diff options
Diffstat (limited to 'sys')
| -rw-r--r-- | sys/arch/amiga/conf/RAMDISK | 241 | ||||
| -rw-r--r-- | sys/arch/amiga/conf/files.amiga | 8 |
2 files changed, 248 insertions, 1 deletions
diff --git a/sys/arch/amiga/conf/RAMDISK b/sys/arch/amiga/conf/RAMDISK new file mode 100644 index 00000000000..9ef9b2967bf --- /dev/null +++ b/sys/arch/amiga/conf/RAMDISK @@ -0,0 +1,241 @@ +# $OpenBSD: RAMDISK,v 1.1 1997/05/13 16:07:23 niklas Exp $ + +# +# A ramdisk kernel +# + +include "arch/amiga/conf/std.amiga" +include "conf/GENERIC" + +maxusers 8 + +# +# mainboards to support (in addition to Amiga) +# +option DRACO + +# +# processors this kernel should support +# +option "M68060" # support for 060 +option "M060SP" # ...and MC68060 support package +option "M68040" # support for 040 +option FPSP # MC68040 floating point support +option "M68030" # support for 030 +option "M68020" # support for 020/851 +option FPCOPROC # Support for MC6888[12] (Required) + +# +# File systems +# +option ADOSFS # AmigaDOS file system + +# +# Compatability options for various existing systems +# +option COMPAT_SUNOS # Support to run Sun (m68k) executables +#option COMPAT_HPUX # HP300 compatability + +# +# Support for various kernel options +# + +option "NKMEMCLUSTERS=256" # Size of kernel malloc area + +# +# Misc. debuging options +# +#option DEBUG # Add debugging statements +#option SYSCALL_DEBUG # debug all syscalls. +#option SCSIDEBUG # Add SCSI debugging statements +#option PANICBUTTON # Forced crash via keypress (???) + +# +# Amiga specific options +# +option MACHINE_NONCONTIG # Non-contiguous memory support +# ATTENTION: There is NO WARRANTY AT ALL that the sync will be complete +# before the 10 secondinterval ends, or that KBDRESET does work at all. +#option KBDRESET # sync on Ctrl-Amiga-Amiga + +# These options improve performance with the built-in serial port +# on slower Amigas. Try the larger buffers first then lev6_defer. +#option "SERIBUF_SIZE=4096" +#option "SEROBUF_SIZE=32" +#option LEV6_DEFER # defers l6 to l4 (below serial l5) +option IPL_REMAP_1 # use remapping interruptsystem version 1 +#option IPL_REMAP_2 # and version 2 (not yet done) + +option RETINACONSOLE # enable code to allow retina to be console +option ULOWELLCONSOLE # enable code to allow a2410 to be console +option CL5426CONSOLE # Cirrus console +option CV64CONSOLE # CyberVision console +option TSENGCONSOLE # Tseng console + +option GRF_ECS # Enhanced Chip Set +option GRF_NTSC # NTSC +option GRF_PAL # PAL +option "GRF_A2024" # Support for the A2024 +option GRF_AGA # AGA Chip Set +#option "KFONT_8X11" # 8x11 font + +# This is how you would tell the kernel the A2410 oscillator frequencies: +# The used frequencies are the defaults, and don't need option setting +#option "ULOWELL_OSC1=36000000" +#option "ULOWELL_OSC2=66667000" + +# This is how you specify the blitting speed, higher values may speed up blits +# a little bit. If you raise this value too much some trash may appear. +# the commented version is the default. +#option RH_MEMCLK 61000000 +# this option enables the 64 bit sprite which doesn't seems to be work +# for quite a few people. E.g. The cursor sprite will turn to a block +# when moved to the top of the screen in X. +#option RH_64BIT_SPRITE +# enables fast scroll code appears to now work on 040 systems. +#option RETINA_SPEED_HACK +# enables the Hardwarecursor which does not work on some systems. +#option RH_HARDWARECURSOR + +# Options for the ramdisk. +option MINIROOTSIZE=4096 +option RAMDISK_HOOKS + +config bsd root rd0 swap rd0 + +grfcc0 at mainbus0 # custom chips +grfrt0 at zbus0 # retina II +grfrh0 at zbus0 # retina III +grfcl* at zbus0 # Picasso II/Piccalo/Spectrum +grful0 at zbus0 # A2410 +grfcv0 at zbus0 # CyberVision 64 +grfet* at zbus0 # Tseng (oMniBus, Domino, Merlin) + +grf0 at grfcc0 +grf1 at grfrt0 +grf2 at grfrh0 +grf3 at grfcl? +grf4 at grful0 +grf5 at grfcv0 +grf6 at grfet? + +ite0 at grf0 # terminal emulators for grf's +ite1 at grf1 # terminal emulators for grf's +ite2 at grf2 # terminal emulators for grf's +ite3 at grf3 # terminal emulators for grf's +ite4 at grf4 # terminal emulators for grf's +ite5 at grf5 # terminal emulators for grf's +ite6 at grf6 # terminal emulators for grf's + +msc0 at zbus0 # A2232 MSC multiport serial. +mfc0 at zbus0 # MultiFaceCard I/O board +mfcs0 at mfc0 unit 0 # MFC serial +mfcs1 at mfc0 unit 1 # MFC serial +#mfcp0 at mfc0 unit 0 # MFC parallel [not available yet] +#mfc1 at zbus0 # MultiFaceCard 2nd I/O board +#mfcs2 at mfc1 unit 0 +#mfcs3 at mfc1 unit 1 +#mfcp1 at mfc1 unit 0 + +le0 at zbus0 # Lance ethernet. +ed0 at zbus0 # dp8390 ethernet +es0 at zbus0 # SMC 91C90 ethernet +qn0 at zbus0 # quicknet ethernet +ae0 at zbus0 # Ariadne ethernet +bah0 at zbus0 # C= arcnet + + +# scsi stuff, all possible +gvpbus* at zbus0 +gtsc0 at gvpbus? # GVP series II scsi +ahsc0 at mainbus0 # A3000 scsi +atzsc0 at zbus0 # A2091 scsi +wstsc0 at zbus0 # Wordsync II scsi +ivsc0 at zbus0 # IVS scsi +mlhsc0 at zbus0 # Hacker scsi +otgsc0 at zbus0 # 12 gauge scsi +zssc0 at zbus0 # Zeus scsi +mgnsc0 at zbus0 # Magnum scsi +wesc0 at zbus0 # Warp Engine scsi +idesc0 at mainbus0 # A4000 & A1200 IDE +afsc0 at zbus0 # A4091 scsi +aftsc0 at mainbus0 # A4000T scsi +flsc0 at zbus0 # FastlaneZ3 scsi +bzsc0 at zbus0 # Blizzard 1230 I,II scsi +bztzsc0 at zbus0 # Blizzard 2060 scsi +empsc0 at zbus0 # Emplant scsi +drsc0 at mainbus0 # DraCo scsi + +scsibus* at gtsc0 +scsibus* at ahsc0 +scsibus* at atzsc0 +scsibus* at wstsc0 +scsibus* at ivsc0 +scsibus* at mlhsc0 +scsibus* at otgsc0 +scsibus* at zssc0 +scsibus* at mgnsc0 +scsibus* at wesc0 +scsibus* at idesc0 +scsibus* at afsc0 +scsibus* at aftsc0 +scsibus* at flsc0 +scsibus* at bzsc0 +scsibus* at bztzsc0 +scsibus* at empsc0 +scsibus* at drsc0 + +# each hard drive from low target to high +# will configure to the next available sd unit number +sd* at scsibus? target ? lun ? # scsi disks +st* at scsibus? target ? lun ? # scsi tapes +cd* at scsibus? target ? lun ? # scsi cd's +ss* at scsibus? target ? lun ? # scsi scanners +ch* at scsibus? target ? lun ? # scsi autochangers +uk* at scsibus? target ? lun ? # scsi unknown + +ggbus* at zbus0 # Goldengate bridge +isa* at ggbus? + +cross* at zbus0 # CrossLink bridge +isa* at cross? + +#isapnp0 at isa? + +com0 at isa? port 0x3f8 irq 4 # Standard PC serial ports +com1 at isa? port 0x2f8 irq 3 +com2 at isa? port 0x3e8 irq 5 +#com3 at isa? port 0x2e8 irq 9 # (conflicts with some video cards) +com4 at isa? port 0x0f0 irq 11 # Crosslink builtin ports +com5 at isa? port 0x0f8 irq 10 +ast0 at isa? port 0x1a0 irq 3 # AST 4-port serial cards +com* at ast? slave ? +boca0 at isa? port 0x100 irq 5 # BOCA 8-port serial cards +com* at boca? slave ? +rtfps0 at isa? port 0x1230 irq 10 # RT 4-port serial cards +com* at rtfps? slave ? +# option for using CD1400 handshaking for incoming data +# requires a special cable that exchanges the RTS and DTR lines +# options CY_HW_RTS +# cy0 at isa? iomem 0xd4000 irq 12 # ISA cyclom card + +lpt0 at isa? port 0x378 irq 7 # Standard PC parallel ports +lpt1 at isa? port 0x278 +lpt2 at isa? port 0x3bc + +wdc0 at isa? port 0x1f0 irq 14 # ST506, ESDI, and IDE controllers +#wdc1 at isa? port 0x170 irq ? +wd* at wdc? drive ? + +atapibus* at wdc? +acd* at atapibus? drive ? + +# XXX should be ed but clashes with Zorro ed device +isaed0 at isa? port 0x280 iomem 0xd0000 irq 9 # WD/SMC, 3C503, and NE[12]000 +isaed1 at isa? port 0x250 iomem 0xd8000 irq 9 # ethernet cards +isaed2 at isa? port 0x300 iomem 0xcc000 irq 10 + +fd* at fdc0 unit ? + +pseudo-device view 10 # views +pseudo-device rd 2 # ramdisk diff --git a/sys/arch/amiga/conf/files.amiga b/sys/arch/amiga/conf/files.amiga index 1a168f4ffc7..80995864d7c 100644 --- a/sys/arch/amiga/conf/files.amiga +++ b/sys/arch/amiga/conf/files.amiga @@ -1,4 +1,4 @@ -# $OpenBSD: files.amiga,v 1.20 1997/03/26 18:25:37 niklas Exp $ +# $OpenBSD: files.amiga,v 1.21 1997/05/13 16:07:23 niklas Exp $ # $NetBSD: files.amiga,v 1.51 1996/12/16 16:17:31 is Exp $ # maxpartitions must be first item in files.${ARCH} @@ -72,6 +72,11 @@ attach grfcc at mainbus file arch/amiga/dev/grf_cc.c grfcc needs-flag file arch/amiga/dev/ite_cc.c grfcc & ite +# RAM disk +pseudo-device rd +file dev/ramdisk.c rd needs-flag +file arch/amiga/dev/rd_root.c ramdisk_hooks + pseudo-device view file arch/amiga/dev/view.c view | grfcc needs-count file arch/amiga/dev/grfabs.c grfcc | view @@ -331,6 +336,7 @@ major {vnd = 6} major {cd = 7} major {ccd = 8} major {acd = 15} +major {rd = 16} # Compatibility modules |