diff options
Diffstat (limited to 'sys')
-rw-r--r-- | sys/arch/luna88k/luna88k/locore.S | 52 | ||||
-rw-r--r-- | sys/arch/luna88k/luna88k/machdep.c | 31 | ||||
-rw-r--r-- | sys/arch/m88k/include/cpu.h | 11 | ||||
-rw-r--r-- | sys/arch/m88k/include/param.h | 4 | ||||
-rw-r--r-- | sys/arch/m88k/include/proc.h | 3 | ||||
-rw-r--r-- | sys/arch/m88k/m88k/eh_common.S | 38 | ||||
-rw-r--r-- | sys/arch/m88k/m88k/m88k_machdep.c | 34 | ||||
-rw-r--r-- | sys/arch/m88k/m88k/pmap.c | 16 | ||||
-rw-r--r-- | sys/arch/m88k/m88k/process.S | 11 | ||||
-rw-r--r-- | sys/arch/m88k/m88k/vm_machdep.c | 20 | ||||
-rw-r--r-- | sys/arch/mvme88k/mvme88k/locore.S | 53 | ||||
-rw-r--r-- | sys/arch/mvme88k/mvme88k/machdep.c | 29 |
12 files changed, 92 insertions, 210 deletions
diff --git a/sys/arch/luna88k/luna88k/locore.S b/sys/arch/luna88k/luna88k/locore.S index c4d9a9aebcf..b4da0dcc803 100644 --- a/sys/arch/luna88k/luna88k/locore.S +++ b/sys/arch/luna88k/luna88k/locore.S @@ -1,4 +1,4 @@ -/* $OpenBSD: locore.S,v 1.7 2004/12/24 22:50:30 miod Exp $ */ +/* $OpenBSD: locore.S,v 1.8 2005/10/12 19:05:39 miod Exp $ */ /* * Copyright (c) 1998 Steve Murphree, Jr. * Copyright (c) 1996 Nivas Madhur @@ -260,7 +260,6 @@ GLOBAL(start_text) ASLOCAL(master_start) /* * Switch to interrupt stack - * Use idle_u's stack instead? */ or.u r31, r0, hi16(_ASM_LABEL(intstack_end)) or r31, r31, lo16(_ASM_LABEL(intstack_end)) @@ -311,34 +310,32 @@ ASLOCAL(master_start) or.u r2, r0, hi16(0x41000000) st r0, r2, lo16(0x41000000) - /* still on int stack */ + /* + * luna88k_bootstrap(), among other things, clears proc0's u area. + * We are still using the interrupt stack here, thus we are not + * affected... + */ bsr _C_LABEL(luna88k_bootstrap) /* - * we now know our cpu number, so we - * can set interrupt_stack[cpu_number()] = intstack + * ...and we can switch to the u area stack now. */ - ldcr r10, SR1 - extu r10, r10, FLAG_CPU_FIELD_WIDTH<0> /* r10 <-- CPU# */ - - /* figure interrupt_stack[cpu_number()] */ - or.u r11, r0, hi16(_C_LABEL(interrupt_stack)) - or r11, r11, lo16(_C_LABEL(interrupt_stack)) - or.u r12, r0, hi16(_C_LABEL(intstack)) - or r12, r12, lo16(_C_LABEL(intstack)) - st r12, r11 [r10] - - /* switch to proc0 uarea */ - or.u r10, r0, hi16(UADDR) - or r31, r10,lo16(UADDR) - addu r31, r31, USIZE - 8 - - /* make the call: main() */ - or.u r2, r0, hi16(UADDR) - or r2, r2,lo16(UADDR) - bsr.n _C_LABEL(main) - addu r2, r2, USIZE - 8 - bsr _C_LABEL(panic) + or.u r10, r0, hi16(_C_LABEL(curpcb)) + ld r31, r10, lo16(_C_LABEL(curpcb)) + addu r31, r31, USIZE + + /* call main() - no arguments although main() still defines one */ + bsr _C_LABEL(main) + or.u r2, r0, hi16(_ASM_LABEL(main_panic)) + bsr.n _C_LABEL(panic) + or r2, r2, lo16(_ASM_LABEL(main_panic)) + + data + .align 4 +ASLOCAL(main_panic) + string "main() returned\0" + text + .align 8 /* * slave CPUs starts here @@ -443,9 +440,6 @@ GLOBAL(idle_u) ASLOCAL(u0) space UPAGES * NBPG -/* UPAGES get mapped to kstack */ -ASGLOBAL(kstack) - word UADDR GLOBAL(ret_addr) word 0 /* XMEM spin lock -- to count CPUs */ diff --git a/sys/arch/luna88k/luna88k/machdep.c b/sys/arch/luna88k/luna88k/machdep.c index fae882a9d6b..162d826f7d2 100644 --- a/sys/arch/luna88k/luna88k/machdep.c +++ b/sys/arch/luna88k/luna88k/machdep.c @@ -1,4 +1,4 @@ -/* $OpenBSD: machdep.c,v 1.22 2005/09/25 20:30:03 miod Exp $ */ +/* $OpenBSD: machdep.c,v 1.23 2005/10/12 19:05:39 miod Exp $ */ /* * Copyright (c) 1998, 1999, 2000, 2001 Steve Murphree, Jr. * Copyright (c) 1996 Nivas Madhur @@ -127,9 +127,6 @@ void slave_pre_main(void); int slave_main(void); void vector_init(m88k_exception_vector_area *, unsigned *); -extern void load_u_area(struct proc *); -extern void save_u_area(struct proc *, vaddr_t); - vaddr_t size_memory(void); void powerdown(void); void get_fuse_rom_data(void); @@ -138,8 +135,6 @@ char *nvram_by_symbol(char *); void get_autoboot_device(void); /* in disksubr.c */ int clockintr(void *); /* in clock.c */ -vaddr_t interrupt_stack[MAX_CPUS]; - /* * *int_mask_reg[CPU] * Points to the hardware interrupt status register for each CPU. @@ -397,7 +392,7 @@ cpu_startup() int sz, i; vsize_t size; int base, residual; - vaddr_t minaddr, maxaddr, uarea_pages; + vaddr_t minaddr, maxaddr; /* * Initialize error message buffer (at end of core). @@ -491,17 +486,6 @@ cpu_startup() panic("startup: table size inconsistency"); /* - * Grab UADDR virtual address - */ - uarea_pages = UADDR; - uvm_map(kernel_map, (vaddr_t *)&uarea_pages, USPACE, - NULL, UVM_UNKNOWN_OFFSET, 0, - UVM_MAPFLAG(UVM_PROT_NONE, UVM_PROT_NONE, UVM_INH_NONE, - UVM_ADV_NORMAL, 0)); - if (uarea_pages != UADDR) - panic("uarea_pages %lx: UADDR not free", uarea_pages); - - /* * Grab the OBIO space that we hardwired in pmap_bootstrap */ obiova = OBIO_START; @@ -891,7 +875,6 @@ get_slave_stack() panic("Cannot allocate slave stack for cpu %d", cpu_number()); - interrupt_stack[cpu_number()] = addr; return addr; } @@ -1196,16 +1179,8 @@ luna88k_bootstrap() uvm_page_physload(atop(avail_start), atop(avail_end), atop(avail_start), atop(avail_end),VM_FREELIST_DEFAULT); - /* Initialize cached PTEs for u-area mapping. */ - save_u_area(&proc0, (vaddr_t)proc0paddr); - - /* - * Map proc0's u-area at the standard address (UADDR). - */ - load_u_area(&proc0); - /* Initialize the "u-area" pages. */ - bzero((caddr_t)UADDR, UPAGES * PAGE_SIZE); + bzero((caddr_t)curpcb, USPACE); #ifdef DEBUG printf("leaving luna88k_bootstrap()\n"); #endif diff --git a/sys/arch/m88k/include/cpu.h b/sys/arch/m88k/include/cpu.h index b1a00496a60..bb5a253b778 100644 --- a/sys/arch/m88k/include/cpu.h +++ b/sys/arch/m88k/include/cpu.h @@ -1,4 +1,4 @@ -/* $OpenBSD: cpu.h,v 1.5 2004/11/08 16:39:31 miod Exp $ */ +/* $OpenBSD: cpu.h,v 1.6 2005/10/12 19:05:43 miod Exp $ */ /* * Copyright (c) 1996 Nivas Madhur * Copyright (c) 1992, 1993 @@ -65,9 +65,10 @@ * definitions of cpu-dependent requirements * referenced in generic code */ -#define cpu_exec(p) /* nothing */ -#define cpu_wait(p) /* nothing */ -#define cpu_swapout(p) /* nothing */ +#define cpu_exec(p) do { /* nothing */ } while (0) +#define cpu_wait(p) do { /* nothing */ } while (0) +#define cpu_swapin(p) do { /* nothing */ } while (0) +#define cpu_swapout(p) do { /* nothing */ } while (0) /* * Arguments to hardclock and gatherstats encapsulate the previous @@ -82,7 +83,7 @@ struct clockframe { #define CLKF_USERMODE(framep) ((((struct trapframe *)(framep))->tf_epsr & PSR_MODE) == 0) #define CLKF_PC(framep) (((struct trapframe *)(framep))->tf_sxip & XIP_ADDR) -#define CLKF_INTR(framep) (((struct trapframe *)(framep))->tf_r[31] >= UADDR) +#define CLKF_INTR(framep) (0) /* XXX temporary */ /* * Get interrupt glue. diff --git a/sys/arch/m88k/include/param.h b/sys/arch/m88k/include/param.h index c86f46cbc6e..6a41569f6a3 100644 --- a/sys/arch/m88k/include/param.h +++ b/sys/arch/m88k/include/param.h @@ -1,4 +1,4 @@ -/* $OpenBSD: param.h,v 1.6 2005/09/12 23:05:05 miod Exp $ */ +/* $OpenBSD: param.h,v 1.7 2005/10/12 19:05:43 miod Exp $ */ /* * Copyright (c) 1999 Steve Murphree, Jr. * Copyright (c) 1988 University of Utah. @@ -81,8 +81,6 @@ #define USPACE (UPAGES * NBPG) #define USPACE_ALIGN (0) /* u-area alignment 0-none */ -#define UADDR 0xeee00000 /* address of u */ - /* * Constants related to network buffer management. * MCLBYTES must be no larger than the software page size, and, diff --git a/sys/arch/m88k/include/proc.h b/sys/arch/m88k/include/proc.h index c658452b17a..cd51bdb3fee 100644 --- a/sys/arch/m88k/include/proc.h +++ b/sys/arch/m88k/include/proc.h @@ -1,4 +1,4 @@ -/* $OpenBSD: proc.h,v 1.2 2005/05/18 16:44:37 miod Exp $ */ +/* $OpenBSD: proc.h,v 1.3 2005/10/12 19:05:43 miod Exp $ */ /* * Copyright (c) 1992, 1993 * The Regents of the University of California. All rights reserved. @@ -51,7 +51,6 @@ struct trapframe; */ struct mdproc { struct trapframe *md_tf; /* trap/syscall registers */ - int md_upte[UPAGES]; /* ptes for mapping u page */ /* * Single stepping is done by moving two breakpoints in the diff --git a/sys/arch/m88k/m88k/eh_common.S b/sys/arch/m88k/m88k/eh_common.S index c3a2e104d97..e9d69126496 100644 --- a/sys/arch/m88k/m88k/eh_common.S +++ b/sys/arch/m88k/m88k/eh_common.S @@ -1,4 +1,4 @@ -/* $OpenBSD: eh_common.S,v 1.11 2005/09/25 20:30:03 miod Exp $ */ +/* $OpenBSD: eh_common.S,v 1.12 2005/10/12 19:05:44 miod Exp $ */ /* * Mach Operating System * Copyright (c) 1993-1991 Carnegie Mellon University @@ -1010,9 +1010,9 @@ ASLOCAL(m88100_use_SR3_pcb) * Consequently, we never picked up a stack. Do so now. * R1 is currently free (saved in the exception frame pointed at by * r30) */ - or.u r1, r0, hi16(_ASM_LABEL(kstack)) - ld r1, r1, lo16(_ASM_LABEL(kstack)) - addu r1, r1, USIZE-SIZEOF_EF + or.u r1, r0, hi16(_C_LABEL(curpcb)) + ld r1, r1, lo16(_C_LABEL(curpcb)) + addu r1, r1, USIZE - SIZEOF_EF st FLAGS,r1, REG_OFF(EF_FLAGS) /* store flags */ st r31, r1, GENREG_OFF(31) /* store r31 - now free */ st r30, r1, REG_OFF(EF_SR3) /* store old SR3 (pcb) */ @@ -1041,6 +1041,14 @@ ASLOCAL(m88100_pickup_stack) or.u r31, r0, hi16(_C_LABEL(curpcb)) ld r31, r31, lo16(_C_LABEL(curpcb)) addu r31, r31, PCB_USER_STATE /* point to user save area */ + + /* + * WARNING! Using pcb->user_state as the exception frame + * AND stack pointer, means we can not afford using the stack + * until we have saved enough and can go back to the top of the u area, + * after the FPU is enabled. + */ + st FLAGS,r31, REG_OFF(EF_FLAGS) /* save flags */ st r1, r31, GENREG_OFF(1) /* save prev. r1 (now free) */ ldcr r1, SR3 /* save previous r31 */ @@ -1523,8 +1531,8 @@ ASLOCAL(m88100_fpu_enable) ld r2, r31, REG_OFF(EF_EPSR) bb1 PSR_SUPERVISOR_MODE_BIT, r2, 1f /* if in kernel mode */ - or.u r31, r0, hi16(_ASM_LABEL(kstack)) - ld r31, r31, lo16(_ASM_LABEL(kstack)) + or.u r31, r0, hi16(_C_LABEL(curpcb)) + ld r31, r31, lo16(_C_LABEL(curpcb)) addu r31, r31, USIZE /* point at proper end */ 1: @@ -2262,9 +2270,9 @@ ASLOCAL(m88110_use_SR3_pcb) * R1 is currently free (saved in the exception frame pointed at by * r30) */ - or.u r1, r0, hi16(_ASM_LABEL(kstack)) - ld r1, r1, lo16(_ASM_LABEL(kstack)) - addu r1, r1, USIZE-SIZEOF_EF + or.u r1, r0, hi16(_C_LABEL(curpcb)) + ld r1, r1, lo16(_C_LABEL(curpcb)) + addu r1, r1, USIZE - SIZEOF_EF st FLAGS,r1, REG_OFF(EF_FLAGS) /* store flags */ st r31, r1, GENREG_OFF(31) /* store r31 - now free */ st r30, r1, REG_OFF(EF_SR3) /* store old SR3 (pcb) */ @@ -2294,6 +2302,14 @@ ASLOCAL(m88110_pickup_stack) or.u r31, r0, hi16(_C_LABEL(curpcb)) ld r31, r31, lo16(_C_LABEL(curpcb)) addu r31, r31, PCB_USER_STATE /* point to user save area */ + + /* + * WARNING! Using pcb->user_state as the exception frame + * AND stack pointer, means we can not afford using the stack + * until we have saved enough and can go back to the top of the u area, + * after the FPU is enabled. + */ + st FLAGS,r31, REG_OFF(EF_FLAGS) /* save flags */ st r1, r31, GENREG_OFF(1) /* save prev. r1 (now free)*/ ldcr r1, SR3 /* save previous r31 */ @@ -2518,8 +2534,8 @@ ASLOCAL(m88110_fpu_enable) ld r2, r31, REG_OFF(EF_EPSR) bb1 PSR_SUPERVISOR_MODE_BIT, r2, 1f /* if in kernel mode */ - or.u r31, r0, hi16(_ASM_LABEL(kstack)) - ld r31, r31, lo16(_ASM_LABEL(kstack)) + or.u r31, r0, hi16(_C_LABEL(curpcb)) + ld r31, r31, lo16(_C_LABEL(curpcb)) addu r31, r31, USIZE /* point at proper end */ 1: diff --git a/sys/arch/m88k/m88k/m88k_machdep.c b/sys/arch/m88k/m88k/m88k_machdep.c index bb177893c5d..baa23a75a2e 100644 --- a/sys/arch/m88k/m88k/m88k_machdep.c +++ b/sys/arch/m88k/m88k/m88k_machdep.c @@ -1,4 +1,4 @@ -/* $OpenBSD: m88k_machdep.c,v 1.4 2005/09/25 20:55:14 miod Exp $ */ +/* $OpenBSD: m88k_machdep.c,v 1.5 2005/10/12 19:05:44 miod Exp $ */ /* * Copyright (c) 1998, 1999, 2000, 2001 Steve Murphree, Jr. * Copyright (c) 1996 Nivas Madhur @@ -75,8 +75,6 @@ /* prototypes */ void regdump(struct trapframe *f); void dumpsys(void); -void save_u_area(struct proc *, vaddr_t); -void load_u_area(struct proc *); void dumpconf(void); int longformat = 1; /* for regdump() */ @@ -88,36 +86,6 @@ int longformat = 1; /* for regdump() */ int safepri = IPL_NONE; /* - * Setup u area ptes for u area double mapping. - */ - -void -save_u_area(struct proc *p, vaddr_t va) -{ - int i; - - for (i = 0; i < UPAGES; i++) { - p->p_md.md_upte[i] = *((pt_entry_t *)kvtopte(va)); - va += PAGE_SIZE; - } -} - -void -load_u_area(struct proc *p) -{ - int i; - vaddr_t va; - pt_entry_t *t; - - for (i = 0, va = UADDR; i < UPAGES; i++) { - t = kvtopte(va); - *t = p->p_md.md_upte[i]; - va += PAGE_SIZE; - } - cmmu_flush_tlb(cpu_number(), 1, UADDR, UPAGES); -} - -/* * Set registers on exec. * Clear all except sp and pc. */ diff --git a/sys/arch/m88k/m88k/pmap.c b/sys/arch/m88k/m88k/pmap.c index 6c985e948f9..4f7ebb6adb2 100644 --- a/sys/arch/m88k/m88k/pmap.c +++ b/sys/arch/m88k/m88k/pmap.c @@ -1,4 +1,4 @@ -/* $OpenBSD: pmap.c,v 1.12 2005/09/25 20:55:14 miod Exp $ */ +/* $OpenBSD: pmap.c,v 1.13 2005/10/12 19:05:44 miod Exp $ */ /* * Copyright (c) 2001-2004, Miodrag Vallat * Copyright (c) 1998-2001 Steve Murphree, Jr. @@ -545,7 +545,6 @@ pmap_bootstrap(vaddr_t load_start) sdt_entry_t *kmap; vaddr_t vaddr, virt; paddr_t s_text, e_text, kpdt_phys; - pt_entry_t *pte; unsigned int kernel_pmap_size, pdt_size; int i; pmap_table_t ptable; @@ -722,19 +721,6 @@ pmap_bootstrap(vaddr_t load_start) virtual_avail = virt; /* - * Set translation for UPAGES at UADDR. The idea is we want to - * have translations set up for UADDR. Later on, the ptes for - * for this address will be set so that kstack will refer - * to the u area. Make sure pmap knows about this virtual - * address by doing vm_findspace on kernel_map. - */ - - for (i = 0, virt = UADDR; i < UPAGES; i++, virt += PAGE_SIZE) { - if ((pte = pmap_pte(kernel_pmap, virt)) == PT_ENTRY_NULL) - pmap_expand_kmap(virt, VM_PROT_READ | VM_PROT_WRITE, 0); - } - - /* * Switch to using new page tables */ diff --git a/sys/arch/m88k/m88k/process.S b/sys/arch/m88k/m88k/process.S index 86309aa5bfe..f171ea433b1 100644 --- a/sys/arch/m88k/m88k/process.S +++ b/sys/arch/m88k/m88k/process.S @@ -1,4 +1,4 @@ -/* $OpenBSD: process.S,v 1.8 2005/10/12 19:00:21 miod Exp $ */ +/* $OpenBSD: process.S,v 1.9 2005/10/12 19:05:44 miod Exp $ */ /* * Copyright (c) 1996 Nivas Madhur * All rights reserved. @@ -225,15 +225,6 @@ ASLOCAL(cpu_switch_found) or r2, r0, r9 or r9, r0, r14 /* restore p saved in r14 */ - /* - * Since we are about to replace the u area mapping, we need to - * switch to a neutral stack now. - */ - or.u r31, r0, hi16(_ASM_LABEL(intstack_end)) - or r31,r31, lo16(_ASM_LABEL(intstack_end)) - - bsr.n _C_LABEL(load_u_area) - or r2, r0, r9 #if defined(MULTIPROCESSOR) || defined(LOCKDEBUG) bsr _C_LABEL(sched_unlock_idle) diff --git a/sys/arch/m88k/m88k/vm_machdep.c b/sys/arch/m88k/m88k/vm_machdep.c index 493f33d110d..5a0603657b5 100644 --- a/sys/arch/m88k/m88k/vm_machdep.c +++ b/sys/arch/m88k/m88k/vm_machdep.c @@ -1,4 +1,4 @@ -/* $OpenBSD: vm_machdep.c,v 1.5 2005/09/25 20:55:14 miod Exp $ */ +/* $OpenBSD: vm_machdep.c,v 1.6 2005/10/12 19:05:44 miod Exp $ */ /* * Copyright (c) 1998 Steve Murphree, Jr. @@ -91,7 +91,6 @@ cpu_fork(p1, p2, stack, stacksize, func, arg) } *ksfp; extern struct pcb *curpcb; extern void proc_trampoline(void); - extern void save_u_area(struct proc *, vaddr_t); /* Copy pcb from p1 to p2. */ if (p1 == curproc) { @@ -107,9 +106,6 @@ cpu_fork(p1, p2, stack, stacksize, func, arg) p2->p_addr->u_pcb.kernel_state.pcb_ipl = IPL_NONE; /* XXX */ p2->p_md.md_tf = (struct trapframe *)USER_REGS(p2); - /*XXX these may not be necessary nivas */ - save_u_area(p2, (vaddr_t)p2->p_addr); - /* * Create a switch frame for proc 2 */ @@ -207,20 +203,6 @@ cpu_coredump(p, vp, cred, chdr) } /* - * Finish a swapin operation. - * We neded to update the cached PTEs for the user area in the - * machine dependent part of the proc structure. - */ - -void -cpu_swapin(struct proc *p) -{ - extern void save_u_area(struct proc *, vaddr_t); - - save_u_area(p, (vaddr_t)p->p_addr); -} - -/* * Map an IO request into kernel virtual address space. Requests fall into * one of five catagories: * diff --git a/sys/arch/mvme88k/mvme88k/locore.S b/sys/arch/mvme88k/mvme88k/locore.S index 1ea081bf111..793fe7169ea 100644 --- a/sys/arch/mvme88k/mvme88k/locore.S +++ b/sys/arch/mvme88k/mvme88k/locore.S @@ -1,4 +1,4 @@ -/* $OpenBSD: locore.S,v 1.41 2004/12/24 22:50:30 miod Exp $ */ +/* $OpenBSD: locore.S,v 1.42 2005/10/12 19:05:44 miod Exp $ */ /* * Copyright (c) 1998 Steve Murphree, Jr. * Copyright (c) 1996 Nivas Madhur @@ -316,7 +316,6 @@ GLOBAL(start_text) ASLOCAL(master_start) /* * Switch to interrupt stack - * Use idle_u's stack instead? */ or.u r31, r0, hi16(_ASM_LABEL(intstack_end)) or r31, r31, lo16(_ASM_LABEL(intstack_end)) @@ -340,34 +339,33 @@ ASLOCAL(master_start) bsr.n _C_LABEL(vector_init) ldcr r2, VBR - /* still on int stack */ + /* + * mvme_bootstrap(), among other things, clears proc0's u area. + * We are still using the interrupt stack here, thus we are not + * affected... + */ bsr _C_LABEL(mvme_bootstrap) /* - * we now know our cpu number, so we - * can set interrupt_stack[cpu_number()] = intstack + * ...and we can switch to the u area stack now. */ - ldcr r10, SR1 - extu r10, r10, FLAG_CPU_FIELD_WIDTH<0> /* r10 <-- CPU# */ - - /* figure interrupt_stack[cpu_number()] */ - or.u r11, r0, hi16(_C_LABEL(interrupt_stack)) - or r11, r11, lo16(_C_LABEL(interrupt_stack)) - or.u r12, r0, hi16(_C_LABEL(intstack)) - or r12, r12, lo16(_C_LABEL(intstack)) - st r12, r11 [r10] - - /* switch to proc0 uarea */ - or.u r10, r0, hi16(UADDR) - or r31, r10,lo16(UADDR) - addu r31, r31, USIZE - 8 - - /* make the call: main() */ - or.u r2, r0, hi16(UADDR) - or r2, r2,lo16(UADDR) - bsr.n _C_LABEL(main) - addu r2, r2, USIZE - 8 - bsr _C_LABEL(panic) + or.u r10, r0, hi16(_C_LABEL(curpcb)) + ld r31, r10,lo16(_C_LABEL(curpcb)) + addu r31, r31, USIZE + + /* call main() - no arguments although main() still defines one */ + bsr _C_LABEL(main) + + or.u r2, r0, hi16(_ASM_LABEL(main_panic)) + bsr.n _C_LABEL(panic) + or r2, r2, lo16(_ASM_LABEL(main_panic)) + + data + .align 4 +ASLOCAL(main_panic) + string "main() returned\0" + text + .align 8 /* * slave CPUs starts here @@ -477,9 +475,6 @@ GLOBAL(idle_u) ASLOCAL(u0) space UPAGES * NBPG -/* UPAGES get mapped to kstack */ -ASGLOBAL(kstack) - word UADDR GLOBAL(ret_addr) word 0 /* XMEM spin lock -- to count CPUs */ diff --git a/sys/arch/mvme88k/mvme88k/machdep.c b/sys/arch/mvme88k/mvme88k/machdep.c index 51f969e82a9..16e38ca0e01 100644 --- a/sys/arch/mvme88k/mvme88k/machdep.c +++ b/sys/arch/mvme88k/mvme88k/machdep.c @@ -1,4 +1,4 @@ -/* $OpenBSD: machdep.c,v 1.167 2005/09/25 20:30:03 miod Exp $ */ +/* $OpenBSD: machdep.c,v 1.168 2005/10/12 19:05:44 miod Exp $ */ /* * Copyright (c) 1998, 1999, 2000, 2001 Steve Murphree, Jr. * Copyright (c) 1996 Nivas Madhur @@ -111,8 +111,6 @@ int slave_main(void); void vector_init(m88k_exception_vector_area *, unsigned *); void _doboot(void); -extern void load_u_area(struct proc *); -extern void save_u_area(struct proc *, vaddr_t); extern void setlevel(unsigned int); extern void m187_bootstrap(void); @@ -129,7 +127,6 @@ extern void m197_setupiackvectors(void); extern void m197_startup(void); intrhand_t intr_handlers[NVMEINTR]; -vaddr_t interrupt_stack[MAX_CPUS]; /* board dependent pointers */ void (*md_interrupt_func_ptr)(u_int, struct trapframe *); @@ -363,7 +360,7 @@ cpu_startup() int sz, i; vsize_t size; int base, residual; - vaddr_t minaddr, maxaddr, uarea_pages; + vaddr_t minaddr, maxaddr; /* * Initialize error message buffer (at end of core). @@ -394,17 +391,6 @@ cpu_startup() panic("startup: table size inconsistency"); /* - * Grab UADDR virtual address - */ - uarea_pages = UADDR; - uvm_map(kernel_map, (vaddr_t *)&uarea_pages, USPACE, - NULL, UVM_UNKNOWN_OFFSET, 0, - UVM_MAPFLAG(UVM_PROT_NONE, UVM_PROT_NONE, UVM_INH_NONE, - UVM_ADV_NORMAL, 0)); - if (uarea_pages != UADDR) - panic("uarea_pages %lx: UADDR not free", uarea_pages); - - /* * Grab machine dependent memory spaces */ switch (brdtyp) { @@ -840,7 +826,6 @@ get_slave_stack() panic("Cannot allocate slave stack for cpu %d", cpu_number()); - interrupt_stack[cpu_number()] = addr; return addr; } @@ -1184,16 +1169,8 @@ mvme_bootstrap() uvm_page_physload(atop(avail_start), atop(avail_end), atop(avail_start), atop(avail_end), VM_FREELIST_DEFAULT); - /* Initialize cached PTEs for u-area mapping. */ - save_u_area(&proc0, (vaddr_t)proc0paddr); - - /* - * Map proc0's u-area at the standard address (UADDR). - */ - load_u_area(&proc0); - /* Initialize the "u-area" pages. */ - bzero((caddr_t)UADDR, UPAGES * PAGE_SIZE); + bzero((caddr_t)curpcb, USPACE); #ifdef DEBUG printf("leaving mvme_bootstrap()\n"); #endif |