diff options
Diffstat (limited to 'sys/dev')
| -rw-r--r-- | sys/dev/pci/ahc_pci.c | 34 |
1 files changed, 29 insertions, 5 deletions
diff --git a/sys/dev/pci/ahc_pci.c b/sys/dev/pci/ahc_pci.c index 72f5cb6cc35..7f7feadcbd2 100644 --- a/sys/dev/pci/ahc_pci.c +++ b/sys/dev/pci/ahc_pci.c @@ -1,4 +1,4 @@ -/* $OpenBSD: ahc_pci.c,v 1.33 2002/06/29 23:53:33 miod Exp $ */ +/* $OpenBSD: ahc_pci.c,v 1.34 2002/06/30 19:19:49 smurph Exp $ */ /* $NetBSD: ahc_pci.c,v 1.9 1996/10/21 22:56:24 thorpej Exp $ */ /* @@ -502,6 +502,11 @@ ahc_do_pci_config(ahc) int opri; uint8_t sblkctl; + + ahc->chip |= AHC_PCI; +#if 0 + ahc_power_state_change(ahc, AHC_POWER_STATE_D0); +#endif error = ahc_pci_map_registers(ahc); if (error != 0) return (error); @@ -509,10 +514,14 @@ ahc_do_pci_config(ahc) * Registers are mapped. Now it is safe to use * the ahc_inb and ahc_outb macros. */ - ahc->chip |= AHC_PCI; /* we are a PCI controller */ -#if 0 - ahc_power_state_change(ahc, AHC_POWER_STATE_D0); -#endif + + /* + * Before we continue probing the card, ensure that + * its interrupts are *disabled*. We don't want + * a misstep to hang the machine in an interrupt + * storm. + */ + ahc_intr_enable(ahc, FALSE); /* * If we need to support high memory, enable dual @@ -1030,6 +1039,12 @@ check_extport(ahc, sxfrctl1) } have_seeprom = verify_cksum(&sc); } + /* + * Clear any SCB parity errors in case this data and + * its associated parity was not initialized by the BIOS + */ + ahc_outb(ahc, CLRINT, CLRPARERR); + ahc_outb(ahc, CLRINT, CLRBRKADRINT); } if (!have_seeprom) { @@ -1305,6 +1320,15 @@ configure_termination(struct ahc_softc *ahc, "Only two connectors on the " "adapter may be used at a " "time!\n", ahc_name(ahc)); + + /* + * Pretend there are no cables in the hope + * that having all of the termination on + * gives us a more stable bus. + */ + internal50_present = 0; + internal68_present = 0; + externalcable_present = 0; } if ((ahc->features & AHC_WIDE) != 0 |