diff options
Diffstat (limited to 'sys/dev/pci')
| -rw-r--r-- | sys/dev/pci/if_bge.c | 23 | ||||
| -rw-r--r-- | sys/dev/pci/if_bgereg.h | 3 |
2 files changed, 19 insertions, 7 deletions
diff --git a/sys/dev/pci/if_bge.c b/sys/dev/pci/if_bge.c index a09f364e503..6050e2724b8 100644 --- a/sys/dev/pci/if_bge.c +++ b/sys/dev/pci/if_bge.c @@ -1,4 +1,4 @@ -/* $OpenBSD: if_bge.c,v 1.173 2006/08/28 07:58:51 kettenis Exp $ */ +/* $OpenBSD: if_bge.c,v 1.174 2006/08/29 17:44:16 kettenis Exp $ */ /* * Copyright (c) 2001 Wind River Systems @@ -1084,9 +1084,11 @@ bge_chipinit(struct bge_softc *sc) /* * Check the 'ROM failed' bit on the RX CPU to see if - * self-tests passed. + * self-tests passed. Skip this check when there's no SEEPROM + * fitted, since in that case it will always fail. */ - if (CSR_READ_4(sc, BGE_RXCPU_MODE) & BGE_RXCPUMODE_ROMFAIL) { + if (sc->bge_eeprom && + CSR_READ_4(sc, BGE_RXCPU_MODE) & BGE_RXCPUMODE_ROMFAIL) { printf("%s: RX CPU self-diagnostics failed!\n", sc->bge_dev.dv_xname); return (ENODEV); @@ -1757,6 +1759,14 @@ bge_attach(struct device *parent, struct device *self, void *aux) BGE_PCISTATE_PCI_BUSMODE) == 0) sc->bge_pcix = 1; + /* + * SEEPROM check. + */ + sc->bge_eeprom = 1; + if ((pci_conf_read(pa->pa_pc, pa->pa_tag, BGE_PCI_SUBSYS) & 0xffff) == + PCI_VENDOR_SUN) + sc->bge_eeprom = 0; + /* Try to reset the chip. */ DPRINTFN(5, ("bge_reset\n")); bge_reset(sc); @@ -1899,7 +1909,7 @@ bge_attach(struct device *parent, struct device *self, void *aux) */ if (bge_readmem_ind(sc, BGE_SOFTWARE_GENCOMM_SIG) == BGE_MAGIC_NUMBER) hwcfg = bge_readmem_ind(sc, BGE_SOFTWARE_GENCOMM_NICCFG); - else { + else if (sc->bge_eeprom) { if (bge_read_eeprom(sc, (caddr_t)&hwcfg, BGE_EE_HWCFG_OFFSET, sizeof(hwcfg))) { printf(": failed to read media type\n"); @@ -2059,7 +2069,8 @@ bge_reset(struct bge_softc *sc) * Poll the value location we just wrote until * we see the 1's complement of the magic number. * This indicates that the firmware initialization - * is complete. + * is complete. We expect this to fail if no SEEPROM + * is fitted. */ for (i = 0; i < BGE_TIMEOUT; i++) { val = bge_readmem_ind(sc, BGE_SOFTWARE_GENCOMM); @@ -2068,7 +2079,7 @@ bge_reset(struct bge_softc *sc) DELAY(10); } - if (i >= BGE_TIMEOUT) + if (sc->bge_eeprom && i >= BGE_TIMEOUT) printf("%s: firmware handshake timed out\n", sc->bge_dev.dv_xname); diff --git a/sys/dev/pci/if_bgereg.h b/sys/dev/pci/if_bgereg.h index 0dbc86b3ae7..22b07b6bbbe 100644 --- a/sys/dev/pci/if_bgereg.h +++ b/sys/dev/pci/if_bgereg.h @@ -1,4 +1,4 @@ -/* $OpenBSD: if_bgereg.h,v 1.56 2006/08/28 03:06:47 brad Exp $ */ +/* $OpenBSD: if_bgereg.h,v 1.57 2006/08/29 17:44:16 kettenis Exp $ */ /* * Copyright (c) 2001 Wind River Systems @@ -2348,6 +2348,7 @@ struct bge_softc { struct mii_data bge_mii; struct ifmedia bge_ifmedia; /* media info */ u_int8_t bge_extram; /* has external SSRAM */ + u_int8_t bge_eeprom; u_int8_t bge_tbi; u_int8_t bge_rx_alignment_bug; bus_dma_tag_t bge_dmatag; |