diff options
Diffstat (limited to 'sys/dev/pci/if_pn.c')
| -rw-r--r-- | sys/dev/pci/if_pn.c | 38 |
1 files changed, 1 insertions, 37 deletions
diff --git a/sys/dev/pci/if_pn.c b/sys/dev/pci/if_pn.c index e772778120e..9ef43fcc22f 100644 --- a/sys/dev/pci/if_pn.c +++ b/sys/dev/pci/if_pn.c @@ -1,4 +1,4 @@ -/* $OpenBSD: if_pn.c,v 1.3 1999/02/27 18:44:58 jason Exp $ */ +/* $OpenBSD: if_pn.c,v 1.4 1999/03/03 22:51:48 jason Exp $ */ /* * Copyright (c) 1997, 1998 @@ -92,7 +92,6 @@ #endif /* FreeBSD */ #ifdef __OpenBSD__ -#define bootverbose 0 #include <vm/vm.h> /* for vtophys */ #include <vm/pmap.h> /* for vtophys */ #include <sys/device.h> @@ -512,34 +511,23 @@ static void pn_getmode_mii(sc) ifp = &sc->arpcom.ac_if; bmsr = pn_phy_readreg(sc, PHY_BMSR); - if (bootverbose) - printf("pn%d: PHY status word: %x\n", sc->pn_unit, bmsr); /* fallback */ sc->ifmedia.ifm_media = IFM_ETHER|IFM_10_T|IFM_HDX; if (bmsr & PHY_BMSR_10BTHALF) { - if (bootverbose) - printf("pn%d: 10Mbps half-duplex mode supported\n", - sc->pn_unit); ifmedia_add(&sc->ifmedia, IFM_ETHER|IFM_10_T|IFM_HDX, 0, NULL); ifmedia_add(&sc->ifmedia, IFM_ETHER|IFM_10_T, 0, NULL); } if (bmsr & PHY_BMSR_10BTFULL) { - if (bootverbose) - printf("pn%d: 10Mbps full-duplex mode supported\n", - sc->pn_unit); ifmedia_add(&sc->ifmedia, IFM_ETHER|IFM_10_T|IFM_FDX, 0, NULL); sc->ifmedia.ifm_media = IFM_ETHER|IFM_10_T|IFM_FDX; } if (bmsr & PHY_BMSR_100BTXHALF) { - if (bootverbose) - printf("pn%d: 100Mbps half-duplex mode supported\n", - sc->pn_unit); ifp->if_baudrate = 100000000; ifmedia_add(&sc->ifmedia, IFM_ETHER|IFM_100_TX, 0, NULL); ifmedia_add(&sc->ifmedia, @@ -548,9 +536,6 @@ static void pn_getmode_mii(sc) } if (bmsr & PHY_BMSR_100BTXFULL) { - if (bootverbose) - printf("pn%d: 100Mbps full-duplex mode supported\n", - sc->pn_unit); ifp->if_baudrate = 100000000; ifmedia_add(&sc->ifmedia, IFM_ETHER|IFM_100_TX|IFM_FDX, 0, NULL); @@ -559,23 +544,16 @@ static void pn_getmode_mii(sc) /* Some also support 100BaseT4. */ if (bmsr & PHY_BMSR_100BT4) { - if (bootverbose) - printf("pn%d: 100baseT4 mode supported\n", sc->pn_unit); ifp->if_baudrate = 100000000; ifmedia_add(&sc->ifmedia, IFM_ETHER|IFM_100_T4, 0, NULL); sc->ifmedia.ifm_media = IFM_ETHER|IFM_100_T4; #ifdef FORCE_AUTONEG_TFOUR - if (bootverbose) - printf("pn%d: forcing on autoneg support for BT4\n", - sc->pn_unit); ifmedia_add(&sc->ifmedia, IFM_ETHER|IFM_AUTO, 0 NULL): sc->ifmedia.ifm_media = IFM_ETHER|IFM_AUTO; #endif } if (bmsr & PHY_BMSR_CANAUTONEG) { - if (bootverbose) - printf("pn%d: autoneg supported\n", sc->pn_unit); ifmedia_add(&sc->ifmedia, IFM_ETHER|IFM_AUTO, 0, NULL); sc->ifmedia.ifm_media = IFM_ETHER|IFM_AUTO; } @@ -1003,12 +981,7 @@ pn_attach(config_id, unit) ifp->if_baudrate = 10000000; ifp->if_snd.ifq_maxlen = PN_TX_LIST_CNT - 1; - if (bootverbose) - printf("pn%d: probing for a PHY\n", sc->pn_unit); for (i = PN_PHYADDR_MIN; i < PN_PHYADDR_MAX + 1; i++) { - if (bootverbose) - printf("pn%d: checking address: %d\n", - sc->pn_unit, i); sc->pn_phy_addr = i; pn_phy_writereg(sc, PHY_BMCR, PHY_BMCR_RESET); DELAY(500); @@ -1020,12 +993,6 @@ pn_attach(config_id, unit) if (phy_sts) { phy_vid = pn_phy_readreg(sc, PHY_VENID); phy_did = pn_phy_readreg(sc, PHY_DEVID); - if (bootverbose) - printf("pn%d: found PHY at address %d, ", - sc->pn_unit, sc->pn_phy_addr); - if (bootverbose) - printf("vendor id: %x device id: %x\n", - phy_vid, phy_did); p = pn_phys; while(p->pn_vid) { if (phy_vid == p->pn_vid && @@ -1037,9 +1004,6 @@ pn_attach(config_id, unit) } if (sc->pn_pinfo == NULL) sc->pn_pinfo = &pn_phys[PHY_UNKNOWN]; - if (bootverbose) - printf("pn%d: PHY type: %s\n", - sc->pn_unit, sc->pn_pinfo->pn_name); } else { printf("pn%d: MII without any phy!\n", sc->pn_unit); goto fail; |