diff options
Diffstat (limited to 'sys/dev/pci')
| -rw-r--r-- | sys/dev/pci/drm/i915/display/intel_atomic.c | 256 | ||||
| -rw-r--r-- | sys/dev/pci/drm/i915/display/intel_atomic.h | 4 | ||||
| -rw-r--r-- | sys/dev/pci/drm/i915/display/skl_scaler.c | 257 | ||||
| -rw-r--r-- | sys/dev/pci/drm/i915/display/skl_scaler.h | 10 |
4 files changed, 265 insertions, 262 deletions
diff --git a/sys/dev/pci/drm/i915/display/intel_atomic.c b/sys/dev/pci/drm/i915/display/intel_atomic.c index 61dda54d68e..a502af0b6dd 100644 --- a/sys/dev/pci/drm/i915/display/intel_atomic.c +++ b/sys/dev/pci/drm/i915/display/intel_atomic.c @@ -303,262 +303,6 @@ intel_crtc_destroy_state(struct drm_crtc *crtc, kfree(crtc_state); } -static int intel_atomic_setup_scaler(struct intel_crtc_scaler_state *scaler_state, - int num_scalers_need, struct intel_crtc *intel_crtc, - const char *name, int idx, - struct intel_plane_state *plane_state, - int *scaler_id) -{ - struct drm_i915_private *dev_priv = to_i915(intel_crtc->base.dev); - int j; - u32 mode; - - if (*scaler_id < 0) { - /* find a free scaler */ - for (j = 0; j < intel_crtc->num_scalers; j++) { - if (scaler_state->scalers[j].in_use) - continue; - - *scaler_id = j; - scaler_state->scalers[*scaler_id].in_use = 1; - break; - } - } - - if (drm_WARN(&dev_priv->drm, *scaler_id < 0, - "Cannot find scaler for %s:%d\n", name, idx)) - return -EINVAL; - - /* set scaler mode */ - if (plane_state && plane_state->hw.fb && - plane_state->hw.fb->format->is_yuv && - plane_state->hw.fb->format->num_planes > 1) { - struct intel_plane *plane = to_intel_plane(plane_state->uapi.plane); - if (DISPLAY_VER(dev_priv) == 9) { - mode = SKL_PS_SCALER_MODE_NV12; - } else if (icl_is_hdr_plane(dev_priv, plane->id)) { - /* - * On gen11+'s HDR planes we only use the scaler for - * scaling. They have a dedicated chroma upsampler, so - * we don't need the scaler to upsample the UV plane. - */ - mode = PS_SCALER_MODE_NORMAL; - } else { - struct intel_plane *linked = - plane_state->planar_linked_plane; - - mode = PS_SCALER_MODE_PLANAR; - - if (linked) - mode |= PS_PLANE_Y_SEL(linked->id); - } - } else if (DISPLAY_VER(dev_priv) >= 10) { - mode = PS_SCALER_MODE_NORMAL; - } else if (num_scalers_need == 1 && intel_crtc->num_scalers > 1) { - /* - * when only 1 scaler is in use on a pipe with 2 scalers - * scaler 0 operates in high quality (HQ) mode. - * In this case use scaler 0 to take advantage of HQ mode - */ - scaler_state->scalers[*scaler_id].in_use = 0; - *scaler_id = 0; - scaler_state->scalers[0].in_use = 1; - mode = SKL_PS_SCALER_MODE_HQ; - } else { - mode = SKL_PS_SCALER_MODE_DYN; - } - - /* - * FIXME: we should also check the scaler factors for pfit, so - * this shouldn't be tied directly to planes. - */ - if (plane_state && plane_state->hw.fb) { - const struct drm_framebuffer *fb = plane_state->hw.fb; - const struct drm_rect *src = &plane_state->uapi.src; - const struct drm_rect *dst = &plane_state->uapi.dst; - int hscale, vscale, max_vscale, max_hscale; - - /* - * FIXME: When two scalers are needed, but only one of - * them needs to downscale, we should make sure that - * the one that needs downscaling support is assigned - * as the first scaler, so we don't reject downscaling - * unnecessarily. - */ - - if (DISPLAY_VER(dev_priv) >= 14) { - /* - * On versions 14 and up, only the first - * scaler supports a vertical scaling factor - * of more than 1.0, while a horizontal - * scaling factor of 3.0 is supported. - */ - max_hscale = 0x30000 - 1; - if (*scaler_id == 0) - max_vscale = 0x30000 - 1; - else - max_vscale = 0x10000; - - } else if (DISPLAY_VER(dev_priv) >= 10 || - !intel_format_info_is_yuv_semiplanar(fb->format, fb->modifier)) { - max_hscale = 0x30000 - 1; - max_vscale = 0x30000 - 1; - } else { - max_hscale = 0x20000 - 1; - max_vscale = 0x20000 - 1; - } - - /* - * FIXME: We should change the if-else block above to - * support HQ vs dynamic scaler properly. - */ - - /* Check if required scaling is within limits */ - hscale = drm_rect_calc_hscale(src, dst, 1, max_hscale); - vscale = drm_rect_calc_vscale(src, dst, 1, max_vscale); - - if (hscale < 0 || vscale < 0) { - drm_dbg_kms(&dev_priv->drm, - "Scaler %d doesn't support required plane scaling\n", - *scaler_id); - drm_rect_debug_print("src: ", src, true); - drm_rect_debug_print("dst: ", dst, false); - - return -EINVAL; - } - } - - drm_dbg_kms(&dev_priv->drm, "Attached scaler id %u.%u to %s:%d\n", - intel_crtc->pipe, *scaler_id, name, idx); - scaler_state->scalers[*scaler_id].mode = mode; - - return 0; -} - -/** - * intel_atomic_setup_scalers() - setup scalers for crtc per staged requests - * @dev_priv: i915 device - * @intel_crtc: intel crtc - * @crtc_state: incoming crtc_state to validate and setup scalers - * - * This function sets up scalers based on staged scaling requests for - * a @crtc and its planes. It is called from crtc level check path. If request - * is a supportable request, it attaches scalers to requested planes and crtc. - * - * This function takes into account the current scaler(s) in use by any planes - * not being part of this atomic state - * - * Returns: - * 0 - scalers were setup succesfully - * error code - otherwise - */ -int intel_atomic_setup_scalers(struct drm_i915_private *dev_priv, - struct intel_crtc *intel_crtc, - struct intel_crtc_state *crtc_state) -{ - struct drm_plane *plane = NULL; - struct intel_plane *intel_plane; - struct intel_plane_state *plane_state = NULL; - struct intel_crtc_scaler_state *scaler_state = - &crtc_state->scaler_state; - struct drm_atomic_state *drm_state = crtc_state->uapi.state; - struct intel_atomic_state *intel_state = to_intel_atomic_state(drm_state); - int num_scalers_need; - int i; - - num_scalers_need = hweight32(scaler_state->scaler_users); - - /* - * High level flow: - * - staged scaler requests are already in scaler_state->scaler_users - * - check whether staged scaling requests can be supported - * - add planes using scalers that aren't in current transaction - * - assign scalers to requested users - * - as part of plane commit, scalers will be committed - * (i.e., either attached or detached) to respective planes in hw - * - as part of crtc_commit, scaler will be either attached or detached - * to crtc in hw - */ - - /* fail if required scalers > available scalers */ - if (num_scalers_need > intel_crtc->num_scalers){ - drm_dbg_kms(&dev_priv->drm, - "Too many scaling requests %d > %d\n", - num_scalers_need, intel_crtc->num_scalers); - return -EINVAL; - } - - /* walkthrough scaler_users bits and start assigning scalers */ - for (i = 0; i < sizeof(scaler_state->scaler_users) * 8; i++) { - int *scaler_id; - const char *name; - int idx, ret; - - /* skip if scaler not required */ - if (!(scaler_state->scaler_users & (1 << i))) - continue; - - if (i == SKL_CRTC_INDEX) { - name = "CRTC"; - idx = intel_crtc->base.base.id; - - /* panel fitter case: assign as a crtc scaler */ - scaler_id = &scaler_state->scaler_id; - } else { - name = "PLANE"; - - /* plane scaler case: assign as a plane scaler */ - /* find the plane that set the bit as scaler_user */ - plane = drm_state->planes[i].ptr; - - /* - * to enable/disable hq mode, add planes that are using scaler - * into this transaction - */ - if (!plane) { - struct drm_plane_state *state; - - /* - * GLK+ scalers don't have a HQ mode so it - * isn't necessary to change between HQ and dyn mode - * on those platforms. - */ - if (DISPLAY_VER(dev_priv) >= 10) - continue; - - plane = drm_plane_from_index(&dev_priv->drm, i); - state = drm_atomic_get_plane_state(drm_state, plane); - if (IS_ERR(state)) { - drm_dbg_kms(&dev_priv->drm, - "Failed to add [PLANE:%d] to drm_state\n", - plane->base.id); - return PTR_ERR(state); - } - } - - intel_plane = to_intel_plane(plane); - idx = plane->base.id; - - /* plane on different crtc cannot be a scaler user of this crtc */ - if (drm_WARN_ON(&dev_priv->drm, - intel_plane->pipe != intel_crtc->pipe)) - continue; - - plane_state = intel_atomic_get_new_plane_state(intel_state, - intel_plane); - scaler_id = &plane_state->scaler_id; - } - - ret = intel_atomic_setup_scaler(scaler_state, num_scalers_need, - intel_crtc, name, idx, - plane_state, scaler_id); - if (ret < 0) - return ret; - } - - return 0; -} - struct drm_atomic_state * intel_atomic_state_alloc(struct drm_device *dev) { diff --git a/sys/dev/pci/drm/i915/display/intel_atomic.h b/sys/dev/pci/drm/i915/display/intel_atomic.h index 726f469478e..d1cd8dc0033 100644 --- a/sys/dev/pci/drm/i915/display/intel_atomic.h +++ b/sys/dev/pci/drm/i915/display/intel_atomic.h @@ -54,8 +54,4 @@ struct intel_crtc_state * intel_atomic_get_crtc_state(struct drm_atomic_state *state, struct intel_crtc *crtc); -int intel_atomic_setup_scalers(struct drm_i915_private *dev_priv, - struct intel_crtc *intel_crtc, - struct intel_crtc_state *crtc_state); - #endif /* __INTEL_ATOMIC_H__ */ diff --git a/sys/dev/pci/drm/i915/display/skl_scaler.c b/sys/dev/pci/drm/i915/display/skl_scaler.c index 90f42f63128..83a61efa843 100644 --- a/sys/dev/pci/drm/i915/display/skl_scaler.c +++ b/sys/dev/pci/drm/i915/display/skl_scaler.c @@ -337,6 +337,263 @@ int skl_update_scaler_plane(struct intel_crtc_state *crtc_state, return 0; } +static int intel_atomic_setup_scaler(struct intel_crtc_scaler_state *scaler_state, + int num_scalers_need, struct intel_crtc *intel_crtc, + const char *name, int idx, + struct intel_plane_state *plane_state, + int *scaler_id) +{ + struct drm_i915_private *dev_priv = to_i915(intel_crtc->base.dev); + int j; + u32 mode; + + if (*scaler_id < 0) { + /* find a free scaler */ + for (j = 0; j < intel_crtc->num_scalers; j++) { + if (scaler_state->scalers[j].in_use) + continue; + + *scaler_id = j; + scaler_state->scalers[*scaler_id].in_use = 1; + break; + } + } + + if (drm_WARN(&dev_priv->drm, *scaler_id < 0, + "Cannot find scaler for %s:%d\n", name, idx)) + return -EINVAL; + + /* set scaler mode */ + if (plane_state && plane_state->hw.fb && + plane_state->hw.fb->format->is_yuv && + plane_state->hw.fb->format->num_planes > 1) { + struct intel_plane *plane = to_intel_plane(plane_state->uapi.plane); + + if (DISPLAY_VER(dev_priv) == 9) { + mode = SKL_PS_SCALER_MODE_NV12; + } else if (icl_is_hdr_plane(dev_priv, plane->id)) { + /* + * On gen11+'s HDR planes we only use the scaler for + * scaling. They have a dedicated chroma upsampler, so + * we don't need the scaler to upsample the UV plane. + */ + mode = PS_SCALER_MODE_NORMAL; + } else { + struct intel_plane *linked = + plane_state->planar_linked_plane; + + mode = PS_SCALER_MODE_PLANAR; + + if (linked) + mode |= PS_PLANE_Y_SEL(linked->id); + } + } else if (DISPLAY_VER(dev_priv) >= 10) { + mode = PS_SCALER_MODE_NORMAL; + } else if (num_scalers_need == 1 && intel_crtc->num_scalers > 1) { + /* + * when only 1 scaler is in use on a pipe with 2 scalers + * scaler 0 operates in high quality (HQ) mode. + * In this case use scaler 0 to take advantage of HQ mode + */ + scaler_state->scalers[*scaler_id].in_use = 0; + *scaler_id = 0; + scaler_state->scalers[0].in_use = 1; + mode = SKL_PS_SCALER_MODE_HQ; + } else { + mode = SKL_PS_SCALER_MODE_DYN; + } + + /* + * FIXME: we should also check the scaler factors for pfit, so + * this shouldn't be tied directly to planes. + */ + if (plane_state && plane_state->hw.fb) { + const struct drm_framebuffer *fb = plane_state->hw.fb; + const struct drm_rect *src = &plane_state->uapi.src; + const struct drm_rect *dst = &plane_state->uapi.dst; + int hscale, vscale, max_vscale, max_hscale; + + /* + * FIXME: When two scalers are needed, but only one of + * them needs to downscale, we should make sure that + * the one that needs downscaling support is assigned + * as the first scaler, so we don't reject downscaling + * unnecessarily. + */ + + if (DISPLAY_VER(dev_priv) >= 14) { + /* + * On versions 14 and up, only the first + * scaler supports a vertical scaling factor + * of more than 1.0, while a horizontal + * scaling factor of 3.0 is supported. + */ + max_hscale = 0x30000 - 1; + if (*scaler_id == 0) + max_vscale = 0x30000 - 1; + else + max_vscale = 0x10000; + + } else if (DISPLAY_VER(dev_priv) >= 10 || + !intel_format_info_is_yuv_semiplanar(fb->format, fb->modifier)) { + max_hscale = 0x30000 - 1; + max_vscale = 0x30000 - 1; + } else { + max_hscale = 0x20000 - 1; + max_vscale = 0x20000 - 1; + } + + /* + * FIXME: We should change the if-else block above to + * support HQ vs dynamic scaler properly. + */ + + /* Check if required scaling is within limits */ + hscale = drm_rect_calc_hscale(src, dst, 1, max_hscale); + vscale = drm_rect_calc_vscale(src, dst, 1, max_vscale); + + if (hscale < 0 || vscale < 0) { + drm_dbg_kms(&dev_priv->drm, + "Scaler %d doesn't support required plane scaling\n", + *scaler_id); + drm_rect_debug_print("src: ", src, true); + drm_rect_debug_print("dst: ", dst, false); + + return -EINVAL; + } + } + + drm_dbg_kms(&dev_priv->drm, "Attached scaler id %u.%u to %s:%d\n", + intel_crtc->pipe, *scaler_id, name, idx); + scaler_state->scalers[*scaler_id].mode = mode; + + return 0; +} + +/** + * intel_atomic_setup_scalers() - setup scalers for crtc per staged requests + * @dev_priv: i915 device + * @intel_crtc: intel crtc + * @crtc_state: incoming crtc_state to validate and setup scalers + * + * This function sets up scalers based on staged scaling requests for + * a @crtc and its planes. It is called from crtc level check path. If request + * is a supportable request, it attaches scalers to requested planes and crtc. + * + * This function takes into account the current scaler(s) in use by any planes + * not being part of this atomic state + * + * Returns: + * 0 - scalers were setup successfully + * error code - otherwise + */ +int intel_atomic_setup_scalers(struct drm_i915_private *dev_priv, + struct intel_crtc *intel_crtc, + struct intel_crtc_state *crtc_state) +{ + struct drm_plane *plane = NULL; + struct intel_plane *intel_plane; + struct intel_plane_state *plane_state = NULL; + struct intel_crtc_scaler_state *scaler_state = + &crtc_state->scaler_state; + struct drm_atomic_state *drm_state = crtc_state->uapi.state; + struct intel_atomic_state *intel_state = to_intel_atomic_state(drm_state); + int num_scalers_need; + int i; + + num_scalers_need = hweight32(scaler_state->scaler_users); + + /* + * High level flow: + * - staged scaler requests are already in scaler_state->scaler_users + * - check whether staged scaling requests can be supported + * - add planes using scalers that aren't in current transaction + * - assign scalers to requested users + * - as part of plane commit, scalers will be committed + * (i.e., either attached or detached) to respective planes in hw + * - as part of crtc_commit, scaler will be either attached or detached + * to crtc in hw + */ + + /* fail if required scalers > available scalers */ + if (num_scalers_need > intel_crtc->num_scalers) { + drm_dbg_kms(&dev_priv->drm, + "Too many scaling requests %d > %d\n", + num_scalers_need, intel_crtc->num_scalers); + return -EINVAL; + } + + /* walkthrough scaler_users bits and start assigning scalers */ + for (i = 0; i < sizeof(scaler_state->scaler_users) * 8; i++) { + int *scaler_id; + const char *name; + int idx, ret; + + /* skip if scaler not required */ + if (!(scaler_state->scaler_users & (1 << i))) + continue; + + if (i == SKL_CRTC_INDEX) { + name = "CRTC"; + idx = intel_crtc->base.base.id; + + /* panel fitter case: assign as a crtc scaler */ + scaler_id = &scaler_state->scaler_id; + } else { + name = "PLANE"; + + /* plane scaler case: assign as a plane scaler */ + /* find the plane that set the bit as scaler_user */ + plane = drm_state->planes[i].ptr; + + /* + * to enable/disable hq mode, add planes that are using scaler + * into this transaction + */ + if (!plane) { + struct drm_plane_state *state; + + /* + * GLK+ scalers don't have a HQ mode so it + * isn't necessary to change between HQ and dyn mode + * on those platforms. + */ + if (DISPLAY_VER(dev_priv) >= 10) + continue; + + plane = drm_plane_from_index(&dev_priv->drm, i); + state = drm_atomic_get_plane_state(drm_state, plane); + if (IS_ERR(state)) { + drm_dbg_kms(&dev_priv->drm, + "Failed to add [PLANE:%d] to drm_state\n", + plane->base.id); + return PTR_ERR(state); + } + } + + intel_plane = to_intel_plane(plane); + idx = plane->base.id; + + /* plane on different crtc cannot be a scaler user of this crtc */ + if (drm_WARN_ON(&dev_priv->drm, + intel_plane->pipe != intel_crtc->pipe)) + continue; + + plane_state = intel_atomic_get_new_plane_state(intel_state, + intel_plane); + scaler_id = &plane_state->scaler_id; + } + + ret = intel_atomic_setup_scaler(scaler_state, num_scalers_need, + intel_crtc, name, idx, + plane_state, scaler_id); + if (ret < 0) + return ret; + } + + return 0; +} + static int glk_coef_tap(int i) { return i % 7; diff --git a/sys/dev/pci/drm/i915/display/skl_scaler.h b/sys/dev/pci/drm/i915/display/skl_scaler.h index 0097d5d08e1..f040f6ac061 100644 --- a/sys/dev/pci/drm/i915/display/skl_scaler.h +++ b/sys/dev/pci/drm/i915/display/skl_scaler.h @@ -8,17 +8,22 @@ #include <linux/types.h> enum drm_scaling_filter; +enum pipe; struct drm_i915_private; +struct intel_crtc; struct intel_crtc_state; -struct intel_plane_state; struct intel_plane; -enum pipe; +struct intel_plane_state; int skl_update_scaler_crtc(struct intel_crtc_state *crtc_state); int skl_update_scaler_plane(struct intel_crtc_state *crtc_state, struct intel_plane_state *plane_state); +int intel_atomic_setup_scalers(struct drm_i915_private *dev_priv, + struct intel_crtc *intel_crtc, + struct intel_crtc_state *crtc_state); + void skl_pfit_enable(const struct intel_crtc_state *crtc_state); void skl_program_plane_scaler(struct intel_plane *plane, @@ -26,4 +31,5 @@ void skl_program_plane_scaler(struct intel_plane *plane, const struct intel_plane_state *plane_state); void skl_detach_scalers(const struct intel_crtc_state *crtc_state); void skl_scaler_disable(const struct intel_crtc_state *old_crtc_state); + #endif |