diff options
Diffstat (limited to 'sys/dev/pci/if_lmcioctl.h')
| -rw-r--r-- | sys/dev/pci/if_lmcioctl.h | 181 |
1 files changed, 134 insertions, 47 deletions
diff --git a/sys/dev/pci/if_lmcioctl.h b/sys/dev/pci/if_lmcioctl.h index f1921d1f502..dbd98942bba 100644 --- a/sys/dev/pci/if_lmcioctl.h +++ b/sys/dev/pci/if_lmcioctl.h @@ -1,6 +1,6 @@ -/* $NetBSD: if_lmcioctl.h,v 1.2 1999/03/25 04:09:34 explorer Exp $ */ +/* $Id: if_lmcioctl.h,v 1.2 1999/10/26 23:47:15 chris Exp $ */ -/*- +/* * Copyright (c) 1997-1999 LAN Media Corporation (LMC) * All rights reserved. www.lanmedia.com * @@ -39,6 +39,7 @@ */ #if defined(linux) +#include <linux/types.h> /* * IOCTLs that we use for linux. The structures passed in really should * go into an OS inspecific file, since BSD will use these as well. @@ -46,8 +47,21 @@ * Under linux, the 16 reserved-for-device IOCTLs are numbered 0x89f0 * through 0x89ff. */ -#define LMCIOCGINFO 0x89f0 /* get current state */ -#define LMCIOCSINFO 0x89f1 /* set state to user provided values */ +#define LMCIOCGINFO SIOCDEVPRIVATE+3 /* get current state */ +#define LMCIOCSINFO SIOCDEVPRIVATE+4 /* set state to user values */ +#define LMCIOCSKEEPALIVE SIOCDEVPRIVATE+5 /* Turn keepalives on/off */ +#ifdef LMC_DEBUG_FILE +#define LMCIOCLEARSTATS LMCIOCSINFO + 1 /* Clear debug stats */ +#endif +#ifdef LMC_BAZ +#define LMCIOCGETLMCSTATS LMCIOCSINFO + 3 +#define LMCIOCCLEARLMCSTATS LMCIOCSINFO + 4 +#define LMCIOCDUMPEVENTLOG LMCIOCSINFO + 5 +#define LMCIOCGETXINFO LMCIOCSINFO + 6 +#define LMCIOCREADLEDS LMCIOCSINFO + 7 +#define LMCIOCSETLEDS LMCIOCSINFO + 8 +#define LMCIOCRESET LMCIOCSINFO + 9 +#endif #else /* @@ -82,13 +96,22 @@ struct lmc___ctl { u_int32_t keepalive_onoff; /* protocol */ u_int32_t ticks; /* ticks/sec */ union { - lmc_av9110_t t1; + lmc_av9110_t ssi; } cardspec; + u_int32_t circuit_type; /* T1 or E1 */ }; +#define LMC_CARDTYPE_UNKNOWN -1 +#define LMC_CARDTYPE_HSSI 1 /* probed card is a HSSI card */ +#define LMC_CARDTYPE_DS3 2 /* probed card is a DS3 card */ +#define LMC_CARDTYPE_SSI 3 /* probed card is a SSI card */ +#define LMC_CARDTYPE_T1 4 /* probed card is a T1 card */ + + #define LMC_CTL_CARDTYPE_LMC5200 0 /* HSSI */ #define LMC_CTL_CARDTYPE_LMC5245 1 /* DS3 */ -#define LMC_CTL_CARDTYPE_LMC1000 2 /* T1, E1, etc */ +#define LMC_CTL_CARDTYPE_LMC1000 2 /* SSI, V.35 */ +#define LMC_CTL_CARDTYPE_LMC1200 3 /* DS1 */ #define LMC_CTL_OFF 0 /* generic OFF value */ #define LMC_CTL_ON 1 /* generic ON value */ @@ -98,10 +121,16 @@ struct lmc___ctl { #define LMC_CTL_CRC_LENGTH_16 16 #define LMC_CTL_CRC_LENGTH_32 32 +#define LMC_CTL_CRC_BYTESIZE_2 2 +#define LMC_CTL_CRC_BYTESIZE_4 4 + #define LMC_CTL_CABLE_LENGTH_LT_100FT 0 /* DS3 cable < 100 feet */ #define LMC_CTL_CABLE_LENGTH_GT_100FT 1 /* DS3 cable >= 100 feet */ +#define LMC_CTL_CIRCUIT_TYPE_E1 0 +#define LMC_CTL_CIRCUIT_TYPE_T1 1 + /* * These are not in the least IOCTL related, but I want them common. */ @@ -124,29 +153,29 @@ struct lmc___ctl { /* * T1 GPIO assignments */ -#define LMC_GEP_T1_GENERATOR 0x04 /* 2: enable prog freq gen serial i/f */ -#define LMC_GEP_T1_TXCLOCK 0x08 /* 3: provide clock on TXCLOCK output */ +#define LMC_GEP_SSI_GENERATOR 0x04 /* 2: enable prog freq gen serial i/f */ +#define LMC_GEP_SSI_TXCLOCK 0x08 /* 3: provide clock on TXCLOCK output */ /* * Common MII16 bits */ -#define LMC_MII16_LED0 0x0080 -#define LMC_MII16_LED1 0x0100 -#define LMC_MII16_LED2 0x0200 -#define LMC_MII16_LED3 0x0400 /* Error, and the red one */ -#define LMC_MII16_LED_ALL 0x0780 /* LED bit mask */ -#define LMC_MII16_FIFO_RESET 0x0800 +#define LMC_MII16_LED0 0x0080 +#define LMC_MII16_LED1 0x0100 +#define LMC_MII16_LED2 0x0200 +#define LMC_MII16_LED3 0x0400 /* Error, and the red one */ +#define LMC_MII16_LED_ALL 0x0780 /* LED bit mask */ +#define LMC_MII16_FIFO_RESET 0x0800 /* * definitions for HSSI */ -#define LMC_MII16_HSSI_TA 0x0001 -#define LMC_MII16_HSSI_CA 0x0002 -#define LMC_MII16_HSSI_LA 0x0004 -#define LMC_MII16_HSSI_LB 0x0008 -#define LMC_MII16_HSSI_LC 0x0010 -#define LMC_MII16_HSSI_TM 0x0020 -#define LMC_MII16_HSSI_CRC 0x0040 +#define LMC_MII16_HSSI_TA 0x0001 +#define LMC_MII16_HSSI_CA 0x0002 +#define LMC_MII16_HSSI_LA 0x0004 +#define LMC_MII16_HSSI_LB 0x0008 +#define LMC_MII16_HSSI_LC 0x0010 +#define LMC_MII16_HSSI_TM 0x0020 +#define LMC_MII16_HSSI_CRC 0x0040 /* * assignments for the MII register 16 (DS3) @@ -161,50 +190,108 @@ struct lmc___ctl { #define LMC_MII16_DS3_CRC 0x1000 #define LMC_MII16_DS3_SCRAM 0x2000 +/* Note: 2 pairs of LEDs where swapped by mistake + * in Xilinx code for DS3 & DS1 adapters */ +#define LMC_DS3_LED0 0x0100 /* bit 08 yellow */ +#define LMC_DS3_LED1 0x0080 /* bit 07 blue */ +#define LMC_DS3_LED2 0x0400 /* bit 10 green */ +#define LMC_DS3_LED3 0x0200 /* bit 09 red */ + +/* + * framer register 0 and 7 (7 is latched and reset on read) + */ +#define LMC_FRAMER_REG0_DLOS 0x80 /* digital loss of service */ +#define LMC_FRAMER_REG0_OOFS 0x40 /* out of frame sync */ +#define LMC_FRAMER_REG0_AIS 0x20 /* alarm indication signal */ +#define LMC_FRAMER_REG0_CIS 0x10 /* channel idle */ +#define LMC_FRAMER_REG0_LOC 0x08 /* loss of clock */ + + /* - * And T1 + * And SSI, LMC1000 */ -#define LMC_MII16_T1_DTR 0x0001 /* DTR output RW */ -#define LMC_MII16_T1_DSR 0x0002 /* DSR input RO */ -#define LMC_MII16_T1_RTS 0x0004 /* RTS output RW */ -#define LMC_MII16_T1_CTS 0x0008 /* CTS input RO */ -#define LMC_MII16_T1_DCD 0x0010 /* DCD input RO */ -#define LMC_MII16_T1_RI 0x0020 /* RI input RO */ -#define LMC_MII16_T1_CRC 0x0040 /* CRC select */ +#define LMC_MII16_SSI_DTR 0x0001 /* DTR output RW */ +#define LMC_MII16_SSI_DSR 0x0002 /* DSR input RO */ +#define LMC_MII16_SSI_RTS 0x0004 /* RTS output RW */ +#define LMC_MII16_SSI_CTS 0x0008 /* CTS input RO */ +#define LMC_MII16_SSI_DCD 0x0010 /* DCD input RO */ +#define LMC_MII16_SSI_RI 0x0020 /* RI input RO */ +#define LMC_MII16_SSI_CRC 0x1000 /* CRC select - RW */ /* * bits 0x0080 through 0x0800 are generic, and described * above with LMC_MII16_LED[0123] _LED_ALL, and _FIFO_RESET */ -#define LMC_MII16_T1_LL 0x1000 /* LL output RW */ -#define LMC_MII16_T1_RL 0x2000 /* RL output RW */ -#define LMC_MII16_T1_TM 0x4000 /* TM input RO */ -#define LMC_MII16_T1_LOOP 0x8000 /* loopback enable RW */ +#define LMC_MII16_SSI_LL 0x1000 /* LL output RW */ +#define LMC_MII16_SSI_RL 0x2000 /* RL output RW */ +#define LMC_MII16_SSI_TM 0x4000 /* TM input RO */ +#define LMC_MII16_SSI_LOOP 0x8000 /* loopback enable RW */ /* * Some of the MII16 bits are mirrored in the MII17 register as well, * but let's keep thing seperate for now, and get only the cable from * the MII17. */ -#define LMC_MII17_T1_CABLE_MASK 0x0038 /* mask to extract the cable type */ -#define LMC_MII17_T1_CABLE_SHIFT 3 /* shift to extract the cable type */ +#define LMC_MII17_SSI_CABLE_MASK 0x0038 /* mask to extract the cable type */ +#define LMC_MII17_SSI_CABLE_SHIFT 3 /* shift to extract the cable type */ /* - * framer register 0 and 7 (7 is latched and reset on read) + * And T1, LMC1200 */ -#define LMC_FRAMER_REG0_DLOS 0x80 /* digital loss of service */ -#define LMC_FRAMER_REG0_OOFS 0x40 /* out of frame sync */ -#define LMC_FRAMER_REG0_AIS 0x20 /* alarm indication signal */ -#define LMC_FRAMER_REG0_CIS 0x10 /* channel idle */ -#define LMC_FRAMER_REG0_LOC 0x08 /* loss of clock */ +#define LMC_MII16_T1_UNUSED1 0x0003 +#define LMC_MII16_T1_XOE 0x0004 +#define LMC_MII16_T1_RST 0x0008 /* T1 chip reset - RW */ +#define LMC_MII16_T1_Z 0x0010 /* output impedance T1=1, E1=0 output - RW */ +#define LMC_MII16_T1_INTR 0x0020 /* interrupt from 8370 - RO */ +#define LMC_MII16_T1_ONESEC 0x0040 /* one second square wave - ro */ + +#define LMC_MII16_T1_LED0 0x0100 +#define LMC_MII16_T1_LED1 0x0080 +#define LMC_MII16_T1_LED2 0x0400 +#define LMC_MII16_T1_LED3 0x0200 +#define LMC_MII16_T1_FIFO_RESET 0x0800 + +#define LMC_MII16_T1_CRC 0x1000 /* CRC select - RW */ +#define LMC_MII16_T1_UNUSED2 0xe000 + -#define LMC_CARDTYPE_UNKNOWN -1 -#define LMC_CARDTYPE_HSSI 1 /* probed card is a HSSI card */ -#define LMC_CARDTYPE_DS3 2 /* probed card is a DS3 card */ -#define LMC_CARDTYPE_T1 3 /* probed card is a T1 card */ +/* 8370 framer registers */ -#if defined(LMC_IS_KERNEL) /* defined in if_lmc_types.h */ +#define T1FRAMER_ALARM1_STATUS 0x47 +#define T1FRAMER_ALARM2_STATUS 0x48 +#define T1FRAMER_FERR_LSB 0x50 +#define T1FRAMER_FERR_MSB 0x51 /* framing bit error counter */ +#define T1FRAMER_LCV_LSB 0x54 +#define T1FRAMER_LCV_MSB 0x55 /* line code violation counter */ +#define T1FRAMER_AERR 0x5A +/* mask for the above AERR register */ +#define T1FRAMER_LOF_MASK (0x0f0) /* receive loss of frame */ +#define T1FRAMER_COFA_MASK (0x0c0) /* change of frame alignment */ +#define T1FRAMER_SEF_MASK (0x03) /* severely errored frame */ + +/* 8370 framer register ALM1 (0x47) values + * used to determine link status + */ + +#define T1F_SIGFRZ 0x01 /* signaling freeze */ +#define T1F_RLOF 0x02 /* receive loss of frame alignment */ +#define T1F_RLOS 0x04 /* receive loss of signal */ +#define T1F_RALOS 0x08 /* receive analog loss of signal or RCKI loss of clock */ +#define T1F_RAIS 0x10 /* receive alarm indication signal */ +#define T1F_UNUSED 0x20 +#define T1F_RYEL 0x40 /* receive yellow alarm */ +#define T1F_RMYEL 0x80 /* receive multiframe yellow alarm */ + +/* ------------------ end T1 defs ------------------- */ + +#define LMC_MII_LedMask 0x0780 +#define LMC_MII_LedBitPos 7 + +/* + * OpenBSD, NetBSD uses _KERNEL, FreeBSD uses KERNEL. + */ +#if defined(_KERNEL) || defined(KERNEL) || defined(__KERNEL__) /* * media independent methods to check on media status, link, light LEDs, * etc. @@ -220,6 +307,7 @@ struct lmc___media { int (* get_link_status)(lmc_softc_t * const); void (* set_link_status)(lmc_softc_t * const, int); void (* set_crc_length)(lmc_softc_t * const, int); + void (* set_circuit_type)(lmc_softc_t * const, int); }; u_int32_t lmc_mii_readreg(lmc_softc_t * const sc, u_int32_t devaddr, @@ -239,5 +327,4 @@ int lmc_read_macaddr(lmc_softc_t * const sc); void lmc_attach(lmc_softc_t * const sc); void lmc_initring(lmc_softc_t * const sc, lmc_ringinfo_t * const ri, tulip_desc_t *descs, int ndescs); - #endif /* LMC_IS_KERNEL */ |