summaryrefslogtreecommitdiff
path: root/sys/dev/pci
diff options
context:
space:
mode:
Diffstat (limited to 'sys/dev/pci')
-rw-r--r--sys/dev/pci/if_em.c31
-rw-r--r--sys/dev/pci/if_em_hw.c68
-rw-r--r--sys/dev/pci/if_em_hw.h3
3 files changed, 58 insertions, 44 deletions
diff --git a/sys/dev/pci/if_em.c b/sys/dev/pci/if_em.c
index 887b291e206..1c3f2bc55bb 100644
--- a/sys/dev/pci/if_em.c
+++ b/sys/dev/pci/if_em.c
@@ -31,7 +31,7 @@ POSSIBILITY OF SUCH DAMAGE.
***************************************************************************/
-/* $OpenBSD: if_em.c,v 1.142 2006/08/09 03:48:25 brad Exp $ */
+/* $OpenBSD: if_em.c,v 1.143 2006/08/09 04:44:06 brad Exp $ */
/* $FreeBSD: if_em.c,v 1.46 2004/09/29 18:28:28 mlaier Exp $ */
#include <dev/pci/if_em.h>
@@ -45,7 +45,7 @@ int em_display_debug_stats = 0;
* Driver version
*********************************************************************/
-char em_driver_version[] = "6.0.5";
+char em_driver_version[] = "6.1.4";
/*********************************************************************
* PCI Device ID Table
@@ -96,6 +96,7 @@ const struct pci_matchid em_devices[] = {
{ PCI_VENDOR_INTEL, PCI_PRODUCT_INTEL_82571EB_AT },
{ PCI_VENDOR_INTEL, PCI_PRODUCT_INTEL_82571EB_COPPER },
{ PCI_VENDOR_INTEL, PCI_PRODUCT_INTEL_82571EB_FIBER },
+ { PCI_VENDOR_INTEL, PCI_PRODUCT_INTEL_82571EB_QUAD_CPR },
{ PCI_VENDOR_INTEL, PCI_PRODUCT_INTEL_82571EB_SERDES },
{ PCI_VENDOR_INTEL, PCI_PRODUCT_INTEL_82572EI_COPPER },
{ PCI_VENDOR_INTEL, PCI_PRODUCT_INTEL_82572EI_FIBER },
@@ -789,6 +790,7 @@ void
em_media_status(struct ifnet *ifp, struct ifmediareq *ifmr)
{
struct em_softc *sc= ifp->if_softc;
+ u_char fiber_type = IFM_1000_SX;
INIT_DEBUGOUT("em_media_status: begin");
@@ -805,8 +807,11 @@ em_media_status(struct ifnet *ifp, struct ifmediareq *ifmr)
ifmr->ifm_status |= IFM_ACTIVE;
- if (sc->hw.media_type == em_media_type_fiber) {
- ifmr->ifm_active |= IFM_1000_SX | IFM_FDX;
+ if (sc->hw.media_type == em_media_type_fiber ||
+ sc->hw.media_type == em_media_type_internal_serdes) {
+ if (sc->hw.mac_type == em_82545)
+ fiber_type = IFM_1000_LX;
+ ifmr->ifm_active |= fiber_type | IFM_FDX;
} else {
switch (sc->link_speed) {
case 10:
@@ -850,8 +855,9 @@ em_media_change(struct ifnet *ifp)
sc->hw.autoneg = DO_AUTO_NEG;
sc->hw.autoneg_advertised = AUTONEG_ADV_DEFAULT;
break;
+ case IFM_1000_LX:
case IFM_1000_SX:
- case IFM_1000_T:
+ case IFM_1000_T:
sc->hw.autoneg = DO_AUTO_NEG;
sc->hw.autoneg_advertised = ADVERTISE_1000_FULL;
break;
@@ -1563,6 +1569,7 @@ void
em_setup_interface(struct em_softc *sc)
{
struct ifnet *ifp;
+ u_char fiber_type = IFM_1000_SX;
INIT_DEBUGOUT("em_setup_interface: begin");
ifp = &sc->interface_data.ac_if;
@@ -1585,10 +1592,13 @@ em_setup_interface(struct em_softc *sc)
*/
ifmedia_init(&sc->media, IFM_IMASK, em_media_change,
em_media_status);
- if (sc->hw.media_type == em_media_type_fiber) {
- ifmedia_add(&sc->media, IFM_ETHER | IFM_1000_SX | IFM_FDX,
+ if (sc->hw.media_type == em_media_type_fiber ||
+ sc->hw.media_type == em_media_type_internal_serdes) {
+ if (sc->hw.mac_type == em_82545)
+ fiber_type = IFM_1000_LX;
+ ifmedia_add(&sc->media, IFM_ETHER | fiber_type | IFM_FDX,
0, NULL);
- ifmedia_add(&sc->media, IFM_ETHER | IFM_1000_SX,
+ ifmedia_add(&sc->media, IFM_ETHER | fiber_type,
0, NULL);
} else {
ifmedia_add(&sc->media, IFM_ETHER | IFM_10_T, 0, NULL);
@@ -1845,7 +1855,8 @@ em_initialize_transmit_unit(struct em_softc *sc)
reg_tipg |= DEFAULT_80003ES2LAN_TIPG_IPGR2 << E1000_TIPG_IPGR2_SHIFT;
break;
default:
- if (sc->hw.media_type == em_media_type_fiber)
+ if (sc->hw.media_type == em_media_type_fiber ||
+ sc->hw.media_type == em_media_type_internal_serdes)
reg_tipg = DEFAULT_82543_TIPG_IPGT_FIBER;
else
reg_tipg = DEFAULT_82543_TIPG_IPGT_COPPER;
@@ -1870,8 +1881,6 @@ em_initialize_transmit_unit(struct em_softc *sc)
} else if (sc->hw.mac_type == em_80003es2lan) {
reg_tarc = E1000_READ_REG(&sc->hw, TARC0);
reg_tarc |= 1;
- if (sc->hw.media_type == em_media_type_internal_serdes)
- reg_tarc |= (1 << 20);
E1000_WRITE_REG(&sc->hw, TARC0, reg_tarc);
reg_tarc = E1000_READ_REG(&sc->hw, TARC1);
reg_tarc |= 1;
diff --git a/sys/dev/pci/if_em_hw.c b/sys/dev/pci/if_em_hw.c
index d0e382b0738..dffc002dfdd 100644
--- a/sys/dev/pci/if_em_hw.c
+++ b/sys/dev/pci/if_em_hw.c
@@ -31,7 +31,7 @@ POSSIBILITY OF SUCH DAMAGE.
*******************************************************************************/
-/* $OpenBSD: if_em_hw.c,v 1.21 2006/07/07 02:56:18 brad Exp $ */
+/* $OpenBSD: if_em_hw.c,v 1.22 2006/08/09 04:44:06 brad Exp $ */
/* if_em_hw.c
* Shared functions for accessing and configuring the MAC
@@ -368,6 +368,7 @@ em_set_mac_type(struct em_hw *hw)
case E1000_DEV_ID_82571EB_COPPER:
case E1000_DEV_ID_82571EB_FIBER:
case E1000_DEV_ID_82571EB_SERDES:
+ case E1000_DEV_ID_82571EB_QUAD_COPPER:
hw->mac_type = em_82571;
break;
case E1000_DEV_ID_82572EI_COPPER:
@@ -731,6 +732,16 @@ em_init_hw(struct em_hw *hw)
DEBUGFUNC("em_init_hw");
+ if (hw->mac_type == em_ich8lan) {
+ reg_data = E1000_READ_REG(hw, TARC0);
+ reg_data |= 0x30000000;
+ E1000_WRITE_REG(hw, TARC0, reg_data);
+
+ reg_data = E1000_READ_REG(hw, STATUS);
+ reg_data &= ~0x80000000;
+ E1000_WRITE_REG(hw, STATUS, reg_data);
+ }
+
/* Initialize Identification LED */
ret_val = em_id_led_init(hw);
if (ret_val) {
@@ -899,7 +910,7 @@ em_init_hw(struct em_hw *hw)
*/
em_clear_hw_cntrs(hw);
- /* ICH8/Nahum No-snoop bits are opposite polarity.
+ /* ICH8 No-snoop bits are opposite polarity.
* Set to snoop by default after reset. */
if (hw->mac_type == em_ich8lan)
em_set_pci_ex_no_snoop(hw, PCI_EX_82566_SNOOP_ALL);
@@ -1335,11 +1346,14 @@ em_copper_link_igp_setup(struct em_hw *hw)
E1000_WRITE_REG(hw, LEDCTL, led_ctrl);
}
- /* disable lplu d3 during driver init */
- ret_val = em_set_d3_lplu_state(hw, FALSE);
- if (ret_val) {
- DEBUGOUT("Error Disabling LPLU D3\n");
- return ret_val;
+ /* The NVM settings will configure LPLU in D3 for IGP2 and IGP3 PHYs */
+ if (hw->phy_type == em_phy_igp) {
+ /* disable lplu d3 during driver init */
+ ret_val = em_set_d3_lplu_state(hw, FALSE);
+ if (ret_val) {
+ DEBUGOUT("Error Disabling LPLU D3\n");
+ return ret_val;
+ }
}
/* disable lplu d0 during driver init */
@@ -1763,19 +1777,6 @@ em_copper_link_autoneg(struct em_hw *hw)
return E1000_SUCCESS;
}
-/********************************************************************
-* Copper link setup for em_phy_ife (Fast Ethernet PHY) series.
-*
-* hw - Struct containing variables accessed by shared code
-*********************************************************************/
-static int32_t
-em_copper_link_ife_setup(struct em_hw *hw)
-{
- if (hw->phy_reset_disable)
- return E1000_SUCCESS;
- return E1000_SUCCESS;
-}
-
/******************************************************************************
* Config the MAC and the PHY after link is up.
* 1) Set up the MAC to the current PHY speed/duplex
@@ -1889,10 +1890,6 @@ em_setup_copper_link(struct em_hw *hw)
ret_val = em_copper_link_ggp_setup(hw);
if (ret_val)
return ret_val;
- } else if (hw->phy_type == em_phy_ife) {
- ret_val = em_copper_link_ife_setup(hw);
- if (ret_val)
- return ret_val;
}
if (hw->autoneg) {
@@ -3747,14 +3744,13 @@ em_phy_hw_reset(struct em_hw *hw)
/* Wait for FW to finish PHY configuration. */
ret_val = em_get_phy_cfg_done(hw);
+ if (ret_val != E1000_SUCCESS)
+ return ret_val;
em_release_software_semaphore(hw);
- if ((hw->mac_type == em_ich8lan) &&
- (hw->phy_type == em_phy_igp_3)) {
- ret_val = em_init_lcd_from_nvm(hw);
- if (ret_val)
- return ret_val;
- }
+ if ((hw->mac_type == em_ich8lan) && (hw->phy_type == em_phy_igp_3))
+ ret_val = em_init_lcd_from_nvm(hw);
+
return ret_val;
}
@@ -3881,8 +3877,8 @@ em_kumeran_lock_loss_workaround(struct em_hw *hw)
if (hw->kmrn_lock_loss_workaround_disabled)
return E1000_SUCCESS;
- /* Make sure link is up before proceeding. If not just return.
- * Attempting this while link is negotiating fouls up link
+ /* Make sure link is up before proceeding. If not just return.
+ * Attempting this while link is negotiating fouled up link
* stability */
ret_val = em_read_phy_reg(hw, PHY_STATUS, &phy_data);
ret_val = em_read_phy_reg(hw, PHY_STATUS, &phy_data);
@@ -9077,6 +9073,14 @@ em_init_lcd_from_nvm_config_region(struct em_hw *hw,
return ret_val;
}
+/******************************************************************************
+ * This function initializes the PHY from the NVM on ICH8 platforms. This
+ * is needed due to an issue where the NVM configuration is not properly
+ * autoloaded after power transitions. Therefore, after each PHY reset, we
+ * will load the configuration data out of the NVM manually.
+ *
+ * hw: Struct containing variables accessed by shared code
+ *****************************************************************************/
int32_t
em_init_lcd_from_nvm(struct em_hw *hw)
{
diff --git a/sys/dev/pci/if_em_hw.h b/sys/dev/pci/if_em_hw.h
index 9843e3fe95b..eb4346675f2 100644
--- a/sys/dev/pci/if_em_hw.h
+++ b/sys/dev/pci/if_em_hw.h
@@ -31,7 +31,7 @@ POSSIBILITY OF SUCH DAMAGE.
*******************************************************************************/
-/* $OpenBSD: if_em_hw.h,v 1.17 2006/07/07 02:56:18 brad Exp $ */
+/* $OpenBSD: if_em_hw.h,v 1.18 2006/08/09 04:44:06 brad Exp $ */
/* $FreeBSD: if_em_hw.h,v 1.15 2005/05/26 23:32:02 tackerman Exp $ */
/* if_em_hw.h
@@ -538,6 +538,7 @@ int32_t em_ife_enable_dynamic_power_down(struct em_hw *hw);
#define E1000_DEV_ID_82571EB_COPPER 0x105E
#define E1000_DEV_ID_82571EB_FIBER 0x105F
#define E1000_DEV_ID_82571EB_SERDES 0x1060
+#define E1000_DEV_ID_82571EB_QUAD_COPPER 0x10A4
#define E1000_DEV_ID_82572EI_COPPER 0x107D
#define E1000_DEV_ID_82572EI_FIBER 0x107E
#define E1000_DEV_ID_82572EI_SERDES 0x107F
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-21 12:53:08 +0000