diff options
Diffstat (limited to 'sys')
| -rw-r--r-- | sys/dev/pci/mbg.c | 117 |
1 files changed, 91 insertions, 26 deletions
diff --git a/sys/dev/pci/mbg.c b/sys/dev/pci/mbg.c index a5ba23a4489..7c79d71f79d 100644 --- a/sys/dev/pci/mbg.c +++ b/sys/dev/pci/mbg.c @@ -1,7 +1,7 @@ -/* $OpenBSD: mbg.c,v 1.13 2007/03/22 16:55:31 deraadt Exp $ */ +/* $OpenBSD: mbg.c,v 1.14 2007/09/30 19:58:43 mbalmer Exp $ */ /* - * Copyright (c) 2006 Marc Balmer <mbalmer@openbsd.org> + * Copyright (c) 2006, 2007 Marc Balmer <mbalmer@openbsd.org> * * Permission to use, copy, modify, and distribute this software for any * purpose with or without fee is hereby granted, provided that the above @@ -53,14 +53,22 @@ struct mbg_time { u_int8_t min; u_int8_t hour; u_int8_t mday; - u_int8_t wday; + u_int8_t wday; /* 1 (monday) - 7 (sunday) */ u_int8_t mon; - u_int8_t year; + u_int8_t year; /* 0 - 99 */ u_int8_t status; u_int8_t signal; int8_t utc_off; }; +struct mbg_time_hr { + u_int32_t sec; /* seconds since the epoch */ + u_int32_t frac; /* fractions of second */ + int32_t utc_off; /* UTC offset in seconds */ + u_int16_t status; + u_int8_t signal; +}; + /* mbg_time.status bits */ #define MBG_FREERUN 0x01 /* clock running on xtal */ #define MBG_DST_ENA 0x02 /* DST enabled */ @@ -90,7 +98,7 @@ struct mbg_time { /* commands */ #define MBG_GET_TIME 0x00 #define MBG_GET_SYNC_TIME 0x02 -#define MBG_GET_HR_TIME 0x03 +#define MBG_GET_TIME_HR 0x03 #define MBG_GET_FW_ID_1 0x40 #define MBG_GET_FW_ID_2 0x41 #define MBG_GET_SERNUM 0x42 @@ -101,10 +109,13 @@ struct mbg_time { #define MBG_BUSY 0x01 #define MBG_SIG_BIAS 55 #define MBG_SIG_MAX 68 +#define NSECPERSEC 1000000000LL /* nanoseconds per second */ +#define HRDIVISOR 0x100000000LL / for hi-res timestamp */ int mbg_probe(struct device *, void *, void *); void mbg_attach(struct device *, struct device *, void *); void mbg_task(void *); +void mbg_task_hr(void *); int mbg_read_amcc_s5933(struct mbg_softc *, int cmd, char *buf, size_t len, struct timespec *tstamp); int mbg_read_asic(struct mbg_softc *, int cmd, char *buf, size_t len, @@ -154,14 +165,36 @@ mbg_attach(struct device *parent, struct device *self, void *aux) desc = "Radio clock"; strlcpy(sc->sc_timedelta.desc, desc, sizeof(sc->sc_timedelta.desc)); + strlcpy(sc->sc_sensordev.xname, sc->sc_dev.dv_xname, + sizeof(sc->sc_sensordev.xname)); + + sc->sc_timedelta.type = SENSOR_TIMEDELTA; + sc->sc_timedelta.status = SENSOR_S_UNKNOWN; + sc->sc_timedelta.value = 0LL; + sc->sc_timedelta.flags = 0; + sensor_attach(&sc->sc_sensordev, &sc->sc_timedelta); + + sc->sc_signal.type = SENSOR_PERCENT; + sc->sc_signal.status = SENSOR_S_UNKNOWN; + sc->sc_signal.value = 0LL; + sc->sc_signal.flags = 0; + strlcpy(sc->sc_signal.desc, "Signal strength", + sizeof(sc->sc_signal.desc)); + sensor_attach(&sc->sc_sensordev, &sc->sc_signal); + sensordev_install(&sc->sc_sensordev); + switch (PCI_PRODUCT(pa->pa_id)) { case PCI_PRODUCT_MEINBERG_PCI32: sc->sc_read = mbg_read_amcc_s5933; + sensor_task_register(sc, mbg_task, 10); break; case PCI_PRODUCT_MEINBERG_PCI511: - /* FALLTHROUGH */ + sc->sc_read = mbg_read_asic; + sensor_task_register(sc, mbg_task, 10); + break; case PCI_PRODUCT_MEINBERG_GPS170: sc->sc_read = mbg_read_asic; + sensor_task_register(sc, mbg_task_hr, 1); break; default: /* this can not normally happen, but then there is murphy */ @@ -190,26 +223,6 @@ mbg_attach(struct device *parent, struct device *self, void *aux) printf("invalid\n"); sc->sc_status = tframe.status; } - - strlcpy(sc->sc_sensordev.xname, sc->sc_dev.dv_xname, - sizeof(sc->sc_sensordev.xname)); - - sc->sc_timedelta.type = SENSOR_TIMEDELTA; - sc->sc_timedelta.status = SENSOR_S_UNKNOWN; - sc->sc_timedelta.value = 0LL; - sc->sc_timedelta.flags = 0; - sensor_attach(&sc->sc_sensordev, &sc->sc_timedelta); - - sc->sc_signal.type = SENSOR_PERCENT; - sc->sc_signal.status = SENSOR_S_UNKNOWN; - sc->sc_signal.value = 0LL; - sc->sc_signal.flags = 0; - strlcpy(sc->sc_signal.desc, "Signal strength", - sizeof(sc->sc_signal.desc)); - sensor_attach(&sc->sc_sensordev, &sc->sc_signal); - - sensor_task_register(sc, mbg_task, 10); - sensordev_install(&sc->sc_sensordev); } void @@ -268,6 +281,58 @@ mbg_task(void *arg) } } +void +mbg_task_hr(void *arg) +{ + struct mbg_softc *sc = (struct mbg_softc *)arg; + struct mbg_time_hr tframe; + struct timespec tstamp; + int64_t tlocal, trecv; + int signal; + + if (sc->sc_read(sc, MBG_GET_TIME_HR, (char *)&tframe, sizeof(tframe), + &tstamp)) { + log(LOG_ERR, "%s: error reading hi-res time\n", + sc->sc_dev.dv_xname); + return; + } + if (tframe.status & MBG_INVALID) { + log(LOG_INFO, "%s: invalid time, battery was disconnected\n", + sc->sc_dev.dv_xname); + return; + } + + tlocal = tstamp.tv_sec * NSECPERSEC + tstamp.tv_nsec; + trecv = tframe.sec * NSECPERSEC + (tframe.frac * NSECPERSEC >> 32); + + sc->sc_timedelta.value = tlocal - trecv; + + sc->sc_timedelta.status = SENSOR_S_OK; + sc->sc_timedelta.tv.tv_sec = tstamp.tv_sec; + sc->sc_timedelta.tv.tv_usec = tstamp.tv_nsec / 1000; + + signal = tframe.signal - MBG_SIG_BIAS; + if (signal < 0) + signal = 0; + else if (signal > MBG_SIG_MAX) + signal = MBG_SIG_MAX; + + sc->sc_signal.value = signal * 100000 / MBG_SIG_MAX; + sc->sc_signal.status = SENSOR_S_OK; + sc->sc_signal.tv.tv_sec = sc->sc_timedelta.tv.tv_sec; + sc->sc_signal.tv.tv_usec = sc->sc_timedelta.tv.tv_usec; + + if (tframe.status != sc->sc_status) { + if (tframe.status & MBG_SYNC) + log(LOG_INFO, "%s: clock is synchronized", + sc->sc_dev.dv_xname); + else if (tframe.status & MBG_FREERUN) + log(LOG_INFO, "%s: clock is free running on xtal", + sc->sc_dev.dv_xname); + sc->sc_status = tframe.status; + } +} + /* * send a command and read back results to an AMCC S5933 based card * (i.e. the PCI32 DCF77 radio clock) |