summaryrefslogtreecommitdiff
path: root/sys
diff options
context:
space:
mode:
Diffstat (limited to 'sys')
-rw-r--r--sys/dev/ic/bwi.c25
1 files changed, 17 insertions, 8 deletions
diff --git a/sys/dev/ic/bwi.c b/sys/dev/ic/bwi.c
index d78b5d3ffaf..b4073d08ebc 100644
--- a/sys/dev/ic/bwi.c
+++ b/sys/dev/ic/bwi.c
@@ -1,4 +1,4 @@
-/* $OpenBSD: bwi.c,v 1.58 2007/10/01 14:37:51 jsg Exp $ */
+/* $OpenBSD: bwi.c,v 1.59 2007/10/01 19:48:10 mglocker Exp $ */
/*
* Copyright (c) 2007 The DragonFly Project. All rights reserved.
@@ -6653,6 +6653,7 @@ int
bwi_newstate(struct ieee80211com *ic, enum ieee80211_state nstate, int arg)
{
struct bwi_softc *sc = ic->ic_if.if_softc;
+ struct ieee80211_node *ni;
int error;
uint8_t chan;
@@ -6677,6 +6678,8 @@ bwi_newstate(struct ieee80211com *ic, enum ieee80211_state nstate, int arg)
} else if (nstate == IEEE80211_S_RUN) {
struct bwi_mac *mac;
+ ni = ic->ic_bss;
+
bwi_set_bssid(sc, ic->ic_bss->ni_bssid);
KKASSERT(sc->sc_cur_regwin->rw_type == BWI_REGWIN_T_MAC);
@@ -6684,6 +6687,17 @@ bwi_newstate(struct ieee80211com *ic, enum ieee80211_state nstate, int arg)
/* Initial TX power calibration */
bwi_mac_calibrate_txpower(mac);
+
+ if (ic->ic_opmode == IEEE80211_M_STA) {
+ /* fake a join to init the tx rate */
+ bwi_newassoc(ic, ni, 1);
+ }
+
+ if (ic->ic_opmode != IEEE80211_M_MONITOR) {
+ /* start automatic rate control timer */
+ if (ic->ic_fixed_rate == -1)
+ timeout_add(&sc->sc_amrr_ch, hz / 2);
+ }
} else
bwi_set_bssid(sc, bwi_zero_addr);
@@ -6696,12 +6710,6 @@ back:
} else if (nstate == IEEE80211_S_RUN) {
/* XXX 15 seconds */
timeout_add(&sc->sc_calib_ch, hz * 15);
-
- if (ic->ic_opmode != IEEE80211_M_MONITOR) {
- /* start automatic rate control timer */
- if (ic->ic_fixed_rate == -1)
- timeout_add(&sc->sc_amrr_ch, hz / 2);
- }
}
return (error);
@@ -6757,7 +6765,8 @@ bwi_newassoc(struct ieee80211com *ic, struct ieee80211_node *ni, int isnew)
/* set rate to some reasonable initial value */
for (i = ni->ni_rates.rs_nrates - 1;
- i > 0 && (ni->ni_rates.rs_rates[i] & IEEE80211_RATE_VAL) > 72; i--);
+ i > 0 && (ni->ni_rates.rs_rates[i] & IEEE80211_RATE_VAL) > 72;
+ i--);
ni->ni_txrate = i;
}