diff options
Diffstat (limited to 'sys')
| -rw-r--r-- | sys/arch/sparc/dev/bwtwo.c | 7 | ||||
| -rw-r--r-- | sys/arch/sparc/dev/cgeight.c | 3 | ||||
| -rw-r--r-- | sys/arch/sparc/dev/cgfour.c | 3 | ||||
| -rw-r--r-- | sys/arch/sparc/dev/cgsix.c | 7 | ||||
| -rw-r--r-- | sys/arch/sparc/dev/cgtwo.c | 3 | ||||
| -rw-r--r-- | sys/arch/sparc/dev/cons.c | 5 | ||||
| -rw-r--r-- | sys/arch/sparc/dev/fb.c | 15 | ||||
| -rw-r--r-- | sys/arch/sparc/include/eeprom.h | 450 |
8 files changed, 336 insertions, 157 deletions
diff --git a/sys/arch/sparc/dev/bwtwo.c b/sys/arch/sparc/dev/bwtwo.c index 78be5d0b885..f629c0cffa4 100644 --- a/sys/arch/sparc/dev/bwtwo.c +++ b/sys/arch/sparc/dev/bwtwo.c @@ -1,3 +1,4 @@ +/* $OpenBSD: bwtwo.c,v 1.13 1996/08/13 08:05:18 downsj Exp $ */ /* $NetBSD: bwtwo.c,v 1.26 1996/04/01 17:30:15 christos Exp $ */ /* @@ -290,13 +291,13 @@ bwtwoattach(parent, self, args) #if defined(SUN4) if (CPU_ISSUN4) { struct eeprom *eep = (struct eeprom *)eeprom_va; - int constype = (fb->fb_flags & FB_PFOUR) ? EE_CONS_P4OPT : - EE_CONS_BW; + int constype = (fb->fb_flags & FB_PFOUR) ? EED_CONS_P4 : + EED_CONS_BW; /* * Assume this is the console if there's no eeprom info * to be found. */ - if (eep == NULL || eep->eeConsole == constype) + if (eep == NULL || eep->ee_diag.eed_console == constype) isconsole = (fbconstty != NULL); else isconsole = 0; diff --git a/sys/arch/sparc/dev/cgeight.c b/sys/arch/sparc/dev/cgeight.c index aea11563608..b720a24744a 100644 --- a/sys/arch/sparc/dev/cgeight.c +++ b/sys/arch/sparc/dev/cgeight.c @@ -1,3 +1,4 @@ +/* $OpenBSD: cgeight.c,v 1.7 1996/08/13 08:05:20 downsj Exp $ */ /* $NetBSD: cgeight.c,v 1.7 1996/04/01 17:29:57 christos Exp $ */ /* @@ -224,7 +225,7 @@ cgeightattach(parent, self, args) * Assume this is the console if there's no eeprom info * to be found. */ - if (eep == NULL || eep->eeConsole == EE_CONS_P4OPT) + if (eep == NULL || eep->ee_diag.eed_console == EED_CONS_P4) isconsole = (fbconstty != NULL); } diff --git a/sys/arch/sparc/dev/cgfour.c b/sys/arch/sparc/dev/cgfour.c index d5dde467a9c..279d1cb0fea 100644 --- a/sys/arch/sparc/dev/cgfour.c +++ b/sys/arch/sparc/dev/cgfour.c @@ -1,3 +1,4 @@ +/* $OpenBSD: cgfour.c,v 1.7 1996/08/13 08:05:21 downsj Exp $ */ /* $NetBSD: cgfour.c,v 1.7 1996/04/01 17:29:58 christos Exp $ */ /* @@ -228,7 +229,7 @@ cgfourattach(parent, self, args) * Assume this is the console if there's no eeprom info * to be found. */ - if (eep == NULL || eep->eeConsole == EE_CONS_P4OPT) + if (eep == NULL || eep->ee_diag.eed_console == EED_CONS_P4) isconsole = (fbconstty != NULL); } diff --git a/sys/arch/sparc/dev/cgsix.c b/sys/arch/sparc/dev/cgsix.c index 259024c7da6..dd967ebf558 100644 --- a/sys/arch/sparc/dev/cgsix.c +++ b/sys/arch/sparc/dev/cgsix.c @@ -1,3 +1,4 @@ +/* $OpenBSD: cgsix.c,v 1.7 1996/08/13 08:05:22 downsj Exp $ */ /* $NetBSD: cgsix.c,v 1.25 1996/04/01 17:30:00 christos Exp $ */ /* @@ -291,13 +292,13 @@ cgsixattach(parent, self, args) #if defined(SUN4) if (CPU_ISSUN4) { struct eeprom *eep = (struct eeprom *)eeprom_va; - int constype = (fb->fb_flags & FB_PFOUR) ? EE_CONS_P4OPT : - EE_CONS_COLOR; + int constype = (fb->fb_flags & FB_PFOUR) ? EED_CONS_P4 : + EED_CONS_COLOR; /* * Assume this is the console if there's no eeprom info * to be found. */ - if (eep == NULL || eep->eeConsole == constype) + if (eep == NULL || eep->ee_diag.eed_console == constype) isconsole = (fbconstty != NULL); else isconsole = 0; diff --git a/sys/arch/sparc/dev/cgtwo.c b/sys/arch/sparc/dev/cgtwo.c index 243c7cde111..8c5dcc8f11a 100644 --- a/sys/arch/sparc/dev/cgtwo.c +++ b/sys/arch/sparc/dev/cgtwo.c @@ -1,3 +1,4 @@ +/* $OpenBSD: cgtwo.c,v 1.10 1996/08/13 08:05:23 downsj Exp $ */ /* $NetBSD: cgtwo.c,v 1.16 1996/05/18 12:19:14 mrg Exp $ */ /* @@ -206,7 +207,7 @@ cgtwoattach(parent, self, args) * Assume this is the console if there's no eeprom info * to be found. */ - if (eep == NULL || eep->eeConsole == EE_CONS_COLOR) + if (eep == NULL || eep->ee_diag.eed_console == EED_CONS_COLOR) isconsole = (fbconstty != NULL); else isconsole = 0; diff --git a/sys/arch/sparc/dev/cons.c b/sys/arch/sparc/dev/cons.c index 08df311233b..11a1606bae8 100644 --- a/sys/arch/sparc/dev/cons.c +++ b/sys/arch/sparc/dev/cons.c @@ -1,3 +1,4 @@ +/* $OpenBSD: cons.c,v 1.5 1996/08/13 08:05:24 downsj Exp $ */ /* $NetBSD: cons.c,v 1.23.4.1 1996/06/02 09:07:53 mrg Exp $ */ /* @@ -309,8 +310,8 @@ cnopen(dev, flag, mode, p) struct eeprom *ep = (struct eeprom *)eeprom_va; if (ep) { - rows = (u_short)ep->eeTtyRows; - cols = (u_short)ep->eeTtyCols; + rows = (u_short)ep->ee_diag.eed_rowsize; + cols = (u_short)ep->ee_diag.eed_colsize; } } firstopen = 0; diff --git a/sys/arch/sparc/dev/fb.c b/sys/arch/sparc/dev/fb.c index 836bc7dbdad..37bf3b10be7 100644 --- a/sys/arch/sparc/dev/fb.c +++ b/sys/arch/sparc/dev/fb.c @@ -1,3 +1,4 @@ +/* $OpenBSD: fb.c,v 1.9 1996/08/13 08:05:25 downsj Exp $ */ /* $NetBSD: fb.c,v 1.18 1996/04/01 17:29:54 christos Exp $ */ /* @@ -298,23 +299,23 @@ fb_setsize(fb, depth, def_width, def_height, node, bustype) break; } } else if (eep != NULL) { - switch (eep->eeScreenSize) { - case EE_SCR_1152X900: + switch (eep->ee_diag.eed_scrsize) { + case EED_SCR_1152X900: fb->fb_type.fb_width = 1152; fb->fb_type.fb_height = 900; break; - case EE_SCR_1024X1024: + case EED_SCR_1024X1024: fb->fb_type.fb_width = 1024; fb->fb_type.fb_height = 1024; break; - case EE_SCR_1600X1280: + case EED_SCR_1600X1280: fb->fb_type.fb_width = 1600; fb->fb_type.fb_height = 1280; break; - case EE_SCR_1440X1440: + case EED_SCR_1440X1440: fb->fb_type.fb_width = 1440; fb->fb_type.fb_height = 1440; break; @@ -412,8 +413,8 @@ fbrcons_init(fb) rc->rc_maxcol = 80; rc->rc_maxrow = 34; } else { - rc->rc_maxcol = eep->eeTtyCols; - rc->rc_maxrow = eep->eeTtyRows; + rc->rc_maxcol = eep->ee_diag.eed_colsize; + rc->rc_maxrow = eep->ee_diag.eed_rowsize; } } #endif /* SUN4 */ diff --git a/sys/arch/sparc/include/eeprom.h b/sys/arch/sparc/include/eeprom.h index 902153d3f04..e8237a56a08 100644 --- a/sys/arch/sparc/include/eeprom.h +++ b/sys/arch/sparc/include/eeprom.h @@ -1,7 +1,7 @@ -/* $NetBSD: eeprom.h,v 1.2 1995/08/29 22:11:58 pk Exp $ */ +/* $OpenBSD: eeprom.h,v 1.5 1996/08/13 08:05:27 downsj Exp $ */ /* - * Copyright (c) 1994 Gordon W. Ross + * Copyright (c) 1995 Theo de Raadt * All rights reserved. * * Redistribution and use in source and binary forms, with or without @@ -12,7 +12,10 @@ * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. - * 3. The name of the author may not be used to endorse or promote products + * 3. All advertising materials mentioning features or use of this software + * must display the following acknowledgement: + * This product includes software developed by Theo de Raadt. + * 4. The name of the author may not be used to endorse or promote products * derived from this software without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR @@ -28,156 +31,325 @@ */ /* - * Structure/definitions for the Sun3/Sun4 EEPROM. + * This structure defines the contents of the EEPROM for all Sun + * Workstations with the SunMon monitor. * - * This information is published in the Sun document: - * "PROM User's Manual", part number 800-1736010. + * The EEPROM is divided into a diagnostic section, a reserved section, + * a ROM section, and a software section (defined in detail elsewhere). */ - /* * Note that most places where the PROM stores a "true/false" flag, * the true value is 0x12 and false is the usual zero. Such flags * all take the values EE_TRUE or EE_FALSE so this file does not * need to define so many value macros. */ -#define EE_TRUE 0x12 -#define EE_FALSE 0 +#define EE_TRUE 0x12 +#define EE_FALSE 0x00 + +struct ee_keymap { + u_char keymap[128]; /* PROM/EEPROM are 7 bit */ +}; + +#define PW_SIZE 8 /* max size of a password entry */ + +struct password_inf { + u_short bad_counter; /* illegal password count */ + char pw_mode; /* mode */ + char pw_bytes[PW_SIZE]; /* password */ +}; +#define NON_SECURE_MODE 0x00 /* non-secure */ +#define COMMAND_SECURE_MODE 0x01 /* command secure */ +#define FULLY_SECURE_MODE 0x5e /* fully secure */ + /* 0, 2-0x5d, 0x5f-0xff: non secure*/ + + +#define MAX_SLOTS 12 +#define CONFIG_SIZE 16 /* bytes of config data for each slot */ struct eeprom { + struct ee_diag { + u_int eed_test; /* 0x000: diagnostic test write area */ + u_short eed_wrcnt[3]; /* 0x004: diag area write count (3 copies) */ + short eed_nu1; + + u_char eed_chksum[3]; /* 0x00c: diag area checksum (3 copies) */ + char eed_nu2; + time_t eed_hwupdate; /* 0x010: date of last hardware update */ + + char eed_memsize; /* 0x014: MB's of memory in system */ + char eed_memtest; /* 0x015: MB's of memory to test */ + + char eed_scrsize; /* 0x016: screen size */ +#define EED_SCR_1152X900 0x00 +#define EED_SCR_1024X1024 0x12 +#define EED_SCR_1600X1280 0x13 +#define EED_SCR_1440X1440 0x14 +#define EED_SCR_640X480 0x15 +#define EED_SCR_1280X1024 0x16 + + char eed_dogaction; /* 0x017: watchdog reset action */ +#define EED_DOG_MONITOR 0x00 /* return to monitor command level */ +#define EED_DOG_REBOOT 0x12 /* perform power on reset and reboot */ + + char eed_defboot; /* 0x018: default boot? */ +#define EED_DEFBOOT 0x00 /* do default boot */ +#define EED_NODEFBOOT 0x12 /* don't do default boot */ + + char eed_bootdev[2]; /* 0x019: boot device name (e.g. xy, ie) */ + + u_char eed_bootctrl; /* 0x01b: controller number */ + u_char eed_bootunit; /* 0x01c: unit number */ + u_char eed_bootpart; /* 0x01d: partition number */ + + char eed_kbdtype; /* 0x01f: non-Sun keyboard type - for OEM's */ +#define EED_KBD_SUN 0 /* one of the Sun keyboards */ + + char eed_console; /* 0x01f: console device */ +#define EED_CONS_BW 0x00 /* use b&w monitor */ +#define EED_CONS_TTYA 0x10 /* use tty A port */ +#define EED_CONS_TTYB 0x11 /* use tty B port */ +#define EED_CONS_COLOR 0x12 /* use color monitor */ +#define EED_CONS_P4 0x20 /* use the P4 monitor */ + + char eed_showlogo; /* 0x020: display Sun logo? */ +#define EED_LOGO 0x00 +#define EED_NOLOGO 0x12 + + char eed_keyclick; /* 0x021: keyboard click? */ +#define EED_NOKEYCLICK 0x00 +#define EED_KEYCLICK 0x12 + + char eed_diagdev[2]; /* 0x022: boot device name (e.g. xy, ie) */ + u_char eed_diagctrl; /* 0x024: controller number */ + u_char eed_diagunit; /* 0x025: unit number */ + u_char eed_diagpart; /* 0x026: partition number */ +#define EED_WOB 0x12 /* bring system up white on black */ + + u_char eed_videobg; + char eed_diagpath[40]; /* 0x028: boot path of diagnostic */ +#define EED_TERM_34x80 00 +#define EED_TERM_48x120 0x12 /* for large scrn size 1600x1280 */ + char eed_colsize; /* 0x050: number of columns */ + char eed_rowsize; /* 0x051: number of rows */ + + char eed_nu5[6]; + + struct eed_tty_def { /* 0x058: tty port defaults */ + char eet_sel_baud; /* user specifies baud rate */ +#define EET_DEFBAUD 0x00 +#define EET_SELBAUD 0x12 + u_char eet_hi_baud; /* upper byte of baud rate */ + u_char eet_lo_baud; /* lower byte of baud rate */ + u_char eet_rtsdtr; /* flag for dtr and rts */ +#define NO_RTSDTR 0x12 + char eet_unused[4]; + } eed_ttya_def, eed_ttyb_def; + + char eed_banner[80]; /* 0x068: replacement banner */ + /* last two chars must be \r\n (XXX - why not \0?) */ + + u_short eed_pattern; /* 0x0b8: test pattern - must contain 0xAA55 */ + short eed_nu6; + struct eed_conf { /* 0x0bc: system configuration, by slot */ + union { + struct eec_gen { + u_char eec_type; /* board type code */ + char eec_size[CONFIG_SIZE - 1]; + } eec_gen; + + char conf_byte[CONFIG_SIZE]; + u_char eec_type; /* type of this board */ +#define EEC_TYPE_NONE 0 /* no board this slot */ +#define EEC_TYPE_CPU 0x01 /* cpu */ + struct eec_cpu { + u_char eec_type; /* board type */ + u_char eec_cpu_memsize; /* MB's on cpu */ + int eec_cpu_unused:6; + int eec_cpu_dcp:1; /* dcp? */ + int eec_cpu_68881:1; /* 68881? */ + u_char eec_cpu_cachesize; /* KB's cache */ + } eec_cpu; + struct eec_cpu_alt { + u_char eec_type; /* board type */ + u_char memsize; /* MB's on cpu */ + u_char option; /* option flags */ +#define CPU_HAS_DCP 0x02 +#define CPU_HAS_68881 0x01 + u_char cachesize; /* KB's in cache */ + } eec_cpu_alt; - /* 0x00 */ - u_char eeTestArea[4]; /* Factory Defined */ - u_short eeWriteCount[4]; /* || || */ - u_char eeChecksum[4]; /* || || */ - time_t eeLastHwUpdate; /* || || */ - - /* 0x14 */ - u_char eeInstalledMem; /* Megabytes */ - u_char eeMemTestSize; /* || */ - - /* 0x16 */ - u_char eeScreenSize; -#define EE_SCR_1152X900 0x00 -#define EE_SCR_1024X1024 0x12 -#define EE_SCR_1600X1280 0x13 -#define EE_SCR_1440X1440 0x14 - - u_char eeWatchDogDoesReset; /* Watchdog timeout action: - * true: reset/reboot - * false: return to monitor - */ - /* 0x18 */ - u_char eeBootDevStored; /* Is the boot device stored: - * true: use stored device spec. - * false: use default (try all) - */ - /* Stored boot device spec. i.e.: "sd(Ctlr,Unit,Part)" */ - u_char eeBootDevName[2]; /* xy,xd,sd,ie,le,st,xt,mt,... */ - u_char eeBootDevCtlr; - u_char eeBootDevUnit; - u_char eeBootDevPart; - - /* 0x1E */ - u_char eeKeyboardType; /* zero for sun keyboards */ - u_char eeConsole; /* What to use for the console */ -#define EE_CONS_BW 0x00 /* - On-board B&W / keyboard */ -#define EE_CONS_TTYA 0x10 /* - serial port A */ -#define EE_CONS_TTYB 0x11 /* - serial port B */ -#define EE_CONS_COLOR 0x12 /* - Color FB / keyboard */ -#define EE_CONS_P4OPT 0x20 /* - Option board on P4 */ - - /* 0x20 */ - u_char eeCustomBanner; /* Is there a custom banner: - * true: use text at 0x68 - * false: use Sun banner - */ - - u_char eeKeyClick; /* true/false */ - - /* Boot device with "Diag" switch in Diagnostic mode: */ - u_char eeDiagDevName[2]; - u_char eeDiagDevCtlr; - u_char eeDiagDevUnit; - u_char eeDiagDevPart; - - /* Video white-on-black (not implemented) */ - u_char eeWhiteOnBlack; /* true/false */ - - /* 0x28 */ - char eeDiagPath[40]; /* path name of diag program */ - - /* 0x50 */ - u_char eeTtyCols; /* normally 80 */ - u_char eeTtyRows; /* normally 34 */ - u_char ee_x52[6]; /* unused */ - - /* 0x58 */ - /* Default parameters for tty A and tty B: */ - struct eeTtyDef { - u_char eetBaudSet; /* Is the baud rate set? - * true: use values here - * false: use default (9600) - */ - u_char eetBaudHi; /* i.e. 96.. */ - u_char eetBaudLo; /* ..00 */ - u_char eetNoRtsDtr; /* true: disable H/W flow - * false: enable H/W flow */ - u_char eet_pad[4]; - } eeTtyDefA, eeTtyDefB; - - /* 0x68 */ - char eeBannerString[80]; /* see eeCustomBanner above */ - - /* 0xB8 */ - u_short eeTestPattern; /* must be 0xAA55 */ - u_short ee_xBA; /* unused */ - - /* 0xBC */ - /* Configuration data. Hopefully we don't need it. */ - struct eeConf { - u_char eecData[16]; - } eeConf[12+1]; - - /* 0x18c */ - u_char eeAltKeyTable; /* What Key table to use: - * 0x58: EEPROM tables - * else: PROM key tables - */ - u_char eeKeyboardLocale; /* extended keyboard type */ - u_char eeKeyboardID; /* for EEPROM key tables */ - u_char eeCustomLogo; /* true: use eeLogoBitmap */ - - /* 0x190 */ - u_char eeKeymapLC[0x80]; - u_char eeKeymapUC[0x80]; - - /* 0x290 */ - u_char eeLogoBitmap[64][8]; /* 64x64 bit custom logo */ - - /* 0x490 */ - u_char ee_x490[0x500-0x490]; /* unused */ - - /* Other stuff we don't care about... */ - /* 0x500 */ - u_char eeReserved[0x100]; - /* 0x600 */ - u_char eeROM_Area[0x100]; - /* 0x700 */ - u_char eeUnixArea[0x100]; +#define EEC_TYPE_MEM 0x02 /* memory board */ + struct eec_mem { + u_char eec_type; /* board type */ + u_char eec_mem_size; /* MB's on card */ + } eec_mem; + +#define EEC_TYPE_COLOR 0x03 /* color frame buffer */ + struct eec_color { + u_char eec_type; /* board type */ + char eec_color_type; +#define EEC_COLOR_TYPE_CG2 2 /* cg2 color board */ +#define EEC_COLOR_TYPE_CG3 3 /* cg3 color board */ +#define EEC_COLOR_TYPE_CG5 5 /* cg5 color board */ + } eec_color; + +#define EEC_TYPE_BW 0x04 /* b&w frame buffer */ + +#define EEC_TYPE_FPA 0x05 /* floating point accelerator */ + +#define EEC_TYPE_DISK 0x06 /* SMD disk controller */ + struct eec_disk { + u_char eec_type; /* board type */ + char eec_disk_type; /* controller type */ +#define EEC_DISK_TYPE_X450 1 +#define EEC_DISK_TYPE_X451 2 + char eec_disk_ctlr; /* controller number */ + char eec_disk_disks; /* number of disks */ + char eec_disk_cap[4]; /* capacity */ +#define EEC_DISK_NONE 0 +#define EEC_DISK_130 1 +#define EEC_DISK_280 2 +#define EEC_DISK_380 3 +#define EEC_DISK_575 4 +#define EEC_DISK_900 5 + } eec_disk; + +#define EEC_TYPE_TAPE 0x07 /* 1/2" tape controller */ + struct eec_tape { + u_char eec_type; /* board type */ + char eec_tape_type; /* controller type */ +#define EEC_TAPE_TYPE_XT 1 /* Xylogics 472 */ +#define EEC_TAPE_TYPE_MT 2 /* TapeMaster */ + char eec_tape_ctlr; /* controller number */ + char eec_tape_drives; /* number of drives */ + } eec_tape; + +#define EEC_TYPE_ETHER 0x08 /* Ethernet controller */ + +#define EEC_TYPE_TTY 0x09 /* terminal multiplexer */ + struct eec_tty { + u_char eec_type; /* board type */ + char eec_tty_lines; /* number of lines */ +#define MAX_TTY_LINES 16 + char manufacturer; /* code for maker */ +#define EEC_TTY_UNKNOWN 0 +#define EEC_TTY_SYSTECH 1 +#define EEC_TTY_SUN 2 + } eec_tty; + +#define EEC_TYPE_GP 0x0a /* graphics processor/buffer */ + struct eec_gp { + u_char eec_type; /* board type */ + char eec_gp_type; +#define EEC_GP_TYPE_GPPLUS 1 /* GP+ graphic processor board */ +#define EEC_GP_TYPE_GP2 2 /* GP2 graphic processor board */ + } eec_gp; + +#define EEC_TYPE_DCP 0x0b /* DCP ??? XXX */ + +#define EEC_TYPE_SCSI 0x0c /* SCSI controller */ + struct eec_scsi { + u_char eec_type; /* board type */ + char eec_scsi_type; /* host adaptor type */ +#define EEC_SCSI_SUN2 2 +#define EEC_SCSI_SUN3 3 + char eec_scsi_tapes; /* number of tapes */ + char eec_scsi_disks; /* number of disks */ + char eec_scsi_tape_type; +#define EEC_SCSI_SYSG 1 +#define EEC_SCSI_MT02 2 + char eec_scsi_disk_type; +#define EEC_SCSI_MD21 1 +#define EEC_SCSI_ADAPT 2 + char eec_scsi_driv_code[2]; +#define EEC_SCSI_D71 1 +#define EEC_SCSI_D141 2 +#define EEC_SCSI_D327 3 + } eec_scsi; +#define EEC_TYPE_IPC 0x0d + +#define EEC_TYPE_GB 0x0e + +#define EEC_TYPE_SCSI375 0x0f + +#define EEC_TYPE_MAPKIT 0x10 + struct eec_mapkit { + u_char eec_type; /* board type */ + char eec_mapkit_hw; /* whether INI */ +#define EEC_TYPE_MAPKIT_INI 1 + } eec_mapkit; + +#define EEC_TYPE_CHANNEL 0x11 +#define EEC_TYPE_ALM2 0x12 + + + struct eec_generic_net { +#define EEC_TYPE_GENERIC_NET 0x13 + u_char eec_devtype; /* board type */ + u_char eec_mem_type; /* Memory type */ + u_char gn_nu1; + u_char gn_nu2; +#define ID_VME 0x0 /* Data buffers are in VME space(Shared) */ +#define ID_DVMA 0x1 /* or DVMA buffer memory type */ + char *dev_reg_ptr; + } eec_generic_net; + + +#define EEC_TYPE_END 0xff /* end of card cage */ + } eec_un; + } eed_conf[MAX_SLOTS + 1]; +#define EEPROM_TABLE 0x58 /* 1 indicates alternate key table. */ + u_char which_kbt; /* 0x18C: which keytable? */ + + /* + * Note. The following contains the full keyboard id + * returned by the type4 transmit layout command. It is not + * necessarily anything to do with locale of operation. + */ + u_char ee_kb_type; + u_char ee_kb_id; /* 0x18E: keyboard id in case of EEPROM table */ +#define EEPROM_LOGO 0x12 + u_char otherlogo; /* 0x18F: True if eeprom logo needed */ + struct ee_keymap ee_keytab_lc[1]; /* 0x190: */ + struct ee_keymap ee_keytab_uc[1]; /* 0x210: */ + u_char ee_logo[64][8]; /* 0x290: A 64X64 bit space for custom/OEM designed logo icon */ + struct password_inf ee_password_inf; /* 0x490: reserved */ + char eed_resv[0x500 - 0x49c]; /* 0x49c: reserved */ + } ee_diag; + + struct ee_resv { /* reserved area of EEPROM */ + u_short eev_wrcnt[3]; /* 0x500: write count (3 copies) */ + short eev_nu1; + u_char eev_chksum[3]; /* 0x508: reserved area checksum (3 copies) */ + char eev_nu2; + char eev_resv[0x600 - 0x50c]; /* 0x50c: */ + } ee_resv; + + struct ee_rom { /* ROM area of EEPROM */ + u_short eer_wrcnt[3]; /* 0x600: write count (3 copies) */ + short eer_nu1; + u_char eer_chksum[3]; /* 0x608: ROM area checksum (3 copies) */ + char eer_nu2; + char eer_resv[0x700 - 0x60c]; /* 0x60c: */ + } ee_rom; + + /* + * The following area is reserved for software (i.e. UNIX). + * The actual contents of this area are defined elsewhere. + */ + struct ee_softresv { /* software area of EEPROM */ + u_short ees_wrcnt[3]; /* 0x700: write count (3 copies) */ + short ees_nu1; + u_char ees_chksum[3]; /* 0x708: software area checksum (3 copies) */ + char ees_nu2; + char ees_resv[0x800 - 0x70c]; /* 0x70c: */ + } ee_soft; }; -/* - * The size of the eeprom on machines with the old clock is 2k. However, - * on machines with the new clock (and the `eeprom' in the nvram area) - * there are only 2040 bytes available. (???). Since we really only - * care about the `diagnostic' area, we'll use it's size when dealing - * with the eeprom in general. - */ -#define EEPROM_SIZE 0x500 +#define EEPROM_BASE 0xffd04000 -#ifdef _KERNEL +#ifdef _KERNEL extern char *eeprom_va; int eeprom_uio __P((struct uio *)); -#endif /* _KERNEL */ - +#endif /* _KERNEL */ |