diff options
Diffstat (limited to 'sys/scsi/scsi_base.c')
| -rw-r--r-- | sys/scsi/scsi_base.c | 359 |
1 files changed, 350 insertions, 9 deletions
diff --git a/sys/scsi/scsi_base.c b/sys/scsi/scsi_base.c index b006bbfe6e1..dc63f43afbc 100644 --- a/sys/scsi/scsi_base.c +++ b/sys/scsi/scsi_base.c @@ -1,4 +1,4 @@ -/* $OpenBSD: scsi_base.c,v 1.45 2003/12/24 13:20:05 krw Exp $ */ +/* $OpenBSD: scsi_base.c,v 1.46 2004/01/02 05:30:32 krw Exp $ */ /* $NetBSD: scsi_base.c,v 1.43 1997/04/02 02:29:36 mycroft Exp $ */ /* @@ -829,6 +829,13 @@ static const struct { { 0x00, 0x13, "Audio Play Operation Successfully Completed" }, { 0x00, 0x14, "Audio Play Operation Stopped Due to Error" }, { 0x00, 0x15, "No Current Audio Status To Return" }, + { 0x00, 0x16, "Operation In Progress" }, + { 0x00, 0x17, "Cleaning Requested" }, + { 0x00, 0x18, "Erase Operation In Progress" }, + { 0x00, 0x19, "Locate Operation In Progress" }, + { 0x00, 0x1A, "Rewind Operation In Progress" }, + { 0x00, 0x1B, "Set Capacity Operation In Progress" }, + { 0x00, 0x1C, "Verify Operation In Progress" }, { 0x01, 0x00, "No Index/Sector Signal" }, { 0x02, 0x00, "No Seek Complete" }, { 0x03, 0x00, "Peripheral Device Write Fault" }, @@ -839,34 +846,77 @@ static const struct { { 0x04, 0x02, "Logical Unit Not Ready, Initialization Command Required" }, { 0x04, 0x03, "Logical Unit Not Ready, Manual Intervention Required" }, { 0x04, 0x04, "Logical Unit Not Ready, Format In Progress" }, + { 0x04, 0x05, "Logical Unit Not Ready, Rebuild In Progress" }, + { 0x04, 0x06, "Logical Unit Not Ready, Recalculation In Progress" }, + { 0x04, 0x07, "Logical Unit Not Ready, Operation In Progress" }, + { 0x04, 0x08, "Logical Unit Not Ready, Long Write In Progress" }, + { 0x04, 0x09, "Logical Unit Not Ready, Self-Test In Progress" }, + { 0x04, 0x0A, "Logical Unit Not Accessible, Asymmetric Access State Transition" }, + { 0x04, 0x0B, "Logical Unit Not Accessible, Target Port In Standby State" }, + { 0x04, 0x0C, "Logical Unit Not Accessible, Target Port In Unavailable State" }, + { 0x04, 0x10, "Logical Unit Not Ready, Auxiliary Memory Not Accessible" }, + { 0x04, 0x11, "Logical Unit Not Ready, Notify (Enable Spinup) Required" }, { 0x05, 0x00, "Logical Unit Does Not Respond To Selection" }, { 0x06, 0x00, "No Reference Position Found" }, { 0x07, 0x00, "Multiple Peripheral Devices Selected" }, { 0x08, 0x00, "Logical Unit Communication Failure" }, { 0x08, 0x01, "Logical Unit Communication Timeout" }, { 0x08, 0x02, "Logical Unit Communication Parity Error" }, + { 0x08, 0x03, "Logical Unit Communication CRC Error (ULTRA-DMA/32)" }, + { 0x08, 0x04, "Unreachable Copy Target" }, { 0x09, 0x00, "Track Following Error" }, { 0x09, 0x01, "Tracking Servo Failure" }, { 0x09, 0x02, "Focus Servo Failure" }, { 0x09, 0x03, "Spindle Servo Failure" }, + { 0x09, 0x04, "Head Select Fault" }, { 0x0A, 0x00, "Error Log Overflow" }, + { 0x0B, 0x00, "Warning" }, + { 0x0B, 0x01, "Warning - Specified Temperature Exceeded" }, + { 0x0B, 0x02, "Warning - Enclosure Degraded" }, { 0x0C, 0x00, "Write Error" }, { 0x0C, 0x01, "Write Error Recovered with Auto Reallocation" }, { 0x0C, 0x02, "Write Error - Auto Reallocate Failed" }, + { 0x0C, 0x03, "Write Error - Recommend Reassignment" }, + { 0x0C, 0x04, "Compression Check Miscompare Error" }, + { 0x0C, 0x05, "Data Expansion Occurred During Compression" }, + { 0x0C, 0x06, "Block Not Compressible" }, + { 0x0C, 0x07, "Write Error - Recovery Needed" }, + { 0x0C, 0x08, "Write Error - Recovery Failed" }, + { 0x0C, 0x09, "Write Error - Loss Of Streaming" }, + { 0x0C, 0x0A, "Write Error - Padding Blocks Added" }, + { 0x0C, 0x0B, "Auxiliary Memory Write Error" }, + { 0x0C, 0x0C, "Write Error - Unexpected Unsolicited Data" }, + { 0x0C, 0x0D, "Write Error - Not Enough Unsolicited Data" }, + { 0x0D, 0x00, "Error Detected By Third Party Temporary Initiator" }, + { 0x0D, 0x01, "Third Party Device Failure" }, + { 0x0D, 0x02, "Copy Target Device Not Reachable" }, + { 0x0D, 0x03, "Incorrect Copy Target Device Type" }, + { 0x0D, 0x04, "Copy Target Device Data Underrun" }, + { 0x0D, 0x05, "Copy Target Device Data Overrun" }, + { 0x0E, 0x00, "Invalid Information Unit" }, + { 0x0E, 0x01, "Information Unit Too Short" }, + { 0x0E, 0x02, "Information Unit Too Long" }, { 0x10, 0x00, "ID CRC Or ECC Error" }, { 0x11, 0x00, "Unrecovered Read Error" }, - { 0x11, 0x01, "Read Retried Exhausted" }, + { 0x11, 0x01, "Read Retries Exhausted" }, { 0x11, 0x02, "Error Too Long To Correct" }, { 0x11, 0x03, "Multiple Read Errors" }, { 0x11, 0x04, "Unrecovered Read Error - Auto Reallocate Failed" }, { 0x11, 0x05, "L-EC Uncorrectable Error" }, { 0x11, 0x06, "CIRC Unrecovered Error" }, { 0x11, 0x07, "Data Resynchronization Error" }, - { 0x11, 0x08, "Incomplete Block Found" }, + { 0x11, 0x08, "Incomplete Block Read" }, { 0x11, 0x09, "No Gap Found" }, { 0x11, 0x0A, "Miscorrected Error" }, { 0x11, 0x0B, "Uncorrected Read Error - Recommend Reassignment" }, - { 0x11, 0x0C, "Uncorrected Read Error - Recommend Rewrite the Data" }, + { 0x11, 0x0C, "Uncorrected Read Error - Recommend Rewrite The Data" }, + { 0x11, 0x0D, "De-Compression CRC Error" }, + { 0x11, 0x0E, "Cannot Decompress Using Declared Algorithm" }, + { 0x11, 0x0F, "Error Reading UPC/EAN Number" }, + { 0x11, 0x10, "Error Reading ISRC Number" }, + { 0x11, 0x11, "Read Error - Loss Of Streaming" }, + { 0x11, 0x12, "Auxiliary Memory Read Error" }, + { 0x11, 0x13, "Read Error - Failed Retransmission Request" }, { 0x12, 0x00, "Address Mark Not Found for ID Field" }, { 0x13, 0x00, "Address Mark Not Found for Data Field" }, { 0x14, 0x00, "Recorded Entity Not Found" }, @@ -874,10 +924,17 @@ static const struct { { 0x14, 0x02, "Filemark or Setmark Not Found" }, { 0x14, 0x03, "End-Of-Data Not Found" }, { 0x14, 0x04, "Block Sequence Error" }, + { 0x14, 0x05, "Record Not Found - Recommend Reassignment" }, + { 0x14, 0x06, "Record Not Found - Data Auto-Reallocated" }, + { 0x14, 0x07, "Locate Operation Failure" }, { 0x15, 0x00, "Random Positioning Error" }, { 0x15, 0x01, "Mechanical Positioning Error" }, { 0x15, 0x02, "Positioning Error Detected By Read of Medium" }, { 0x16, 0x00, "Data Synchronization Mark Error" }, + { 0x16, 0x01, "Data Sync Error - Data Rewritten" }, + { 0x16, 0x02, "Data Sync Error - Recommend Rewrite" }, + { 0x16, 0x03, "Data Sync Error - Data Auto-Reallocated" }, + { 0x16, 0x04, "Data Sync Error - Recommend Reassignment" }, { 0x17, 0x00, "Recovered Data With No Error Correction Applied" }, { 0x17, 0x01, "Recovered Data With Retries" }, { 0x17, 0x02, "Recovered Data With Positive Head Offset" }, @@ -887,13 +944,16 @@ static const struct { { 0x17, 0x06, "Recovered Data Without ECC - Data Auto-Reallocated" }, { 0x17, 0x07, "Recovered Data Without ECC - Recommend Reassignment" }, { 0x17, 0x08, "Recovered Data Without ECC - Recommend Rewrite" }, + { 0x17, 0x09, "Recovered Data Without ECC - Data Rewritten" }, { 0x18, 0x00, "Recovered Data With Error Correction Applied" }, { 0x18, 0x01, "Recovered Data With Error Correction & Retries Applied" }, { 0x18, 0x02, "Recovered Data - Data Auto-Reallocated" }, { 0x18, 0x03, "Recovered Data With CIRC" }, - { 0x18, 0x04, "Recovered Data With LEC" }, + { 0x18, 0x04, "Recovered Data With L-EC" }, { 0x18, 0x05, "Recovered Data - Recommend Reassignment" }, { 0x18, 0x06, "Recovered Data - Recommend Rewrite" }, + { 0x18, 0x07, "Recovered Data With ECC - Data Rewritten" }, + { 0x18, 0x08, "Recovered Data With Linking" }, { 0x19, 0x00, "Defect List Error" }, { 0x19, 0x01, "Defect List Not Available" }, { 0x19, 0x02, "Defect List Error in Primary List" }, @@ -905,43 +965,123 @@ static const struct { { 0x1C, 0x02, "Grown Defect List Not Found" }, { 0x1D, 0x00, "Miscompare During Verify Operation" }, { 0x1E, 0x00, "Recovered ID with ECC" }, + { 0x1F, 0x00, "Partial Defect List Transfer" }, { 0x20, 0x00, "Invalid Command Operation Code" }, + { 0x20, 0x01, "Access Denied - Initiator Pending-Enrolled" }, + { 0x20, 0x02, "Access Denied - No Access rights" }, + { 0x20, 0x03, "Access Denied - Invalid Mgmt ID Key" }, + { 0x20, 0x04, "Illegal Command While In Write Capable State" }, + { 0x20, 0x05, "Obsolete" }, + { 0x20, 0x06, "Illegal Command While In Explicit Address Mode" }, + { 0x20, 0x07, "Illegal Command While In Implicit Address Mode" }, + { 0x20, 0x08, "Access Denied - Enrollment Conflict" }, + { 0x20, 0x09, "Access Denied - Invalid LU Identifier" }, + { 0x20, 0x0A, "Access Denied - Invalid Proxy Token" }, + { 0x20, 0x0B, "Access DEnied - ACL LUN Conflict" }, { 0x21, 0x00, "Logical Block Address Out of Range" }, { 0x21, 0x01, "Invalid Element Address" }, + { 0x21, 0x02, "Invalid Address For Write" }, { 0x22, 0x00, "Illegal Function (Should 20 00, 24 00, or 26 00)" }, { 0x24, 0x00, "Illegal Field in CDB" }, + { 0x24, 0x01, "CDB Decryption Error" }, + { 0x24, 0x02, "Obsolete" }, + { 0x24, 0x03, "Obsolete" }, + { 0x24, 0x04, "Security Audit Value Frozen" }, + { 0x24, 0x05, "Security Working Key Frozen" }, + { 0x24, 0x06, "Nonce Not Unique" }, + { 0x24, 0x07, "Nonce Timestamp Out Of Range" }, { 0x25, 0x00, "Logical Unit Not Supported" }, { 0x26, 0x00, "Invalid Field In Parameter List" }, { 0x26, 0x01, "Parameter Not Supported" }, { 0x26, 0x02, "Parameter Value Invalid" }, { 0x26, 0x03, "Threshold Parameters Not Supported" }, + { 0x26, 0x04, "Invalid Release Of Persistent Reservation" }, + { 0x26, 0x05, "Data Decryption Error" }, + { 0x26, 0x06, "Too Many Target Descriptors" }, + { 0x26, 0x07, "Unsupported Target Descriptor Type Code" }, + { 0x26, 0x08, "Too Many Segment Descriptors" }, + { 0x26, 0x09, "Unsupported Segment Descriptor Type Code" }, + { 0x26, 0x0A, "Unexpected Inexact Segment" }, + { 0x26, 0x0B, "Inline Data Length Exceeded" }, + { 0x26, 0x0C, "Invalid Operation For Copy Source Or Destination" }, + { 0x26, 0x0D, "Copy Segment Granularity Violation" }, + { 0x26, 0x0E, "Invalid Parameter While Port Is Enabled" }, { 0x27, 0x00, "Write Protected" }, + { 0x27, 0x01, "Hardware Write Protected" }, + { 0x27, 0x02, "Logical Unit Software Write Protected" }, + { 0x27, 0x03, "Associated Write Protect" }, + { 0x27, 0x04, "Persistent Write Protect" }, + { 0x27, 0x05, "Permanent Write Protect" }, + { 0x27, 0x06, "Conditional Write Protect" }, { 0x28, 0x00, "Not Ready To Ready Transition (Medium May Have Changed)" }, { 0x28, 0x01, "Import Or Export Element Accessed" }, { 0x29, 0x00, "Power On, Reset, or Bus Device Reset Occurred" }, + { 0x29, 0x01, "Power On Occurred" }, + { 0x29, 0x02, "SCSI Bus Reset Occurred" }, + { 0x29, 0x03, "Bus Device Reset Function Occurred" }, + { 0x29, 0x04, "Device Internal Reset" }, + { 0x29, 0x05, "Transceiver Mode Changed to Single Ended" }, + { 0x29, 0x06, "Transceiver Mode Changed to LVD" }, + { 0x29, 0x07, "I_T Nexus Loss Occurred" }, { 0x2A, 0x00, "Parameters Changed" }, { 0x2A, 0x01, "Mode Parameters Changed" }, { 0x2A, 0x02, "Log Parameters Changed" }, + { 0x2A, 0x03, "Reservations Preempted" }, + { 0x2A, 0x04, "Reservations Released" }, + { 0x2A, 0x05, "Registrations Preempted" }, + { 0x2A, 0x06, "Asymmetric Access State Changed" }, + { 0x2A, 0x07, "Implicit Asymmetric Access State Transition Failed" }, { 0x2B, 0x00, "Copy Cannot Execute Since Host Cannot Disconnect" }, { 0x2C, 0x00, "Command Sequence Error" }, { 0x2C, 0x01, "Too Many Windows Specified" }, { 0x2C, 0x02, "Invalid Combination of Windows Specified" }, + { 0x2C, 0x03, "Current Program Area Is Not Empty" }, + { 0x2C, 0x04, "Current Program Area Is Empty" }, + { 0x2C, 0x05, "Illegal Power Condition Request" }, + { 0x2C, 0x06, "Persistent Prevent Conflict" }, + { 0x2C, 0x07, "Previous Busy Status" }, + { 0x2C, 0x08, "Previous Task Set Full Status" }, + { 0x2C, 0x09, "Previous Reservation Conflict Status" }, + { 0x2C, 0x0A, "Partition Or Collection Contains User Objects" }, { 0x2D, 0x00, "Overwrite Error On Update In Place" }, + { 0x2E, 0x00, "Insufficient Time For Operation" }, { 0x2F, 0x00, "Commands Cleared By Another Initiator" }, { 0x30, 0x00, "Incompatible Medium Installed" }, { 0x30, 0x01, "Cannot Read Medium - Unknown Format" }, { 0x30, 0x02, "Cannot Read Medium - Incompatible Format" }, { 0x30, 0x03, "Cleaning Cartridge Installed" }, + { 0x30, 0x04, "Cannot Write Medium - Unknown Format" }, + { 0x30, 0x05, "Cannot Write Medium - Incompatible Format" }, + { 0x30, 0x06, "Cannot Format Medium - Incompatible Medium" }, + { 0x30, 0x07, "Cleaning Failure" }, + { 0x30, 0x08, "Cannot Write - Application Code Mismatch" }, + { 0x30, 0x09, "Current Session Not Fixated For Append" }, + { 0x30, 0x0A, "Cleaning Request Rejected" }, + { 0x30, 0x10, "Medium Not Formatted" }, { 0x31, 0x00, "Medium Format Corrupted" }, { 0x31, 0x01, "Format Command Failed" }, { 0x32, 0x00, "No Defect Spare Location Available" }, { 0x32, 0x01, "Defect List Update Failure" }, { 0x33, 0x00, "Tape Length Error" }, + { 0x34, 0x00, "Enclosure Failure" }, + { 0x35, 0x00, "Enclosure Services Failure" }, + { 0x35, 0x01, "Unsupported Enclosure Function" }, + { 0x35, 0x02, "Enclosure Services Unavailable" }, + { 0x35, 0x03, "Enclosure Services Transfer Failure" }, + { 0x35, 0x04, "Enclosure Services Transfer Refused" }, { 0x36, 0x00, "Ribbon, Ink, or Toner Failure" }, { 0x37, 0x00, "Rounded Parameter" }, + { 0x38, 0x00, "Event Status Notification" }, + { 0x38, 0x02, "ESN - Power Management Class Event" }, + { 0x38, 0x04, "ESN - Media Class Event" }, + { 0x38, 0x06, "ESN - Device Busy Class Event" }, { 0x39, 0x00, "Saving Parameters Not Supported" }, { 0x3A, 0x00, "Medium Not Present" }, - { 0x3B, 0x00, "Positioning Error" }, + { 0x3A, 0x01, "Medium Not Present - Tray Closed" }, + { 0x3A, 0x02, "Medium Not Present - Tray Open" }, + { 0x3A, 0x03, "Medium Not Present - Loadable" }, + { 0x3A, 0x04, "Medium Not Present - Medium Auxiliary Memory Accessible" }, + { 0x3B, 0x00, "Sequential Positioning Error" }, { 0x3B, 0x01, "Tape Position Error At Beginning-of-Medium" }, { 0x3B, 0x02, "Tape Position Error At End-of-Medium" }, { 0x3B, 0x03, "Tape or Electronic Vertical Forms Unit Not Ready" }, @@ -956,13 +1096,43 @@ static const struct { { 0x3B, 0x0C, "Position Past Beginning Of Medium" }, { 0x3B, 0x0D, "Medium Destination Element Full" }, { 0x3B, 0x0E, "Medium Source Element Empty" }, - { 0x3D, 0x00, "Invalid Bits In IDENTFY Message" }, + { 0x3B, 0x0F, "End Of Medium Reached" }, + { 0x3B, 0x11, "Medium Magazine Not Accessible" }, + { 0x3B, 0x12, "Medium Magazine Removed" }, + { 0x3B, 0x13, "Medium Magazine Inserted" }, + { 0x3B, 0x14, "Medium Magazine Locked" }, + { 0x3B, 0x15, "Medium Magazine Unlocked" }, + { 0x3B, 0x16, "Mechanical Positioning Or Changer Error" }, + { 0x3D, 0x00, "Invalid Bits In IDENTIFY Message" }, { 0x3E, 0x00, "Logical Unit Has Not Self-Configured Yet" }, + { 0x3E, 0x01, "Logical Unit Failure" }, + { 0x3E, 0x02, "Timeout On Logical Unit" }, + { 0x3E, 0x03, "Logical Unit Failed Self-Test" }, + { 0x3E, 0x04, "Logical Unit Unable To Update Self-Test Log" }, { 0x3F, 0x00, "Target Operating Conditions Have Changed" }, { 0x3F, 0x01, "Microcode Has Changed" }, { 0x3F, 0x02, "Changed Operating Definition" }, { 0x3F, 0x03, "INQUIRY Data Has Changed" }, + { 0x3F, 0x04, "component Device Attached" }, + { 0x3F, 0x05, "Device Identifier Changed" }, + { 0x3F, 0x06, "Redundancy Group Created Or Modified" }, + { 0x3F, 0x07, "Redundancy Group Deleted" }, + { 0x3F, 0x08, "Spare Created Or Modified" }, + { 0x3F, 0x09, "Spare Deleted" }, + { 0x3F, 0x0A, "Volume Set Created Or Modified" }, + { 0x3F, 0x0B, "Volume Set Deleted" }, + { 0x3F, 0x0C, "Volume Set Deassigned" }, + { 0x3F, 0x0D, "Volume Set Reassigned" }, + { 0x3F, 0x0E, "Reported LUNs Data Has Changed" }, + { 0x3F, 0x0F, "Echo Buffer Overwritten" }, + { 0x3F, 0x10, "Medium Loadable" }, + { 0x3F, 0x11, "Medium Auxiliary Memory Accessible" }, { 0x40, 0x00, "RAM FAILURE (Should Use 40 NN)" }, + /* + * FIXME + * There is a range from 0x01 to 0xFF on this message + * 0x40 0xNN Diagnostic Failure On Component NN (80H-FFH) + */ { 0x41, 0x00, "Data Path FAILURE (Should Use 40 NN)" }, { 0x42, 0x00, "Power-On or Self-Test FAILURE (Should Use 40 NN)" }, { 0x43, 0x00, "Message Error" }, @@ -970,26 +1140,50 @@ static const struct { { 0x45, 0x00, "Select Or Reselect Failure" }, { 0x46, 0x00, "Unsuccessful Soft Reset" }, { 0x47, 0x00, "SCSI Parity Error" }, - { 0x48, 0x00, "INITIATOR DETECTED ERROR Message Received" }, + { 0x47, 0x01, "Data Phase CRC Error Detected" }, + { 0x47, 0x02, "SCSI Parity Error Detected During ST Data Phase" }, + { 0x47, 0x03, "Information Unit iuCRC Error Detected" }, + { 0x47, 0x04, "Asynchronous Information Protection Error Detected" }, + { 0x47, 0x05, "Protocol Service CRC Error" }, + { 0x47, 0x7F, "Some Commands Cleared By iSCSI Protocol Event" }, + { 0x48, 0x00, "Initiator Detected Error Message Received" }, { 0x49, 0x00, "Invalid Message Error" }, { 0x4A, 0x00, "Command Phase Error" }, { 0x4B, 0x00, "Data Phase Error" }, + { 0x4B, 0x01, "Invalid Target Port Transfer Tag Received" }, + { 0x4B, 0x02, "Too Much Write Data" }, + { 0x4B, 0x03, "ACK/NAK Timeout" }, + { 0x4B, 0x04, "NAK Received" }, + { 0x4B, 0x05, "Data Offset Error" }, + { 0x4B, 0x06, "Initiator Response Timeout" }, { 0x4C, 0x00, "Logical Unit Failed Self-Configuration" }, + /* + * FIXME + * There is a range from 0x00 to 0xFF on this message + * 0x4D 0xNN TAGGED OVERLAPPED COMMANDS (NN = TASK TAG) + */ { 0x4E, 0x00, "Overlapped Commands Attempted" }, { 0x50, 0x00, "Write Append Error" }, { 0x50, 0x01, "Write Append Position Error" }, { 0x50, 0x02, "Position Error Related To Timing" }, { 0x51, 0x00, "Erase Failure" }, + { 0x51, 0x01, "Erase Failure - Incomplete Erase Operation Detected" }, { 0x52, 0x00, "Cartridge Fault" }, { 0x53, 0x00, "Media Load or Eject Failed" }, { 0x53, 0x01, "Unload Tape Failure" }, { 0x53, 0x02, "Medium Removal Prevented" }, { 0x54, 0x00, "SCSI To Host System Interface Failure" }, { 0x55, 0x00, "System Resource Failure" }, + { 0x55, 0x01, "System Buffer Full" }, + { 0x55, 0x02, "Insufficient Reservation Resources" }, + { 0x55, 0x03, "Insufficient Resources" }, + { 0x55, 0x04, "Insufficient Registration Resources" }, + { 0x55, 0x05, "Insufficient Access Control Resources" }, + { 0x55, 0x06, "Auxiliary Memory Out Of Space" }, { 0x57, 0x00, "Unable To Recover Table-Of-Contents" }, { 0x58, 0x00, "Generation Does Not Exist" }, { 0x59, 0x00, "Updated Block Read" }, - { 0x5A, 0x00, "Operator Request or State Change Input (Unspecified)" }, + { 0x5A, 0x00, "Operator Request or State Change Input" }, { 0x5A, 0x01, "Operator Medium Removal Requested" }, { 0x5A, 0x02, "Operator Selected Write Protect" }, { 0x5A, 0x03, "Operator Selected Write Permit" }, @@ -1000,13 +1194,160 @@ static const struct { { 0x5C, 0x00, "RPL Status Change" }, { 0x5C, 0x01, "Spindles Synchronized" }, { 0x5C, 0x02, "Spindles Not Synchronized" }, + { 0x5D, 0x00, "Failure Prediction Threshold Exceeded" }, + { 0x5D, 0x01, "Media Failure Prediction Threshold Exceeded" }, + { 0x5D, 0x02, "Logical Unit Failure Prediction Threshold Exceeded" }, + { 0x5D, 0x03, "Spare Area Exhaustion Prediction Threshold Exceeded" }, + { 0x5D, 0x10, "Hardware Impending Failure General Hard Drive Failure" }, + { 0x5D, 0x11, "Hardware Impending Failure Drive Error Rate Too High" }, + { 0x5D, 0x12, "Hardware Impending Failure Data Error Rate Too High" }, + { 0x5D, 0x13, "Hardware Impending Failure Seek Error Rate Too High" }, + { 0x5D, 0x14, "Hardware Impending Failure Too Many Block Reassigns" }, + { 0x5D, 0x15, "Hardware Impending Failure Access Times Too High" }, + { 0x5D, 0x16, "Hardware Impending Failure Start Unit Times Too High" }, + { 0x5D, 0x17, "Hardware Impending Failure Channel Parametrics" }, + { 0x5D, 0x18, "Hardware Impending Failure Controller Detected" }, + { 0x5D, 0x19, "Hardware Impending Failure Throughput Performance" }, + { 0x5D, 0x1A, "Hardware Impending Failure Seek Time Performance" }, + { 0x5D, 0x1B, "Hardware Impending Failure Spin-Up Retry Count" }, + { 0x5D, 0x1C, "Hardware Impending Failure Drive Calibration Retry Count" }, + { 0x5D, 0x20, "Controller Impending Failure General Hard Drive Failure" }, + { 0x5D, 0x21, "Controller Impending Failure Drive Error Rate Too High" }, + { 0x5D, 0x22, "Controller Impending Failure Data Error Rate Too High" }, + { 0x5D, 0x23, "Controller Impending Failure Seek Error Rate Too High" }, + { 0x5D, 0x24, "Controller Impending Failure Too Many Block Reassigns" }, + { 0x5D, 0x25, "Controller Impending Failure Access Times Too High" }, + { 0x5D, 0x26, "Controller Impending Failure Start Unit Times Too High" }, + { 0x5D, 0x27, "Controller Impending Failure Channel Parametrics" }, + { 0x5D, 0x28, "Controller Impending Failure Controller Detected" }, + { 0x5D, 0x29, "Controller Impending Failure Throughput Performance" }, + { 0x5D, 0x2A, "Controller Impending Failure Seek Time Performance" }, + { 0x5D, 0x2B, "Controller Impending Failure Spin-Up Retry Count" }, + { 0x5D, 0x2C, "Controller Impending Failure Drive Calibration Retry Count" }, + { 0x5D, 0x30, "Data Channel Impending Failure General Hard Drive Failure" }, + { 0x5D, 0x31, "Data Channel Impending Failure Drive Error Rate Too High" }, + { 0x5D, 0x32, "Data Channel Impending Failure Data Error Rate Too High" }, + { 0x5D, 0x33, "Data Channel Impending Failure Seek Error Rate Too High" }, + { 0x5D, 0x34, "Data Channel Impending Failure Too Many Block Reassigns" }, + { 0x5D, 0x35, "Data Channel Impending Failure Access Times Too High" }, + { 0x5D, 0x36, "Data Channel Impending Failure Start Unit Times Too High" }, + { 0x5D, 0x37, "Data Channel Impending Failure Channel Parametrics" }, + { 0x5D, 0x38, "Data Channel Impending Failure Controller Detected" }, + { 0x5D, 0x39, "Data Channel Impending Failure Throughput Performance" }, + { 0x5D, 0x3A, "Data Channel Impending Failure Seek Time Performance" }, + { 0x5D, 0x3B, "Data Channel Impending Failure Spin-Up Retry Count" }, + { 0x5D, 0x3C, "Data Channel Impending Failure Drive Calibration Retry Count" }, + { 0x5D, 0x40, "Servo Impending Failure General Hard Drive Failure" }, + { 0x5D, 0x41, "Servo Impending Failure Drive Error Rate Too High" }, + { 0x5D, 0x42, "Servo Impending Failure Data Error Rate Too High" }, + { 0x5D, 0x43, "Servo Impending Failure Seek Error Rate Too High" }, + { 0x5D, 0x44, "Servo Impending Failure Too Many Block Reassigns" }, + { 0x5D, 0x45, "Servo Impending Failure Access Times Too High" }, + { 0x5D, 0x46, "Servo Impending Failure Start Unit Times Too High" }, + { 0x5D, 0x47, "Servo Impending Failure Channel Parametrics" }, + { 0x5D, 0x48, "Servo Impending Failure Controller Detected" }, + { 0x5D, 0x49, "Servo Impending Failure Throughput Performance" }, + { 0x5D, 0x4A, "Servo Impending Failure Seek Time Performance" }, + { 0x5D, 0x4B, "Servo Impending Failure Spin-Up Retry Count" }, + { 0x5D, 0x4C, "Servo Impending Failure Drive Calibration Retry Count" }, + { 0x5D, 0x50, "Spindle Impending Failure General Hard Drive Failure" }, + { 0x5D, 0x51, "Spindle Impending Failure Drive Error Rate Too High" }, + { 0x5D, 0x52, "Spindle Impending Failure Data Error Rate Too High" }, + { 0x5D, 0x53, "Spindle Impending Failure Seek Error Rate Too High" }, + { 0x5D, 0x54, "Spindle Impending Failure Too Many Block Reassigns" }, + { 0x5D, 0x55, "Spindle Impending Failure Access Times Too High" }, + { 0x5D, 0x56, "Spindle Impending Failure Start Unit Times Too High" }, + { 0x5D, 0x57, "Spindle Impending Failure Channel Parametrics" }, + { 0x5D, 0x58, "Spindle Impending Failure Controller Detected" }, + { 0x5D, 0x59, "Spindle Impending Failure Throughput Performance" }, + { 0x5D, 0x5A, "Spindle Impending Failure Seek Time Performance" }, + { 0x5D, 0x5B, "Spindle Impending Failure Spin-Up Retry Count" }, + { 0x5D, 0x5C, "Spindle Impending Failure Drive Calibration Retry Count" }, + { 0x5D, 0x60, "Firmware Impending Failure General Hard Drive Failure" }, + { 0x5D, 0x61, "Firmware Impending Failure Drive Error Rate Too High" }, + { 0x5D, 0x62, "Firmware Impending Failure Data Error Rate Too High" }, + { 0x5D, 0x63, "Firmware Impending Failure Seek Error Rate Too High" }, + { 0x5D, 0x64, "Firmware Impending Failure Too Many Block Reassigns" }, + { 0x5D, 0x65, "Firmware Impending Failure Access Times Too High" }, + { 0x5D, 0x66, "Firmware Impending Failure Start Unit Times Too High" }, + { 0x5D, 0x67, "Firmware Impending Failure Channel Parametrics" }, + { 0x5D, 0x68, "Firmware Impending Failure Controller Detected" }, + { 0x5D, 0x69, "Firmware Impending Failure Throughput Performance" }, + { 0x5D, 0x6A, "Firmware Impending Failure Seek Time Performance" }, + { 0x5D, 0x6B, "Firmware Impending Failure Spin-Up Retry Count" }, + { 0x5D, 0x6C, "Firmware Impending Failure Drive Calibration Retry Count" }, + { 0x5D, 0xFF, "Failure Prediction Threshold Exceeded (false)" }, + { 0x5E, 0x00, "Low Power Condition On" }, + { 0x5E, 0x01, "Idle Condition Activated By Timer" }, + { 0x5E, 0x02, "Standby Condition Activated By Timer" }, + { 0x5E, 0x03, "Idle Condition Activated By Command" }, + { 0x5E, 0x04, "Standby Condition Activated By Command" }, + { 0x5E, 0x41, "Power State Change To Active" }, + { 0x5E, 0x42, "Power State Change To Idle" }, + { 0x5E, 0x43, "Power State Change To Standby" }, + { 0x5E, 0x45, "Power State Change To Sleep" }, + { 0x5E, 0x47, "Power State Change To Device Control" }, { 0x60, 0x00, "Lamp Failure" }, { 0x61, 0x00, "Video Acquisition Error" }, { 0x61, 0x01, "Unable To Acquire Video" }, { 0x61, 0x02, "Out Of Focus" }, { 0x62, 0x00, "Scan Head Positioning Error" }, { 0x63, 0x00, "End Of User Area Encountered On This Track" }, + { 0x63, 0x01, "Packet Does Not Fit In Available Space" }, { 0x64, 0x00, "Illegal Mode For This Track" }, + { 0x64, 0x01, "Invalid Packet Size" }, + { 0x65, 0x00, "Voltage Fault" }, + { 0x66, 0x00, "Automatic Document Feeder Cover Up" }, + { 0x66, 0x01, "Automatic Document Feeder Lift Up" }, + { 0x66, 0x02, "Document Jam In Automatic Document Feeder" }, + { 0x66, 0x03, "Document Miss Feed Automatic In Document Feeder" }, + { 0x67, 0x00, "Configuration Failure" }, + { 0x67, 0x01, "Configuration Of Incapable Logical Units Failed" }, + { 0x67, 0x02, "Add Logical Unit Failed" }, + { 0x67, 0x03, "Modification Of Logical Unit Failed" }, + { 0x67, 0x04, "Exchange Of Logical Unit Failed" }, + { 0x67, 0x05, "Remove Of Logical Unit Failed" }, + { 0x67, 0x06, "Attachment Of Logical Unit Failed" }, + { 0x67, 0x07, "Creation Of Logical Unit Failed" }, + { 0x67, 0x08, "Assign Failure Occurred" }, + { 0x67, 0x09, "Multiply Assigned Logical Unit" }, + { 0x67, 0x0A, "Set Target Port Groups Command Failed" }, + { 0x68, 0x00, "Logical Unit Not Configured" }, + { 0x69, 0x00, "Data Loss On Logical Unit" }, + { 0x69, 0x01, "Multiple Logical Unit Failures" }, + { 0x69, 0x02, "Parity/Data Mismatch" }, + { 0x6A, 0x00, "Informational, Refer To Log" }, + { 0x6B, 0x00, "State Change Has Occurred" }, + { 0x6B, 0x01, "Redundancy Level Got Better" }, + { 0x6B, 0x02, "Redundancy Level Got Worse" }, + { 0x6C, 0x00, "Rebuild Failure Occurred" }, + { 0x6D, 0x00, "Recalculate Failure Occurred" }, + { 0x6E, 0x00, "Command To Logical Unit Failed" }, + { 0x6F, 0x00, "Copy Protection Key Exchange Failure - Authentication Failure" }, + { 0x6F, 0x01, "Copy Protection Key Exchange Failure - Key Not Present" }, + { 0x6F, 0x02, "Copy Protection Key Exchange Failure - Key Not Established" }, + { 0x6F, 0x03, "Read Of Scrambled Sector Without Authentication" }, + { 0x6F, 0x04, "Media Region Code Is Mismatched To Logical Unit Region" }, + { 0x6F, 0x05, "Drive Region Must Be Permanent/Region Reset Count Error" }, + /* + * FIXME + * There is a range from 0x00 to 0xFF on this message + * 0x70 0xNN Decompression Exception Short Algorithm ID Of NN + */ + { 0x71, 0x00, "Decompression Exception Long Algorithm ID" }, + { 0x72, 0x00, "Session Fixation Error" }, + { 0x72, 0x01, "Session Fixation Error Writing Lead-In" }, + { 0x72, 0x02, "Session Fixation Error Writing Lead-Out" }, + { 0x72, 0x03, "Session Fixation Error - Incomplete Track In Session" }, + { 0x72, 0x04, "Empty Or Partially Written Reserved Track" }, + { 0x72, 0x05, "No More Track Reservations Allowed" }, + { 0x73, 0x00, "CD Control Error" }, + { 0x73, 0x01, "Power Calibration Area Almost Full" }, + { 0x73, 0x02, "Power Calibration Area Is Full" }, + { 0x73, 0x03, "Power Calibration Area Error" }, + { 0x73, 0x04, "Program Memory Area Update Failure" }, + { 0x73, 0x05, "Program Memory Area Is Full" }, + { 0x73, 0x06, "RMA/PMA Is Almost Full" }, { 0x00, 0x00, NULL } }; |