULIP_FD_MEDIA_OF(media)] != NULL) - media = TULIP_FD_MEDIA_OF(media); - } else { - if (TULIP_IS_MEDIA_FD(media) - && sc->tulip_mediums[TULIP_HD_MEDIA_OF(media)] != NULL) - media = TULIP_HD_MEDIA_OF(media); - } - } -#endif if (sc->tulip_media != media) { #ifdef TULIP_DEBUG sc->tulip_dbg.dbg_last_media = sc->tulip_media; @@ -438,69 +387,6 @@ tulip_media_print( } } -#if defined(TULIP_DO_GPR_SENSE) -static tulip_media_t -tulip_21140_gpr_media_sense( - tulip_softc_t * const sc) -{ - tulip_media_t maybe_media = TULIP_MEDIA_UNKNOWN; - tulip_media_t last_media = TULIP_MEDIA_UNKNOWN; - tulip_media_t media; - - /* - * If one of the media blocks contained a default media flag, - * use that. - */ - for (media = TULIP_MEDIA_UNKNOWN; media < TULIP_MEDIA_MAX; media++) { - const tulip_media_info_t *mi; - /* - * Media is not supported (or is full-duplex). - */ - if ((mi = sc->tulip_mediums[media]) == NULL || TULIP_IS_MEDIA_FD(media)) - continue; - if (mi->mi_type != TULIP_MEDIAINFO_GPR) - continue; - - /* - * Remember the media is this is the "default" media. - */ - if (mi->mi_default && maybe_media == TULIP_MEDIA_UNKNOWN) - maybe_media = media; - - /* - * No activity mask? Can't see if it is active if there's no mask. - */ - if (mi->mi_actmask == 0) - continue; - - /* - * Does the activity data match? - */ - if ((TULIP_CSR_READ(sc, csr_gp) & mi->mi_actmask) != mi->mi_actdata) - continue; - -#if defined(TULIP_DEBUG) - printf(TULIP_PRINTF_FMT ": gpr_media_sense: %s: 0x%02x & 0x%02x == 0x%02x\n", - TULIP_PRINTF_ARGS, tulip_mediums[media], - TULIP_CSR_READ(sc, csr_gp) & 0xFF, - mi->mi_actmask, mi->mi_actdata); -#endif - /* - * It does! If this is the first media we detected, then - * remember this media. If isn't the first, then there were - * multiple matches which we equate to no match (since we don't - * which to select (if any). - */ - if (last_media == TULIP_MEDIA_UNKNOWN) { - last_media = media; - } else if (last_media != media) { - last_media = TULIP_MEDIA_UNKNOWN; - } - } - return (last_media != TULIP_MEDIA_UNKNOWN) ? last_media : maybe_media; -} -#endif /* TULIP_DO_GPR_SENSE */ - static tulip_link_status_t tulip_media_link_monitor( tulip_softc_t * const sc) @@ -722,32 +608,6 @@ tulip_media_poll( } if (sc->tulip_probe_state == TULIP_PROBE_GPRTEST) { -#if defined(TULIP_DO_GPR_SENSE) - /* - * Check for media via the general purpose register. - * - * Try to sense the media via the GPR. If the same value - * occurs 3 times in a row then just use that. - */ - if (sc->tulip_probe_timeout > 0) { - tulip_media_t new_probe_media = tulip_21140_gpr_media_sense(sc); -#if defined(TULIP_DEBUG) - printf(TULIP_PRINTF_FMT ": media_poll: gpr sensing = %s\n", - TULIP_PRINTF_ARGS, tulip_mediums[new_probe_media]); -#endif - if (new_probe_media != TULIP_MEDIA_UNKNOWN) { - if (new_probe_media == sc->tulip_probe_media) { - if (--sc->tulip_probe_count == 0) - tulip_linkup(sc, sc->tulip_probe_media); - } else { - sc->tulip_probe_count = 10; - } - } - sc->tulip_probe_media = new_probe_media; - tulip_timeout(sc); - return; - } -#endif /* TULIP_DO_GPR_SENSE */ /* * Brute force. We cycle through each of the media types * and try to transmit a packet. @@ -1256,19 +1116,6 @@ static const tulip_phy_attr_t tulip_mii_phy_attrlist[] = { "Seeq 80225" #endif }, -#if 0 - { 0x0015F420, 0, /* 00-A0-7D */ - { - { 0x12, 0x0010, 0x0000 }, /* 10T */ - { }, /* 100TX */ - { 0x12, 0x0010, 0x0010 }, /* 100T4 */ - { 0x12, 0x0008, 0x0008 }, /* FULL_DUPLEX */ - }, -#if defined(TULIP_DEBUG) - "Broadcom BCM5000" -#endif - }, -#endif { 0x0281F400, 0, /* 00-A0-BE */ { { 0x11, 0x8000, 0x0000 }, /* 10T */ @@ -2570,9 +2417,6 @@ tulip_srom_decode( if (data & TULIP_SROM_2114X_NOINDICATOR) { mi->mi_actmask = 0; } else { -#if 0 - mi->mi_default = (data & TULIP_SROM_2114X_DEFAULT) != 0; -#endif mi->mi_actmask = TULIP_SROM_2114X_BITPOS(data); mi->mi_actdata = (data & TULIP_SROM_2114X_POLARITY) ? 0 : mi->mi_actmask; } @@ -2767,16 +2611,6 @@ tulip_srom_decode( mi++; break; } -#if 0 - case 5: { /* 21143 Reset block */ - mi->mi_type = TULIP_MEDIAINFO_RESET; - mi->mi_reset_length = *dp++; - mi->mi_reset_offset = dp - sc->tulip_rombuf; - dp += 2 * mi->mi_reset_length; - mi++; - break; - } -#endif default: { } } @@ -2827,20 +2661,6 @@ tulip_read_macaddr( sc->tulip_rombuf[idx] = csr & 0xFF; } sc->tulip_boardsw = &tulip_21040_boardsw; -#if defined(TULIP_EISA) - } else if (sc->tulip_chipid == TULIP_DE425) { - int cnt; - for (idx = 0, cnt = 0; idx < sizeof(testpat) && cnt < 32; cnt++) { - tmpbuf[idx] = TULIP_CSR_READBYTE(sc, csr_enetrom); - if (tmpbuf[idx] == testpat[idx]) - ++idx; - else - idx = 0; - } - for (idx = 0; idx < 32; idx++) - sc->tulip_rombuf[idx] = TULIP_CSR_READBYTE(sc, csr_enetrom); - sc->tulip_boardsw = &tulip_21040_boardsw; -#endif /* TULIP_EISA */ } else { if (sc->tulip_chipid == TULIP_21041) { /* @@ -2857,18 +2677,7 @@ tulip_read_macaddr( sc->tulip_boardsw = &tulip_21140_eb_boardsw; } -#ifdef NEED_PCI_ETHER_HW_ADDR_FUNC - if(pci_ether_hw_addr(sc->tulip_pc, (u_char *)(&sc->tulip_rombuf), - sc->tulip_pci_busno, sc->tulip_pci_devno)) { - if(sc->tulip_boardsw == &tulip_21041_boardsw) - sc->tulip_boardsw = &tulip_21041np_boardsw; - } - else { - tulip_srom_read(sc); - } -#else tulip_srom_read(sc); -#endif if (tulip_srom_crcok(sc->tulip_rombuf)) { /* * SROM CRC is valid therefore it must be in the @@ -3037,7 +2846,6 @@ tulip_read_macaddr( return 0; } -#if defined(IFM_ETHER) static void tulip_ifmedia_add( tulip_softc_t * const sc) @@ -3112,7 +2920,6 @@ tulip_ifmedia_status( req->ifm_active = tulip_media_to_ifmedia[sc->tulip_media]; } -#endif static void tulip_addr_filter( @@ -3253,7 +3060,7 @@ tulip_reset( TULIP_CSR_WRITE(sc, csr_txlist, TULIP_KVATOPHYS(sc, &sc->tulip_txinfo.ri_first[0])); TULIP_CSR_WRITE(sc, csr_rxlist, TULIP_KVATOPHYS(sc, &sc->tulip_rxinfo.ri_first[0])); -#ifdef powerpc +#ifdef __powerpc__ TULIP_CSR_WRITE(sc, csr_busmode, (4 << 2) /* Descriptor skip length */ |TULIP_BUSMODE_CACHE_ALIGN8 @@ -3440,9 +3247,8 @@ tulip_rx_intr( break; /* - * It is possible (though improbable unless the BIG_PACKET support - * is enabled or MCLBYTES < 1518) for a received packet to cross - * more than one receive descriptor. + * It is possible (though improbable unless MCLBYTES < 1518) for + * a received packet to cross more than one receive descriptor. */ while ((DESC_BO(((volatile tulip_desc_t *) eop)->d_status) & TULIP_DSTS_RxLASTDESC) == 0) { if (++eop == ri->ri_last) @@ -3483,14 +3289,7 @@ tulip_rx_intr( */ total_len = ((DESC_BO(eop->d_status) >> 16) & 0x7FFF) - 4; if ((sc->tulip_flags & TULIP_RXIGNORE) == 0 - && ((DESC_BO(eop->d_status) & TULIP_DSTS_ERRSUM) == 0 -#ifdef BIG_PACKET - || (total_len <= sc->tulip_if.if_mtu + sizeof(struct ether_header) && - (DESC_BO(eop->d_status) & (TULIP_DSTS_RxBADLENGTH|TULIP_DSTS_RxRUNT| - TULIP_DSTS_RxCOLLSEEN|TULIP_DSTS_RxBADCRC| - TULIP_DSTS_RxOVERFLOW)) == 0) -#endif - )) { + && ((DESC_BO(eop->d_status) & TULIP_DSTS_ERRSUM) == 0)) { me->m_len = total_len - last_offset; eh = *mtod(ms, struct ether_header *); #if NBPFILTER > 0 @@ -3583,9 +3382,6 @@ tulip_rx_intr( ms->m_pkthdr.rcvif = ifp; ether_input(ifp, &eh, ms); #else -#ifdef BIG_PACKET -#error BIG_PACKET is incompatible with TULIP_COPY_RXDATA -#endif if (ms == me) bcopy(mtod(ms, caddr_t) + sizeof(struct ether_header), mtod(m0, caddr_t), total_len); @@ -3917,103 +3713,6 @@ tulip_intr_handler( TULIP_PERFEND(intr); } -#if defined(TULIP_USE_SOFTINTR) -/* - * This is a experimental idea to alleviate problems due to interrupt - * livelock. What is interrupt livelock? It's when you spend all your - * time servicing device interrupts and never drop below device ipl - * to do "useful" work. - * - * So what we do here is see if the device needs service and if so, - * disable interrupts (dismiss the interrupt), place it in a list of devices - * needing service, and issue a network software interrupt. - * - * When our network software interrupt routine gets called, we simply - * walk done the list of devices that we have created and deal with them - * at splnet/splsoftnet. - * - */ -static void -tulip_hardintr_handler( - tulip_softc_t * const sc, - int *progress_p) -{ - if (TULIP_CSR_READ(sc, csr_status) & (TULIP_STS_NORMALINTR|TULIP_STS_ABNRMLINTR) == 0) - return; - *progress_p = 1; - /* - * disable interrupts - */ - TULIP_CSR_WRITE(sc, csr_intr, 0); - /* - * mark it as needing a software interrupt - */ - tulip_softintr_mask |= (1U << sc->tulip_unit); -} - -static void -tulip_softintr( - void) -{ - u_int32_t softintr_mask, mask; - int progress = 0; - int unit; - tulip_spl_t s; - - /* - * Copy mask to local copy and reset global one to 0. - */ - s = TULIP_RAISESPL(); - softintr_mask = tulip_softintr_mask; - tulip_softintr_mask = 0; - TULIP_RESTORESPL(s); - - /* - * Optimize for the single unit case. - */ - if (tulip_softintr_max_unit == 0) { - if (softintr_mask & 1) { - tulip_softc_t * const sc = TULIP_UNIT_TO_SOFTC(0); - /* - * Handle the "interrupt" and then reenable interrupts - */ - softintr_mask = 0; - tulip_intr_handler(sc, &progress); - TULIP_CSR_WRITE(sc, csr_intr, sc->tulip_intrmask); - } - return; - } - - /* - * Handle all "queued" interrupts in a round robin fashion. - * This is done so as not to favor a particular interface. - */ - unit = tulip_softintr_last_unit; - mask = (1U << unit); - while (softintr_mask != 0) { - if (tulip_softintr_max_unit == unit) { - unit = 0; mask = 1; - } else { - unit += 1; mask <<= 1; - } - if (softintr_mask & mask) { - tulip_softc_t * const sc = TULIP_UNIT_TO_SOFTC(unit); - /* - * Handle the "interrupt" and then reenable interrupts - */ - softintr_mask ^= mask; - tulip_intr_handler(sc, &progress); - TULIP_CSR_WRITE(sc, csr_intr, sc->tulip_intrmask); - } - } - - /* - * Save where we ending up. - */ - tulip_softintr_last_unit = unit; -} -#endif /* TULIP_USE_SOFTINTR */ - static tulip_intrfunc_t tulip_intr_shared( void *arg) @@ -4025,19 +3724,9 @@ tulip_intr_shared( #if defined(TULIP_DEBUG) sc->tulip_dbg.dbg_intrs++; #endif -#if defined(TULIP_USE_SOFTINTR) - tulip_hardintr_handler(sc, &progress); -#else tulip_intr_handler(sc, &progress); -#endif } -#if defined(TULIP_USE_SOFTINTR) - if (progress) - schednetisr(NETISR_DE); -#endif -#if !defined(TULIP_VOID_INTRFUNC) return progress; -#endif } static tulip_intrfunc_t @@ -4050,16 +3739,9 @@ tulip_intr_normal( #if defined(TULIP_DEBUG) sc->tulip_dbg.dbg_intrs++; #endif -#if defined(TULIP_USE_SOFTINTR) - tulip_hardintr_handler(sc, &progress); - if (progress) - schednetisr(NETISR_DE); -#else tulip_intr_handler(sc, &progress); -#endif -#if !defined(TULIP_VOID_INTRFUNC) + return progress; -#endif } static struct mbuf * @@ -4067,7 +3749,7 @@ tulip_mbuf_compress( struct mbuf *m) { struct mbuf *m0; -#if MCLBYTES >= ETHERMTU + 18 && !defined(BIG_PACKET) +#if MCLBYTES >= ETHERMTU + 18 MGETHDR(m0, M_DONTWAIT, MT_DATA); if (m0 != NULL) { if (m->m_pkthdr.len > MHLEN) { @@ -4174,11 +3856,6 @@ tulip_txput( while (len > 0) { unsigned slen = min(len, clsize); -#ifdef BIG_PACKET - int partial = 0; - if (slen >= 2048) - slen = 2040, partial = 1; -#endif segcnt++; if (segcnt > TULIP_MAX_TXSEG) { /* @@ -4259,10 +3936,6 @@ tulip_txput( d_status = TULIP_DSTS_OWNER; len -= slen; addr += slen; -#ifdef BIG_PACKET - if (partial) - continue; -#endif clsize = PAGE_SIZE; } } while ((m0 = m0->m_next) != NULL); @@ -4466,11 +4139,8 @@ tulip_txput_setup( } } - /* - * This routine is entered at splnet() (splsoftnet() on OpenBSD) - * and thereby imposes no problems when TULIP_USE_SOFTINTR is - * defined or not. + * This routine is entered at splnet(). */ static int tulip_ifioctl( @@ -4485,11 +4155,8 @@ tulip_ifioctl( tulip_spl_t s; int error = 0; -#if defined(TULIP_USE_SOFTINTR) - s = TULIP_RAISESOFTSPL(); -#else s = TULIP_RAISESPL(); -#endif + switch (cmd) { case SIOCSIFADDR: { ifp->if_flags |= IFF_UP; @@ -4517,44 +4184,15 @@ tulip_ifioctl( } case SIOCSIFFLAGS: { -#if !defined(IFM_ETHER) - int flags = 0; - if (ifp->if_flags & IFF_LINK0) flags |= 1; - if (ifp->if_flags & IFF_LINK1) flags |= 2; - if (ifp->if_flags & IFF_LINK2) flags |= 4; - if (flags == 7) { - ifp->if_flags &= ~(IFF_LINK0|IFF_LINK1|IFF_LINK2); - sc->tulip_media = TULIP_MEDIA_UNKNOWN; - sc->tulip_probe_state = TULIP_PROBE_INACTIVE; - sc->tulip_flags &= ~(TULIP_WANTRXACT|TULIP_LINKUP|TULIP_NOAUTOSENSE); - tulip_reset(sc); - } else if (flags) { - tulip_media_t media; - for (media = TULIP_MEDIA_UNKNOWN; media < TULIP_MEDIA_MAX; media++) { - if (sc->tulip_mediums[media] != NULL && --flags == 0) { - sc->tulip_flags |= TULIP_NOAUTOSENSE; - if (sc->tulip_media != media || (sc->tulip_flags & TULIP_DIDNWAY)) { - sc->tulip_flags &= ~TULIP_DIDNWAY; - tulip_linkup(sc, media); - } - break; - } - } - if (flags) - printf(TULIP_PRINTF_FMT ": ignored invalid media request\n", TULIP_PRINTF_ARGS); - } -#endif tulip_init(sc); break; } -#if defined(SIOCSIFMEDIA) case SIOCSIFMEDIA: case SIOCGIFMEDIA: { error = ifmedia_ioctl(ifp, ifr, &sc->tulip_ifmedia, cmd); break; } -#endif case SIOCADDMULTI: case SIOCDELMULTI: { @@ -4579,21 +4217,11 @@ tulip_ifioctl( /* * Set the interface MTU. */ - if (ifr->ifr_mtu > ETHERMTU -#ifdef BIG_PACKET - && sc->tulip_chipid != TULIP_21140 - && sc->tulip_chipid != TULIP_21140A - && sc->tulip_chipid != TULIP_21041 -#endif - ) { + if (ifr->ifr_mtu > ETHERMTU) { error = EINVAL; break; } ifp->if_mtu = ifr->ifr_mtu; -#ifdef BIG_PACKET - tulip_reset(sc); - tulip_init(sc); -#endif break; #ifdef SIOCGADDRROM @@ -4626,9 +4254,7 @@ tulip_ifioctl( * copy and modify the mbuf passed. */ /* - * These routines gets called at device spl (from ether_output). This might - * pose a problem for TULIP_USE_SOFTINTR if ether_output is called at - * device spl from another driver. + * These routines gets called at device spl (from ether_output). */ static ifnet_ret_t @@ -4680,13 +4306,6 @@ tulip_ifstart_one( TULIP_PERFEND(ifstart_one); } -/* - * Even though this routine runs at device spl, it does not break - * our use of splnet (splsoftnet under OpenBSD) for the majority - * of this driver (if TULIP_USE_SOFTINTR defined) since - * if_watcbog is called from if_watchdog which is called from - * splsoftclock which is below spl[soft]net. - */ static void tulip_ifwatchdog( struct ifnet *ifp) @@ -4770,9 +4389,6 @@ tulip_ifwatchdog( #ifdef printf #undef printf #endif -#if !defined(IFF_NOTRAILERS) -#define IFF_NOTRAILERS 0 -#endif static void tulip_attach( @@ -4787,9 +4403,6 @@ tulip_attach( ifp->if_timer = 1; timeout_set(&sc->tulip_stmo, tulip_timeout_callback, sc); -#if defined(TULIP_NEED_FASTTIMEOUT) - timeout_set(&sc->tulip_ftmo, tulip_fasttimeout_callback, sc); -#endif printf( TULIP_PRINTF_FMT ": %s%s pass %d.%d%s address " TULIP_EADDR_FMT "\n", @@ -4807,33 +4420,11 @@ tulip_attach( TULIP_EADDR_ARGS(sc->tulip_enaddr)); (*sc->tulip_boardsw->bd_media_probe)(sc); -#if defined(IFM_ETHER) ifmedia_init(&sc->tulip_ifmedia, 0, tulip_ifmedia_change, tulip_ifmedia_status); -#else - { - tulip_media_t media; - int cnt; - printf(TULIP_PRINTF_FMT ": media:", TULIP_PRINTF_ARGS); - for (media = TULIP_MEDIA_UNKNOWN, cnt = 1; cnt < 7 && media < TULIP_MEDIA_MAX; media++) { - if (sc->tulip_mediums[media] != NULL) { - printf(" %d=\"%s\"", cnt, tulip_mediums[media]); - cnt++; - } - } - if (cnt == 1) { - sc->tulip_features |= TULIP_HAVE_NOMEDIA; - printf(" none\n"); - } else { - printf("\n"); - } - } -#endif sc->tulip_flags &= ~TULIP_DEVICEPROBE; -#if defined(IFM_ETHER) tulip_ifmedia_add(sc); -#endif tulip_reset(sc); @@ -4868,9 +4459,6 @@ tulip_initcsrs( sc->tulip_csrs.csr_13 = csr_base + 13 * csr_size; sc->tulip_csrs.csr_14 = csr_base + 14 * csr_size; sc->tulip_csrs.csr_15 = csr_base + 15 * csr_size; -#if defined(TULIP_EISA) - sc->tulip_csrs.csr_enetrom = csr_base + DE425_ENETROM_OFFSET; -#endif } static void @@ -4894,19 +4482,6 @@ tulip_initring( descs = (tulip_desc_t *)TULIP_KVATOPHYS(sc, descs); descs = (tulip_desc_t *)PHYS_TO_UNCACHED((int)descs & 0x3fffffff); #endif -#ifdef PPC_MPC106_BUG - /* - * This is a workaround for the powerpc MPC106 chip not snooping - * accesses to the descriptor area correctly. - */ - tulip_desc_t *xdesc = descs; - xdesc = (tulip_desc_t *)(roundup((int)descs, 32) - 4); - if(xdesc < descs) { - ndescs--; - xdesc++; - } - descs = xdesc; -#endif ri->ri_max = ndescs; ri->ri_first = descs; ri->ri_last = ri->ri_first + ri->ri_max; @@ -4935,10 +4510,6 @@ tulip_initring( #define PCI_CFIT 0x3c /* Configuration Interrupt */ #define PCI_CFDA 0x40 /* Configuration Driver Area */ -#if defined(TULIP_EISA) -static const int tulip_eisa_irqs[4] = { IRQ5, IRQ9, IRQ10, IRQ11 }; -#endif - #define TULIP_PCI_ATTACH_ARGS struct device * const parent, struct device * const self, void * const aux #define TULIP_SHUTDOWN_ARGS void *arg static int @@ -5153,10 +4724,6 @@ tulip_pci_attach(TULIP_PCI_ATTACH_ARGS) if (sc->tulip_ats == NULL) printf("%s: warning: couldn't establish shutdown hook\n", sc->tulip_xname); -#if defined(TULIP_USE_SOFTINTR) - if (sc->tulip_unit > tulip_softintr_max_unit) - tulip_softintr_max_unit = sc->tulip_unit; -#endif s = TULIP_RAISESPL(); tulip_attach(sc); |