diff options
Diffstat (limited to 'sys')
| -rw-r--r-- | sys/arch/amiga/conf/GENERIC | 196 |
1 files changed, 92 insertions, 104 deletions
diff --git a/sys/arch/amiga/conf/GENERIC b/sys/arch/amiga/conf/GENERIC index 42430a05cb5..46ddbd59bd9 100644 --- a/sys/arch/amiga/conf/GENERIC +++ b/sys/arch/amiga/conf/GENERIC @@ -1,5 +1,5 @@ -# $OpenBSD: GENERIC,v 1.11 1996/05/29 10:14:43 niklas Exp $ -# $NetBSD: GENERIC,v 1.57 1996/05/19 21:04:48 veego Exp $ +# $OpenBSD: GENERIC,v 1.12 1996/08/19 00:16:57 niklas Exp $ +# $NetBSD: GENERIC,v 1.57.4.3 1996/06/04 10:32:59 is Exp $ # # GENERIC AMIGA @@ -8,142 +8,95 @@ # include "std.amiga" +include "../../../conf/GENERIC" maxusers 8 -options TIMEZONE=300, DST=1 # -# processors this kernel should support +# mainboards to support (in addition to Amiga) # -options "M68040" # support for 040 -options FPSP # MC68040 floating point support -options "M68030" # support for 030 -options "M68020" # support for 020/851 -options FPCOPROC # Support for MC6888[12] (Required) - -options SWAPPAGER # Pager for processes (Required) -options VNODEPAGER # Pager for vnodes (Required) -options DEVPAGER # Pager for devices (Required) +option DRACO # -# Networking options +# processors this kernel should support # -options INET # IP networking support (Required) -#options GATEWAY # Packet forwarding -#options DIRECTED_BROADCAST # Broadcast across subnets -#options MROUTING # Multicast routing -#options NS # XNS -#options ISO,TPIP # OSI -#options EON # OSI tunneling over IP -#options CCITT,LLC,HDLC # X.25 -#options PPP_BSDCOMP,PPP_DEFLATE # BSD compression for PPP +option "M68060" # support for 060 +option "M060SP" # ...and MC68060 support package +option "M68040" # support for 040 +option FPSP # MC68040 floating point support +option "M68030" # support for 030 +option "M68020" # support for 020/851 +option FPCOPROC # Support for MC6888[12] (Required) # # File systems # -options FFS # Berkeley fast file system -options QUOTA # UFS quotas -#options LFS # log-structured filesystem -options MFS # Memory based filesystem - -options NFSSERVER # Network File System server side code -options NFSCLIENT # Network File System client side code - -options ADOSFS # AmigaDOS file system -options CD9660 # ISO 9660 + Rock Ridge file system -options MSDOSFS # MS-DOS file system -options FDESC # /dev/fd -options FIFO # FIFOs; RECOMMENDED -options KERNFS # /kern -options NULLFS # loopback file system -#options PORTAL # Portal Filesystem -options PROCFS # /proc -options UMAPFS # NULLFS + uid and gid remapping -options UNION # union file system - +option ADOSFS # AmigaDOS file system # # Compatability options for various existing systems # -options "COMPAT_10" # compatability with older NetBSD release -options "COMPAT_09" # compatability with older NetBSD release -options "COMPAT_43" # 4.3 BSD compatible system calls -options COMPAT_SUNOS # Support to run Sun (m68k) executables -options "TCP_COMPAT_42" # Use 4.2 BSD style TCP -options "COMPAT_NOMID" # allow nonvalid machine id executables -#options COMPAT_HPUX # HP300 compatability - -# -# Support for System V IPC facilities. -# -options SYSVSHM # System V-like shared memory -options SYSVMSG # System V-like messages -options SYSVSEM # System V-like semaphores +option COMPAT_SUNOS # Support to run Sun (m68k) executables +#option COMPAT_HPUX # HP300 compatability # # Support for various kernel options # -options UCONSOLE # anyone can redirect a virtual console -#options INSECURE # allow, among other insecure stuff, LKM - # loading in multi-user mode. - -options GENERIC # Mini-root boot support -options LKM # Loadable kernel modules -options "NKMEMCLUSTERS=256" # Size of kernel malloc area +option GENERIC # Mini-root boot support +option "NKMEMCLUSTERS=256" # Size of kernel malloc area # # Misc. debuging options # -options DDB # Kernel debugger -options DIAGNOSTIC # Add additional error checking code -options KTRACE # Add kernel tracing system call -#options DEBUG # Add debugging statements -#options SYSCALL_DEBUG # debug all syscalls. -#options SCSIDEBUG # Add SCSI debugging statements -#options KGDB # Kernel debugger (KGDB) support -#options PANICBUTTON # Forced crash via keypress (???) +#option DEBUG # Add debugging statements +#option SYSCALL_DEBUG # debug all syscalls. +#option SCSIDEBUG # Add SCSI debugging statements +#option KGDB # Kernel debugger (KGDB) support +#option PANICBUTTON # Forced crash via keypress (???) # # Amiga specific options # -options MACHINE_NONCONTIG # Non-contiguous memory support -#options KBDRESET # sync on Ctrl-Amiga-Amiga +option MACHINE_NONCONTIG # Non-contiguous memory support +#option KBDRESET # sync on Ctrl-Amiga-Amiga # These options improve performance with the built-in serial port # on slower Amigas. Try the larger buffers first then lev6_defer. -#options "SERIBUF_SIZE=4096" -#options "SEROBUF_SIZE=32" -#options LEV6_DEFER # defers l6 to l4 (below serial l5) - -options RETINACONSOLE # enable code to allow retina to be console -options ULOWELLCONSOLE # enable code to allow a2410 to be console -options CL5426CONSOLE # Cirrus console -options CV64CONSOLE # CyberVision console -options TSENGCONSOLE # Tseng console - -options GRF_ECS # Enhanced Chip Set -options GRF_NTSC # NTSC -options GRF_PAL # PAL -options "GRF_A2024" # Support for the A2024 -options GRF_AGA # AGA Chip Set -#options "KFONT_8X11" # 8x11 font +#option "SERIBUF_SIZE=4096" +#option "SEROBUF_SIZE=32" +#option LEV6_DEFER # defers l6 to l4 (below serial l5) +option IPL_REMAP_1 # use remapping interruptsystem version 1 +#option IPL_REMAP_2 # and version 2 (not yet done) + +option RETINACONSOLE # enable code to allow retina to be console +option ULOWELLCONSOLE # enable code to allow a2410 to be console +option CL5426CONSOLE # Cirrus console +option CV64CONSOLE # CyberVision console +option TSENGCONSOLE # Tseng console + +option GRF_ECS # Enhanced Chip Set +option GRF_NTSC # NTSC +option GRF_PAL # PAL +option "GRF_A2024" # Support for the A2024 +option GRF_AGA # AGA Chip Set +#option "KFONT_8X11" # 8x11 font # This is how you would tell the kernel the A2410 oscillator frequencies: # The used frequencies are the defaults, and don't need option setting -#options "ULOWELL_OSC1=36000000" -#options "ULOWELL_OSC2=66667000" +#option "ULOWELL_OSC1=36000000" +#option "ULOWELL_OSC2=66667000" # This is how you specify the blitting speed, higher values may speed up blits # a littel bit. If you raise this value too much some trash may appear. # the commented version is the default. -#options RH_MEMCLK 61000000 +#option RH_MEMCLK 61000000 # this option enables the 64 bit sprite which doesn't seems to be work # for quite a few people. E.g. The cursor sprite will turn to a block # when moved to the top of the screen in X. -#options RH_64BIT_SPRITE +#option RH_64BIT_SPRITE # enables fast scroll code appears to now work on 040 systems. -#options RETINA_SPEED_HACK +#option RETINA_SPEED_HACK grfcc0 at mainbus0 # custom chips grfrt0 at zbus0 # retina II @@ -205,6 +158,7 @@ aftsc0 at mainbus0 # A4000T scsi flsc0 at zbus0 # FastlaneZ3 scsi bzsc0 at zbus0 # Blizzard 1230 scsi empsc0 at zbus0 # Emplant +drsc0 at mainbus0 # DraCo scsi scsibus* at gtsc0 scsibus* at ahsc0 @@ -222,6 +176,7 @@ scsibus* at aftsc0 scsibus* at flsc0 scsibus* at bzsc0 scsibus* at empsc0 +scsibus* at drsc0 # each hard drive from low target to high # will configure to the next available sd unit number @@ -232,16 +187,49 @@ ch* at scsibus? target ? lun ? # scsi cd changers ss* at scsibus? target ? lun ? # scsi scanners uk* at scsibus? target ? lun ? # unknown scsi -pseudo-device loop 1 # network loopback -pseudo-device sl 1 # slip -pseudo-device ppp 1 # ppp -#pseudo-device tun 1 # network tunnel line discipline -pseudo-device bpfilter 4 # berkeley packet filters +ggbus* at zbus0 # Goldengate bridge +isa* at ggbus? + +cross* at zbus0 # CrossLink bridge +isa* at cross? + +isapnp0 at isa? + +com0 at isa? port 0x3f8 irq 4 # Standard PC serial ports +com1 at isa? port 0x2f8 irq 3 +com2 at isa? port 0x3e8 irq 5 +#com3 at isa? port 0x2e8 irq 9 # (conflicts with some video cards) +com4 at isa? port 0x0f0 irq 11 # Crosslink builtin ports +com5 at isa? port 0x0f8 irq 10 +ast0 at isa? port 0x1a0 irq 3 # AST 4-port serial cards +com* at ast? slave ? +boca0 at isa? port 0x100 irq 5 # BOCA 8-port serial cards +com* at boca? slave ? +rtfps0 at isa? port 0x1230 irq 10 # RT 4-port serial cards +com* at rtfps? slave ? +# option for using CD1400 handshaking for incoming data +# requires a special cable that exchanges the RTS and DTR lines +# options CY_HW_RTS +cy0 at isa? iomem 0xd4000 irq 12 # ISA cyclom card + +lpt0 at isa? port 0x378 irq 7 # Standard PC parallel ports +lpt1 at isa? port 0x278 +lpt2 at isa? port 0x3bc + +wdc0 at isa? port 0x1f0 irq 14 # ST506, ESDI, and IDE controllers +#wdc1 at isa? port 0x170 irq ? +wd* at wdc? drive ? + +atapibus* at wdc? +acd* at atapibus? drive ? + +# XXX should be ed but clashes with Zorro ed device +isaed0 at isa? port 0x280 iomem 0xd0000 irq 9 # WD/SMC, 3C503, and NE[12]000 +isaed1 at isa? port 0x250 iomem 0xd8000 irq 9 # ethernet cards +isaed2 at isa? port 0x300 iomem 0xcc000 irq 10 + +fd* at fdc0 unit ? pseudo-device view 10 # views -pseudo-device pty 16 # pseudo terminals - -pseudo-device vnd 4 # paging to files -#pseudo-device ccd 4 # concatenated disk devices config bsd swap on generic |