diff options
Diffstat (limited to 'sys')
-rw-r--r-- | sys/dev/ic/ar5211.c | 28 | ||||
-rw-r--r-- | sys/dev/ic/ar5212.c | 28 | ||||
-rw-r--r-- | sys/dev/ic/ar5xxx.c | 5 | ||||
-rw-r--r-- | sys/dev/ic/ath.c | 71 | ||||
-rw-r--r-- | sys/dev/ic/athvar.h | 39 |
5 files changed, 79 insertions, 92 deletions
diff --git a/sys/dev/ic/ar5211.c b/sys/dev/ic/ar5211.c index 0adaf5b861b..ff125d7717e 100644 --- a/sys/dev/ic/ar5211.c +++ b/sys/dev/ic/ar5211.c @@ -1,4 +1,4 @@ -/* $OpenBSD: ar5211.c,v 1.1 2005/02/25 22:25:30 reyk Exp $ */ +/* $OpenBSD: ar5211.c,v 1.2 2005/03/03 16:39:54 reyk Exp $ */ /* * Copyright (c) 2004, 2005 Reyk Floeter <reyk@vantronix.net> @@ -832,11 +832,11 @@ ar5k_ar5211_resetTxQueue(hal, queue) */ if (IEEE80211_IS_CHAN_B(channel)) { hal->ah_cw_min = AR5K_TUNE_CWMIN_11B; - hal->ah_cw_max = AR5K_TUNE_CWMAX_11B; + cw_max = hal->ah_cw_max = AR5K_TUNE_CWMAX_11B; hal->ah_aifs = AR5K_TUNE_AIFS_11B; } else { hal->ah_cw_min = AR5K_TUNE_CWMIN; - hal->ah_cw_max = AR5K_TUNE_CWMAX; + cw_max = hal->ah_cw_max = AR5K_TUNE_CWMAX; hal->ah_aifs = AR5K_TUNE_AIFS; } @@ -856,11 +856,11 @@ ar5k_ar5211_resetTxQueue(hal, queue) AR5K_REG_WRITE(AR5K_AR5211_DCU_RETRY_LMT(queue), AR5K_REG_SM(AR5K_INIT_SLG_RETRY, - AR5K_AR5211_DCU_RETRY_LMT_SLG_RETRY) - | AR5K_REG_SM(AR5K_INIT_SSH_RETRY, - AR5K_AR5211_DCU_RETRY_LMT_SSH_RETRY) - | AR5K_REG_SM(retry_lg, AR5K_AR5211_DCU_RETRY_LMT_LG_RETRY) - | AR5K_REG_SM(retry_sh, AR5K_AR5211_DCU_RETRY_LMT_SH_RETRY)); + AR5K_AR5211_DCU_RETRY_LMT_SLG_RETRY) | + AR5K_REG_SM(AR5K_INIT_SSH_RETRY, + AR5K_AR5211_DCU_RETRY_LMT_SSH_RETRY) | + AR5K_REG_SM(retry_lg, AR5K_AR5211_DCU_RETRY_LMT_LG_RETRY) | + AR5K_REG_SM(retry_sh, AR5K_AR5211_DCU_RETRY_LMT_SH_RETRY)); /* * Set initial content window (cw_min/cw_max) @@ -1521,27 +1521,23 @@ ar5k_ar5211_setLedState(hal, state) switch (state) { case IEEE80211_S_SCAN: case IEEE80211_S_AUTH: - led = - AR5K_AR5211_PCICFG_LEDMODE_PROP | + led = AR5K_AR5211_PCICFG_LEDMODE_PROP | AR5K_AR5211_PCICFG_LED_PEND; break; case IEEE80211_S_INIT: - led = - AR5K_AR5211_PCICFG_LEDMODE_PROP | + led = AR5K_AR5211_PCICFG_LEDMODE_PROP | AR5K_AR5211_PCICFG_LED_NONE; break; case IEEE80211_S_ASSOC: case IEEE80211_S_RUN: - led |= - AR5K_AR5211_PCICFG_LEDMODE_PROP | + led = AR5K_AR5211_PCICFG_LEDMODE_PROP | AR5K_AR5211_PCICFG_LED_ASSOC; break; default: - led |= - AR5K_AR5211_PCICFG_LEDMODE_PROM | + led = AR5K_AR5211_PCICFG_LEDMODE_PROM | AR5K_AR5211_PCICFG_LED_NONE; break; } diff --git a/sys/dev/ic/ar5212.c b/sys/dev/ic/ar5212.c index e539b0de8e7..98572919edd 100644 --- a/sys/dev/ic/ar5212.c +++ b/sys/dev/ic/ar5212.c @@ -1,4 +1,4 @@ -/* $OpenBSD: ar5212.c,v 1.3 2005/02/25 22:25:30 reyk Exp $ */ +/* $OpenBSD: ar5212.c,v 1.4 2005/03/03 16:39:54 reyk Exp $ */ /* * Copyright (c) 2004, 2005 Reyk Floeter <reyk@vantronix.net> @@ -930,11 +930,11 @@ ar5k_ar5212_resetTxQueue(hal, queue) */ if (IEEE80211_IS_CHAN_XR(channel)) { hal->ah_cw_min = AR5K_TUNE_CWMIN_XR; - hal->ah_cw_max = AR5K_TUNE_CWMAX_XR; + cw_max = hal->ah_cw_max = AR5K_TUNE_CWMAX_XR; hal->ah_aifs = AR5K_TUNE_AIFS_XR; } else if (IEEE80211_IS_CHAN_B(channel)) { hal->ah_cw_min = AR5K_TUNE_CWMIN_11B; - hal->ah_cw_max = AR5K_TUNE_CWMAX_11B; + cw_max = hal->ah_cw_max = AR5K_TUNE_CWMAX_11B; hal->ah_aifs = AR5K_TUNE_AIFS_11B; } else { hal->ah_cw_min = AR5K_TUNE_CWMIN; @@ -958,11 +958,11 @@ ar5k_ar5212_resetTxQueue(hal, queue) AR5K_REG_WRITE(AR5K_AR5212_DCU_RETRY_LMT(queue), AR5K_REG_SM(AR5K_INIT_SLG_RETRY, - AR5K_AR5212_DCU_RETRY_LMT_SLG_RETRY) - | AR5K_REG_SM(AR5K_INIT_SSH_RETRY, - AR5K_AR5212_DCU_RETRY_LMT_SSH_RETRY) - | AR5K_REG_SM(retry_lg, AR5K_AR5212_DCU_RETRY_LMT_LG_RETRY) - | AR5K_REG_SM(retry_sh, AR5K_AR5212_DCU_RETRY_LMT_SH_RETRY)); + AR5K_AR5212_DCU_RETRY_LMT_SLG_RETRY) | + AR5K_REG_SM(AR5K_INIT_SSH_RETRY, + AR5K_AR5212_DCU_RETRY_LMT_SSH_RETRY) | + AR5K_REG_SM(retry_lg, AR5K_AR5212_DCU_RETRY_LMT_LG_RETRY) | + AR5K_REG_SM(retry_sh, AR5K_AR5212_DCU_RETRY_LMT_SH_RETRY)); /* * Set initial content window (cw_min/cw_max) @@ -1793,27 +1793,23 @@ ar5k_ar5212_setLedState(hal, state) switch (state) { case IEEE80211_S_SCAN: case IEEE80211_S_AUTH: - led = - AR5K_AR5212_PCICFG_LEDMODE_PROP | + led = AR5K_AR5212_PCICFG_LEDMODE_PROP | AR5K_AR5212_PCICFG_LED_PEND; break; case IEEE80211_S_INIT: - led = - AR5K_AR5212_PCICFG_LEDMODE_PROP | + led = AR5K_AR5212_PCICFG_LEDMODE_PROP | AR5K_AR5212_PCICFG_LED_NONE; break; case IEEE80211_S_ASSOC: case IEEE80211_S_RUN: - led |= - AR5K_AR5212_PCICFG_LEDMODE_PROP | + led = AR5K_AR5212_PCICFG_LEDMODE_PROP | AR5K_AR5212_PCICFG_LED_ASSOC; break; default: - led |= - AR5K_AR5212_PCICFG_LEDMODE_PROM | + led = AR5K_AR5212_PCICFG_LEDMODE_PROM | AR5K_AR5212_PCICFG_LED_NONE; break; } diff --git a/sys/dev/ic/ar5xxx.c b/sys/dev/ic/ar5xxx.c index 3d004e34fc6..aa50782c007 100644 --- a/sys/dev/ic/ar5xxx.c +++ b/sys/dev/ic/ar5xxx.c @@ -1,4 +1,4 @@ -/* $OpenBSD: ar5xxx.c,v 1.15 2005/02/25 22:25:30 reyk Exp $ */ +/* $OpenBSD: ar5xxx.c,v 1.16 2005/03/03 16:39:54 reyk Exp $ */ /* * Copyright (c) 2004, 2005 Reyk Floeter <reyk@vantronix.net> @@ -1191,7 +1191,7 @@ ar5k_ar5111_channel(hal, channel) /* * Set the channel on the AR5111 radio */ - data0 = 0; + data0 = data1 = 0; ath_channel = ieee_channel = ath_hal_mhz2ieee(channel->c_channel, channel->c_channel_flags); @@ -1230,6 +1230,7 @@ ar5k_ar5112_channel(hal, channel) u_int32_t data, data0, data1, data2; u_int16_t c; + data = data0 = data1 = data2 = 0; c = channel->c_channel; /* diff --git a/sys/dev/ic/ath.c b/sys/dev/ic/ath.c index 392adae4f10..e5ad4c89d88 100644 --- a/sys/dev/ic/ath.c +++ b/sys/dev/ic/ath.c @@ -1,4 +1,4 @@ -/* $OpenBSD: ath.c,v 1.10 2005/03/03 14:36:38 damien Exp $ */ +/* $OpenBSD: ath.c,v 1.11 2005/03/03 16:39:54 reyk Exp $ */ /* $NetBSD: ath.c,v 1.37 2004/08/18 21:59:39 dyoung Exp $ */ /*- @@ -386,24 +386,17 @@ ath_attach(u_int16_t devid, struct ath_softc *sc) #if NBPFILTER > 0 bpfattach(&sc->sc_drvbpf, ifp, DLT_IEEE802_11_RADIO, - sizeof(struct ieee80211_frame) + 64); + sizeof(struct ieee80211_frame) + IEEE80211_RADIOTAP_HDRLEN); - /* - * Initialize constant fields. - * XXX make header lengths a multiple of 32-bits so subsequent - * headers are properly aligned; this is a kludge to keep - * certain applications happy. - * - * NB: the channel is setup each time we transition to the - * RUN state to avoid filling it in for each frame. - */ - sc->sc_tx_th_len = roundup(sizeof(sc->sc_tx_th), sizeof(u_int32_t)); - sc->sc_tx_th.wt_ihdr.it_len = htole16(sc->sc_tx_th_len); - sc->sc_tx_th.wt_ihdr.it_present = htole32(ATH_TX_RADIOTAP_PRESENT); + sc->sc_rxtap_len = sizeof(sc->sc_rxtapu); + bzero(&sc->sc_rxtapu, sc->sc_rxtap_len); + sc->sc_rxtap.wr_ihdr.it_len = htole16(sc->sc_rxtap_len); + sc->sc_rxtap.wr_ihdr.it_present = htole32(ATH_RX_RADIOTAP_PRESENT); - sc->sc_rx_th_len = roundup(sizeof(sc->sc_rx_th), sizeof(u_int32_t)); - sc->sc_rx_th.wr_ihdr.it_len = htole16(sc->sc_rx_th_len); - sc->sc_rx_th.wr_ihdr.it_present = htole32(ATH_RX_RADIOTAP_PRESENT); + sc->sc_txtap_len = sizeof(sc->sc_txtapu); + bzero(&sc->sc_txtapu, sc->sc_txtap_len); + sc->sc_txtap.wt_ihdr.it_len = htole16(sc->sc_txtap_len); + sc->sc_txtap.wt_ihdr.it_present = htole32(ATH_TX_RADIOTAP_PRESENT); #endif sc->sc_flags |= ATH_ATTACHED; @@ -654,7 +647,6 @@ ath_bmiss_proc(void *arg, int pending) * machine will drop us into scanning after timing * out waiting for a probe response. */ - /* XXX sometimes after association */ ieee80211_new_state(ic, IEEE80211_S_ASSOC, -1); } } @@ -1342,7 +1334,7 @@ ath_beacon_alloc(struct ath_softc *sc, struct ieee80211_node *ni) , m->m_pkthdr.len + IEEE80211_CRC_LEN /* packet length */ , sizeof(struct ieee80211_frame) /* header length */ , HAL_PKT_TYPE_BEACON /* Atheros packet type */ - , 0x20 /* txpower XXX */ + , 60 /* txpower XXX */ , rate, 1 /* series 0 rate/tries */ , HAL_TXKEYIX_INVALID /* no encryption */ , 0 /* antenna mode */ @@ -1973,16 +1965,18 @@ ath_rx_proc(void *arg, int npending) if (sc->sc_drvbpf) { struct mbuf mb; - sc->sc_rx_th.wr_rate = - sc->sc_hwmap[ds->ds_rxstat.rs_rate]; - sc->sc_rx_th.wr_antsignal = ds->ds_rxstat.rs_rssi; - sc->sc_rx_th.wr_antenna = ds->ds_rxstat.rs_antenna; - /* XXX TSF */ + sc->sc_rxtap.wr_rate = + sc->sc_hwmap[ds->ds_rxstat.rs_rate] & + IEEE80211_RATE_VAL; + sc->sc_rxtap.wr_antsignal = ds->ds_rxstat.rs_rssi; + sc->sc_rxtap.wr_antenna = ds->ds_rxstat.rs_antenna; + M_DUP_PKTHDR(&mb, m); - mb.m_data = (caddr_t)&sc->sc_rx_th; - mb.m_len = sc->sc_rx_th_len; + mb.m_data = (caddr_t)&sc->sc_rxtap; + mb.m_len = sc->sc_rxtap_len; mb.m_next = m; mb.m_pkthdr.len += mb.m_len; + bpf_mtap(sc->sc_drvbpf, &mb); } #endif @@ -2337,18 +2331,19 @@ ath_tx_start(struct ath_softc *sc, struct ieee80211_node *ni, if (sc->sc_drvbpf) { struct mbuf mb; - sc->sc_tx_th.wt_flags = 0; + sc->sc_txtap.wt_flags = 0; if (shortPreamble) - sc->sc_tx_th.wt_flags |= IEEE80211_RADIOTAP_F_SHORTPRE; + sc->sc_txtap.wt_flags |= IEEE80211_RADIOTAP_F_SHORTPRE; if (iswep) - sc->sc_tx_th.wt_flags |= IEEE80211_RADIOTAP_F_WEP; - sc->sc_tx_th.wt_rate = ni->ni_rates.rs_rates[ni->ni_txrate]; - sc->sc_tx_th.wt_txpower = 60/2; /* XXX */ - sc->sc_tx_th.wt_antenna = antenna; + sc->sc_txtap.wt_flags |= IEEE80211_RADIOTAP_F_WEP; + sc->sc_txtap.wt_rate = ni->ni_rates.rs_rates[ni->ni_txrate] & + IEEE80211_RATE_VAL; + sc->sc_txtap.wt_txpower = 30; + sc->sc_txtap.wt_antenna = antenna; M_DUP_PKTHDR(&mb, m0); - mb.m_data = (caddr_t)&sc->sc_tx_th; - mb.m_len = sc->sc_tx_th_len; + mb.m_data = (caddr_t)&sc->sc_txtap; + mb.m_len = sc->sc_txtap_len; mb.m_next = m0; mb.m_pkthdr.len += mb.m_len; bpf_mtap(sc->sc_drvbpf, &mb); @@ -2689,10 +2684,10 @@ ath_chan_set(struct ath_softc *sc, struct ieee80211_channel *chan) /* * Update BPF state. */ - sc->sc_tx_th.wt_chan_freq = sc->sc_rx_th.wr_chan_freq = - htole16(chan->ic_freq); - sc->sc_tx_th.wt_chan_flags = sc->sc_rx_th.wr_chan_flags = - htole16(chan->ic_flags); + sc->sc_txtap.wt_chan_freq = sc->sc_rxtap.wr_chan_freq = + htole16(chan->ic_freq); + sc->sc_txtap.wt_chan_flags = sc->sc_rxtap.wr_chan_flags = + htole16(chan->ic_flags); /* * Change channels and update the h/w rate map diff --git a/sys/dev/ic/athvar.h b/sys/dev/ic/athvar.h index bc7d92c84c9..9aa20ce42dd 100644 --- a/sys/dev/ic/athvar.h +++ b/sys/dev/ic/athvar.h @@ -1,4 +1,4 @@ -/* $OpenBSD: athvar.h,v 1.4 2005/02/17 21:02:24 reyk Exp $ */ +/* $OpenBSD: athvar.h,v 1.5 2005/03/03 16:39:54 reyk Exp $ */ /* $NetBSD: athvar.h,v 1.10 2004/08/10 01:03:53 dyoung Exp $ */ /*- @@ -133,13 +133,13 @@ struct ath_stats { struct ath_rx_radiotap_header { struct ieee80211_radiotap_header wr_ihdr; - u_int8_t wr_flags; /* XXX for padding */ + u_int8_t wr_flags; u_int8_t wr_rate; u_int16_t wr_chan_freq; u_int16_t wr_chan_flags; u_int8_t wr_antenna; u_int8_t wr_antsignal; -}; +} __packed; #define ATH_TX_RADIOTAP_PRESENT ( \ (1 << IEEE80211_RADIOTAP_FLAGS) | \ @@ -151,13 +151,13 @@ struct ath_rx_radiotap_header { struct ath_tx_radiotap_header { struct ieee80211_radiotap_header wt_ihdr; - u_int8_t wt_flags; /* XXX for padding */ + u_int8_t wt_flags; u_int8_t wt_rate; u_int16_t wt_chan_freq; u_int16_t wt_chan_flags; u_int8_t wt_txpower; u_int8_t wt_antenna; -}; +} __packed; /* * driver-specific node @@ -235,21 +235,23 @@ struct ath_softc { u_int8_t sc_hwmap[32]; /* h/w rate ix to IEEE table */ HAL_INT sc_imask; /* interrupt mask copy */ -#ifdef __FreeBSD__ - struct bpf_if *sc_drvbpf; -#else +#if NBPFILTER > 0 caddr_t sc_drvbpf; -#endif + union { - struct ath_tx_radiotap_header th; - u_int8_t pad[64]; - } u_tx_rt; - int sc_tx_th_len; + struct ath_rx_radiotap_header th; + uint8_t pad[IEEE80211_RADIOTAP_HDRLEN]; + } sc_rxtapu; +#define sc_rxtap sc_rxtapu.th + int sc_rxtap_len; + union { - struct ath_rx_radiotap_header th; - u_int8_t pad[64]; - } u_rx_rt; - int sc_rx_th_len; + struct ath_tx_radiotap_header th; + uint8_t pad[IEEE80211_RADIOTAP_HDRLEN]; + } sc_txtapu; +#define sc_txtap sc_txtapu.th + int sc_txtap_len; +#endif struct ath_desc *sc_desc; /* TX/RX descriptors */ bus_dma_segment_t sc_dseg; @@ -362,9 +364,6 @@ enum { #define ATH_IS_ENABLED(sc) ((sc)->sc_flags & ATH_ENABLED) #endif -#define sc_tx_th u_tx_rt.th -#define sc_rx_th u_rx_rt.th - #define ATH_LOCK_INIT(_sc) \ mtx_init(&(_sc)->sc_mtx, device_get_nameunit((_sc)->sc_dev), \ MTX_NETWORK_LOCK, MTX_DEF | MTX_RECURSE) |