diff options
Diffstat (limited to 'sys/dev')
| -rw-r--r-- | sys/dev/pci/files.pci | 4 | ||||
| -rw-r--r-- | sys/dev/pci/if_sis.c | 1376 | ||||
| -rw-r--r-- | sys/dev/pci/if_sisreg.h | 404 |
3 files changed, 1782 insertions, 2 deletions
diff --git a/sys/dev/pci/files.pci b/sys/dev/pci/files.pci index db0807dcf9e..7f7930d2200 100644 --- a/sys/dev/pci/files.pci +++ b/sys/dev/pci/files.pci @@ -1,4 +1,4 @@ -# $OpenBSD: files.pci,v 1.56 1999/11/30 07:55:56 cmetz Exp $ +# $OpenBSD: files.pci,v 1.57 1999/12/04 20:27:37 aaron Exp $ # $NetBSD: files.pci,v 1.20 1996/09/24 17:47:15 christos Exp $ # # Config file and device description for machine-independent PCI code. @@ -203,7 +203,7 @@ device sf: ether, ifnet, mii, ifmedia attach sf at pci file dev/pci/if_sf.c sf -# SiS 900 ethernet +# SiS 900/7016 ethernet device sis: ether, ifnet, mii, ifmedia attach sis at pci file dev/pci/if_sis.c sis diff --git a/sys/dev/pci/if_sis.c b/sys/dev/pci/if_sis.c new file mode 100644 index 00000000000..eec491c6e50 --- /dev/null +++ b/sys/dev/pci/if_sis.c @@ -0,0 +1,1376 @@ +/* $OpenBSD: if_sis.c,v 1.1 1999/12/04 20:27:36 aaron Exp $ */ +/* + * Copyright (c) 1997, 1998, 1999 + * Bill Paul <wpaul@ctr.columbia.edu>. All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * 3. All advertising materials mentioning features or use of this software + * must display the following acknowledgement: + * This product includes software developed by Bill Paul. + * 4. Neither the name of the author nor the names of any co-contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY Bill Paul AND CONTRIBUTORS ``AS IS'' AND + * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + * ARE DISCLAIMED. IN NO EVENT SHALL Bill Paul OR THE VOICES IN HIS HEAD + * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR + * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF + * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS + * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN + * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) + * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF + * THE POSSIBILITY OF SUCH DAMAGE. + * + * $FreeBSD: src/sys/pci/if_sis.c,v 1.13 1999/09/25 17:29:01 wpaul Exp $ + */ + +/* + * SiS 900/SiS 7016 fast ethernet PCI NIC driver. Datasheets are + * available from http://www.sis.com.tw. + * + * Written by Bill Paul <wpaul@ee.columbia.edu> + * Electrical Engineering Department + * Columbia University, New York City + */ + +/* + * The SiS 900 is a fairly simple chip. It uses bus master DMA with + * simple TX and RX descriptors of 3 longwords in size. The receiver + * has a single perfect filter entry for the station address and a + * 128-bit multicast hash table. The SiS 900 has a built-in MII-based + * transceiver while the 7016 requires an external transceiver chip. + * Both chips offer the standard bit-bang MII interface as well as + * an enchanced PHY interface which simplifies accessing MII registers. + * + * The only downside to this chipset is that RX descriptors must be + * longword aligned. + */ + +#include "bpfilter.h" + +#include <sys/param.h> +#include <sys/systm.h> +#include <sys/mbuf.h> +#include <sys/protosw.h> +#include <sys/socket.h> +#include <sys/ioctl.h> +#include <sys/errno.h> +#include <sys/malloc.h> +#include <sys/kernel.h> + +#include <net/if.h> +#include <net/if_dl.h> +#include <net/if_types.h> + +#ifdef INET +#include <netinet/in.h> +#include <netinet/in_systm.h> +#include <netinet/in_var.h> +#include <netinet/ip.h> +#include <netinet/if_ether.h> +#endif + +#include <net/if_media.h> + +#if NBPFILTER > 0 +#include <net/bpf.h> +#endif + +#include <vm/vm.h> /* for vtophys */ +#include <vm/pmap.h> /* for vtophys */ + +#include <sys/device.h> + +#include <dev/mii/mii.h> +#include <dev/mii/miivar.h> + +#include <dev/pci/pcireg.h> +#include <dev/pci/pcivar.h> +#include <dev/pci/pcidevs.h> + +#define SIS_USEIOSPACE + +#include <dev/pci/if_sisreg.h> + +int sis_probe __P((struct device *, void *, void *)); +void sis_attach __P((struct device *, struct device *, void *)); +int sis_intr __P((void *)); +void sis_shutdown __P((void *)); +int sis_newbuf __P((struct sis_softc *, struct sis_desc *, + struct mbuf *)); +int sis_encap __P((struct sis_softc *, struct mbuf *, u_int32_t *)); +void sis_rxeof __P((struct sis_softc *)); +void sis_rxeoc __P((struct sis_softc *)); +void sis_txeof __P((struct sis_softc *)); +void sis_tick __P((void *)); +void sis_start __P((struct ifnet *)); +int sis_ioctl __P((struct ifnet *, u_long, caddr_t)); +void sis_init __P((void *)); +void sis_stop __P((struct sis_softc *)); +void sis_watchdog __P((struct ifnet *)); +int sis_ifmedia_upd __P((struct ifnet *)); +void sis_ifmedia_sts __P((struct ifnet *, struct ifmediareq *)); + +void sis_delay __P((struct sis_softc *)); +void sis_eeprom_idle __P((struct sis_softc *)); +void sis_eeprom_putbyte __P((struct sis_softc *, int)); +void sis_eeprom_getword __P((struct sis_softc *, int, u_int16_t *)); +void sis_read_eeprom __P((struct sis_softc *, caddr_t, int, int, int)); + +int sis_miibus_readreg __P((struct device *, int, int)); +void sis_miibus_writereg __P((struct device *, int, int, int)); +void sis_miibus_statchg __P((struct device *)); + +void sis_setmulti __P((struct sis_softc *)); +u_int32_t sis_calchash __P((caddr_t)); +void sis_reset __P((struct sis_softc *)); +int sis_list_rx_init __P((struct sis_softc *)); +int sis_list_tx_init __P((struct sis_softc *)); + +#ifdef SIS_USEIOSPACE +#define SIS_RES SYS_RES_IOPORT +#define SIS_RID SIS_PCI_LOIO +#else +#define SIS_RES SYS_RES_MEMORY +#define SIS_RID SIS_PCI_LOMEM +#endif + +#define SIS_SETBIT(sc, reg, x) \ + CSR_WRITE_4(sc, reg, \ + CSR_READ_4(sc, reg) | (x)) + +#define SIS_CLRBIT(sc, reg, x) \ + CSR_WRITE_4(sc, reg, \ + CSR_READ_4(sc, reg) & ~(x)) + +#define SIO_SET(x) \ + CSR_WRITE_4(sc, SIS_EECTL, CSR_READ_4(sc, SIS_EECTL) | x) + +#define SIO_CLR(x) \ + CSR_WRITE_4(sc, SIS_EECTL, CSR_READ_4(sc, SIS_EECTL) & ~x) + +void sis_delay(sc) + struct sis_softc *sc; +{ + int idx; + + for (idx = (300 / 33) + 1; idx > 0; idx--) + CSR_READ_4(sc, SIS_CSR); + + return; +} + +void sis_eeprom_idle(sc) + struct sis_softc *sc; +{ + register int i; + + SIO_SET(SIS_EECTL_CSEL); + sis_delay(sc); + SIO_SET(SIS_EECTL_CLK); + sis_delay(sc); + + for (i = 0; i < 25; i++) { + SIO_CLR(SIS_EECTL_CLK); + sis_delay(sc); + SIO_SET(SIS_EECTL_CLK); + sis_delay(sc); + } + + SIO_CLR(SIS_EECTL_CLK); + sis_delay(sc); + SIO_CLR(SIS_EECTL_CSEL); + sis_delay(sc); + CSR_WRITE_4(sc, SIS_EECTL, 0x00000000); + + return; +} + +/* + * Send a read command and address to the EEPROM, check for ACK. + */ +void sis_eeprom_putbyte(sc, addr) + struct sis_softc *sc; + int addr; +{ + register int d, i; + + d = addr | SIS_EECMD_READ; + + /* + * Feed in each bit and stobe the clock. + */ + for (i = 0x400; i; i >>= 1) { + if (d & i) { + SIO_SET(SIS_EECTL_DIN); + } else { + SIO_CLR(SIS_EECTL_DIN); + } + sis_delay(sc); + SIO_SET(SIS_EECTL_CLK); + sis_delay(sc); + SIO_CLR(SIS_EECTL_CLK); + sis_delay(sc); + } + + return; +} + +/* + * Read a word of data stored in the EEPROM at address 'addr.' + */ +void sis_eeprom_getword(sc, addr, dest) + struct sis_softc *sc; + int addr; + u_int16_t *dest; +{ + register int i; + u_int16_t word = 0; + + /* Force EEPROM to idle state. */ + sis_eeprom_idle(sc); + + /* Enter EEPROM access mode. */ + sis_delay(sc); + SIO_SET(SIS_EECTL_CSEL); + sis_delay(sc); + SIO_SET(SIS_EECTL_CLK); + sis_delay(sc); + + /* + * Send address of word we want to read. + */ + sis_eeprom_putbyte(sc, addr); + + /* + * Start reading bits from EEPROM. + */ + for (i = 0x8000; i; i >>= 1) { + SIO_SET(SIS_EECTL_CLK); + sis_delay(sc); + if (CSR_READ_4(sc, SIS_EECTL) & SIS_EECTL_DOUT) + word |= i; + sis_delay(sc); + SIO_CLR(SIS_EECTL_CLK); + sis_delay(sc); + } + + /* Turn off EEPROM access mode. */ + sis_eeprom_idle(sc); + + *dest = word; + + return; +} + +/* + * Read a sequence of words from the EEPROM. + */ +void sis_read_eeprom(sc, dest, off, cnt, swap) + struct sis_softc *sc; + caddr_t dest; + int off; + int cnt; + int swap; +{ + int i; + u_int16_t word = 0, *ptr; + + for (i = 0; i < cnt; i++) { + sis_eeprom_getword(sc, off + i, &word); + ptr = (u_int16_t *)(dest + (i * 2)); + if (swap) + *ptr = ntohs(word); + else + *ptr = word; + } + + return; +} + +int sis_miibus_readreg(self, phy, reg) + struct device *self; + int phy, reg; +{ + struct sis_softc *sc = (struct sis_softc *)self; + int i, val; + + if (sc->sis_type == SIS_TYPE_900 && phy != 0) + return(0); + + CSR_WRITE_4(sc, SIS_PHYCTL, (phy << 11) | (reg << 6) | SIS_PHYOP_READ); + SIS_SETBIT(sc, SIS_PHYCTL, SIS_PHYCTL_ACCESS); + + for (i = 0; i < SIS_TIMEOUT; i++) { + if (!(CSR_READ_4(sc, SIS_PHYCTL) & SIS_PHYCTL_ACCESS)) + break; + } + + if (i == SIS_TIMEOUT) { + printf("sis%d: PHY failed to come ready\n", sc->sis_unit); + return(0); + } + + val = (CSR_READ_4(sc, SIS_PHYCTL) >> 16) & 0xFFFF; + + if (val == 0xFFFF) + return(0); + + return(val); +} + +void sis_miibus_writereg(self, phy, reg, data) + struct device *self; + int phy, reg, data; +{ + struct sis_softc *sc = (struct sis_softc *)self; + int i; + + if (sc->sis_type == SIS_TYPE_900 && phy != 0) + return; + + CSR_WRITE_4(sc, SIS_PHYCTL, (data << 16) | (phy << 11) | + (reg << 6) | SIS_PHYOP_WRITE); + SIS_SETBIT(sc, SIS_PHYCTL, SIS_PHYCTL_ACCESS); + + for (i = 0; i < SIS_TIMEOUT; i++) { + if (!(CSR_READ_4(sc, SIS_PHYCTL) & SIS_PHYCTL_ACCESS)) + break; + } + + if (i == SIS_TIMEOUT) + printf("sis%d: PHY failed to come ready\n", sc->sis_unit); + + return; +} + +void sis_miibus_statchg(self) + struct device *self; +{ + struct sis_softc *sc = (struct sis_softc *)self; + struct mii_data *mii; + + mii = &sc->sc_mii; + + if ((mii->mii_media_active & IFM_GMASK) == IFM_FDX) { + SIS_SETBIT(sc, SIS_TX_CFG, + (SIS_TXCFG_IGN_HBEAT|SIS_TXCFG_IGN_CARR)); + SIS_SETBIT(sc, SIS_RX_CFG, SIS_RXCFG_RX_TXPKTS); + } else { + SIS_CLRBIT(sc, SIS_TX_CFG, + (SIS_TXCFG_IGN_HBEAT|SIS_TXCFG_IGN_CARR)); + SIS_CLRBIT(sc, SIS_RX_CFG, SIS_RXCFG_RX_TXPKTS); + } + + return; +} + +u_int32_t sis_calchash(addr) + caddr_t addr; +{ + u_int32_t crc, carry; + int i, j; + u_int8_t c; + + /* Compute CRC for the address value. */ + crc = 0xFFFFFFFF; /* initial value */ + + for (i = 0; i < 6; i++) { + c = *(addr + i); + for (j = 0; j < 8; j++) { + carry = ((crc & 0x80000000) ? 1 : 0) ^ (c & 0x01); + crc <<= 1; + c >>= 1; + if (carry) + crc = (crc ^ 0x04c11db6) | carry; + } + } + + /* return the filter bit position */ + return((crc >> 25) & 0x0000007F); +} + +void sis_setmulti(sc) + struct sis_softc *sc; +{ + struct ifnet *ifp; + struct arpcom *ac = &sc->arpcom; + struct ether_multi *enm; + struct ether_multistep step; + u_int32_t h = 0, i, filtsave; + + ifp = &sc->arpcom.ac_if; + + if (ifp->if_flags & IFF_ALLMULTI || ifp->if_flags & IFF_PROMISC) { + SIS_SETBIT(sc, SIS_RXFILT_CTL, SIS_RXFILTCTL_ALLMULTI); + return; + } + + SIS_CLRBIT(sc, SIS_RXFILT_CTL, SIS_RXFILTCTL_ALLMULTI); + + filtsave = CSR_READ_4(sc, SIS_RXFILT_CTL); + + /* first, zot all the existing hash bits */ + for (i = 0; i < 8; i++) { + CSR_WRITE_4(sc, SIS_RXFILT_CTL, (4 + ((i * 16) >> 4)) << 16); + CSR_WRITE_4(sc, SIS_RXFILT_DATA, 0); + } + + /* now program new ones */ + ETHER_FIRST_MULTI(step, ac, enm); + while (enm != NULL) { + h = sis_calchash(enm->enm_addrlo); + CSR_WRITE_4(sc, SIS_RXFILT_CTL, (4 + (h >> 4)) << 16); + SIS_SETBIT(sc, SIS_RXFILT_DATA, (1 << (h & 0xF))); + ETHER_NEXT_MULTI(step, enm); + } + + CSR_WRITE_4(sc, SIS_RXFILT_CTL, filtsave); + + return; +} + +void sis_reset(sc) + struct sis_softc *sc; +{ + register int i; + + SIS_SETBIT(sc, SIS_CSR, SIS_CSR_RESET); + + for (i = 0; i < SIS_TIMEOUT; i++) { + if (!(CSR_READ_4(sc, SIS_CSR) & SIS_CSR_RESET)) + break; + } + + if (i == SIS_TIMEOUT) + printf("sis%d: reset never completed\n", sc->sis_unit); + + /* Wait a little while for the chip to get its brains in order. */ + DELAY(1000); + return; +} + +/* + * Probe for an SiS chip. Check the PCI vendor and device + * IDs against our list and return a device name if we find a match. + */ +int sis_probe(parent, match, aux) + struct device *parent; + void *match; + void *aux; +{ + struct pci_attach_args *pa = (struct pci_attach_args *)aux; + + if (PCI_VENDOR(pa->pa_id) != PCI_VENDOR_SIS) + return(0); + + switch (PCI_PRODUCT(pa->pa_id)) { + case PCI_PRODUCT_SIS_900: + return(1); + case PCI_PRODUCT_SIS_7016: + return(1); + } + + return(0); + +} + +/* + * Attach the interface. Allocate softc structures, do ifmedia + * setup and ethernet/BPF attach. + */ +void sis_attach(parent, self, aux) + struct device *parent, *self; + void *aux; +{ + int s; + const char *intrstr = NULL; + u_int32_t command; + struct sis_softc *sc = (struct sis_softc *)self; + struct pci_attach_args *pa = aux; + pci_chipset_tag_t pc = pa->pa_pc; + pci_intr_handle_t ih; + struct ifnet *ifp; + bus_addr_t iobase; + bus_size_t iosize; + + s = splimp(); + sc->sis_unit = sc->sc_dev.dv_unit; + sc->sis_type = SIS_TYPE_900; + + /* + * Handle power management nonsense. + */ + command = pci_conf_read(pc, pa->pa_tag, SIS_PCI_CAPID) & 0x000000FF; + if (command == 0x01) { + + command = pci_conf_read(pc, pa->pa_tag, SIS_PCI_PWRMGMTCTRL); + if (command & SIS_PSTATE_MASK) { + u_int32_t iobase, membase, irq; + + /* Save important PCI config data. */ + iobase = pci_conf_read(pc, pa->pa_tag, SIS_PCI_LOIO); + membase = pci_conf_read(pc, pa->pa_tag, SIS_PCI_LOMEM); + irq = pci_conf_read(pc, pa->pa_tag, SIS_PCI_INTLINE); + + /* Reset the power state. */ + printf("sis%d: chip is in D%d power mode " + "-- setting to D0\n", sc->sis_unit, command & SIS_PSTATE_MASK); + command &= 0xFFFFFFFC; + pci_conf_write(pc, pa->pa_tag, SIS_PCI_PWRMGMTCTRL, command); + + /* Restore PCI config data. */ + pci_conf_write(pc, pa->pa_tag, SIS_PCI_LOIO, iobase); + pci_conf_write(pc, pa->pa_tag, SIS_PCI_LOMEM, membase); + pci_conf_write(pc, pa->pa_tag, SIS_PCI_INTLINE, irq); + } + } + + /* + * Map control/status registers. + */ + command = pci_conf_read(pc, pa->pa_tag, PCI_COMMAND_STATUS_REG); + command |= PCI_COMMAND_IO_ENABLE | PCI_COMMAND_MEM_ENABLE | + PCI_COMMAND_MASTER_ENABLE; + pci_conf_write(pc, pa->pa_tag, PCI_COMMAND_STATUS_REG, command); + command = pci_conf_read(pc, pa->pa_tag, PCI_COMMAND_STATUS_REG); + +#ifdef SIS_USEIOSPACE + if (!(command & PCI_COMMAND_IO_ENABLE)) { + printf(": failed to enable I/O ports\n"); + goto fail; + } + if (pci_io_find(pc, pa->pa_tag, SIS_PCI_LOIO, &iobase, &iosize)) { + printf(": can't find I/O space\n"); + goto fail; + } + if (bus_space_map(pa->pa_iot, iobase, iosize, 0, &sc->sis_bhandle)) { + printf(": can't map I/O space\n"); + goto fail; + } + sc->sis_btag = pa->pa_iot; +#else + if (!(command & PCI_COMMAND_MEM_ENABLE)) { + printf(": failed to enable memory mapping\n"); + goto fail; + } + if (pci_mem_find(pc, pa->pa_tag, SIS_PCI_LOMEM, &iobase, &iosize,NULL)){ + printf(": can't find mem space\n"); + goto fail; + } + if (bus_space_map(pa->pa_memt, iobase, iosize, 0, &sc->sis_bhandle)) { + printf(": can't map mem space\n"); + goto fail; + } + sc->sis_btag = pa->pa_memt; +#endif + + /* Allocate interrupt */ + if (pci_intr_map(pc, pa->pa_intrtag, pa->pa_intrpin, pa->pa_intrline, + &ih)) { + printf(": couldn't map interrupt\n"); + goto fail; + } + intrstr = pci_intr_string(pc, ih); + sc->sc_ih = pci_intr_establish(pc, ih, IPL_NET, sis_intr, sc, + self->dv_xname); + if (sc->sc_ih == NULL) { + printf(": couldn't establish interrupt"); + if (intrstr != NULL) + printf(" at %s", intrstr); + printf("\n"); + goto fail; + } + printf(": %s", intrstr); + + /* Reset the adapter. */ + sis_reset(sc); + + /* + * Get station address from the EEPROM. + */ + sis_read_eeprom(sc, (caddr_t)&sc->arpcom.ac_enaddr, SIS_EE_NODEADDR,3,0); + + printf(" address %s\n", ether_sprintf(sc->arpcom.ac_enaddr)); + + sc->sis_ldata_ptr = malloc(sizeof(struct sis_list_data) + 8, + M_DEVBUF, M_NOWAIT); + if (sc->sis_ldata_ptr == NULL) { + printf("%s: no memory for list buffers!\n", sc->sis_unit); + goto fail; + } + + sc->sis_ldata = (struct sis_list_data *)sc->sis_ldata_ptr; + bzero(sc->sis_ldata, sizeof(struct sis_list_data)); + + ifp = &sc->arpcom.ac_if; + ifp->if_softc = sc; + ifp->if_mtu = ETHERMTU; + ifp->if_flags = IFF_BROADCAST | IFF_SIMPLEX | IFF_MULTICAST; + ifp->if_ioctl = sis_ioctl; + ifp->if_output = ether_output; + ifp->if_start = sis_start; + ifp->if_watchdog = sis_watchdog; + ifp->if_baudrate = 10000000; + ifp->if_snd.ifq_maxlen = SIS_TX_LIST_CNT - 1; + bcopy(sc->sc_dev.dv_xname, ifp->if_xname, IFNAMSIZ); + + sc->sc_mii.mii_ifp = ifp; + sc->sc_mii.mii_readreg = sis_miibus_readreg; + sc->sc_mii.mii_writereg = sis_miibus_writereg; + sc->sc_mii.mii_statchg = sis_miibus_statchg; + ifmedia_init(&sc->sc_mii.mii_media, 0, sis_ifmedia_upd,sis_ifmedia_sts); + mii_phy_probe(self, &sc->sc_mii, 0xffffffff); + if (LIST_FIRST(&sc->sc_mii.mii_phys) == NULL) { + ifmedia_add(&sc->sc_mii.mii_media, IFM_ETHER|IFM_NONE, 0, NULL); + ifmedia_set(&sc->sc_mii.mii_media, IFM_ETHER|IFM_NONE); + } else + ifmedia_set(&sc->sc_mii.mii_media, IFM_ETHER|IFM_AUTO); + + /* + * Call MI attach routines. + */ + if_attach(ifp); + ether_ifattach(ifp); + +#if NBPFILTER > 0 + bpfattach(&sc->arpcom.ac_if.if_bpf, ifp, DLT_EN10MB, + sizeof(struct ether_header)); +#endif + shutdownhook_establish(sis_shutdown, sc); + +fail: + splx(s); + return; +} + +/* + * Initialize the transmit descriptors. + */ +int sis_list_tx_init(sc) + struct sis_softc *sc; +{ + struct sis_list_data *ld; + struct sis_ring_data *cd; + int i; + + cd = &sc->sis_cdata; + ld = sc->sis_ldata; + + for (i = 0; i < SIS_TX_LIST_CNT; i++) { + if (i == (SIS_TX_LIST_CNT - 1)) { + ld->sis_tx_list[i].sis_nextdesc = + &ld->sis_tx_list[0]; + ld->sis_tx_list[i].sis_next = + vtophys(&ld->sis_tx_list[0]); + } else { + ld->sis_tx_list[i].sis_nextdesc = + &ld->sis_tx_list[i + 1]; + ld->sis_tx_list[i].sis_next = + vtophys(&ld->sis_tx_list[i + 1]); + } + ld->sis_tx_list[i].sis_mbuf = NULL; + ld->sis_tx_list[i].sis_ptr = 0; + ld->sis_tx_list[i].sis_ctl = 0; + } + + cd->sis_tx_prod = cd->sis_tx_cons = cd->sis_tx_cnt = 0; + + return(0); +} + + +/* + * Initialize the RX descriptors and allocate mbufs for them. Note that + * we arrange the descriptors in a closed ring, so that the last descriptor + * points back to the first. + */ +int sis_list_rx_init(sc) + struct sis_softc *sc; +{ + struct sis_list_data *ld; + struct sis_ring_data *cd; + int i; + + ld = sc->sis_ldata; + cd = &sc->sis_cdata; + + for (i = 0; i < SIS_RX_LIST_CNT; i++) { + if (sis_newbuf(sc, &ld->sis_rx_list[i], NULL) == ENOBUFS) + return(ENOBUFS); + if (i == (SIS_RX_LIST_CNT - 1)) { + ld->sis_rx_list[i].sis_nextdesc = + &ld->sis_rx_list[0]; + ld->sis_rx_list[i].sis_next = + vtophys(&ld->sis_rx_list[0]); + } else { + ld->sis_rx_list[i].sis_nextdesc = + &ld->sis_rx_list[i + 1]; + ld->sis_rx_list[i].sis_next = + vtophys(&ld->sis_rx_list[i + 1]); + } + } + + cd->sis_rx_prod = 0; + + return(0); +} + +/* + * Initialize an RX descriptor and attach an MBUF cluster. + */ +int sis_newbuf(sc, c, m) + struct sis_softc *sc; + struct sis_desc *c; + struct mbuf *m; +{ + struct mbuf *m_new = NULL; + + if (m == NULL) { + MGETHDR(m_new, M_DONTWAIT, MT_DATA); + if (m_new == NULL) { + printf("sis%d: no memory for rx list " + "-- packet dropped!\n", sc->sis_unit); + return(ENOBUFS); + } + + MCLGET(m_new, M_DONTWAIT); + if (!(m_new->m_flags & M_EXT)) { + printf("sis%d: no memory for rx list " + "-- packet dropped!\n", sc->sis_unit); + m_freem(m_new); + return(ENOBUFS); + } + m_new->m_len = m_new->m_pkthdr.len = MCLBYTES; + } else { + m_new = m; + m_new->m_len = m_new->m_pkthdr.len = MCLBYTES; + m_new->m_data = m_new->m_ext.ext_buf; + } + + m_adj(m_new, sizeof(u_int64_t)); + + c->sis_mbuf = m_new; + c->sis_ptr = vtophys(mtod(m_new, caddr_t)); + c->sis_ctl = SIS_RXLEN; + + return(0); +} + +/* + * A frame has been uploaded: pass the resulting mbuf chain up to + * the higher level protocols. + */ +void sis_rxeof(sc) + struct sis_softc *sc; +{ + struct ether_header *eh; + struct mbuf *m; + struct ifnet *ifp; + struct sis_desc *cur_rx; + int i, total_len = 0; + u_int32_t rxstat; + + ifp = &sc->arpcom.ac_if; + i = sc->sis_cdata.sis_rx_prod; + + while(SIS_OWNDESC(&sc->sis_ldata->sis_rx_list[i])) { + struct mbuf *m0 = NULL; + + cur_rx = &sc->sis_ldata->sis_rx_list[i]; + rxstat = cur_rx->sis_rxstat; + m = cur_rx->sis_mbuf; + cur_rx->sis_mbuf = NULL; + total_len = SIS_RXBYTES(cur_rx); + SIS_INC(i, SIS_RX_LIST_CNT); + + /* + * If an error occurs, update stats, clear the + * status word and leave the mbuf cluster in place: + * it should simply get re-used next time this descriptor + * comes up in the ring. + */ + if (!(rxstat & SIS_CMDSTS_PKT_OK)) { + ifp->if_ierrors++; + if (rxstat & SIS_RXSTAT_COLL) + ifp->if_collisions++; + sis_newbuf(sc, cur_rx, m); + continue; + } + + /* No errors; receive the packet. */ + m0 = m_devget(mtod(m, char *) - ETHER_ALIGN, + total_len + ETHER_ALIGN, 0, ifp, NULL); + sis_newbuf(sc, cur_rx, m); + if (m0 == NULL) { + ifp->if_ierrors++; + continue; + } + m_adj(m0, ETHER_ALIGN); + m = m0; + + ifp->if_ipackets++; + eh = mtod(m, struct ether_header *); + +#if NBPFILTER > 0 + if (ifp->if_bpf) + bpf_mtap(ifp->if_bpf, m); +#endif + + /* Remove header from mbuf and pass it on. */ + m_adj(m, sizeof(struct ether_header)); + ether_input(ifp, eh, m); + } + + sc->sis_cdata.sis_rx_prod = i; + + return; +} + +void sis_rxeoc(sc) + struct sis_softc *sc; +{ + sis_rxeof(sc); + sis_init(sc); + return; +} + +/* + * A frame was downloaded to the chip. It's safe for us to clean up + * the list buffers. + */ + +void sis_txeof(sc) + struct sis_softc *sc; +{ + struct sis_desc *cur_tx = NULL; + struct ifnet *ifp; + u_int32_t idx; + + ifp = &sc->arpcom.ac_if; + + /* Clear the timeout timer. */ + ifp->if_timer = 0; + + /* + * Go through our tx list and free mbufs for those + * frames that have been transmitted. + */ + idx = sc->sis_cdata.sis_tx_cons; + while (idx != sc->sis_cdata.sis_tx_prod) { + cur_tx = &sc->sis_ldata->sis_tx_list[idx]; + + if (SIS_OWNDESC(cur_tx)) + break; + + if (cur_tx->sis_ctl & SIS_CMDSTS_MORE) { + sc->sis_cdata.sis_tx_cnt--; + SIS_INC(idx, SIS_TX_LIST_CNT); + continue; + } + + if (!(cur_tx->sis_ctl & SIS_CMDSTS_PKT_OK)) { + ifp->if_oerrors++; + if (cur_tx->sis_txstat & SIS_TXSTAT_EXCESSCOLLS) + ifp->if_collisions++; + if (cur_tx->sis_txstat & SIS_TXSTAT_OUTOFWINCOLL) + ifp->if_collisions++; + } + + ifp->if_collisions += + (cur_tx->sis_txstat & SIS_TXSTAT_COLLCNT) >> 16; + + ifp->if_opackets++; + if (cur_tx->sis_mbuf != NULL) { + m_freem(cur_tx->sis_mbuf); + cur_tx->sis_mbuf = NULL; + } + + sc->sis_cdata.sis_tx_cnt--; + SIS_INC(idx, SIS_TX_LIST_CNT); + ifp->if_timer = 0; + } + + sc->sis_cdata.sis_tx_cons = idx; + + if (cur_tx != NULL) + ifp->if_flags &= ~IFF_OACTIVE; + + return; +} + +void sis_tick(xsc) + void *xsc; +{ + struct sis_softc *sc = (struct sis_softc *)xsc; + struct mii_data *mii; + int s; + + s = splimp(); + + mii = &sc->sc_mii; + mii_tick(mii); + timeout(sis_tick, sc, hz); + + splx(s); + + return; +} + +int sis_intr(arg) + void *arg; +{ + struct sis_softc *sc; + struct ifnet *ifp; + u_int32_t status; + int claimed = 0; + + sc = arg; + ifp = &sc->arpcom.ac_if; + + /* Supress unwanted interrupts */ + if (!(ifp->if_flags & IFF_UP)) { + sis_stop(sc); + return claimed; + } + + /* Disable interrupts. */ + CSR_WRITE_4(sc, SIS_IER, 0); + + for (;;) { + /* Reading the ISR register clears all interrupts. */ + status = CSR_READ_4(sc, SIS_ISR); + + if ((status & SIS_INTRS) == 0) + break; + + claimed = 1; + + if ((status & SIS_ISR_TX_OK) || + (status & SIS_ISR_TX_ERR) || + (status & SIS_ISR_TX_IDLE)) + sis_txeof(sc); + + if (status & SIS_ISR_RX_OK) + sis_rxeof(sc); + + if ((status & SIS_ISR_RX_ERR) || + (status & SIS_ISR_RX_OFLOW)) { + sis_rxeoc(sc); + } + + if (status & SIS_ISR_SYSERR) { + sis_reset(sc); + sis_init(sc); + } + } + + /* Re-enable interrupts. */ + CSR_WRITE_4(sc, SIS_IER, 1); + + if (ifp->if_snd.ifq_head != NULL) + sis_start(ifp); + + return claimed; +} + +/* + * Encapsulate an mbuf chain in a descriptor by coupling the mbuf data + * pointers to the fragment pointers. + */ +int sis_encap(sc, m_head, txidx) + struct sis_softc *sc; + struct mbuf *m_head; + u_int32_t *txidx; +{ + struct sis_desc *f = NULL; + struct mbuf *m; + int frag, cur, cnt = 0; + + /* + * Start packing the mbufs in this chain into + * the fragment pointers. Stop when we run out + * of fragments or hit the end of the mbuf chain. + */ + m = m_head; + cur = frag = *txidx; + + for (m = m_head; m != NULL; m = m->m_next) { + if (m->m_len != 0) { + if ((SIS_TX_LIST_CNT - + (sc->sis_cdata.sis_tx_cnt + cnt)) < 2) + return(ENOBUFS); + f = &sc->sis_ldata->sis_tx_list[frag]; + f->sis_ctl = SIS_CMDSTS_MORE | m->m_len; + f->sis_ptr = vtophys(mtod(m, vm_offset_t)); + if (cnt != 0) + f->sis_ctl |= SIS_CMDSTS_OWN; + cur = frag; + SIS_INC(frag, SIS_TX_LIST_CNT); + cnt++; + } + } + + if (m != NULL) + return(ENOBUFS); + + sc->sis_ldata->sis_tx_list[cur].sis_mbuf = m_head; + sc->sis_ldata->sis_tx_list[cur].sis_ctl &= ~SIS_CMDSTS_MORE; + sc->sis_ldata->sis_tx_list[*txidx].sis_ctl |= SIS_CMDSTS_OWN; + sc->sis_cdata.sis_tx_cnt += cnt; + *txidx = frag; + + return(0); +} + +/* + * Main transmit routine. To avoid having to do mbuf copies, we put pointers + * to the mbuf data regions directly in the transmit lists. We also save a + * copy of the pointers since the transmit list fragment pointers are + * physical addresses. + */ + +void sis_start(ifp) + struct ifnet *ifp; +{ + struct sis_softc *sc; + struct mbuf *m_head = NULL; + u_int32_t idx; + + sc = ifp->if_softc; + + idx = sc->sis_cdata.sis_tx_prod; + + if (ifp->if_flags & IFF_OACTIVE) + return; + + while(sc->sis_ldata->sis_tx_list[idx].sis_mbuf == NULL) { + IF_DEQUEUE(&ifp->if_snd, m_head); + if (m_head == NULL) + break; + + if (sis_encap(sc, m_head, &idx)) { + IF_PREPEND(&ifp->if_snd, m_head); + ifp->if_flags |= IFF_OACTIVE; + break; + } + + /* + * If there's a BPF listener, bounce a copy of this frame + * to him. + */ +#if NBPFILTER > 0 + if (ifp->if_bpf) + bpf_mtap(ifp->if_bpf, m_head); +#endif + } + + /* Transmit */ + sc->sis_cdata.sis_tx_prod = idx; + SIS_SETBIT(sc, SIS_CSR, SIS_CSR_TX_ENABLE); + + /* + * Set a timeout in case the chip goes out to lunch. + */ + ifp->if_timer = 5; + + return; +} + +void sis_init(xsc) + void *xsc; +{ + struct sis_softc *sc = (struct sis_softc *)xsc; + struct ifnet *ifp = &sc->arpcom.ac_if; + struct mii_data *mii; + int s; + + s = splimp(); + + /* + * Cancel pending I/O and free all RX/TX buffers. + */ + sis_stop(sc); + + mii = &sc->sc_mii; + + /* Set MAC address */ + CSR_WRITE_4(sc, SIS_RXFILT_CTL, SIS_FILTADDR_PAR0); + CSR_WRITE_4(sc, SIS_RXFILT_DATA, + ((u_int16_t *)sc->arpcom.ac_enaddr)[0]); + CSR_WRITE_4(sc, SIS_RXFILT_CTL, SIS_FILTADDR_PAR1); + CSR_WRITE_4(sc, SIS_RXFILT_DATA, + ((u_int16_t *)sc->arpcom.ac_enaddr)[1]); + CSR_WRITE_4(sc, SIS_RXFILT_CTL, SIS_FILTADDR_PAR2); + CSR_WRITE_4(sc, SIS_RXFILT_DATA, + ((u_int16_t *)sc->arpcom.ac_enaddr)[2]); + + /* Init circular RX list. */ + if (sis_list_rx_init(sc) == ENOBUFS) { + printf("sis%d: initialization failed: no " + "memory for rx buffers\n", sc->sis_unit); + sis_stop(sc); + (void)splx(s); + return; + } + + /* + * Init tx descriptors. + */ + sis_list_tx_init(sc); + + /* If we want promiscuous mode, set the allframes bit. */ + if (ifp->if_flags & IFF_PROMISC) { + SIS_SETBIT(sc, SIS_RXFILT_CTL, SIS_RXFILTCTL_ALLPHYS); + } else { + SIS_CLRBIT(sc, SIS_RXFILT_CTL, SIS_RXFILTCTL_ALLPHYS); + } + + /* + * Set the capture broadcast bit to capture broadcast frames. + */ + if (ifp->if_flags & IFF_BROADCAST) { + SIS_SETBIT(sc, SIS_RXFILT_CTL, SIS_RXFILTCTL_BROAD); + } else { + SIS_CLRBIT(sc, SIS_RXFILT_CTL, SIS_RXFILTCTL_BROAD); + } + + /* + * Load the multicast filter. + */ + sis_setmulti(sc); + + /* Turn the receive filter on */ + SIS_SETBIT(sc, SIS_RXFILT_CTL, SIS_RXFILTCTL_ENABLE); + + /* + * Load the address of the RX and TX lists. + */ + CSR_WRITE_4(sc, SIS_RX_LISTPTR, + vtophys(&sc->sis_ldata->sis_rx_list[0])); + CSR_WRITE_4(sc, SIS_TX_LISTPTR, + vtophys(&sc->sis_ldata->sis_tx_list[0])); + + /* Set RX configuration */ + CSR_WRITE_4(sc, SIS_RX_CFG, SIS_RXCFG); + /* Set TX configuration */ + CSR_WRITE_4(sc, SIS_TX_CFG, SIS_TXCFG); + + /* + * Enable interrupts. + */ + CSR_WRITE_4(sc, SIS_IMR, SIS_INTRS); + CSR_WRITE_4(sc, SIS_IER, 1); + + /* Enable receiver and transmitter. */ + SIS_CLRBIT(sc, SIS_CSR, SIS_CSR_TX_DISABLE|SIS_CSR_RX_DISABLE); + SIS_SETBIT(sc, SIS_CSR, SIS_CSR_RX_ENABLE); + + mii_mediachg(mii); + + ifp->if_flags |= IFF_RUNNING; + ifp->if_flags &= ~IFF_OACTIVE; + + (void)splx(s); + + timeout(sis_tick, sc, hz); + + return; +} + +/* + * Set media options. + */ +int sis_ifmedia_upd(ifp) + struct ifnet *ifp; +{ + struct sis_softc *sc; + + sc = ifp->if_softc; + + if (ifp->if_flags & IFF_UP) + sis_init(sc); + + return(0); +} + +/* + * Report current media status. + */ +void sis_ifmedia_sts(ifp, ifmr) + struct ifnet *ifp; + struct ifmediareq *ifmr; +{ + struct sis_softc *sc; + struct mii_data *mii; + + sc = ifp->if_softc; + + mii = &sc->sc_mii; + mii_pollstat(mii); + ifmr->ifm_active = mii->mii_media_active; + ifmr->ifm_status = mii->mii_media_status; + + return; +} + +int sis_ioctl(ifp, command, data) + struct ifnet *ifp; + u_long command; + caddr_t data; +{ + struct sis_softc *sc = ifp->if_softc; + struct ifreq *ifr = (struct ifreq *) data; + struct ifaddr *ifa = (struct ifaddr *)data; + struct mii_data *mii; + int s, error = 0; + + s = splimp(); + + if ((error = ether_ioctl(ifp, &sc->arpcom, command, data)) > 0) { + splx(s); + return error; + } + + switch(command) { + case SIOCSIFADDR: + ifp->if_flags |= IFF_UP; + switch (ifa->ifa_addr->sa_family) { + case AF_INET: + sis_init(sc); + arp_ifinit(&sc->arpcom, ifa); + break; + default: + sis_init(sc); + break; + } + break; + case SIOCSIFFLAGS: + if (ifp->if_flags & IFF_UP) { + sis_init(sc); + } else { + if (ifp->if_flags & IFF_RUNNING) + sis_stop(sc); + } + error = 0; + break; + case SIOCADDMULTI: + case SIOCDELMULTI: + sis_setmulti(sc); + error = 0; + break; + case SIOCGIFMEDIA: + case SIOCSIFMEDIA: + mii = &sc->sc_mii; + error = ifmedia_ioctl(ifp, ifr, &mii->mii_media, command); + break; + default: + error = EINVAL; + break; + } + + (void)splx(s); + + return(error); +} + +void sis_watchdog(ifp) + struct ifnet *ifp; +{ + struct sis_softc *sc; + + sc = ifp->if_softc; + + ifp->if_oerrors++; + printf("sis%d: watchdog timeout\n", sc->sis_unit); + + sis_stop(sc); + sis_reset(sc); + sis_init(sc); + + if (ifp->if_snd.ifq_head != NULL) + sis_start(ifp); + + return; +} + +/* + * Stop the adapter and free any mbufs allocated to the + * RX and TX lists. + */ +void sis_stop(sc) + struct sis_softc *sc; +{ + register int i; + struct ifnet *ifp; + + ifp = &sc->arpcom.ac_if; + ifp->if_timer = 0; + + untimeout(sis_tick, sc); + CSR_WRITE_4(sc, SIS_IER, 0); + CSR_WRITE_4(sc, SIS_IMR, 0); + SIS_SETBIT(sc, SIS_CSR, SIS_CSR_TX_DISABLE|SIS_CSR_RX_DISABLE); + DELAY(1000); + CSR_WRITE_4(sc, SIS_TX_LISTPTR, 0); + CSR_WRITE_4(sc, SIS_RX_LISTPTR, 0); + + /* + * Free data in the RX lists. + */ + for (i = 0; i < SIS_RX_LIST_CNT; i++) { + if (sc->sis_ldata->sis_rx_list[i].sis_mbuf != NULL) { + m_freem(sc->sis_ldata->sis_rx_list[i].sis_mbuf); + sc->sis_ldata->sis_rx_list[i].sis_mbuf = NULL; + } + } + bzero((char *)&sc->sis_ldata->sis_rx_list, + sizeof(sc->sis_ldata->sis_rx_list)); + + /* + * Free the TX list buffers. + */ + for (i = 0; i < SIS_TX_LIST_CNT; i++) { + if (sc->sis_ldata->sis_tx_list[i].sis_mbuf != NULL) { + m_freem(sc->sis_ldata->sis_tx_list[i].sis_mbuf); + sc->sis_ldata->sis_tx_list[i].sis_mbuf = NULL; + } + } + + bzero((char *)&sc->sis_ldata->sis_tx_list, + sizeof(sc->sis_ldata->sis_tx_list)); + + ifp->if_flags &= ~(IFF_RUNNING | IFF_OACTIVE); + + return; +} + +/* + * Stop all chip I/O so that the kernel's probe routines don't + * get confused by errant DMAs when rebooting. + */ +void sis_shutdown(v) + void *v; +{ + struct sis_softc *sc = (struct sis_softc *)v; + + sis_stop(sc); +} + +struct cfattach sis_ca = { + sizeof(struct sis_softc), sis_probe, sis_attach +}; + +struct cfdriver sis_cd = { + 0, "sis", DV_IFNET +}; + diff --git a/sys/dev/pci/if_sisreg.h b/sys/dev/pci/if_sisreg.h new file mode 100644 index 00000000000..910f42b5ff2 --- /dev/null +++ b/sys/dev/pci/if_sisreg.h @@ -0,0 +1,404 @@ +/* $OpenBSD: if_sisreg.h,v 1.1 1999/12/04 20:27:37 aaron Exp $ */ +/* + * Copyright (c) 1997, 1998, 1999 + * Bill Paul <wpaul@ee.columbia.edu>. All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * 3. All advertising materials mentioning features or use of this software + * must display the following acknowledgement: + * This product includes software developed by Bill Paul. + * 4. Neither the name of the author nor the names of any co-contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY Bill Paul AND CONTRIBUTORS ``AS IS'' AND + * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + * ARE DISCLAIMED. IN NO EVENT SHALL Bill Paul OR THE VOICES IN HIS HEAD + * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR + * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF + * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS + * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN + * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) + * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF + * THE POSSIBILITY OF SUCH DAMAGE. + * + * $FreeBSD: src/sys/pci/if_sisreg.h,v 1.1 1999/09/05 21:00:59 wpaul Exp $ + */ + +/* + * Register definitions for the SiS 900 and SiS 7016 chipsets. The + * 7016 is actually an older chip and some of its registers differ + * from the 900, however the core operational registers are the same: + * the differences lie in the OnNow/Wake on LAN stuff which we don't + * use anyway. The 7016 needs an external MII compliant PHY while the + * SiS 900 has one built in. All registers are 32-bits wide. + */ + +/* Registers common to SiS 900 and SiS 7016 */ +#define SIS_CSR 0x00 +#define SIS_CFG 0x04 +#define SIS_EECTL 0x08 +#define SIS_PCICTL 0x0C +#define SIS_ISR 0x10 +#define SIS_IMR 0x14 +#define SIS_IER 0x18 +#define SIS_PHYCTL 0x1C +#define SIS_TX_LISTPTR 0x20 +#define SIS_TX_CFG 0x24 +#define SIS_RX_LISTPTR 0x30 +#define SIS_RX_CFG 0x34 +#define SIS_FLOWCTL 0x38 +#define SIS_RXFILT_CTL 0x48 +#define SIS_RXFILT_DATA 0x4C +#define SIS_PWRMAN_CTL 0xB0 +#define SIS_PWERMAN_WKUP_EVENT 0xB4 +#define SIS_WKUP_FRAME_CRC 0xBC +#define SIS_WKUP_FRAME_MASK0 0xC0 +#define SIS_WKUP_FRAME_MASKXX 0xEC + +/* SiS 7016 specific registers */ +#define SIS_SILICON_REV 0x5C +#define SIS_MIB_CTL0 0x60 +#define SIS_MIB_CTL1 0x64 +#define SIS_MIB_CTL2 0x68 +#define SIS_MIB_CTL3 0x6C +#define SIS_MIB 0x80 +#define SIS_LINKSTS 0xA0 +#define SIS_TIMEUNIT 0xA4 +#define SIS_GPIO 0xB8 + +#define SIS_CSR_TX_ENABLE 0x00000001 +#define SIS_CSR_TX_DISABLE 0x00000002 +#define SIS_CSR_RX_ENABLE 0x00000004 +#define SIS_CSR_RX_DISABLE 0x00000008 +#define SIS_CSR_TX_RESET 0x00000010 +#define SIS_CSR_RX_RESET 0x00000020 +#define SIS_CSR_SOFTINTR 0x00000080 +#define SIS_CSR_RESET 0x00000100 + +#define SIS_CFG_BIGENDIAN 0x00000001 +#define SIS_CFG_PERR_DETECT 0x00000008 +#define SIS_CFG_DEFER_DISABLE 0x00000010 +#define SIS_CFG_OUTOFWIN_TIMER 0x00000020 +#define SIS_CFG_SINGLE_BACKOFF 0x00000040 +#define SIS_CFG_PCIREQ_ALG 0x00000080 + +#define SIS_EECTL_DIN 0x00000001 +#define SIS_EECTL_DOUT 0x00000002 +#define SIS_EECTL_CLK 0x00000004 +#define SIS_EECTL_CSEL 0x00000008 + +#define SIS_EECMD_WRITE 0x140 +#define SIS_EECMD_READ 0x180 +#define SIS_EECMD_ERASE 0x1c0 + +#define SIS_EE_NODEADDR 0x8 + +#define SIS_PCICTL_SRAMADDR 0x0000001F +#define SIS_PCICTL_RAMTSTENB 0x00000020 +#define SIS_PCICTL_TXTSTENB 0x00000040 +#define SIS_PCICTL_RXTSTENB 0x00000080 +#define SIS_PCICTL_BMTSTENB 0x00000200 +#define SIS_PCICTL_RAMADDR 0x001F0000 +#define SIS_PCICTL_ROMTIME 0x0F000000 +#define SIS_PCICTL_DISCTEST 0x40000000 + +#define SIS_ISR_RX_OK 0x00000001 +#define SIS_ISR_RX_DESC_OK 0x00000002 +#define SIS_ISR_RX_ERR 0x00000004 +#define SIS_ISR_RX_EARLY 0x00000008 +#define SIS_ISR_RX_IDLE 0x00000010 +#define SIS_ISR_RX_OFLOW 0x00000020 +#define SIS_ISR_TX_OK 0x00000040 +#define SIS_ISR_TX_DESC_OK 0x00000080 +#define SIS_ISR_TX_ERR 0x00000100 +#define SIS_ISR_TX_IDLE 0x00000200 +#define SIS_ISR_TX_UFLOW 0x00000400 +#define SIS_ISR_SOFTINTR 0x00000800 +#define SIS_ISR_HIBITS 0x00008000 +#define SIS_ISR_RX_FIFO_OFLOW 0x00010000 +#define SIS_ISR_TGT_ABRT 0x00100000 +#define SIS_ISR_BM_ABRT 0x00200000 +#define SIS_ISR_SYSERR 0x00400000 +#define SIS_ISR_PARITY_ERR 0x00800000 +#define SIS_ISR_RX_RESET_DONE 0x01000000 +#define SIS_ISR_TX_RESET_DONE 0x02000000 +#define SIS_ISR_TX_PAUSE_START 0x04000000 +#define SIS_ISR_TX_PAUSE_DONE 0x08000000 +#define SIS_ISR_WAKE_EVENT 0x10000000 + +#define SIS_IMR_RX_OK 0x00000001 +#define SIS_IMR_RX_DESC_OK 0x00000002 +#define SIS_IMR_RX_ERR 0x00000004 +#define SIS_IMR_RX_EARLY 0x00000008 +#define SIS_IMR_RX_IDLE 0x00000010 +#define SIS_IMR_RX_OFLOW 0x00000020 +#define SIS_IMR_TX_OK 0x00000040 +#define SIS_IMR_TX_DESC_OK 0x00000080 +#define SIS_IMR_TX_ERR 0x00000100 +#define SIS_IMR_TX_IDLE 0x00000200 +#define SIS_IMR_TX_UFLOW 0x00000400 +#define SIS_IMR_SOFTINTR 0x00000800 +#define SIS_IMR_HIBITS 0x00008000 +#define SIS_IMR_RX_FIFO_OFLOW 0x00010000 +#define SIS_IMR_TGT_ABRT 0x00100000 +#define SIS_IMR_BM_ABRT 0x00200000 +#define SIS_IMR_SYSERR 0x00400000 +#define SIS_IMR_PARITY_ERR 0x00800000 +#define SIS_IMR_RX_RESET_DONE 0x01000000 +#define SIS_IMR_TX_RESET_DONE 0x02000000 +#define SIS_IMR_TX_PAUSE_START 0x04000000 +#define SIS_IMR_TX_PAUSE_DONE 0x08000000 +#define SIS_IMR_WAKE_EVENT 0x10000000 + +#define SIS_INTRS \ + (SIS_IMR_RX_OFLOW|SIS_IMR_TX_UFLOW|SIS_IMR_TX_OK|\ + SIS_IMR_TX_IDLE|SIS_IMR_RX_OK|SIS_IMR_RX_ERR|\ + SIS_IMR_SYSERR) + +#define SIS_IER_INTRENB 0x00000001 + +#define SIS_PHYCTL_ACCESS 0x00000010 +#define SIS_PHYCTL_OP 0x00000020 +#define SIS_PHYCTL_REGADDR 0x000007C0 +#define SIS_PHYCTL_PHYADDR 0x0000F800 +#define SIS_PHYCTL_PHYDATA 0xFFFF0000 + +#define SIS_PHYOP_READ 0x00000020 +#define SIS_PHYOP_WRITE 0x00000000 + +#define SIS_TXCFG_DRAIN_THRESH 0x0000003F /* 32-byte units */ +#define SIS_TXCFG_FILL_THRESH 0x00003F00 /* 32-byte units */ +#define SIS_TXCFG_DMABURST 0x00700000 +#define SIS_TXCFG_AUTOPAD 0x10000000 +#define SIS_TXCFG_LOOPBK 0x20000000 +#define SIS_TXCFG_IGN_HBEAT 0x40000000 +#define SIS_TXCFG_IGN_CARR 0x80000000 + +#define SIS_TXCFG_DRAIN(x) (((x) >> 5) & SIS_TXCFG_DRAIN_THRESH) +#define SIS_TXCFG_FILL(x) ((((x) >> 5) << 8) & SIS_TXCFG_FILL_THRESH) + +#define SIS_TXDMA_512BYTES 0x00000000 +#define SIS_TXDMA_4BYTES 0x00100000 +#define SIS_TXDMA_8BYTES 0x00200000 +#define SIS_TXDMA_16BYTES 0x00300000 +#define SIS_TXDMA_32BYTES 0x00400000 +#define SIS_TXDMA_64BYTES 0x00500000 +#define SIS_TXDMA_128BYTES 0x00600000 +#define SIS_TXDMA_256BYTES 0x00700000 + +#define SIS_TXCFG \ + (SIS_TXDMA_64BYTES|SIS_TXCFG_AUTOPAD|\ + SIS_TXCFG_FILL(64)|SIS_TXCFG_DRAIN(1500)) + +#define SIS_RXCFG_DRAIN_THRESH 0x0000003E /* 8-byte units */ +#define SIS_RXCFG_DMABURST 0x00700000 +#define SIS_RXCFG_RX_JABBER 0x08000000 +#define SIS_RXCFG_RX_TXPKTS 0x10000000 +#define SIS_RXCFG_RX_RUNTS 0x40000000 +#define SIS_RXCFG_RX_GIANTS 0x80000000 + +#define SIS_RXCFG_DRAIN(x) ((((x) >> 3) << 1) & SIS_RXCFG_DRAIN_THRESH) + +#define SIS_RXDMA_512BYTES 0x00000000 +#define SIS_RXDMA_4BYTES 0x00100000 +#define SIS_RXDMA_8BYTES 0x00200000 +#define SIS_RXDMA_16BYTES 0x00300000 +#define SIS_RXDMA_32BYTES 0x00400000 +#define SIS_RXDMA_64BYTES 0x00500000 +#define SIS_RXDMA_128BYTES 0x00600000 +#define SIS_RXDMA_256BYTES 0x00700000 + +#define SIS_RXCFG \ + (SIS_RXCFG_DRAIN(64)|SIS_RXDMA_256BYTES) + +#define SIS_RXFILTCTL_ADDR 0x000F0000 +#define SIS_RXFILTCTL_ALLPHYS 0x10000000 +#define SIS_RXFILTCTL_ALLMULTI 0x20000000 +#define SIS_RXFILTCTL_BROAD 0x40000000 +#define SIS_RXFILTCTL_ENABLE 0x80000000 + +#define SIS_FILTADDR_PAR0 0x00000000 +#define SIS_FILTADDR_PAR1 0x00010000 +#define SIS_FILTADDR_PAR2 0x00020000 +#define SIS_FILTADDR_MAR0 0x00040000 +#define SIS_FILTADDR_MAR1 0x00050000 +#define SIS_FILTADDR_MAR2 0x00060000 +#define SIS_FILTADDR_MAR3 0x00070000 +#define SIS_FILTADDR_MAR4 0x00080000 +#define SIS_FILTADDR_MAR5 0x00090000 +#define SIS_FILTADDR_MAR6 0x000A0000 +#define SIS_FILTADDR_MAR7 0x000B0000 + +/* + * DMA descriptor structures. The first part of the descriptor + * is the hardware descriptor format, which is just three longwords. + * After this, we include some additional structure members for + * use by the driver. Note that for this structure will be a different + * size on the alpha, but that's okay as long as it's a multiple of 4 + * bytes in size. + */ +struct sis_desc { + /* SiS hardware descriptor section */ + u_int32_t sis_next; + u_int32_t sis_cmdsts; +#define sis_rxstat sis_cmdsts +#define sis_txstat sis_cmdsts +#define sis_ctl sis_cmdsts + u_int32_t sis_ptr; + /* Driver software section */ + struct mbuf *sis_mbuf; + struct sis_desc *sis_nextdesc; +}; + +#define SIS_CMDSTS_BUFLEN 0x00000FFF +#define SIS_CMDSTS_PKT_OK 0x08000000 +#define SIS_CMDSTS_CRC 0x10000000 +#define SIS_CMDSTS_INTR 0x20000000 +#define SIS_CMDSTS_MORE 0x40000000 +#define SIS_CMDSTS_OWN 0x80000000 + +#define SIS_LASTDESC(x) (!((x)->sis_ctl & SIS_CMDSTS_MORE))) +#define SIS_OWNDESC(x) ((x)->sis_ctl & SIS_CMDSTS_OWN) +#define SIS_INC(x, y) (x) = (x + 1) % y +#define SIS_RXBYTES(x) ((x)->sis_ctl & SIS_CMDSTS_BUFLEN) + +#define SIS_RXSTAT_COLL 0x00010000 +#define SIS_RXSTAT_LOOPBK 0x00020000 +#define SIS_RXSTAT_ALIGNERR 0x00040000 +#define SIS_RXSTAT_CRCERR 0x00080000 +#define SIS_RXSTAT_SYMBOLERR 0x00100000 +#define SIS_RXSTAT_RUNT 0x00200000 +#define SIS_RXSTAT_GIANT 0x00400000 +#define SIS_RXSTAT_DSTCLASS 0x01800000 +#define SIS_RXSTAT_OVERRUN 0x02000000 +#define SIS_RXSTAT_RX_ABORT 0x04000000 + +#define SIS_DSTCLASS_REJECT 0x00000000 +#define SIS_DSTCLASS_UNICAST 0x00800000 +#define SIS_DSTCLASS_MULTICAST 0x01000000 +#define SIS_DSTCLASS_BROADCAST 0x02000000 + +#define SIS_TXSTAT_COLLCNT 0x000F0000 +#define SIS_TXSTAT_EXCESSCOLLS 0x00100000 +#define SIS_TXSTAT_OUTOFWINCOLL 0x00200000 +#define SIS_TXSTAT_EXCESS_DEFER 0x00400000 +#define SIS_TXSTAT_DEFERED 0x00800000 +#define SIS_TXSTAT_CARR_LOST 0x01000000 +#define SIS_TXSTAT_UNDERRUN 0x02000000 +#define SIS_TXSTAT_TX_ABORT 0x04000000 + +#define SIS_RX_LIST_CNT 64 +#define SIS_TX_LIST_CNT 128 + +struct sis_list_data { + struct sis_desc sis_rx_list[SIS_RX_LIST_CNT]; + struct sis_desc sis_tx_list[SIS_TX_LIST_CNT]; +}; + +struct sis_ring_data { + int sis_rx_prod; + int sis_tx_prod; + int sis_tx_cons; + int sis_tx_cnt; +}; + + +/* + * SiS PCI vendor ID. + */ +#define SIS_VENDORID 0x1039 + +/* + * SiS PCI device IDs + */ +#define SIS_DEVICEID_900 0x0900 +#define SIS_DEVICEID_7016 0x7016 + +struct sis_type { + u_int16_t sis_vid; + u_int16_t sis_did; + char *sis_name; +}; + +#define SIS_TYPE_900 1 +#define SIS_TYPE_7016 2 + +struct sis_softc { + struct device sc_dev; /* generic device structure */ + void *sc_ih; /* interrupt handler cookie */ + struct arpcom arpcom; /* interface info */ + mii_data_t sc_mii; + bus_space_handle_t sis_bhandle; + bus_space_tag_t sis_btag; + u_int8_t sis_unit; + u_int8_t sis_type; + struct sis_list_data *sis_ldata; + caddr_t sis_ldata_ptr; + struct sis_ring_data sis_cdata; +}; + +/* + * register space access macros + */ +#define CSR_WRITE_4(sc, reg, val) \ + bus_space_write_4(sc->sis_btag, sc->sis_bhandle, reg, val) + +#define CSR_READ_4(sc, reg) \ + bus_space_read_4(sc->sis_btag, sc->sis_bhandle, reg) + +#define SIS_TIMEOUT 1000 +#define ETHER_ALIGN 2 +#define SIS_RXLEN 1536 +#define SIS_MIN_FRAMELEN 60 + +/* + * PCI low memory base and low I/O base register, and + * other PCI registers. + */ + +#define SIS_PCI_VENDOR_ID 0x00 +#define SIS_PCI_DEVICE_ID 0x02 +#define SIS_PCI_COMMAND 0x04 +#define SIS_PCI_STATUS 0x06 +#define SIS_PCI_REVID 0x08 +#define SIS_PCI_CLASSCODE 0x09 +#define SIS_PCI_CACHELEN 0x0C +#define SIS_PCI_LATENCY_TIMER 0x0D +#define SIS_PCI_HEADER_TYPE 0x0E +#define SIS_PCI_LOIO 0x10 +#define SIS_PCI_LOMEM 0x14 +#define SIS_PCI_BIOSROM 0x30 +#define SIS_PCI_INTLINE 0x3C +#define SIS_PCI_INTPIN 0x3D +#define SIS_PCI_MINGNT 0x3E +#define SIS_PCI_MINLAT 0x0F +#define SIS_PCI_RESETOPT 0x48 +#define SIS_PCI_EEPROM_DATA 0x4C + +/* power management registers */ +#define SIS_PCI_CAPID 0x50 /* 8 bits */ +#define SIS_PCI_NEXTPTR 0x51 /* 8 bits */ +#define SIS_PCI_PWRMGMTCAP 0x52 /* 16 bits */ +#define SIS_PCI_PWRMGMTCTRL 0x54 /* 16 bits */ + +#define SIS_PSTATE_MASK 0x0003 +#define SIS_PSTATE_D0 0x0000 +#define SIS_PSTATE_D1 0x0001 +#define SIS_PSTATE_D2 0x0002 +#define SIS_PSTATE_D3 0x0003 +#define SIS_PME_EN 0x0010 +#define SIS_PME_STATUS 0x8000 + +#ifdef __alpha__ +#undef vtophys +#define vtophys(va) alpha_XXX_dmamap((vm_offset_t)va) +#endif |