diff options
Diffstat (limited to 'sys')
-rw-r--r-- | sys/conf/files | 9 | ||||
-rw-r--r-- | sys/dev/ic/mpt.c | 2018 | ||||
-rw-r--r-- | sys/dev/ic/mpt.h | 217 | ||||
-rw-r--r-- | sys/dev/ic/mpt_debug.c | 644 | ||||
-rw-r--r-- | sys/dev/ic/mpt_mpilib.h | 5055 | ||||
-rw-r--r-- | sys/dev/ic/mpt_openbsd.c | 1578 | ||||
-rw-r--r-- | sys/dev/ic/mpt_openbsd.h | 356 | ||||
-rw-r--r-- | sys/dev/pci/files.pci | 6 | ||||
-rw-r--r-- | sys/dev/pci/mpt_pci.c | 331 |
9 files changed, 2 insertions, 10212 deletions
diff --git a/sys/conf/files b/sys/conf/files index f1708f5a447..56eb24a82a9 100644 --- a/sys/conf/files +++ b/sys/conf/files @@ -1,4 +1,4 @@ -# $OpenBSD: files,v 1.378 2006/06/19 15:13:35 deraadt Exp $ +# $OpenBSD: files,v 1.379 2006/06/29 22:14:41 dlg Exp $ # $NetBSD: files,v 1.87 1996/05/19 17:17:50 jonathan Exp $ # @(#)files.newconf 7.5 (Berkeley) 5/10/93 @@ -181,13 +181,6 @@ device isp: scsi file dev/ic/isp.c isp file dev/ic/isp_openbsd.c isp -# LSILogic Fusion-MPT I/O Processor SCSI/FC Controllers -# -device mpt: scsi -file dev/ic/mpt.c mpt -file dev/ic/mpt_debug.c mpt -file dev/ic/mpt_openbsd.c mpt - # LSI Logic Fusion-MPT Message Passing Interface device mpi: scsi file dev/ic/mpi.c mpi diff --git a/sys/dev/ic/mpt.c b/sys/dev/ic/mpt.c deleted file mode 100644 index a33a79425f0..00000000000 --- a/sys/dev/ic/mpt.c +++ /dev/null @@ -1,2018 +0,0 @@ -/* $OpenBSD: mpt.c,v 1.24 2006/02/11 01:20:43 krw Exp $ */ -/* $NetBSD: mpt.c,v 1.4 2003/11/02 11:07:45 wiz Exp $ */ - -/* - * Copyright (c) 2000, 2001 by Greg Ansley - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * 1. Redistributions of source code must retain the above copyright - * notice immediately at the beginning of the file, without modification, - * this list of conditions, and the following disclaimer. - * 2. The name of the author may not be used to endorse or promote products - * derived from this software without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND - * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE - * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE FOR - * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS - * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) - * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT - * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY - * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF - * SUCH DAMAGE. - */ -/* - * Additional Copyright (c) 2002 by Matthew Jacob under same license. - */ - -/* - * mpt.c: - * - * Generic routines for LSI Fusion adapters. - * - * Adapted from the FreeBSD "mpt" driver by Jason R. Thorpe for - * Wasabi Systems, Inc. - */ - -#include <sys/cdefs.h> -/* __KERNEL_RCSID(0, "$NetBSD: mpt.c,v 1.4 2003/11/02 11:07:45 wiz Exp $"); */ - -#include <dev/ic/mpt.h> - -#define MPT_MAX_TRIES 3 -#define MPT_MAX_WAIT 300000 - -static int maxwait_ack = 0; -static int maxwait_int = 0; -static int maxwait_state = 0; - -#ifdef MPT_DEBUG -int mpt_debug = 11; -#endif /* MPT_DEBUG */ - -__inline u_int32_t mpt_rd_db(struct mpt_softc *); -__inline u_int32_t mpt_rd_intr(struct mpt_softc *); -int mpt_wait_db_ack(struct mpt_softc *); -int mpt_wait_db_int(struct mpt_softc *); -int mpt_wait_state(struct mpt_softc *, enum DB_STATE_BITS); -int mpt_get_iocfacts(struct mpt_softc *, MSG_IOC_FACTS_REPLY *); -int mpt_get_portfacts(struct mpt_softc *, MSG_PORT_FACTS_REPLY *); -int mpt_send_ioc_init(struct mpt_softc *, u_int32_t); -#ifdef MPT_DEBUG -void mpt_print_header(struct mpt_softc *, char *, CONFIG_PAGE_HEADER *); -#endif /* MPT_DEBUG */ -int mpt_read_config_info_mfg(struct mpt_softc *); -int mpt_read_config_info_iou(struct mpt_softc *); -int mpt_read_config_info_ioc(struct mpt_softc *); -int mpt_read_config_info_raid(struct mpt_softc *); -int mpt_read_config_info_spi(struct mpt_softc *); -int mpt_set_initial_config_spi(struct mpt_softc *); -int mpt_send_port_enable(struct mpt_softc *, int); -int mpt_send_event_request(struct mpt_softc *, int); - -__inline u_int32_t -mpt_rd_db(struct mpt_softc *mpt) -{ - return mpt_read(mpt, MPT_OFFSET_DOORBELL); -} - -__inline u_int32_t -mpt_rd_intr(struct mpt_softc *mpt) -{ - return mpt_read(mpt, MPT_OFFSET_INTR_STATUS); -} - -/* Busy wait for a door bell to be read by IOC */ -int -mpt_wait_db_ack(struct mpt_softc *mpt) -{ - int i; - for (i=0; i < MPT_MAX_WAIT; i++) { - if (!MPT_DB_IS_BUSY(mpt_rd_intr(mpt))) { - maxwait_ack = i > maxwait_ack ? i : maxwait_ack; - return MPT_OK; - } - - DELAY(100); - } - return MPT_FAIL; -} - -/* Busy wait for a door bell interrupt */ -int -mpt_wait_db_int(struct mpt_softc *mpt) -{ - int i; - for (i=0; i < MPT_MAX_WAIT; i++) { - if (MPT_DB_INTR(mpt_rd_intr(mpt))) { - maxwait_int = i > maxwait_int ? i : maxwait_int; - return MPT_OK; - } - DELAY(100); - } - return MPT_FAIL; -} - -/* Wait for IOC to transition to a give state */ -void -mpt_check_doorbell(struct mpt_softc *mpt) -{ - u_int32_t db = mpt_rd_db(mpt); - - /* prepare this function for error path */ - /* if (MPT_STATE(db) != MPT_DB_STATE_RUNNING) { */ - switch (MPT_STATE(db)) { - case MPT_DB_STATE_FAULT: - case MPT_DB_STATE_READY: - /* 1030 needs reset, issue IOC_INIT */ - /* FIXME */ - if (mpt_init(mpt, MPT_DB_INIT_HOST) != 0) - panic("%s: Can't get MPT IOC operational", - mpt->mpt_dev.dv_xname); - break; - - default: - /* nothing done for now */ - break; - } -} - -/* Wait for IOC to transition to a give state */ -int -mpt_wait_state(struct mpt_softc *mpt, enum DB_STATE_BITS state) -{ - int i; - - for (i = 0; i < MPT_MAX_WAIT; i++) { - u_int32_t db = mpt_rd_db(mpt); - if (MPT_STATE(db) == state) { - maxwait_state = i > maxwait_state ? i : maxwait_state; - return (MPT_OK); - } - DELAY(100); - } - return (MPT_FAIL); -} - - -/* Issue the reset COMMAND to the IOC */ -int -mpt_soft_reset(struct mpt_softc *mpt) -{ - DNPRINTF(10, "soft reset\n"); - - /* Have to use hard reset if we are not in Running state */ - if (MPT_STATE(mpt_rd_db(mpt)) != MPT_DB_STATE_RUNNING) { - mpt_prt(mpt, "soft reset failed: device not running"); - return MPT_FAIL; - } - - /* If door bell is in use we don't have a chance of getting - * a word in since the IOC probably crashed in message - * processing. So don't waste our time. - */ - if (MPT_DB_IS_IN_USE(mpt_rd_db(mpt))) { - mpt_prt(mpt, "soft reset failed: doorbell wedged"); - return MPT_FAIL; - } - - /* Send the reset request to the IOC */ - mpt_write(mpt, MPT_OFFSET_DOORBELL, - MPI_FUNCTION_IOC_MESSAGE_UNIT_RESET << MPI_DOORBELL_FUNCTION_SHIFT); - if (mpt_wait_db_ack(mpt) != MPT_OK) { - mpt_prt(mpt, "soft reset failed: ack timeout"); - return MPT_FAIL; - } - - /* Wait for the IOC to reload and come out of reset state */ - if (mpt_wait_state(mpt, MPT_DB_STATE_READY) != MPT_OK) { - mpt_prt(mpt, "soft reset failed: device did not start running"); - return MPT_FAIL; - } - - return MPT_OK; -} - -/* This is a magic diagnostic reset that resets all the ARM - * processors in the chip. - */ -void -mpt_hard_reset(struct mpt_softc *mpt) -{ - u_int32_t diag0; - int count; - - /* This extra read comes for the Linux source - * released by LSI. It's function is undocumented! - */ - DNPRINTF(10, "hard reset\n"); - mpt_read(mpt, MPT_OFFSET_FUBAR); - - /* Enable diagnostic registers */ - mpt_write(mpt, MPT_OFFSET_SEQUENCE, MPT_DIAG_SEQUENCE_1); - mpt_write(mpt, MPT_OFFSET_SEQUENCE, MPT_DIAG_SEQUENCE_2); - mpt_write(mpt, MPT_OFFSET_SEQUENCE, MPT_DIAG_SEQUENCE_3); - mpt_write(mpt, MPT_OFFSET_SEQUENCE, MPT_DIAG_SEQUENCE_4); - mpt_write(mpt, MPT_OFFSET_SEQUENCE, MPT_DIAG_SEQUENCE_5); - - /* Diag. port is now active so we can now hit the reset bit */ - mpt_write(mpt, MPT_OFFSET_DIAGNOSTIC, MPT_DIAG_RESET_IOC); - - DELAY(10000); - - /* Disable Diagnostic Register */ - mpt_write(mpt, MPT_OFFSET_SEQUENCE, 0xFF); - - /* Restore the config register values */ - /* Hard resets are known to screw up the BAR for diagnostic - memory accesses (Mem1). */ - mpt_set_config_regs(mpt); - if (mpt->mpt2 != NULL) { - mpt_set_config_regs(mpt->mpt2); - } - - /* Note that if there is no valid firmware to run, the doorbell will - remain in the reset state (0x00000000) */ - - /* try to download firmware, if available */ - if (mpt->fw) { - /* wait for the adapter to finish the reset */ - for (count = 0; count < 30; count++) { - diag0 = mpt_read(mpt, MPI_DIAGNOSTIC_OFFSET); - mpt_prt(mpt, "diag0=%08x", diag0); - if (!(diag0 & MPI_DIAG_RESET_ADAPTER)) { - break; - } - - /* wait 1 second */ - DELAY(1000); - } - count = mpt_downloadboot(mpt); - if (count < 0) { - panic("firmware downloadboot failure (%d)!", count); - } - } -} - -/* - * Reset the IOC when needed. Try software command first then if needed - * poke at the magic diagnostic reset. Note that a hard reset resets - * *both* IOCs on dual function chips (FC929 && LSI1030) as well as - * fouls up the PCI configuration registers. - */ -int -mpt_reset(struct mpt_softc *mpt) -{ - int ret; - - /* Try a soft reset */ - if ((ret = mpt_soft_reset(mpt)) != MPT_OK) { - /* Failed; do a hard reset */ - mpt_hard_reset(mpt); - - /* Wait for the IOC to reload and come out of reset state */ - ret = mpt_wait_state(mpt, MPT_DB_STATE_READY); - if (ret != MPT_OK) { - mpt_prt(mpt, "failed to reset device"); - } - } - - return ret; -} - -/* Return a command buffer to the free queue */ -void -mpt_free_request(struct mpt_softc *mpt, struct req_entry *req) -{ - if (req == NULL || req != &mpt->request_pool[req->index]) { - panic("mpt_free_request bad req ptr"); - return; - } - if (req->debug == REQ_FREE) { - /* - * XXX MU this should not happen but do not corrupt the free - * list if it does - */ - mpt_prt(mpt, "request %d already free", req->index); - return; - } - req->sequence = 0; - req->xfer = NULL; - req->debug = REQ_FREE; - SLIST_INSERT_HEAD(&mpt->request_free_list, req, link); -} - -/* Initialize command buffer */ -void -mpt_init_request(struct mpt_softc *mpt, struct req_entry *req) -{ - if (req == NULL || req != &mpt->request_pool[req->index]) { - panic("mpt_init_request bad req ptr"); - return; - } - req->sequence = 0; - req->xfer = NULL; - req->debug = REQ_FREE; - SLIST_INSERT_HEAD(&mpt->request_free_list, req, link); -} -/* Get a command buffer from the free queue */ -struct req_entry * -mpt_get_request(struct mpt_softc *mpt) -{ - struct req_entry *req; - req = SLIST_FIRST(&mpt->request_free_list); - if (req != NULL) { - if (req != &mpt->request_pool[req->index]) { - panic("mpt_get_request: corrupted request free list"); - } - if (req->xfer != NULL) { - panic("mpt_get_request: corrupted request free list " - "(xfer)"); - } - SLIST_REMOVE_HEAD(&mpt->request_free_list, link); - req->debug = REQ_IN_PROGRESS; - } - return req; -} - -/* Pass the command to the IOC */ -void -mpt_send_cmd(struct mpt_softc *mpt, struct req_entry *req) -{ -#ifdef MPT_DEBUG - u_int32_t *pReq = req->req_vbuf; - - DNPRINTF(50, "%s: Send Request %d (0x%x):\n", - DEVNAME(mpt), req->index, req->req_pbuf); - DNPRINTF(50, "%s: %08x %08x %08x %08x\n", - DEVNAME(mpt), pReq[0], pReq[1], pReq[2], pReq[3]); - DNPRINTF(50, "%s: %08x %08x %08x %08x\n", - DEVNAME(mpt), pReq[4], pReq[5], pReq[6], pReq[7]); - DNPRINTF(50, "%s: %08x %08x %08x %08x\n", - DEVNAME(mpt), pReq[8], pReq[9], pReq[10], pReq[11]); - DNPRINTF(50, "%s: %08x %08x %08x %08x\n", - DEVNAME(mpt), pReq[12], pReq[13], pReq[14], pReq[15]); -#endif /* MPT_DEBUG */ - - req->sequence = mpt->sequence++; - MPT_SYNC_REQ(mpt, req, BUS_DMASYNC_PREREAD|BUS_DMASYNC_PREWRITE); - - req->debug = REQ_ON_CHIP; - mpt_write(mpt, MPT_OFFSET_REQUEST_Q, (u_int32_t) req->req_pbuf); -} - -/* - * Give the reply buffer back to the IOC after we have - * finished processing it. - */ -void -mpt_free_reply(struct mpt_softc *mpt, u_int32_t ptr) -{ - mpt_write(mpt, MPT_OFFSET_REPLY_Q, ptr); -} - -/* Get a reply from the IOC */ -u_int32_t -mpt_pop_reply_queue(struct mpt_softc *mpt) -{ - return mpt_read(mpt, MPT_OFFSET_REPLY_Q); -} - -/* - * Send a command to the IOC via the handshake register. - * - * Only done at initialization time and for certain unusual - * commands such as device/bus reset as specified by LSI. - */ -int -mpt_send_handshake_cmd(struct mpt_softc *mpt, size_t len, void *cmd) -{ - int i; - u_int32_t data, *data32; - - /* Check condition of the IOC */ - data = mpt_rd_db(mpt); - if (((MPT_STATE(data) != MPT_DB_STATE_READY) && - (MPT_STATE(data) != MPT_DB_STATE_RUNNING) && - (MPT_STATE(data) != MPT_DB_STATE_FAULT)) || - (MPT_DB_IS_IN_USE(data))) { - mpt_prt(mpt, "handshake aborted due to invalid doorbell state"); -#ifdef MPT_DEBUG - mpt_print_db(data); -#endif /* MPT_DEBUG */ - return(EBUSY); - } - - /* We move things in 32 bit chunks */ - len = (len + 3) >> 2; - data32 = cmd; - - /* Clear any left over pending doorbell interrupts */ - if (MPT_DB_INTR(mpt_rd_intr(mpt))) - mpt_write(mpt, MPT_OFFSET_INTR_STATUS, 0); - - /* - * Tell the handshake reg. we are going to send a command - * and how long it is going to be. - */ - data = (MPI_FUNCTION_HANDSHAKE << MPI_DOORBELL_FUNCTION_SHIFT) | - (len << MPI_DOORBELL_ADD_DWORDS_SHIFT); - mpt_write(mpt, MPT_OFFSET_DOORBELL, data); - - /* Wait for the chip to notice */ - if (mpt_wait_db_int(mpt) != MPT_OK) { - mpt_prt(mpt, "mpt_send_handshake_cmd timeout1"); - return ETIMEDOUT; - } - - /* Clear the interrupt */ - mpt_write(mpt, MPT_OFFSET_INTR_STATUS, 0); - - if (mpt_wait_db_ack(mpt) != MPT_OK) { - mpt_prt(mpt, "mpt_send_handshake_cmd timeout2"); - return ETIMEDOUT; - } - - /* Send the command */ - for (i = 0; i < len; i++) { - mpt_write(mpt, MPT_OFFSET_DOORBELL, *data32++); - if (mpt_wait_db_ack(mpt) != MPT_OK) { - mpt_prt(mpt, - "mpt_send_handshake_cmd timeout! index = %d", i); - return ETIMEDOUT; - } - } - return MPT_OK; -} - -/* Get the response from the handshake register */ -int -mpt_recv_handshake_reply(struct mpt_softc *mpt, size_t reply_len, void *reply) -{ - int left, reply_left; - u_int16_t *data16; - MSG_DEFAULT_REPLY *hdr; - - /* We move things out in 16 bit chunks */ - reply_len >>= 1; - data16 = (u_int16_t *)reply; - - hdr = (MSG_DEFAULT_REPLY *)reply; - - /* Get first word */ - if (mpt_wait_db_int(mpt) != MPT_OK) { - mpt_prt(mpt, "mpt_recv_handshake_cmd timeout1"); - return ETIMEDOUT; - } - *data16++ = mpt_read(mpt, MPT_OFFSET_DOORBELL) & MPT_DB_DATA_MASK; - mpt_write(mpt, MPT_OFFSET_INTR_STATUS, 0); - - /* Get Second Word */ - if (mpt_wait_db_int(mpt) != MPT_OK) { - mpt_prt(mpt, "mpt_recv_handshake_cmd timeout2"); - return ETIMEDOUT; - } - *data16++ = mpt_read(mpt, MPT_OFFSET_DOORBELL) & MPT_DB_DATA_MASK; - mpt_write(mpt, MPT_OFFSET_INTR_STATUS, 0); - -#ifdef MPT_DEBUG - /* With the second word, we can now look at the length */ - if ((reply_len >> 1) != hdr->MsgLength) - /* XXX don't remove brackets! */ - DNPRINTF(50, "%s: reply length does not match message length: " - "got 0x%02x, expected 0x%02x\n", - DEVNAME(mpt), hdr->MsgLength << 2, reply_len << 1); -#endif /* MPT_DEBUG */ - - /* Get rest of the reply; but don't overflow the provided buffer */ - left = (hdr->MsgLength << 1) - 2; - reply_left = reply_len - 2; - while (left--) { - u_int16_t datum; - - if (mpt_wait_db_int(mpt) != MPT_OK) { - mpt_prt(mpt, "mpt_recv_handshake_cmd timeout3"); - return ETIMEDOUT; - } - datum = mpt_read(mpt, MPT_OFFSET_DOORBELL); - - if (reply_left-- > 0) - *data16++ = datum & MPT_DB_DATA_MASK; - - mpt_write(mpt, MPT_OFFSET_INTR_STATUS, 0); - } - - /* One more wait & clear at the end */ - if (mpt_wait_db_int(mpt) != MPT_OK) { - mpt_prt(mpt, "mpt_recv_handshake_cmd timeout4"); - return ETIMEDOUT; - } - mpt_write(mpt, MPT_OFFSET_INTR_STATUS, 0); - - if ((hdr->IOCStatus & MPI_IOCSTATUS_MASK) != MPI_IOCSTATUS_SUCCESS) { -#ifdef MPT_DEBUG - if (mpt_debug > 50) - mpt_print_reply(hdr); -#endif - return (MPT_FAIL | hdr->IOCStatus); - } - - return (0); -} - -int -mpt_get_iocfacts(struct mpt_softc *mpt, MSG_IOC_FACTS_REPLY *freplp) -{ - MSG_IOC_FACTS f_req; - int error; - - bzero(&f_req, sizeof f_req); - f_req.Function = MPI_FUNCTION_IOC_FACTS; - f_req.MsgContext = 0x12071942; - error = mpt_send_handshake_cmd(mpt, sizeof f_req, &f_req); - if (error) - return(error); - error = mpt_recv_handshake_reply(mpt, sizeof (*freplp), freplp); - return (error); -} - -int -mpt_get_portfacts(struct mpt_softc *mpt, MSG_PORT_FACTS_REPLY *freplp) -{ - MSG_PORT_FACTS f_req; - int error; - - /* XXX: Only getting PORT FACTS for Port 0 */ - bzero(&f_req, sizeof f_req); - f_req.Function = MPI_FUNCTION_PORT_FACTS; - f_req.MsgContext = 0x12071943; - error = mpt_send_handshake_cmd(mpt, sizeof f_req, &f_req); - if (error) - return(error); - error = mpt_recv_handshake_reply(mpt, sizeof (*freplp), freplp); - return (error); -} - -/* - * Send the initialization request. This is where we specify how many - * SCSI busses and how many devices per bus we wish to emulate. - * This is also the command that specifies the max size of the reply - * frames from the IOC that we will be allocating. - */ -int -mpt_send_ioc_init(struct mpt_softc *mpt, u_int32_t who) -{ - int error = 0; - MSG_IOC_INIT init; - MSG_IOC_INIT_REPLY reply; - - bzero(&init, sizeof init); - init.WhoInit = who; - init.Function = MPI_FUNCTION_IOC_INIT; - if (mpt->is_fc) { - init.MaxDevices = 255; - } else { - init.MaxDevices = 16; - } - init.MaxBuses = 1; - init.ReplyFrameSize = MPT_REPLY_SIZE; - init.MsgContext = 0x12071941; - - /* - * If we are in a recovery mode and we uploaded the FW image, - * then the fw pointer is not NULL. Skip the upload a second time - * Set this flag if fw set for IOC. - */ - mpt->upload_fw = 0; - - if (mpt->fw_download_boot) { - if (mpt->fw) { - init.Flags = MPI_IOCINIT_FLAGS_DISCARD_FW_IMAGE; - } - else { - mpt->upload_fw = 1; - } - } - - DNPRINTF(10, "%s: flags %d, upload_fw %d\n", DEVNAME(mpt), init.Flags, - mpt->upload_fw); - - if ((error = mpt_send_handshake_cmd(mpt, sizeof init, &init)) != 0) { - return(error); - } - - error = mpt_recv_handshake_reply(mpt, sizeof reply, &reply); - return (error); -} - - -/* - * Utiltity routine to read configuration headers and pages - */ - -int -mpt_read_cfg_header(struct mpt_softc *mpt, int PageType, int PageNumber, - int PageAddress, CONFIG_PAGE_HEADER *rslt) -{ - int count; - struct req_entry *req; - MSG_CONFIG *cfgp; - MSG_CONFIG_REPLY *reply; - - req = mpt_get_request(mpt); - - cfgp = req->req_vbuf; - bzero(cfgp, sizeof *cfgp); - - cfgp->Action = MPI_CONFIG_ACTION_PAGE_HEADER; - cfgp->Function = MPI_FUNCTION_CONFIG; - cfgp->Header.PageNumber = (U8) PageNumber; - cfgp->Header.PageType = (U8) PageType; - cfgp->PageAddress = PageAddress; - MPI_pSGE_SET_FLAGS(((SGE_SIMPLE32 *) &cfgp->PageBufferSGE), - (MPI_SGE_FLAGS_LAST_ELEMENT | MPI_SGE_FLAGS_END_OF_BUFFER | - MPI_SGE_FLAGS_SIMPLE_ELEMENT | MPI_SGE_FLAGS_END_OF_LIST)); - cfgp->MsgContext = req->index | 0x80000000; - - mpt_check_doorbell(mpt); - mpt_send_cmd(mpt, req); - count = 0; - do { - DELAY(500); - mpt_intr(mpt); - if (++count == 1000) { - mpt_prt(mpt, "read_cfg_header timed out"); - return (-1); - } - } while (req->debug == REQ_ON_CHIP); - - reply = (MSG_CONFIG_REPLY *) MPT_REPLY_PTOV(mpt, req->sequence); - if ((reply->IOCStatus & MPI_IOCSTATUS_MASK) != MPI_IOCSTATUS_SUCCESS) { - mpt_prt(mpt, "mpt_read_cfg_header: Config Info Status %x", - reply->IOCStatus); - mpt_free_reply(mpt, (req->sequence << 1)); - return (-1); - } - bcopy(&reply->Header, rslt, sizeof (CONFIG_PAGE_HEADER)); - mpt_free_reply(mpt, (req->sequence << 1)); - mpt_free_request(mpt, req); - return (0); -} - -#define CFG_DATA_OFF 128 - -int -mpt_read_cfg_page(struct mpt_softc *mpt, int PageAddress, CONFIG_PAGE_HEADER *hdr) -{ - int count; - struct req_entry *req; - SGE_SIMPLE32 *se; - MSG_CONFIG *cfgp; - size_t amt; - MSG_CONFIG_REPLY *reply; - - req = mpt_get_request(mpt); - - cfgp = req->req_vbuf; - bzero(cfgp, MPT_REQUEST_AREA); - cfgp->Action = MPI_CONFIG_ACTION_PAGE_READ_CURRENT; - cfgp->Function = MPI_FUNCTION_CONFIG; - cfgp->Header = *hdr; - amt = (cfgp->Header.PageLength * sizeof (u_int32_t)); - cfgp->Header.PageType &= MPI_CONFIG_PAGETYPE_MASK; - cfgp->PageAddress = PageAddress; - se = (SGE_SIMPLE32 *) &cfgp->PageBufferSGE; - se->Address = req->req_pbuf + CFG_DATA_OFF; - MPI_pSGE_SET_LENGTH(se, amt); - MPI_pSGE_SET_FLAGS(se, (MPI_SGE_FLAGS_SIMPLE_ELEMENT | - MPI_SGE_FLAGS_LAST_ELEMENT | MPI_SGE_FLAGS_END_OF_BUFFER | - MPI_SGE_FLAGS_END_OF_LIST)); - - cfgp->MsgContext = req->index | 0x80000000; - - mpt_check_doorbell(mpt); - mpt_send_cmd(mpt, req); - count = 0; - do { - DELAY(500); - mpt_intr(mpt); - if (++count == 1000) { - mpt_prt(mpt, "read_cfg_page timed out"); - return (-1); - } - } while (req->debug == REQ_ON_CHIP); - - reply = (MSG_CONFIG_REPLY *) MPT_REPLY_PTOV(mpt, req->sequence); - if ((reply->IOCStatus & MPI_IOCSTATUS_MASK) != MPI_IOCSTATUS_SUCCESS) { - mpt_prt(mpt, "mpt_read_cfg_page: Config Info Status %x", - reply->IOCStatus); - mpt_free_reply(mpt, (req->sequence << 1)); - return (-1); - } - mpt_free_reply(mpt, (req->sequence << 1)); -#if 0 /* XXXJRT */ - bus_dmamap_sync(mpt->request_dmat, mpt->request_dmap, - BUS_DMASYNC_POSTREAD); -#endif - if (cfgp->Header.PageType == MPI_CONFIG_PAGETYPE_SCSI_PORT && - cfgp->Header.PageNumber == 0) { - amt = sizeof (CONFIG_PAGE_SCSI_PORT_0); - } else if (cfgp->Header.PageType == MPI_CONFIG_PAGETYPE_SCSI_PORT && - cfgp->Header.PageNumber == 1) { - amt = sizeof (CONFIG_PAGE_SCSI_PORT_1); - } else if (cfgp->Header.PageType == MPI_CONFIG_PAGETYPE_SCSI_PORT && - cfgp->Header.PageNumber == 2) { - amt = sizeof (CONFIG_PAGE_SCSI_PORT_2); - } else if (cfgp->Header.PageType == MPI_CONFIG_PAGETYPE_SCSI_DEVICE && - cfgp->Header.PageNumber == 0) { - amt = sizeof (CONFIG_PAGE_SCSI_DEVICE_0); - } else if (cfgp->Header.PageType == MPI_CONFIG_PAGETYPE_SCSI_DEVICE && - cfgp->Header.PageNumber == 1) { - amt = sizeof (CONFIG_PAGE_SCSI_DEVICE_1); - } else if (cfgp->Header.PageType == MPI_CONFIG_PAGETYPE_MANUFACTURING && - cfgp->Header.PageNumber == 0) { - amt = sizeof (CONFIG_PAGE_MANUFACTURING_0); - } else if (cfgp->Header.PageType == MPI_CONFIG_PAGETYPE_IOC && - cfgp->Header.PageNumber == 2) { - amt = sizeof (CONFIG_PAGE_IOC_2); - } else if (cfgp->Header.PageType == MPI_CONFIG_PAGETYPE_RAID_VOLUME && - cfgp->Header.PageNumber == 0) { - amt = sizeof (CONFIG_PAGE_RAID_VOL_0); - } else if (cfgp->Header.PageType == MPI_CONFIG_PAGETYPE_RAID_PHYSDISK && - cfgp->Header.PageNumber == 0) { - amt = sizeof (CONFIG_PAGE_RAID_PHYS_DISK_0); - } - - bcopy(((caddr_t)req->req_vbuf)+CFG_DATA_OFF, hdr, amt); - mpt_free_request(mpt, req); - return (0); -} - -int -mpt_write_cfg_page(struct mpt_softc *mpt, int PageAddress, CONFIG_PAGE_HEADER *hdr) -{ - int count, hdr_attr; - struct req_entry *req; - SGE_SIMPLE32 *se; - MSG_CONFIG *cfgp; - size_t amt; - MSG_CONFIG_REPLY *reply; - - req = mpt_get_request(mpt); - - cfgp = req->req_vbuf; - bzero(cfgp, sizeof *cfgp); - - hdr_attr = hdr->PageType & MPI_CONFIG_PAGEATTR_MASK; - if (hdr_attr != MPI_CONFIG_PAGEATTR_CHANGEABLE && - hdr_attr != MPI_CONFIG_PAGEATTR_PERSISTENT) { - mpt_prt(mpt, "page type 0x%x not changeable", - hdr->PageType & MPI_CONFIG_PAGETYPE_MASK); - return (-1); - } - hdr->PageType &= MPI_CONFIG_PAGETYPE_MASK; - - cfgp->Action = MPI_CONFIG_ACTION_PAGE_WRITE_CURRENT; - cfgp->Function = MPI_FUNCTION_CONFIG; - cfgp->Header = *hdr; - amt = (cfgp->Header.PageLength * sizeof (u_int32_t)); - cfgp->PageAddress = PageAddress; - - se = (SGE_SIMPLE32 *) &cfgp->PageBufferSGE; - se->Address = req->req_pbuf + CFG_DATA_OFF; - MPI_pSGE_SET_LENGTH(se, amt); - MPI_pSGE_SET_FLAGS(se, (MPI_SGE_FLAGS_SIMPLE_ELEMENT | - MPI_SGE_FLAGS_LAST_ELEMENT | MPI_SGE_FLAGS_END_OF_BUFFER | - MPI_SGE_FLAGS_END_OF_LIST | MPI_SGE_FLAGS_HOST_TO_IOC)); - - cfgp->MsgContext = req->index | 0x80000000; - - if (cfgp->Header.PageType == MPI_CONFIG_PAGETYPE_SCSI_PORT && - cfgp->Header.PageNumber == 0) { - amt = sizeof (CONFIG_PAGE_SCSI_PORT_0); - } else if (cfgp->Header.PageType == MPI_CONFIG_PAGETYPE_SCSI_PORT && - cfgp->Header.PageNumber == 1) { - amt = sizeof (CONFIG_PAGE_SCSI_PORT_1); - } else if (cfgp->Header.PageType == MPI_CONFIG_PAGETYPE_SCSI_PORT && - cfgp->Header.PageNumber == 2) { - amt = sizeof (CONFIG_PAGE_SCSI_PORT_2); - } else if (cfgp->Header.PageType == MPI_CONFIG_PAGETYPE_SCSI_DEVICE && - cfgp->Header.PageNumber == 0) { - amt = sizeof (CONFIG_PAGE_SCSI_DEVICE_0); - } else if (cfgp->Header.PageType == MPI_CONFIG_PAGETYPE_SCSI_DEVICE && - cfgp->Header.PageNumber == 1) { - amt = sizeof (CONFIG_PAGE_SCSI_DEVICE_1); - } - bcopy(hdr, ((caddr_t)req->req_vbuf)+CFG_DATA_OFF, amt); - /* Restore stripped out attributes */ - hdr->PageType |= hdr_attr; - - mpt_check_doorbell(mpt); - mpt_send_cmd(mpt, req); - count = 0; - do { - DELAY(500); - mpt_intr(mpt); - if (++count == 1000) { - hdr->PageType |= hdr_attr; - mpt_prt(mpt, "mpt_write_cfg_page timed out"); - return (-1); - } - } while (req->debug == REQ_ON_CHIP); - - reply = (MSG_CONFIG_REPLY *) MPT_REPLY_PTOV(mpt, req->sequence); - if ((reply->IOCStatus & MPI_IOCSTATUS_MASK) != MPI_IOCSTATUS_SUCCESS) { - mpt_prt(mpt, "mpt_write_cfg_page: Config Info Status %x", - reply->IOCStatus); - mpt_free_reply(mpt, (req->sequence << 1)); - return (-1); - } - mpt_free_reply(mpt, (req->sequence << 1)); - - mpt_free_request(mpt, req); - return (0); -} - -#ifdef MPT_DEBUG -void -mpt_print_header(struct mpt_softc *mpt, char *s, CONFIG_PAGE_HEADER *phdr) -{ - DNPRINTF(10,"%s: %s %x: %x %x %x %x\n", - DEVNAME(mpt), - s, - phdr->PageNumber, - phdr->PageType, - phdr->PageNumber, - phdr->PageLength, - phdr->PageVersion); -} -#endif /* MPT_DEBUG */ - -/* - * Read manufacturing configuration information - */ -int -mpt_read_config_info_mfg(struct mpt_softc *mpt) -{ - int rv, i; - CONFIG_PAGE_HEADER *phdr[5] = { - phdr[0] = &mpt->mpt_mfg_page0.Header, - phdr[1] = &mpt->mpt_mfg_page1.Header, - phdr[2] = &mpt->mpt_mfg_page2.Header, - phdr[3] = &mpt->mpt_mfg_page3.Header, - phdr[4] = &mpt->mpt_mfg_page4.Header - }; - - for (i = 0; i < 5 /* 5 pages total */; i++) { - /* retrieve MFG headers */ - rv = mpt_read_cfg_header(mpt, - MPI_CONFIG_PAGETYPE_MANUFACTURING, i, 0, phdr[i]); - if (rv) { - mpt_prt(mpt, "Could not retrieve Manufacturing Page " - "%i Header.", i); - return (-1); - } -#ifdef MPT_DEBUG - mpt_print_header(mpt, "Manufacturing Header Page", phdr[i]); -#endif /* MPT_DEBUG */ - - /* retrieve MFG config pages using retrieved headers */ - rv = mpt_read_cfg_page(mpt, i, phdr[i]); - if (rv) { - mpt_prt(mpt, "Could not retrieve manufacturing Page" - " %i", i); - return (-1); - } - } - -#ifdef MPT_DEBUG - if (mpt_debug > 10) { - mpt_prt(mpt, "Manufacturing Page 0 data: %s %s %s %s %s", - mpt->mpt_mfg_page0.ChipName, - mpt->mpt_mfg_page0.ChipRevision, - mpt->mpt_mfg_page0.BoardName, - mpt->mpt_mfg_page0.BoardAssembly, - mpt->mpt_mfg_page0.BoardTracerNumber); - - mpt_prt(mpt, "Manufacturing Page 1 data:"); - for (i = 0; - i < ((mpt->mpt_mfg_page1.Header.PageLength - 1)<< 2); i++) { - printf("%02x ", mpt->mpt_mfg_page1.VPD[i]); - } - printf("\n"); - - mpt_prt(mpt, "Manufacturing Page 2 data: %x %x", - mpt->mpt_mfg_page2.ChipId.PCIRevisionID, - mpt->mpt_mfg_page2.ChipId.DeviceID); - for (i = 0; - i < (mpt->mpt_mfg_page2.Header.PageLength - 2); i++) { - printf("%08x ", mpt->mpt_mfg_page2.HwSettings[i]); - } - printf("\n"); - - mpt_prt(mpt, "Manufacturing Page 3 data: %x %x", - mpt->mpt_mfg_page3.ChipId.PCIRevisionID, - mpt->mpt_mfg_page3.ChipId.DeviceID); - for (i = 0; - i < (mpt->mpt_mfg_page3.Header.PageLength - 2); i++) { - printf("%08x ", mpt->mpt_mfg_page3.Info[i]); - } - printf("\n"); - - mpt_prt(mpt, "Manufacturing Page 4 data: %x %x %x %x %x", - mpt->mpt_mfg_page4.InfoSize1, - mpt->mpt_mfg_page4.InfoOffset1, - mpt->mpt_mfg_page4.InfoSize0, - mpt->mpt_mfg_page4.InfoOffset0, - mpt->mpt_mfg_page4.InquirySize, - mpt->mpt_mfg_page4.ISVolumeSettings, - mpt->mpt_mfg_page4.IMEVolumeSettings, - mpt->mpt_mfg_page4.IMVolumeSettings); - for (i = 0; i < sizeof(mpt->mpt_mfg_page4.InquiryData); i++) { - printf("%02x ", mpt->mpt_mfg_page4.InquiryData[i]); - } - printf("\n"); - } -#endif /* MPT_DEBUG */ - - return (0); -} - -/* - * Read IO Unit configuration information - */ -int -mpt_read_config_info_iou(struct mpt_softc *mpt) -{ - int rv, i; - - CONFIG_PAGE_HEADER *phdr[4] = { - phdr[0] = &mpt->mpt_iou_page0.Header, - phdr[1] = &mpt->mpt_iou_page1.Header, - phdr[2] = &mpt->mpt_iou_page2.Header, - phdr[3] = &mpt->mpt_iou_page2.Header, - }; - - for (i = 0; i < 4 /* 4 pages total */; i++) { - /* retrieve IO Unit headers */ - rv = mpt_read_cfg_header(mpt, MPI_CONFIG_PAGETYPE_IO_UNIT, i, - 0, phdr[i]); - if (rv) { - mpt_prt(mpt, "Could not retrieve IO Unit Page %i " - "header.", i); - return (-1); - } -#ifdef MPT_DEBUG - mpt_print_header(mpt, "IO Unit Header Page", phdr[i]); -#endif /* MPT_DEBUG */ - - /* retrieve IO Unit config pages using retrieved headers */ - rv = mpt_read_cfg_page(mpt, i, phdr[i]); - if (rv) { - mpt_prt(mpt, "Could not retrieve IO Unit Page %i", i); - return (-1); - } - - if (i == 0 && - mpt->mpt_iou_page0.UniqueValue.High == 0xdeadbeef && - mpt->mpt_iou_page0.UniqueValue.Low == 0xdeadbeef) - { - /* vmware returns a lot of dead beef in page 0 */ - mpt->vmware = 1; - } - } - - DNPRINTF(10, "%s: IO Unit Page 0 data: %llx\n", - DEVNAME(mpt), - mpt->mpt_iou_page0.UniqueValue); - DNPRINTF(10, "%s: IO Unit Page 1 data: %x\n", - DEVNAME(mpt), - mpt->mpt_iou_page1.Flags); - DNPRINTF(10, "%s: IO Unit Page 2 data: %x %x %x %x %x %x\n", - DEVNAME(mpt), - mpt->mpt_iou_page2.Flags, - mpt->mpt_iou_page2.BiosVersion, - mpt->mpt_iou_page2.AdapterOrder[0], - mpt->mpt_iou_page2.AdapterOrder[1], - mpt->mpt_iou_page2.AdapterOrder[2], - mpt->mpt_iou_page2.AdapterOrder[3]); - - return (0); -} - -/* - * Read IOC configuration information - */ -int -mpt_read_config_info_ioc(struct mpt_softc *mpt) -{ - int rv, i; - CONFIG_PAGE_HEADER *phdr[5] = { - phdr[0] = &mpt->mpt_ioc_page0.Header, - phdr[1] = &mpt->mpt_ioc_page1.Header, - phdr[2] = &mpt->mpt_ioc_page2.Header, - phdr[3] = &mpt->mpt_ioc_page3.Header, - phdr[4] = &mpt->mpt_ioc_page4.Header - }; - - for (i = 0; i < 5 /* 5 pages total */; i++) { - /* retrieve IOC headers */ - rv = mpt_read_cfg_header(mpt, MPI_CONFIG_PAGETYPE_IOC, i, - 0, phdr[i]); - if (rv) { - mpt_prt(mpt, "Could not retrieve IOC Page %i header.", - i); - return (-1); - } -#ifdef MPT_DEBUG - mpt_print_header(mpt, "IOC Header Page", phdr[i]); -#endif /* MPT_DEBUG */ - - /* retrieve IOC config pages using retrieved headers */ - rv = mpt_read_cfg_page(mpt, i, phdr[i]); - if (rv) { - mpt_prt(mpt, "Could not retrieve IOC Page %i", i); - return (-1); - } - } - -#ifdef MPT_DEBUG - if (mpt_debug > 10) { - mpt_prt(mpt, "IOC Page 0 data: %x %x %x %x %x %x %x %x", - mpt->mpt_ioc_page0.TotalNVStore, - mpt->mpt_ioc_page0.FreeNVStore, - mpt->mpt_ioc_page0.DeviceID, - mpt->mpt_ioc_page0.VendorID, - mpt->mpt_ioc_page0.RevisionID, - mpt->mpt_ioc_page0.ClassCode, - mpt->mpt_ioc_page0.SubsystemID, - mpt->mpt_ioc_page0.SubsystemVendorID - ); - - mpt_prt(mpt, "IOC Page 1 data: %x %x %x", - mpt->mpt_ioc_page1.Flags, - mpt->mpt_ioc_page1.CoalescingTimeout, - mpt->mpt_ioc_page1.CoalescingDepth); - - mpt_prt(mpt, "IOC Page 2 data: %x %x %x %x %x", - mpt->mpt_ioc_page2.CapabilitiesFlags, - mpt->mpt_ioc_page2.MaxPhysDisks, - mpt->mpt_ioc_page2.NumActivePhysDisks, - mpt->mpt_ioc_page2.MaxVolumes, - mpt->mpt_ioc_page2.NumActiveVolumes); - - /* FIXME: move this to attach */ - if (mpt->mpt_ioc_page2.MaxVolumes > - MPI_IOC_PAGE_2_RAID_VOLUME_MAX) { - /* complain */ - } - for (i = 0; i < mpt->mpt_ioc_page2.MaxVolumes; i++) { - mpt_prt(mpt, "IOC Page 2 RAID Volume %x %x %x %x %x", - mpt->mpt_ioc_page2.RaidVolume[i].VolumeType, - mpt->mpt_ioc_page2.RaidVolume[i].VolumePageNumber, - mpt->mpt_ioc_page2.RaidVolume[i].VolumeIOC, - mpt->mpt_ioc_page2.RaidVolume[i].VolumeBus, - mpt->mpt_ioc_page2.RaidVolume[i].VolumeID); - } - - mpt_prt(mpt, "IOC Page 3 data: %x ", - mpt->mpt_ioc_page3.NumPhysDisks); - - for (i = 0; i < mpt->mpt_ioc_page3.NumPhysDisks; i++) { - mpt_prt(mpt, "IOC Page 3 Physical Disk: %x %x %x %x", - mpt->mpt_ioc_page3.PhysDisk[i].PhysDiskNum, - mpt->mpt_ioc_page3.PhysDisk[i].PhysDiskIOC, - mpt->mpt_ioc_page3.PhysDisk[i].PhysDiskBus, - mpt->mpt_ioc_page3.PhysDisk[i].PhysDiskID); - } - - mpt_prt(mpt, "IOC Page 4 data: %x %x", - mpt->mpt_ioc_page4.MaxSEP, - mpt->mpt_ioc_page4.ActiveSEP); - - for (i = 0; i < mpt->mpt_ioc_page4.MaxSEP; i++) { - mpt_prt(mpt, "IOC Page 4 SEP: %x %x", - mpt->mpt_ioc_page4.SEP[i].SEPTargetID, - mpt->mpt_ioc_page4.SEP[i].SEPBus); - } - } -#endif /* MPT_DEBUG */ - - return (0); -} - -/* - * Read RAID Volume pages - */ -int -mpt_read_config_info_raid(struct mpt_softc *mpt) -{ - int rv; - - /* retrieve raid volume headers */ - rv = mpt_read_cfg_header(mpt, MPI_CONFIG_PAGETYPE_RAID_VOLUME, 0, - 0, &mpt->mpt_raidvol_page0.Header); - if (rv) { - mpt_prt(mpt, "Could not retrieve RAID Volume Page 0 Header"); - return (-1); - } -#ifdef MPT_DEBUG - mpt_print_header(mpt, "RAID Volume Header Page", - &mpt->mpt_raidvol_page0.Header); -#endif /* MPT_DEBUG */ - - /* retrieve raid volume page using retrieved headers */ - rv = mpt_read_cfg_page(mpt, 0, &mpt->mpt_raidvol_page0.Header); - if (rv) { - mpt_prt(mpt, "Could not retrieve RAID Volume Page 0"); - return (-1); - } - - /* retrieve raid physical disk header */ - rv = mpt_read_cfg_header(mpt, MPI_CONFIG_PAGETYPE_RAID_PHYSDISK, 0, - 0, &mpt->mpt_raidphys_page0.Header); - if (rv) { - mpt_prt(mpt, "Could not retrieve RAID Phys Disk Page 0 Header"); - return (-1); - } -#ifdef MPT_DEBUG - mpt_print_header(mpt, "RAID Volume Physical Disk Page", - &mpt->mpt_raidphys_page0.Header); -#endif /* MPT_DEBUG */ - - /* retrieve raid physical disk page using retrieved headers */ - rv = mpt_read_cfg_page(mpt, 0, &mpt->mpt_raidphys_page0.Header); - if (rv) { - mpt_prt(mpt, "Could not retrieve RAID Phys Disk Page 0"); - return (-1); - } - -#ifdef MPT_DEBUG - int i; - if (mpt_debug > 10) { - mpt_prt(mpt, "RAID Volume Page 0 data: %x %x %x %x %x" - "%x %x %x %x", - mpt->mpt_raidvol_page0.VolumeType, - mpt->mpt_raidvol_page0.VolumeIOC, - mpt->mpt_raidvol_page0.VolumeBus, - mpt->mpt_raidvol_page0.VolumeID, - mpt->mpt_raidvol_page0.VolumeStatus, - mpt->mpt_raidvol_page0.VolumeSettings, - mpt->mpt_raidvol_page0.MaxLBA, - mpt->mpt_raidvol_page0.StripeSize, - mpt->mpt_raidvol_page0.NumPhysDisks); - - for (i = 0; i < mpt->mpt_raidvol_page0.NumPhysDisks; i++) { - mpt_prt(mpt, "RAID Volume Page 0 Physical Disk: %x %x", - mpt->mpt_raidvol_page0.PhysDisk[i].PhysDiskNum, - mpt->mpt_raidvol_page0.PhysDisk[i].PhysDiskMap); - } - printf("\n"); - - mpt_prt(mpt, "RAID Phyical Disk Page 0 data: %x %x %x %x %x" - "%x %x %x", - mpt->mpt_raidphys_page0.PhysDiskNum, - mpt->mpt_raidphys_page0.PhysDiskIOC, - mpt->mpt_raidphys_page0.PhysDiskBus, - mpt->mpt_raidphys_page0.PhysDiskID, - mpt->mpt_raidphys_page0.PhysDiskSettings.SepID, - mpt->mpt_raidphys_page0.PhysDiskSettings.SepBus, - mpt->mpt_raidphys_page0.PhysDiskSettings.HotSparePool, - mpt->mpt_raidphys_page0.PhysDiskSettings.PhysDiskSettings); - - for (i = 0; - i < sizeof(mpt->mpt_raidphys_page0.DiskIdentifier); i++) { - printf("%02x ", - mpt->mpt_raidphys_page0.DiskIdentifier[i]); - } - - /* does them all */ - printf("\n"); - mpt_prt(mpt, "RAID Phyical Disk Page 0 data: %s", - mpt->mpt_raidphys_page0.InquiryData.VendorID); - - for (i = 0; - i < sizeof(mpt->mpt_raidphys_page0.InquiryData.Info); i++) { - printf("%02x ", - mpt->mpt_raidphys_page0.InquiryData.Info[i]); - } - - printf("\n"); - mpt_prt(mpt, "RAID Phyical Disk Page 0 data: %x %x %x" - "%x %x %x %x %x %x %x %x", - mpt->mpt_raidphys_page0.PhysDiskStatus.Flags, - mpt->mpt_raidphys_page0.PhysDiskStatus.State, - mpt->mpt_raidphys_page0.MaxLBA, - mpt->mpt_raidphys_page0.ErrorData.ErrorSenseKey, - mpt->mpt_raidphys_page0.ErrorData.ErrorCdbByte, - mpt->mpt_raidphys_page0.ErrorData.ErrorASCQ, - mpt->mpt_raidphys_page0.ErrorData.ErrorASC, - mpt->mpt_raidphys_page0.ErrorData.ErrorCount, - mpt->mpt_raidphys_page0.ErrorData.SmartASCQ, - mpt->mpt_raidphys_page0.ErrorData.SmartASC, - mpt->mpt_raidphys_page0.ErrorData.SmartCount - ); - } -#endif /* MPT_DEBUG */ - - return (0); -} - -/* - * Read SCSI configuration information - */ -int -mpt_read_config_info_spi(struct mpt_softc *mpt) -{ - int rv, i; - - rv = mpt_read_cfg_header(mpt, MPI_CONFIG_PAGETYPE_SCSI_PORT, 0, - 0, &mpt->mpt_port_page0.Header); - if (rv) - return (-1); - - DNPRINTF(10, "%s: SPI Port Page 0 Header: %x %x %x %x\n", - DEVNAME(mpt), - mpt->mpt_port_page0.Header.PageVersion, - mpt->mpt_port_page0.Header.PageLength, - mpt->mpt_port_page0.Header.PageNumber, - mpt->mpt_port_page0.Header.PageType); - - rv = mpt_read_cfg_header(mpt, MPI_CONFIG_PAGETYPE_SCSI_PORT, 1, - 0, &mpt->mpt_port_page1.Header); - if (rv) - return (-1); - - DNPRINTF(10, "%s: SPI Port Page 1 Header: %x %x %x %x\n", - DEVNAME(mpt), - mpt->mpt_port_page1.Header.PageVersion, - mpt->mpt_port_page1.Header.PageLength, - mpt->mpt_port_page1.Header.PageNumber, - mpt->mpt_port_page1.Header.PageType); - - rv = mpt_read_cfg_header(mpt, MPI_CONFIG_PAGETYPE_SCSI_PORT, 2, - 0, &mpt->mpt_port_page2.Header); - if (rv) - return (-1); - - DNPRINTF(10, "%s: SPI Port Page 2 Header: %x %x %x %x\n", - DEVNAME(mpt), - mpt->mpt_port_page1.Header.PageVersion, - mpt->mpt_port_page1.Header.PageLength, - mpt->mpt_port_page1.Header.PageNumber, - mpt->mpt_port_page1.Header.PageType); - - for (i = 0; i < 16; i++) { - rv = mpt_read_cfg_header(mpt, MPI_CONFIG_PAGETYPE_SCSI_DEVICE, - 0, i, &mpt->mpt_dev_page0[i].Header); - if (rv) { - return (-1); - } - DNPRINTF(10, - "%s: SPI Target %d Device Page 0 Header: %x %x %x %x\n", - DEVNAME(mpt), - i, mpt->mpt_dev_page0[i].Header.PageVersion, - mpt->mpt_dev_page0[i].Header.PageLength, - mpt->mpt_dev_page0[i].Header.PageNumber, - mpt->mpt_dev_page0[i].Header.PageType); - - rv = mpt_read_cfg_header(mpt, MPI_CONFIG_PAGETYPE_SCSI_DEVICE, - 1, i, &mpt->mpt_dev_page1[i].Header); - if (rv) { - return (-1); - } - DNPRINTF(10, - "%s: SPI Target %d Device Page 1 Header: %x %x %x %x\n", - DEVNAME(mpt), - i, mpt->mpt_dev_page1[i].Header.PageVersion, - mpt->mpt_dev_page1[i].Header.PageLength, - mpt->mpt_dev_page1[i].Header.PageNumber, - mpt->mpt_dev_page1[i].Header.PageType); - } - - /* - * At this point, we don't *have* to fail. As long as we have - * valid config header information, we can (barely) lurch - * along. - */ - - rv = mpt_read_cfg_page(mpt, 0, &mpt->mpt_port_page0.Header); - if (rv) { - mpt_prt(mpt, "failed to read SPI Port Page 0"); - } else - DNPRINTF(10, - "%s: SPI Port Page 0: Capabilities %x PhysicalInterface %x\n", - DEVNAME(mpt), - mpt->mpt_port_page0.Capabilities, - mpt->mpt_port_page0.PhysicalInterface); - - rv = mpt_read_cfg_page(mpt, 0, &mpt->mpt_port_page1.Header); - if (rv) { - mpt_prt(mpt, "failed to read SPI Port Page 1"); - } else - DNPRINTF(10, - "%s: SPI Port Page 1: Configuration %x OnBusTimerValue %x\n", - DEVNAME(mpt), - mpt->mpt_port_page1.Configuration, - mpt->mpt_port_page1.OnBusTimerValue); - - rv = mpt_read_cfg_page(mpt, 0, &mpt->mpt_port_page2.Header); - if (rv) { - mpt_prt(mpt, "failed to read SPI Port Page 2"); - } else { - DNPRINTF(10, - "%s: SPI Port Page 2: Flags %x Settings %x\n", - DEVNAME(mpt), - mpt->mpt_port_page2.PortFlags, - mpt->mpt_port_page2.PortSettings); - for (i = 0; i < 16; i++) - DNPRINTF(10, - "%s: SPI Port Page 2 Tgt %d: timo %x SF %x Flags %x\n", - DEVNAME(mpt), - i, mpt->mpt_port_page2.DeviceSettings[i].Timeout, - mpt->mpt_port_page2.DeviceSettings[i].SyncFactor, - mpt->mpt_port_page2.DeviceSettings[i].DeviceFlags); - } - - for (i = 0; i < 16; i++) { - rv = mpt_read_cfg_page(mpt, i, &mpt->mpt_dev_page0[i].Header); - if (rv) { - mpt_prt(mpt, "cannot read SPI Tgt %d Device Page 0", i); - continue; - } - DNPRINTF(10, - "%s: SPI Tgt %d Page 0: NParms %x Information %x\n", - DEVNAME(mpt), - i, mpt->mpt_dev_page0[i].NegotiatedParameters, - mpt->mpt_dev_page0[i].Information); - - rv = mpt_read_cfg_page(mpt, i, &mpt->mpt_dev_page1[i].Header); - if (rv) { - mpt_prt(mpt, "cannot read SPI Tgt %d Device Page 1", i); - continue; - } - - DNPRINTF(10, - "%s: SPI Tgt %d Page 1: RParms %x Configuration %x\n", - DEVNAME(mpt), - i, mpt->mpt_dev_page1[i].RequestedParameters, - mpt->mpt_dev_page1[i].Configuration); - } - return (0); -} - -/* - * Validate SPI configuration information. - * - * In particular, validate SPI Port Page 1. - */ -int -mpt_set_initial_config_spi(struct mpt_softc *mpt) -{ - int i, pp1val = ((1 << mpt->mpt_ini_id) << 16) | mpt->mpt_ini_id; - - mpt->mpt_disc_enable = 0xff; - mpt->mpt_tag_enable = 0; - - if (mpt->mpt_port_page1.Configuration != pp1val) { - CONFIG_PAGE_SCSI_PORT_1 tmp; - mpt_prt(mpt, - "SPI Port Page 1 Config value bad (%x)- should be %x", - mpt->mpt_port_page1.Configuration, pp1val); - tmp = mpt->mpt_port_page1; - tmp.Configuration = pp1val; - if (mpt_write_cfg_page(mpt, 0, &tmp.Header)) { - return (-1); - } - if (mpt_read_cfg_page(mpt, 0, &tmp.Header)) { - return (-1); - } - if (tmp.Configuration != pp1val) { - mpt_prt(mpt, - "failed to reset SPI Port Page 1 Config value"); - return (-1); - } - mpt->mpt_port_page1 = tmp; - } - - for (i = 0; i < 16; i++) { - CONFIG_PAGE_SCSI_DEVICE_1 tmp; - tmp = mpt->mpt_dev_page1[i]; - tmp.RequestedParameters = 0; - tmp.Configuration = 0; - DNPRINTF(10, - "%s: Set Tgt %d SPI DevicePage 1 values to %x 0 %x\n", - DEVNAME(mpt), - i, tmp.RequestedParameters, tmp.Configuration); - - if (mpt_write_cfg_page(mpt, i, &tmp.Header)) - return (-1); - - if (mpt_read_cfg_page(mpt, i, &tmp.Header)) - return (-1); - - mpt->mpt_dev_page1[i] = tmp; - DNPRINTF(10, - "%s: SPI Tgt %d Page 1: RParm %x Configuration %x\n", - DEVNAME(mpt), - i, - mpt->mpt_dev_page1[i].RequestedParameters, - mpt->mpt_dev_page1[i].Configuration); - } - return (0); -} - -/* - * Enable IOC port - */ -int -mpt_send_port_enable(struct mpt_softc *mpt, int port) -{ - int count; - struct req_entry *req; - MSG_PORT_ENABLE *enable_req; - - req = mpt_get_request(mpt); - - enable_req = req->req_vbuf; - bzero(enable_req, sizeof *enable_req); - - enable_req->Function = MPI_FUNCTION_PORT_ENABLE; - enable_req->MsgContext = req->index | 0x80000000; - enable_req->PortNumber = port; - - mpt_check_doorbell(mpt); - DNPRINTF(10, "%s: enabling port %d\n", DEVNAME(mpt), port); - - mpt_send_cmd(mpt, req); - - count = 0; - do { - DELAY(500); - mpt_intr(mpt); - if (++count == 100000) { - mpt_prt(mpt, "port enable timed out"); - return (-1); - } - } while (req->debug == REQ_ON_CHIP); - mpt_free_request(mpt, req); - return (0); -} - -/* - * Enable/Disable asynchronous event reporting. - * - * NB: this is the first command we send via shared memory - * instead of the handshake register. - */ -int -mpt_send_event_request(struct mpt_softc *mpt, int onoff) -{ - struct req_entry *req; - MSG_EVENT_NOTIFY *enable_req; - - req = mpt_get_request(mpt); - - enable_req = req->req_vbuf; - bzero(enable_req, sizeof *enable_req); - - enable_req->Function = MPI_FUNCTION_EVENT_NOTIFICATION; - enable_req->MsgContext = req->index | 0x80000000; - enable_req->Switch = onoff; - - mpt_check_doorbell(mpt); - DNPRINTF(10, "%s: %sabling async events\n", - DEVNAME(mpt), onoff? "en" : "dis"); - mpt_send_cmd(mpt, req); - - return (0); -} - -/* - * Un-mask the interrupts on the chip. - */ -void -mpt_enable_ints(struct mpt_softc *mpt) -{ - /* Unmask every thing except door bell int */ - mpt_write(mpt, MPT_OFFSET_INTR_MASK, MPT_INTR_DB_MASK); -} - -/* - * Mask the interrupts on the chip. - */ -void -mpt_disable_ints(struct mpt_softc *mpt) -{ - /* Mask all interrupts */ - mpt_write(mpt, MPT_OFFSET_INTR_MASK, - MPT_INTR_REPLY_MASK | MPT_INTR_DB_MASK); -} - -/* (Re)Initialize the chip for use */ -int -mpt_init(struct mpt_softc *mpt, u_int32_t who) -{ - int try; - MSG_IOC_FACTS_REPLY facts; - MSG_PORT_FACTS_REPLY pfp; - u_int32_t pptr; - int val; - - /* Put all request buffers (back) on the free list */ - SLIST_INIT(&mpt->request_free_list); - for (val = 0; val < MPT_MAX_REQUESTS(mpt); val++) { - mpt_init_request(mpt, &mpt->request_pool[val]); - } - - DNPRINTF(10, "%s: doorbell req = %s\n", - DEVNAME(mpt), - mpt_ioc_diag(mpt_read(mpt, MPT_OFFSET_DOORBELL))); - - /* - * Start by making sure we're not at FAULT or RESET state - */ - switch (mpt_rd_db(mpt) & MPT_DB_STATE_MASK) { - case MPT_DB_STATE_RESET: - case MPT_DB_STATE_FAULT: - if (mpt_reset(mpt) != MPT_OK) { - return (EIO); - } - default: - break; - } - - for (try = 0; try < MPT_MAX_TRIES; try++) { - /* - * No need to reset if the IOC is already in the READY state. - * - * Force reset if initialization failed previously. - * Note that a hard_reset of the second channel of a '929 - * will stop operation of the first channel. Hopefully, if the - * first channel is ok, the second will not require a hard - * reset. - */ - if ((mpt_rd_db(mpt) & MPT_DB_STATE_MASK) != - MPT_DB_STATE_READY) { - if (mpt_reset(mpt) != MPT_OK) { - DELAY(10000); - continue; - } - } - - if (mpt_get_iocfacts(mpt, &facts) != MPT_OK) { - mpt_prt(mpt, "mpt_get_iocfacts failed"); - continue; - } - - DNPRINTF(10, - "%s: IOCFACTS: GlobalCredits=%d BlockSize=%u " - "Request Frame Size %u\n", - DEVNAME(mpt), facts.GlobalCredits, - facts.BlockSize, facts.RequestFrameSize); - - mpt->mpt_global_credits = facts.GlobalCredits; - mpt->request_frame_size = facts.RequestFrameSize; - - /* save the firmware upload required flag */ - mpt->fw_download_boot = facts.Flags - & MPI_IOCFACTS_FLAGS_FW_DOWNLOAD_BOOT; - - mpt->fw_image_size = facts.FWImageSize; - - if (mpt_get_portfacts(mpt, &pfp) != MPT_OK) { - mpt_prt(mpt, "mpt_get_portfacts failed"); - continue; - } - - DNPRINTF(10, - "%s: PORTFACTS: Type %x PFlags %x IID %d MaxDev %d\n", - DEVNAME(mpt), - pfp.PortType, pfp.ProtocolFlags, pfp.PortSCSIID, - pfp.MaxDevices); - - if (pfp.PortType != MPI_PORTFACTS_PORTTYPE_SCSI && - pfp.PortType != MPI_PORTFACTS_PORTTYPE_FC) { - mpt_prt(mpt, "Unsupported Port Type (%x)", - pfp.PortType); - return (ENXIO); - } - if (!(pfp.ProtocolFlags & MPI_PORTFACTS_PROTOCOL_INITIATOR)) { - mpt_prt(mpt, "initiator role unsupported"); - return (ENXIO); - } - if (pfp.PortType == MPI_PORTFACTS_PORTTYPE_FC) { - mpt->is_fc = 1; - } else { - mpt->is_fc = 0; - } - mpt->mpt_ini_id = pfp.PortSCSIID; - - if (mpt_send_ioc_init(mpt, who) != MPT_OK) { - mpt_prt(mpt, "mpt_send_ioc_init failed"); - continue; - } - - DNPRINTF(10, "%s: mpt_send_ioc_init ok\n", DEVNAME(mpt)); - - if (mpt_wait_state(mpt, MPT_DB_STATE_RUNNING) != MPT_OK) { - mpt_prt(mpt, "IOC failed to go to run state"); - continue; - } - - DNPRINTF(10, "%s: IOC now at RUNSTATE\n", DEVNAME(mpt)); - - /* - * Give it reply buffers - * - * Do *not* exceed global credits. - */ - for (val = 0, pptr = mpt->reply_phys; - (pptr + MPT_REPLY_SIZE) < (mpt->reply_phys + PAGE_SIZE); - pptr += MPT_REPLY_SIZE) { - mpt_free_reply(mpt, pptr); - if (++val == mpt->mpt_global_credits - 1) - break; - } - - /* XXX MU correct place the call to fw_upload? */ - if (mpt->upload_fw) { - DNPRINTF(10, "%s: firmware upload required\n", - DEVNAME(mpt)); - - if (mpt_do_upload(mpt)) - /* XXX MP should we panic? */ - mpt_prt(mpt, "firmware upload failure"); - } - else - DNPRINTF(10, "%sfirmware upload not required\n", - DEVNAME(mpt)); - - /* - * Enable asynchronous event reporting - */ - mpt_send_event_request(mpt, 1); - - - /* - * Read set up initial configuration information - * (SPI only for now) - */ - - if (mpt->is_fc == 0) { - if (mpt_read_config_info_spi(mpt)) - return (EIO); - - if (mpt_set_initial_config_spi(mpt)) - return (EIO); - } - - /* - * Read IO Unit pages - */ - if (mpt_read_config_info_iou(mpt)) { - mpt_prt(mpt, "could not retrieve IO Unit pages"); - return (EIO); - } - - /* - * if the vmware flag is set skip page retrival since it does - * not support all of them. - */ - if (mpt->vmware) - DNPRINTF(10, "%s: running in vmware, skipping page " - "retrieval\n", DEVNAME(mpt)); - else { - /* - * Read manufacturing pages - */ - if (mpt_read_config_info_mfg(mpt)) { - mpt_prt(mpt, "could not retrieve manufacturing" - "pages"); - return (EIO); - } - - /* - * Read IOC pages - */ - if (mpt_read_config_info_ioc(mpt)) { - mpt_prt(mpt, "could not retrieve IOC pages"); - return (EIO); - } - mpt->im_support = mpt->mpt_ioc_page2.CapabilitiesFlags & - (MPI_IOCPAGE2_CAP_FLAGS_IS_SUPPORT | - MPI_IOCPAGE2_CAP_FLAGS_IME_SUPPORT | - MPI_IOCPAGE2_CAP_FLAGS_IM_SUPPORT); - - /* - * Read RAID pages if we have IM/IME/IS volumes - */ - if (mpt->mpt_ioc_page2.NumActiveVolumes) { - if (mpt_read_config_info_raid(mpt)) { - mpt_prt(mpt, "could not retrieve RAID" - "pages"); - return (EIO); - } - } - } - - /* - * Now enable the port - */ - if (mpt_send_port_enable(mpt, 0) != MPT_OK) { - mpt_prt(mpt, "failed to enable port 0"); - continue; - } - - DNPRINTF(10, "%s: enabled port 0\n", DEVNAME(mpt)); - - /* Everything worked */ - break; - } - - if (try >= MPT_MAX_TRIES) { - mpt_prt(mpt, "failed to initialize IOC"); - return (EIO); - } - - DNPRINTF(10, "%s: enabling interrupts\n", DEVNAME(mpt)); - - mpt_enable_ints(mpt); - return (0); -} - -/* - * mpt_do_upload - create and send FWUpload request to MPT adapter port. - * - * Returns 0 for success, error for failure - */ -int -mpt_do_upload(struct mpt_softc *mpt) -{ - u_int8_t request[MPT_RQSL(mpt)]; - FWUploadReply_t reply; - FWUpload_t *prequest; - FWUploadReply_t *preply; - FWUploadTCSGE_t *ptcsge = NULL; - SGE_SIMPLE32 *se; - int maxsgl; - int sgeoffset; - int i, error; - uint32_t flags; - - if (mpt->fw_image_size == 0 || mpt->fw != NULL) { - return 0; - } - - /* compute the maximum number of elements in the SG list */ - maxsgl = (MPT_RQSL(mpt) - sizeof(MSG_FW_UPLOAD) + - sizeof(SGE_MPI_UNION) - sizeof(FWUploadTCSGE_t)) - / sizeof(SGE_SIMPLE32); - - error = mpt_alloc_fw_mem(mpt, maxsgl); - if (error) { - mpt_prt(mpt,"mpt_alloc_fw_mem error: %d", error); - return error; - } - - if (mpt->fw_dmap->dm_nsegs > maxsgl) { - mpt_prt(mpt,"nsegs > maxsgl"); - return 1; /* XXX */ - } - - prequest = (FWUpload_t *)&request; - preply = (FWUploadReply_t *)&reply; - - memset(prequest, 0, MPT_RQSL(mpt)); - memset(preply, 0, sizeof(reply)); - - prequest->ImageType = MPI_FW_UPLOAD_ITYPE_FW_IOC_MEM; - prequest->Function = MPI_FUNCTION_FW_UPLOAD; - prequest->MsgContext = 0; - - ptcsge = (FWUploadTCSGE_t *) &prequest->SGL; - ptcsge->Reserved = 0; - ptcsge->ContextSize = 0; - ptcsge->DetailsLength = 12; - ptcsge->Flags = MPI_SGE_FLAGS_TRANSACTION_ELEMENT; - ptcsge->Reserved1 = 0; - ptcsge->ImageOffset = 0; - ptcsge->ImageSize = mpt->fw_image_size; /* XXX MU check endianess */ - - sgeoffset = sizeof(FWUpload_t) - sizeof(SGE_MPI_UNION) + - sizeof(FWUploadTCSGE_t); - - se = (SGE_SIMPLE32 *) &request[sgeoffset]; - - flags = MPI_SGE_FLAGS_SIMPLE_ELEMENT; - - DNPRINTF(20, "%s: assembling SG list (%d entries)\n", - DEVNAME(mpt), mpt->fw_dmap->dm_nsegs); - - for (i = 0; i < mpt->fw_dmap->dm_nsegs; i++, se++) { - if (i == mpt->fw_dmap->dm_nsegs - 1) { - /* XXX MU okay? */ - flags |= MPI_SGE_FLAGS_LAST_ELEMENT | - MPI_SGE_FLAGS_END_OF_BUFFER | - MPI_SGE_FLAGS_END_OF_LIST; - } - - se->Address = mpt->fw_dmap->dm_segs[i].ds_addr; - MPI_pSGE_SET_LENGTH(se, mpt->fw_dmap->dm_segs[i].ds_len); - MPI_pSGE_SET_FLAGS(se, flags); - sgeoffset += sizeof(*se); - } - - DNPRINTF(10, "%s: sending FW Upload request to IOC (size: %d, " - "img size: %d)\n", DEVNAME(mpt), sgeoffset, mpt->fw_image_size); - - if ((error = mpt_send_handshake_cmd(mpt, sgeoffset, prequest)) != 0) { - return(error); - } - - error = mpt_recv_handshake_reply(mpt, sizeof(reply), &reply); - - if (error == 0) { - /* - * Handshake transfer was complete and successfull. - * Check the Reply Frame - */ - int status, transfer_sz; - - status = preply->IOCStatus; - DNPRINTF(20, "%s: fw_upload reply status %d\n", - DEVNAME(mpt), status); - - if (status == MPI_IOCSTATUS_SUCCESS) { - transfer_sz = preply->ActualImageSize; - if (transfer_sz != mpt->fw_image_size) - error = EFAULT; - } - else - error = EFAULT; - } - - if (error == 0) { - mpt->upload_fw = 0; - } - else { - mpt_prt(mpt, "freeing image memory"); - mpt_free_fw_mem(mpt); - mpt->fw = NULL; - } - - return error; -} - -/* - * mpt_downloadboot - DownloadBoot code - * Returns 0 for success, <0 for failure - */ -int -mpt_downloadboot(struct mpt_softc *mpt) -{ - MpiFwHeader_t *fwhdr = NULL; - MpiExtImageHeader_t *exthdr = NULL; - int fw_size; - u_int32_t diag0; -#ifdef MPT_DEBUG - u_int32_t diag1; -#endif - int count = 0; - u_int32_t *ptr = NULL; - u_int32_t nextimg; - u_int32_t load_addr; - u_int32_t diagrw_data; - -#ifdef MPT_DEBUG - diag0 = mpt_read(mpt, MPT_OFFSET_DIAGNOSTIC); - if (mpt->mpt2) - diag1 = mpt_read(mpt->mpt2, MPT_OFFSET_DIAGNOSTIC); - mpt_prt(mpt, "diag0=%08x, diag1=%08x", diag0, diag1); -#endif - mpt_prt(mpt, "fw size 0x%x, ioc FW ptr %p", mpt->fw_image_size, - mpt->fw); - if (mpt->mpt2) - mpt_prt(mpt->mpt2, "ioc FW ptr %p", mpt->mpt2->fw); - - fw_size = mpt->fw_image_size; - - if (fw_size == 0) - return -1; - - mpt_prt(mpt, "FW Image @ %p", mpt->fw); - - if (!mpt->fw) - return -2; - - /* - * Write magic sequence to WriteSequence register - * until enter diagnostic mode - */ - diag0 = mpt_read(mpt, MPT_OFFSET_DIAGNOSTIC); - while ((diag0 & MPI_DIAG_DRWE) == 0) { - mpt_write(mpt, MPT_OFFSET_SEQUENCE, 0xFF); - mpt_write(mpt, MPT_OFFSET_SEQUENCE, MPT_DIAG_SEQUENCE_1); - mpt_write(mpt, MPT_OFFSET_SEQUENCE, MPT_DIAG_SEQUENCE_2); - mpt_write(mpt, MPT_OFFSET_SEQUENCE, MPT_DIAG_SEQUENCE_3); - mpt_write(mpt, MPT_OFFSET_SEQUENCE, MPT_DIAG_SEQUENCE_4); - mpt_write(mpt, MPT_OFFSET_SEQUENCE, MPT_DIAG_SEQUENCE_5); - - /* wait 100msec */ - DELAY(100); - - count++; - if (count > 20) { - mpt_prt(mpt, "enable diagnostic mode FAILED! (%02xh)", - diag0); - return -EFAULT; - } - - diag0 = mpt_read(mpt, MPT_OFFSET_DIAGNOSTIC); -#ifdef MPT_DEBUG - if (mpt->mpt2) - diag1 = mpt_read(mpt->mpt2, MPT_OFFSET_DIAGNOSTIC); - mpt_prt(mpt, "diag0=%08x, diag1=%08x", diag0, diag1); -#endif - mpt_prt(mpt, "wrote magic DiagWriteEn sequence (%x)", diag0); - } - - /* Set the DiagRwEn and Disable ARM bits */ - diag0 |= (MPI_DIAG_RW_ENABLE | MPI_DIAG_DISABLE_ARM); - mpt_write(mpt, MPT_OFFSET_DIAGNOSTIC, diag0); - -#ifdef MPT_DEBUG - if (mpt->mpt2) - diag1 = mpt_read(mpt->mpt2, MPT_OFFSET_DIAGNOSTIC); - mpt_prt(mpt, "diag0=%08x, diag1=%08x", diag0, diag1); -#endif - - fwhdr = (MpiFwHeader_t *) mpt->fw; - ptr = (u_int32_t *) fwhdr; - count = (fwhdr->ImageSize + 3)/4; - nextimg = fwhdr->NextImageHeaderOffset; - - /* - * write the LoadStartAddress to the DiagRw Address Register - * XXX linux is using programmed IO for the RWADDR and RWDATA - */ - mpt_write(mpt, MPT_OFFSET_RWADDR, fwhdr->LoadStartAddress); - - mpt_prt(mpt, "LoadStart addr written 0x%x", fwhdr->LoadStartAddress); - mpt_prt(mpt, "writing file image: 0x%x u32's @ %p", count, ptr); - - while (count--) { - mpt_write(mpt, MPT_OFFSET_RWDATA, *ptr); - ptr++; - } - - while (nextimg) { - ptr = (u_int32_t *) (mpt->fw + nextimg); - exthdr = (MpiExtImageHeader_t *) ptr; - count = (exthdr->ImageSize +3)/4; - nextimg = exthdr->NextImageHeaderOffset; - load_addr = exthdr->LoadStartAddress; - - mpt_prt(mpt, "write ext image: 0x%x u32's @ %p", count, ptr); - - mpt_write(mpt, MPT_OFFSET_RWADDR, load_addr); - - while (count--) { - mpt_write(mpt, MPT_OFFSET_RWDATA, *ptr); - ptr++; - } - } - - /* write the IopResetVectorRegAddr */ - mpt_prt(mpt, "write IopResetVector addr!"); - mpt_write(mpt, MPT_OFFSET_RWADDR, fwhdr->IopResetRegAddr); - - /* write the IopResetVectorValue */ - mpt_prt(mpt, "write IopResetVector value!"); - mpt_write(mpt, MPT_OFFSET_RWDATA, fwhdr->IopResetVectorValue); - - /* - * clear the internal flash bad bit - autoincrementing register, - * so must do two writes. - */ - mpt_write(mpt, MPT_OFFSET_RWADDR, 0x3F000000); - diagrw_data = mpt_read(mpt, MPT_OFFSET_RWDATA); - diagrw_data |= 0x4000000; - mpt_write(mpt, MPT_OFFSET_RWADDR, 0x3F000000); - mpt_write(mpt, MPT_OFFSET_RWDATA, diagrw_data); - - /* clear the RW enable and DISARM bits */ - diag0 = mpt_read(mpt, MPT_OFFSET_DIAGNOSTIC); - diag0 &= ~(MPI_DIAG_DISABLE_ARM | MPI_DIAG_RW_ENABLE | - MPI_DIAG_FLASH_BAD_SIG); - mpt_write(mpt, MPT_OFFSET_DIAGNOSTIC, diag0); - - /* write 0xFF to reset the sequencer */ - mpt_write(mpt, MPT_OFFSET_SEQUENCE, 0xFF); - - return 0; -} diff --git a/sys/dev/ic/mpt.h b/sys/dev/ic/mpt.h deleted file mode 100644 index 24c1141e375..00000000000 --- a/sys/dev/ic/mpt.h +++ /dev/null @@ -1,217 +0,0 @@ -/* $OpenBSD: mpt.h,v 1.8 2006/02/04 19:05:00 marco Exp $ */ -/* $NetBSD: mpt.h,v 1.2 2003/07/08 10:06:31 itojun Exp $ */ - -/* - * Copyright (c) 2000, 2001 by Greg Ansley - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * 1. Redistributions of source code must retain the above copyright - * notice immediately at the beginning of the file, without modification, - * this list of conditions, and the following disclaimer. - * 2. The name of the author may not be used to endorse or promote products - * derived from this software without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND - * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE - * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE FOR - * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS - * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) - * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT - * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY - * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF - * SUCH DAMAGE. - */ -/* - * Additional Copyright (c) 2002 by Matthew Jacob under same license. - */ - -/* - * mpt.h: - * - * Generic definitions for LSI Fusion adapters. - * - * Adapted from the FreeBSD "mpt" driver by Jason R. Thorpe for - * Wasabi Systems, Inc. - */ - -#ifndef _DEV_IC_MPT_H_ -#define _DEV_IC_MPT_H_ - -#define DEVNAME(s) ((s)->mpt_dev.dv_xname) - -/* #define MPT_DEBUG */ -#ifdef MPT_DEBUG -extern int mpt_debug; -#define DPRINTF(x...) do { if (mpt_debug) printf(x); } while(0) -#define DNPRINTF(n,x...) do { if (mpt_debug > (n)) printf(x); } while(0) -#else -#define DPRINTF(x...) do { } while (0) -#define DNPRINTF(n,x...) do { } while (0) -#endif - -#include <dev/ic/mpt_openbsd.h> - -#define MPT_OK (0) -#define MPT_FAIL (0x10000) - -/* Register Offset to chip registers */ -#define MPT_OFFSET_DOORBELL 0x00 -#define MPT_OFFSET_SEQUENCE 0x04 -#define MPT_OFFSET_DIAGNOSTIC 0x08 -#define MPT_OFFSET_TEST 0x0C -#define MPT_OFFSET_RWDATA 0x10 -#define MPT_OFFSET_RWADDR 0x14 -#define MPT_OFFSET_INTR_STATUS 0x30 -#define MPT_OFFSET_INTR_MASK 0x34 -#define MPT_OFFSET_REQUEST_Q 0x40 -#define MPT_OFFSET_REPLY_Q 0x44 -#define MPT_OFFSET_HOST_INDEX 0x50 -#define MPT_OFFSET_FUBAR 0x90 - -#define MPT_DIAG_SEQUENCE_1 0x04 -#define MPT_DIAG_SEQUENCE_2 0x0b -#define MPT_DIAG_SEQUENCE_3 0x02 -#define MPT_DIAG_SEQUENCE_4 0x07 -#define MPT_DIAG_SEQUENCE_5 0x0d - -/* Bit Maps for DOORBELL register */ -enum DB_STATE_BITS { - MPT_DB_STATE_RESET = 0x00000000, - MPT_DB_STATE_READY = 0x10000000, - MPT_DB_STATE_RUNNING = 0x20000000, - MPT_DB_STATE_FAULT = 0x40000000, - MPT_DB_STATE_MASK = 0xf0000000 -}; - -#define MPT_STATE(v) ((enum DB_STATE_BITS)((v) & MPT_DB_STATE_MASK)) - -#define MPT_DB_LENGTH_SHIFT (16) -#define MPT_DB_DATA_MASK (0xffff) - -#define MPT_DB_DB_USED 0x08000000 -#define MPT_DB_IS_IN_USE(v) (((v) & MPT_DB_DB_USED) != 0) - -/* - * "Whom" initializor values - */ -#define MPT_DB_INIT_NOONE 0x00 -#define MPT_DB_INIT_BIOS 0x01 -#define MPT_DB_INIT_ROMBIOS 0x02 -#define MPT_DB_INIT_PCIPEER 0x03 -#define MPT_DB_INIT_HOST 0x04 -#define MPT_DB_INIT_MANUFACTURE 0x05 - -#define MPT_WHO(v) \ - ((v & MPI_DOORBELL_WHO_INIT_MASK) >> MPI_DOORBELL_WHO_INIT_SHIFT) - -/* Function Maps for DOORBELL register */ -enum DB_FUNCTION_BITS { - MPT_FUNC_IOC_RESET = 0x40000000, - MPT_FUNC_UNIT_RESET = 0x41000000, - MPT_FUNC_HANDSHAKE = 0x42000000, - MPT_FUNC_REPLY_REMOVE = 0x43000000, - MPT_FUNC_MASK = 0xff000000 -}; - -/* Function Maps for INTERRUPT request register */ -enum _MPT_INTR_REQ_BITS { - MPT_INTR_DB_BUSY = 0x80000000, - MPT_INTR_REPLY_READY = 0x00000008, - MPT_INTR_DB_READY = 0x00000001 -}; - -#define MPT_DB_IS_BUSY(v) (((v) & MPT_INTR_DB_BUSY) != 0) -#define MPT_DB_INTR(v) (((v) & MPT_INTR_DB_READY) != 0) -#define MPT_REPLY_INTR(v) (((v) & MPT_INTR_REPLY_READY) != 0) - -/* Function Maps for INTERRUPT make register */ -enum _MPT_INTR_MASK_BITS { - MPT_INTR_REPLY_MASK = 0x00000008, - MPT_INTR_DB_MASK = 0x00000001 -}; - -/* Function Maps for DIAGNOSTIC make register */ -enum _MPT_DIAG_BITS { - MPT_DIAG_ENABLED = 0x00000080, - MPT_DIAG_FLASHBAD = 0x00000040, - MPT_DIAG_RESET_HIST = 0x00000020, - MPT_DIAG_TTLI = 0x00000008, - MPT_DIAG_RESET_IOC = 0x00000004, - MPT_DIAG_ARM_DISABLE = 0x00000002, - MPT_DIAG_DME = 0x00000001 -}; - -/* Magic addresses in diagnostic memory space */ -#define MPT_DIAG_IOP_BASE (0x00000000) -#define MPT_DIAG_IOP_SIZE (0x00002000) -#define MPT_DIAG_GPIO (0x00030010) -#define MPT_DIAG_IOPQ_REG_BASE0 (0x00050004) -#define MPT_DIAG_IOPQ_REG_BASE1 (0x00051004) -#define MPT_DIAG_MEM_CFG_BASE (0x00040000) -#define MPT_DIAG_CTX0_BASE (0x000E0000) -#define MPT_DIAG_CTX0_SIZE (0x00002000) -#define MPT_DIAG_CTX1_BASE (0x001E0000) -#define MPT_DIAG_CTX1_SIZE (0x00002000) -#define MPT_DIAG_FLASH_BASE (0x00800000) -#define MPT_DIAG_RAM_BASE (0x01000000) -#define MPT_DIAG_RAM_SIZE (0x00400000) - -/* GPIO bit assignments */ -#define MPT_DIAG_GPIO_SCL (0x00010000) -#define MPT_DIAG_GPIO_SDA_OUT (0x00008000) -#define MPT_DIAG_GPIO_SDA_IN (0x00004000) - -#define MPT_REPLY_EMPTY (0xffffffff) /* Reply Queue Empty Symbol */ -#define MPT_CONTEXT_REPLY (0x80000000) -#define MPT_CONTEXT_MASK (~0xE0000000) - -#ifdef _KERNEL -int mpt_soft_reset(struct mpt_softc *); -void mpt_hard_reset(struct mpt_softc *); -int mpt_recv_handshake_reply(struct mpt_softc *, size_t, void *); - -void mpt_send_cmd(struct mpt_softc *, struct req_entry *); -void mpt_free_reply(struct mpt_softc *, u_int32_t); -void mpt_enable_ints(struct mpt_softc *); -void mpt_disable_ints(struct mpt_softc *); -u_int32_t mpt_pop_reply_queue(struct mpt_softc *); -int mpt_init(struct mpt_softc *, u_int32_t); -int mpt_reset(struct mpt_softc *); -int mpt_send_handshake_cmd(struct mpt_softc *, size_t, void *); -struct req_entry * mpt_get_request(struct mpt_softc *); -void mpt_free_request(struct mpt_softc *, struct req_entry *); -void mpt_init_request(struct mpt_softc *, struct req_entry *); -int mpt_intr(void *); -void mpt_check_doorbell(struct mpt_softc *); - -int mpt_read_cfg_page(struct mpt_softc *, int, CONFIG_PAGE_HEADER *); -int mpt_write_cfg_page(struct mpt_softc *, int, CONFIG_PAGE_HEADER *); -int mpt_read_cfg_header(struct mpt_softc *, int, int, int, CONFIG_PAGE_HEADER *); - -/* FW Download Boot */ -int mpt_downloadboot(struct mpt_softc *); -int mpt_do_upload(struct mpt_softc *); -int mpt_alloc_fw_mem(struct mpt_softc *, int); -void mpt_free_fw_mem(struct mpt_softc *); - -/* mpt_debug.c functions */ -#ifdef MPT_DEBUG -void mpt_print_config_reply(void *); -void mpt_print_scsi_io_request(MSG_SCSI_IO_REQUEST *); -void mpt_print_config_request(void *); -void mpt_print_request(void *); -void mpt_print_db(u_int32_t); -void mpt_print_reply(void *); -char *mpt_ioc_diag(u_int32_t); -char *mpt_req_state(enum mpt_req_state); -#else -#define mpt_print_db(x) -#endif /* MPT_DEBUG */ - -#endif /* _KERNEL */ - -#endif /* _DEV_IC_MPT_H_ */ diff --git a/sys/dev/ic/mpt_debug.c b/sys/dev/ic/mpt_debug.c deleted file mode 100644 index b446b27138d..00000000000 --- a/sys/dev/ic/mpt_debug.c +++ /dev/null @@ -1,644 +0,0 @@ -/* $OpenBSD: mpt_debug.c,v 1.5 2006/02/04 19:05:00 marco Exp $ */ -/* $NetBSD: mpt_debug.c,v 1.2 2003/07/14 15:47:11 lukem Exp $ */ - -/* - * Copyright (c) 2000, 2001 by Greg Ansley - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * 1. Redistributions of source code must retain the above copyright - * notice immediately at the beginning of the file, without modification, - * this list of conditions, and the following disclaimer. - * 2. The name of the author may not be used to endorse or promote products - * derived from this software without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND - * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE - * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE FOR - * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS - * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) - * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT - * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY - * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF - * SUCH DAMAGE. - */ -/* - * Additional Copyright (c) 2002 by Matthew Jacob under same license. - */ - -/* - * mpt_debug.c: - * - * Debug routines for LSI Fusion adapters. - */ - -#include <sys/cdefs.h> -/* __KERNEL_RCSID(0, "$NetBSD: mpt_debug.c,v 1.2 2003/07/14 15:47:11 lukem Exp $"); */ - -#include <dev/ic/mpt.h> - -#ifdef MPT_DEBUG -char *mpt_ioc_status(int); -char *mpt_ioc_function(int); -char *mpt_ioc_event(int); -char *mpt_scsi_state(int); -char *mpt_scsi_status(int); -char *mpt_who(int); -char *mpt_state(u_int32_t); -void mpt_print_reply_hdr(MSG_DEFAULT_REPLY *); -void mpt_print_init_reply(MSG_IOC_INIT_REPLY *); -void mpt_print_ioc_facts(MSG_IOC_FACTS_REPLY *); -void mpt_print_enable_reply(MSG_PORT_ENABLE_REPLY *); -void mpt_print_scsi_io_reply(MSG_SCSI_IO_REPLY *); -void mpt_print_event_notice(MSG_EVENT_NOTIFY_REPLY *); -void mpt_print_request_hdr(MSG_REQUEST_HEADER *); - -struct Error_Map { - int Error_Code; - char *Error_String; -}; - -static const struct Error_Map IOC_Status[] = { -{ MPI_IOCSTATUS_SUCCESS, "Success" }, -{ MPI_IOCSTATUS_INVALID_FUNCTION, "IOC: Invalid Function" }, -{ MPI_IOCSTATUS_BUSY, "IOC: Busy" }, -{ MPI_IOCSTATUS_INVALID_SGL, "IOC: Invalid SGL" }, -{ MPI_IOCSTATUS_INTERNAL_ERROR, "IOC: Internal Error" }, -{ MPI_IOCSTATUS_RESERVED, "IOC: Reserved" }, -{ MPI_IOCSTATUS_INSUFFICIENT_RESOURCES, "IOC: Insufficient Resources" }, -{ MPI_IOCSTATUS_INVALID_FIELD, "IOC: Invalid Field" }, -{ MPI_IOCSTATUS_INVALID_STATE, "IOC: Invalid State" }, -{ MPI_IOCSTATUS_CONFIG_INVALID_ACTION, "Invalid Action" }, -{ MPI_IOCSTATUS_CONFIG_INVALID_TYPE, "Invalid Type" }, -{ MPI_IOCSTATUS_CONFIG_INVALID_PAGE, "Invalid Page" }, -{ MPI_IOCSTATUS_CONFIG_INVALID_DATA, "Invalid Data" }, -{ MPI_IOCSTATUS_CONFIG_NO_DEFAULTS, "No Defaults" }, -{ MPI_IOCSTATUS_CONFIG_CANT_COMMIT, "Can't Commit" }, -{ MPI_IOCSTATUS_SCSI_RECOVERED_ERROR, "SCSI: Recoverd Error" }, -{ MPI_IOCSTATUS_SCSI_INVALID_BUS, "SCSI: Invalid Bus" }, -{ MPI_IOCSTATUS_SCSI_INVALID_TARGETID, "SCSI: Invalid Target ID" }, -{ MPI_IOCSTATUS_SCSI_DEVICE_NOT_THERE, "SCSI: Device Not There" }, -{ MPI_IOCSTATUS_SCSI_DATA_OVERRUN, "SCSI: Data Overrun" }, -{ MPI_IOCSTATUS_SCSI_DATA_UNDERRUN, "SCSI: Data Underrun" }, -{ MPI_IOCSTATUS_SCSI_IO_DATA_ERROR, "SCSI: Data Error" }, -{ MPI_IOCSTATUS_SCSI_PROTOCOL_ERROR, "SCSI: Protocol Error" }, -{ MPI_IOCSTATUS_SCSI_TASK_TERMINATED, "SCSI: Task Terminated" }, -{ MPI_IOCSTATUS_SCSI_RESIDUAL_MISMATCH, "SCSI: Residual Mismatch" }, -{ MPI_IOCSTATUS_SCSI_TASK_MGMT_FAILED, "SCSI: Task Management Failed" }, -{ MPI_IOCSTATUS_SCSI_IOC_TERMINATED, "SCSI: IOC Bus Reset" }, -{ MPI_IOCSTATUS_SCSI_EXT_TERMINATED, "SCSI: External Bus Reset" }, -{ MPI_IOCSTATUS_TARGET_PRIORITY_IO, "SCSI Target: Priority I/O" }, -{ MPI_IOCSTATUS_TARGET_INVALID_PORT, "SCSI Target: Invalid Port" }, -{ MPI_IOCSTATUS_TARGET_INVALID_IOCINDEX, "SCSI Target: Invalid IOC Index" }, -{ MPI_IOCSTATUS_TARGET_ABORTED, "SCSI Target: Aborted" }, -{ MPI_IOCSTATUS_TARGET_NO_CONN_RETRYABLE, "SCSI Target: No Connection (Retryable)" }, -{ MPI_IOCSTATUS_TARGET_NO_CONNECTION, "SCSI Target: No Connection" }, -{ MPI_IOCSTATUS_TARGET_XFER_COUNT_MISMATCH,"SCSI Target: Transfer Count Mismatch" }, -{ MPI_IOCSTATUS_TARGET_FC_ABORTED, "FC: Aborted" }, -{ MPI_IOCSTATUS_TARGET_FC_RX_ID_INVALID, "FC: Recieve ID Invalid" }, -{ MPI_IOCSTATUS_TARGET_FC_DID_INVALID, "FC: Recieve DID Invalid" }, -{ MPI_IOCSTATUS_TARGET_FC_NODE_LOGGED_OUT,"FC: Node Logged Out" }, -{ MPI_IOCSTATUS_LAN_DEVICE_NOT_FOUND, "LAN: Device Not Found" }, -{ MPI_IOCSTATUS_LAN_DEVICE_FAILURE, "LAN: Device Not Failure" }, -{ MPI_IOCSTATUS_LAN_TRANSMIT_ERROR, "LAN: Transmit Error" }, -{ MPI_IOCSTATUS_LAN_TRANSMIT_ABORTED, "LAN: Transmit Aborted" }, -{ MPI_IOCSTATUS_LAN_RECEIVE_ERROR, "LAN: Recieve Error" }, -{ MPI_IOCSTATUS_LAN_RECEIVE_ABORTED, "LAN: Recieve Aborted" }, -{ MPI_IOCSTATUS_LAN_PARTIAL_PACKET, "LAN: Partial Packet" }, -{ MPI_IOCSTATUS_LAN_CANCELED, "LAN: Canceled" }, -{ -1, 0}, -}; - -static const struct Error_Map IOC_Func[] = { -{ MPI_FUNCTION_SCSI_IO_REQUEST, "SCSI IO Request" }, -{ MPI_FUNCTION_SCSI_TASK_MGMT, "SCSI Task Management" }, -{ MPI_FUNCTION_IOC_INIT, "IOC Init" }, -{ MPI_FUNCTION_IOC_FACTS, "IOC Facts" }, -{ MPI_FUNCTION_CONFIG, "Config" }, -{ MPI_FUNCTION_PORT_FACTS, "Port Facts" }, -{ MPI_FUNCTION_PORT_ENABLE, "Port Enable" }, -{ MPI_FUNCTION_EVENT_NOTIFICATION, "Event Notification" }, -{ MPI_FUNCTION_FW_DOWNLOAD, "FW Download" }, -{ MPI_FUNCTION_TARGET_CMD_BUFFER_POST, "SCSI Target Command Buffer" }, -{ MPI_FUNCTION_TARGET_ASSIST, "Target Assist" }, -{ MPI_FUNCTION_TARGET_STATUS_SEND, "Target Status Send" }, -{ MPI_FUNCTION_TARGET_MODE_ABORT, "Target Mode Abort" }, -{ MPI_FUNCTION_TARGET_FC_BUF_POST_LINK_SRVC, "FC: Link Service Buffers" }, -{ MPI_FUNCTION_TARGET_FC_RSP_LINK_SRVC, "FC: Link Service Response" }, -{ MPI_FUNCTION_TARGET_FC_EX_SEND_LINK_SRVC, "FC: Send Extended Link Service" }, -{ MPI_FUNCTION_TARGET_FC_ABORT, "FC: Abort" }, -{ MPI_FUNCTION_LAN_SEND, "LAN Send" }, -{ MPI_FUNCTION_LAN_RECEIVE, "LAN Recieve" }, -{ MPI_FUNCTION_LAN_RESET, "LAN Reset" }, -{ -1, 0}, -}; - -static const struct Error_Map IOC_Event[] = { -{ MPI_EVENT_NONE, "None" }, -{ MPI_EVENT_LOG_DATA, "LogData" }, -{ MPI_EVENT_STATE_CHANGE, "State Change" }, -{ MPI_EVENT_UNIT_ATTENTION, "Unit Attention" }, -{ MPI_EVENT_IOC_BUS_RESET, "IOC Bus Reset" }, -{ MPI_EVENT_EXT_BUS_RESET, "External Bus Reset" }, -{ MPI_EVENT_RESCAN, "Rescan" }, -{ MPI_EVENT_LINK_STATUS_CHANGE, "Link Status Change" }, -{ MPI_EVENT_LOOP_STATE_CHANGE, "Loop State Change" }, -{ MPI_EVENT_LOGOUT, "Logout" }, -{ MPI_EVENT_EVENT_CHANGE, "EventChange" }, -{ -1, 0}, -}; - -static const struct Error_Map IOC_SCSIState[] = { -{ MPI_SCSI_STATE_AUTOSENSE_VALID, "AutoSense_Valid" }, -{ MPI_SCSI_STATE_AUTOSENSE_FAILED, "AutoSense_Failed" }, -{ MPI_SCSI_STATE_NO_SCSI_STATUS, "No_SCSI_Status" }, -{ MPI_SCSI_STATE_TERMINATED, "State_Terminated" }, -{ MPI_SCSI_STATE_RESPONSE_INFO_VALID, "Repsonse_Info_Valid" }, -{ MPI_SCSI_STATE_QUEUE_TAG_REJECTED, "Queue Tag Rejected" }, -{ -1, 0}, -}; - -static const struct Error_Map IOC_SCSIStatus[] = { -{ SCSI_OK, "OK" }, -{ SCSI_CHECK, "Check Condition" }, -#if 0 -{ SCSI_STATUS_COND_MET, "Check Condition Met" }, -#endif -{ SCSI_BUSY, "Busy" }, -{ SCSI_INTERM, "Intermediate Condition" }, -#if 0 -{ SCSI_STATUS_INTERMED_COND_MET, "Intermediate Condition Met" }, -#endif -{ SCSI_RESV_CONFLICT, "Reservation Conflict" }, -#if 0 -{ SCSI_STATUS_CMD_TERMINATED, "Command Terminated" }, -#endif -{ SCSI_QUEUE_FULL, "Queue Full" }, -{ -1, 0}, -}; - -static const struct Error_Map IOC_Diag[] = { -{ MPT_DIAG_ENABLED, "DWE" }, -{ MPT_DIAG_FLASHBAD, "FLASH_Bad" }, -{ MPT_DIAG_TTLI, "TTLI" }, -{ MPT_DIAG_RESET_IOC, "Reset" }, -{ MPT_DIAG_ARM_DISABLE, "DisARM" }, -{ MPT_DIAG_DME, "DME" }, -{ -1, 0 }, -}; - - -void mpt_dump_sgl(SGE_IO_UNION *sgl); - -char * -mpt_ioc_status(int code) -{ - const struct Error_Map *status = IOC_Status; - static char buf[64]; - while (status->Error_Code >= 0) { - if (status->Error_Code == (code & MPI_IOCSTATUS_MASK)) - return status->Error_String; - status++; - } - snprintf(buf, sizeof buf, "Unknown (0x%08x)", code); - return buf; -} - -char * -mpt_ioc_diag(u_int32_t code) -{ - const struct Error_Map *status = IOC_Diag; - static char buf[128]; - char *ptr = buf; - char *end = &buf[128]; - int len; - - buf[0] = '\0'; - len = snprintf(buf, sizeof buf, "(0x%08x)", code); - if (len == -1 || len > sizeof buf) - return buf; - ptr += len; - while (status->Error_Code >= 0) { - if ((status->Error_Code & code) != 0) { - len = snprintf(ptr, (size_t)(end-ptr), "%s ", - status->Error_String); - if (len == -1 || len > end - ptr) - return buf; - ptr += len; - } - status++; - } - return buf; -} - -char * -mpt_ioc_function(int code) -{ - const struct Error_Map *status = IOC_Func; - static char buf[64]; - while (status->Error_Code >= 0) { - if (status->Error_Code == code) - return status->Error_String; - status++; - } - snprintf(buf, sizeof buf, "Unknown (0x%08x)", code); - return buf; -} -char * -mpt_ioc_event(int code) -{ - const struct Error_Map *status = IOC_Event; - static char buf[64]; - while (status->Error_Code >= 0) { - if (status->Error_Code == code) - return status->Error_String; - status++; - } - snprintf(buf, sizeof buf, "Unknown (0x%08x)", code); - return buf; -} -char * -mpt_scsi_state(int code) -{ - const struct Error_Map *status = IOC_SCSIState; - static char buf[128]; - char *ptr = buf; - char *end = &buf[128]; - int len; - - buf[0] = '\0'; - len = snprintf(buf, sizeof buf, "(0x%08x)", code); - if (len == -1 || len > sizeof buf) - return buf; - ptr += len; - while (status->Error_Code >= 0) { - if ((status->Error_Code & code) != 0) { - len = snprintf(ptr, (size_t)(end-ptr), "%s ", - status->Error_String); - if (len == -1 || len > end - ptr) - return buf; - ptr += len; - } - status++; - } - return buf; -} -char * -mpt_scsi_status(int code) -{ - const struct Error_Map *status = IOC_SCSIStatus; - static char buf[64]; - while (status->Error_Code >= 0) { - if (status->Error_Code == code) - return status->Error_String; - status++; - } - snprintf(buf, sizeof buf, "Unknown (0x%08x)", code); - return buf; -} - -char * -mpt_who(int who_init) -{ - char *who; - - switch (who_init) { - case MPT_DB_INIT_NOONE: who = "No One"; break; - case MPT_DB_INIT_BIOS: who = "BIOS"; break; - case MPT_DB_INIT_ROMBIOS: who = "ROM BIOS"; break; - case MPT_DB_INIT_PCIPEER: who = "PCI Peer"; break; - case MPT_DB_INIT_HOST: who = "Host Driver"; break; - case MPT_DB_INIT_MANUFACTURE: who = "Manufacturing"; break; - default: who = "Unknown"; break; - } - return who; -} - -char * -mpt_state(u_int32_t mb) -{ - char *text; - - switch (MPT_STATE(mb)) { - case MPT_DB_STATE_RESET: text = "Reset"; break; - case MPT_DB_STATE_READY: text = "Ready"; break; - case MPT_DB_STATE_RUNNING:text = "Running"; break; - case MPT_DB_STATE_FAULT: text = "Fault"; break; - default: text = "Unknown"; break; - } - return text; -}; - -void -mpt_print_db(u_int32_t mb) -{ - printf("mpt mailbox: (0x%x) State %s WhoInit %s\n", - mb, mpt_state(mb), mpt_who(MPT_WHO(mb))); -} - -/*****************************************************************************/ -/* Reply functions */ -/*****************************************************************************/ -void -mpt_print_reply_hdr(MSG_DEFAULT_REPLY *msg) -{ - printf("%s Reply @ %p\n", mpt_ioc_function(msg->Function), msg); - printf("\tIOC Status %s\n", mpt_ioc_status(msg->IOCStatus)); - printf("\tIOCLogInfo 0x%08x\n", msg->IOCLogInfo); - printf("\tMsgLength 0x%02x\n", msg->MsgLength); - printf("\tMsgFlags 0x%02x\n", msg->MsgFlags); - printf("\tMsgContext 0x%08x\n", msg->MsgContext); -} - -void -mpt_print_init_reply(MSG_IOC_INIT_REPLY *msg) -{ - mpt_print_reply_hdr((MSG_DEFAULT_REPLY *)msg); - printf("\tWhoInit %s\n", mpt_who(msg->WhoInit)); - printf("\tMaxDevices 0x%02x\n", msg->MaxDevices); - printf("\tMaxBuses 0x%02x\n", msg->MaxBuses); -} - -void -mpt_print_ioc_facts(MSG_IOC_FACTS_REPLY *msg) -{ - mpt_print_reply_hdr((MSG_DEFAULT_REPLY *)msg); - printf("\tIOCNumber %d\n", msg->IOCNumber); - printf("\tMaxChainDepth %d\n", msg->MaxChainDepth); - printf("\tWhoInit %s\n", mpt_who(msg->WhoInit)); - printf("\tBlockSize %d\n", msg->BlockSize); - printf("\tFlags %d\n", msg->Flags); - printf("\tReplyQueueDepth %d\n", msg->ReplyQueueDepth); - printf("\tReqFrameSize 0x%04x\n", msg->RequestFrameSize); - printf("\tFW Version 0x%08x\n", msg->FWVersion.Word); - printf("\tProduct ID 0x%04x\n", msg->ProductID); - printf("\tCredits 0x%04x\n", msg->GlobalCredits); - printf("\tPorts %d\n", msg->NumberOfPorts); - printf("\tEventState 0x%02x\n", msg->EventState); - printf("\tHostMFA_HA 0x%08x\n", msg->CurrentHostMfaHighAddr); - printf("\tSenseBuf_HA 0x%08x\n", - msg->CurrentSenseBufferHighAddr); - printf("\tRepFrameSize 0x%04x\n", msg->CurReplyFrameSize); - printf("\tMaxDevices 0x%02x\n", msg->MaxDevices); - printf("\tMaxBuses 0x%02x\n", msg->MaxBuses); - printf("\tFWImageSize 0x%04x\n", msg->FWImageSize); -} - -void -mpt_print_enable_reply(MSG_PORT_ENABLE_REPLY *msg) -{ - mpt_print_reply_hdr((MSG_DEFAULT_REPLY *)msg); - printf("\tPort: %d\n", msg->PortNumber); -} - -void -mpt_print_scsi_io_reply(MSG_SCSI_IO_REPLY *msg) -{ - mpt_print_reply_hdr((MSG_DEFAULT_REPLY *)msg); - printf("\tBus: %d\n", msg->Bus); - printf("\tTargetID %d\n", msg->TargetID); - printf("\tCDBLength %d\n", msg->CDBLength); - printf("\tSCSI Status: %s\n", mpt_scsi_status(msg->SCSIStatus)); - printf("\tSCSI State: %s\n", mpt_scsi_state(msg->SCSIState)); - printf("\tTransferCnt 0x%04x\n", msg->TransferCount); - printf("\tSenseCnt 0x%04x\n", msg->SenseCount); - printf("\tResponseInfo 0x%08x\n", msg->ResponseInfo); -} - - - -void -mpt_print_event_notice(MSG_EVENT_NOTIFY_REPLY *msg) -{ - mpt_print_reply_hdr((MSG_DEFAULT_REPLY *)msg); - printf("\tEvent: %s\n", mpt_ioc_event(msg->Event)); - printf("\tEventContext 0x%04x\n", msg->EventContext); - printf("\tAckRequired %d\n", msg->AckRequired); - printf("\tEventDataLength %d\n", msg->EventDataLength); - printf("\tContinuation %d\n", msg->MsgFlags & 0x80); - switch(msg->Event) { - case MPI_EVENT_LOG_DATA: - printf("\tEvtLogData: 0x%04x\n", msg->Data[0]); - break; - - case MPI_EVENT_UNIT_ATTENTION: - printf("\tTargetID: 0x%04x\n", - msg->Data[0] & 0xff); - printf("\tBus: 0x%04x\n", - (msg->Data[0] >> 8) & 0xff); - break; - - case MPI_EVENT_IOC_BUS_RESET: - case MPI_EVENT_EXT_BUS_RESET: - case MPI_EVENT_RESCAN: - printf("\tPort: %d\n", - (msg->Data[0] >> 8) & 0xff); - break; - - case MPI_EVENT_LINK_STATUS_CHANGE: - printf("\tLinkState: %d\n", - msg->Data[0] & 0xff); - printf("\tPort: %d\n", - (msg->Data[1] >> 8) & 0xff); - break; - - case MPI_EVENT_LOOP_STATE_CHANGE: - printf("\tType: %d\n", - (msg->Data[0] >> 16) & 0xff); - printf("\tChar3: 0x%02x\n", - (msg->Data[0] >> 8) & 0xff); - printf("\tChar4: 0x%02x\n", - (msg->Data[0] ) & 0xff); - printf("\tPort: %d\n", - (msg->Data[1] >> 8) & 0xff); - break; - - case MPI_EVENT_LOGOUT: - printf("\tN_PortId: 0x%04x\n", msg->Data[0]); - printf("\tPort: %d\n", - (msg->Data[1] >> 8) & 0xff); - break; - } - -} - -void -mpt_print_reply(void *vmsg) -{ - MSG_DEFAULT_REPLY *msg = vmsg; - - switch (msg->Function) { - case MPI_FUNCTION_EVENT_NOTIFICATION: - mpt_print_event_notice((MSG_EVENT_NOTIFY_REPLY *)msg); - break; - case MPI_FUNCTION_PORT_ENABLE: - mpt_print_enable_reply((MSG_PORT_ENABLE_REPLY *)msg); - break; - case MPI_FUNCTION_IOC_FACTS: - mpt_print_ioc_facts((MSG_IOC_FACTS_REPLY *)msg); - break; - case MPI_FUNCTION_IOC_INIT: - mpt_print_init_reply((MSG_IOC_INIT_REPLY *)msg); - break; - case MPI_FUNCTION_SCSI_IO_REQUEST: - mpt_print_scsi_io_reply((MSG_SCSI_IO_REPLY *)msg); - break; - default: - mpt_print_reply_hdr((MSG_DEFAULT_REPLY *)msg); - break; - } -} - -/*****************************************************************************/ -/* Request functions */ -/*****************************************************************************/ -void -mpt_print_request_hdr(MSG_REQUEST_HEADER *req) -{ - printf("%s @ %p\n", mpt_ioc_function(req->Function), req); - printf("\tChain Offset 0x%02x\n", req->ChainOffset); - printf("\tMsgFlags 0x%02x\n", req->MsgFlags); - printf("\tMsgContext 0x%08x\n", req->MsgContext); -} - -void -mpt_print_scsi_io_request(MSG_SCSI_IO_REQUEST *orig_msg) -{ - MSG_SCSI_IO_REQUEST local, *msg = &local; - int i; - - bcopy(orig_msg, msg, sizeof (MSG_SCSI_IO_REQUEST)); - mpt_print_request_hdr((MSG_REQUEST_HEADER *)msg); - printf("\tBus: %d\n", msg->Bus); - printf("\tTargetID %d\n", msg->TargetID); - printf("\tSenseBufferLength %d\n", msg->SenseBufferLength); - printf("\tLUN: 0x%0x\n", msg->LUN[1]); - printf("\tControl 0x%08x ", msg->Control); -#define MPI_PRINT_FIELD(x) \ - case MPI_SCSIIO_CONTROL_ ## x : \ - printf(" " #x " "); \ - break - - switch (msg->Control & MPI_SCSIIO_CONTROL_DATADIRECTION_MASK) { - MPI_PRINT_FIELD(NODATATRANSFER); - MPI_PRINT_FIELD(WRITE); - MPI_PRINT_FIELD(READ); - default: - printf(" Invalid DIR! "); - break; - } - switch (msg->Control & MPI_SCSIIO_CONTROL_TASKATTRIBUTE_MASK) { - MPI_PRINT_FIELD(SIMPLEQ); - MPI_PRINT_FIELD(HEADOFQ); - MPI_PRINT_FIELD(ORDEREDQ); - MPI_PRINT_FIELD(ACAQ); - MPI_PRINT_FIELD(UNTAGGED); - MPI_PRINT_FIELD(NO_DISCONNECT); - default: - printf(" Unknown attribute! "); - break; - } - - printf("\n"); -#undef MPI_PRINT_FIELD - - printf("\tDataLength\t0x%08x\n", msg->DataLength); - printf("\tSenseBufAddr\t0x%08x\n", msg->SenseBufferLowAddr); - printf("\tCDB[0:%d]\t", msg->CDBLength); - for (i = 0; i < msg->CDBLength; i++) - printf("%02x ", msg->CDB[i]); - printf("\n"); - mpt_dump_sgl(&orig_msg->SGL); -} - -void -mpt_print_request(void *vreq) -{ - MSG_REQUEST_HEADER *req = vreq; - - switch (req->Function) { - case MPI_FUNCTION_SCSI_IO_REQUEST: - mpt_print_scsi_io_request((MSG_SCSI_IO_REQUEST *)req); - break; - default: - mpt_print_request_hdr(req); - break; - } -} - -char * -mpt_req_state(enum mpt_req_state state) -{ - char *text; - - switch (state) { - case REQ_FREE: text = "Free"; break; - case REQ_IN_PROGRESS: text = "In Progress"; break; - case REQ_ON_CHIP: text = "On Chip"; break; - case REQ_TIMEOUT: text = "Timeout"; break; - default: text = "Unknown"; break; - } - return text; -}; - -void -mpt_dump_sgl(SGE_IO_UNION *su) -{ - SGE_SIMPLE32 *se = (SGE_SIMPLE32 *) su; - int iCount, flags; - - iCount = MPT_SGL_MAX; - do { - int iprt; - - printf("\t"); - flags = MPI_SGE_GET_FLAGS(se->FlagsLength); - switch (flags & MPI_SGE_FLAGS_ELEMENT_MASK) { - case MPI_SGE_FLAGS_SIMPLE_ELEMENT: - { - printf("SE32 %p: Addr=0x%0x FlagsLength=0x%0x\n", - se, se->Address, se->FlagsLength); - printf(" "); - break; - } - case MPI_SGE_FLAGS_CHAIN_ELEMENT: - { - SGE_CHAIN32 *ce = (SGE_CHAIN32 *) se; - printf("CE32 %p: Addr=0x%0x NxtChnO=0x%x Flgs=0x%x " - "Len=0x%0x\n", ce, ce->Address, ce->NextChainOffset, - ce->Flags, ce->Length); - flags = 0; - break; - } - case MPI_SGE_FLAGS_TRANSACTION_ELEMENT: - printf("TE32 @ %p\n", se); - flags = 0; - break; - } - iprt = 0; -#define MPT_PRINT_FLAG(x) \ - if (flags & MPI_SGE_FLAGS_ ## x ) { \ - if (iprt == 0) { \ - printf("\t"); \ - } \ - printf(" "); \ - printf( #x ); \ - iprt++; \ - } - MPT_PRINT_FLAG(LOCAL_ADDRESS); - MPT_PRINT_FLAG(HOST_TO_IOC); - MPT_PRINT_FLAG(64_BIT_ADDRESSING); - MPT_PRINT_FLAG(LAST_ELEMENT); - MPT_PRINT_FLAG(END_OF_BUFFER); - MPT_PRINT_FLAG(END_OF_LIST); -#undef MPT_PRINT_FLAG - if (iprt) - printf("\n"); - se++; - iCount -= 1; - } while ((flags & MPI_SGE_FLAGS_END_OF_LIST) == 0 && iCount != 0); -} -#endif /* MPT_DEBUG */ diff --git a/sys/dev/ic/mpt_mpilib.h b/sys/dev/ic/mpt_mpilib.h deleted file mode 100644 index 15980f09fa8..00000000000 --- a/sys/dev/ic/mpt_mpilib.h +++ /dev/null @@ -1,5055 +0,0 @@ -/* $OpenBSD: mpt_mpilib.h,v 1.6 2005/11/16 04:31:32 marco Exp $ */ - -/* $FreeBSD: /repoman/r/ncvs/src/sys/dev/mpt/mpilib/mpi_type.h,v 1.7 2005/07/10 15:05:39 scottl Exp $ */ -/* - * Copyright (c) 2000-2005, LSI Logic Corporation and its contributors. - * All rights reserved. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions are - * met: - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce at minimum a disclaimer - * substantially similar to the "NO WARRANTY" disclaimer below - * ("Disclaimer") and any redistribution must be conditioned upon including - * a substantially similar Disclaimer requirement for further binary - * redistribution. - * 3. Neither the name of the LSI Logic Corporation nor the names of its - * contributors may be used to endorse or promote products derived from - * this software without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" - * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE - * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE - * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR - * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF - * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS - * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN - * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) - * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF THE COPYRIGHT - * OWNER OR CONTRIBUTOR IS ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - * - * Name: MPI_TYPE.H - * Title: MPI Basic type definitions - * Creation Date: June 6, 2000 - * - * MPI Version: 01.02.01 - * - * Version History - * --------------- - * - * Date Version Description - * -------- -------- ------------------------------------------------------ - * 05-08-00 00.10.01 Original release for 0.10 spec dated 4/26/2000. - * 06-06-00 01.00.01 Update version number for 1.0 release. - * 11-02-00 01.01.01 Original release for post 1.0 work - * 02-20-01 01.01.02 Added define and ifdef for MPI_POINTER. - * 08-08-01 01.02.01 Original release for v1.2 work. - * -------------------------------------------------------------------------- - */ - -#ifndef MPI_TYPE_H -#define MPI_TYPE_H - - -/******************************************************************************* - * Define MPI_POINTER if it hasn't already been defined. By default MPI_POINTER - * is defined to be a near pointer. MPI_POINTER can be defined as a far pointer - * by defining MPI_POINTER as "far *" before this header file is included. - */ -#ifndef MPI_POINTER -#define MPI_POINTER * -#endif - - -/***************************************************************************** -* -* B a s i c T y p e s -* -*****************************************************************************/ - -typedef int8_t S8; -typedef uint8_t U8; -typedef int16_t S16; -typedef uint16_t U16; -typedef int32_t S32; -typedef uint32_t U32; - -typedef struct _S64 -{ - U32 Low; - S32 High; -} S64; - -typedef struct _U64 -{ - U32 Low; - U32 High; -} U64; - - -/****************************************************************************/ -/* Pointers */ -/****************************************************************************/ - -typedef S8 *PS8; -typedef U8 *PU8; -typedef S16 *PS16; -typedef U16 *PU16; -typedef S32 *PS32; -typedef U32 *PU32; -typedef S64 *PS64; -typedef U64 *PU64; - - -#endif - -/* $FreeBSD: /repoman/r/ncvs/src/sys/dev/mpt/mpilib/fc_log.h,v 1.5 2005/07/10 15:05:39 scottl Exp $ */ -/*- - * Copyright (c) 2000-2005, LSI Logic Corporation and its contributors. - * All rights reserved. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions are - * met: - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce at minimum a disclaimer - * substantially similar to the "NO WARRANTY" disclaimer below - * ("Disclaimer") and any redistribution must be conditioned upon including - * a substantially similar Disclaimer requirement for further binary - * redistribution. - * 3. Neither the name of the LSI Logic Corporation nor the names of its - * contributors may be used to endorse or promote products derived from - * this software without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" - * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE - * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE - * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR - * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF - * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS - * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN - * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) - * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF THE COPYRIGHT - * OWNER OR CONTRIBUTOR IS ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - * - * NAME: fc_log.h - * SUMMARY: MPI IocLogInfo definitions for the SYMFC9xx chips - * DESCRIPTION: Contains the enumerated list of values that may be returned - * in the IOCLogInfo field of a MPI Default Reply Message. - * - * CREATION DATE: 6/02/2000 - * ID: $Id: mpt_mpilib.h,v 1.6 2005/11/16 04:31:32 marco Exp $ - */ - -/* - * MpiIocLogInfo_t enum - * - * These 32 bit values are used in the IOCLogInfo field of the MPI reply - * messages. - * The value is 0xabcccccc where - * a = The type of log info as per the MPI spec. Since these codes are - * all for Fibre Channel this value will always be 2. - * b = Specifies a subclass of the firmware where - * 0 = FCP Initiator - * 1 = FCP Target - * 2 = LAN - * 3 = MPI Message Layer - * 4 = FC Link - * 5 = Context Manager - * 6 = Invalid Field Offset - * 7 = State Change Info - * all others are reserved for future use - * c = A specific value within the subclass. - * - * NOTE: Any new values should be added to the end of each subclass so that the - * codes remain consistent across firmware releases. - */ -typedef enum _MpiIocLogInfoFc -{ - MPI_IOCLOGINFO_FC_INIT_BASE = 0x20000000, - MPI_IOCLOGINFO_FC_INIT_ERROR_OUT_OF_ORDER_FRAME = 0x20000001, /* received an out of order frame - unsupported */ - MPI_IOCLOGINFO_FC_INIT_ERROR_BAD_START_OF_FRAME = 0x20000002, /* Bad Rx Frame, bad start of frame primative */ - MPI_IOCLOGINFO_FC_INIT_ERROR_BAD_END_OF_FRAME = 0x20000003, /* Bad Rx Frame, bad end of frame primative */ - MPI_IOCLOGINFO_FC_INIT_ERROR_OVER_RUN = 0x20000004, /* Bad Rx Frame, overrun */ - MPI_IOCLOGINFO_FC_INIT_ERROR_RX_OTHER = 0x20000005, /* Other errors caught by IOC which require retries */ - MPI_IOCLOGINFO_FC_INIT_ERROR_SUBPROC_DEAD = 0x20000006, /* Main processor could not initialize sub-processor */ - MPI_IOCLOGINFO_FC_INIT_ERROR_RX_OVERRUN = 0x20000007, /* Scatter Gather overrun */ - MPI_IOCLOGINFO_FC_INIT_ERROR_RX_BAD_STATUS = 0x20000008, /* Receiver detected context mismatch via invalid header */ - MPI_IOCLOGINFO_FC_INIT_ERROR_RX_UNEXPECTED_FRAME= 0x20000009, /* CtxMgr detected unsupported frame type */ - MPI_IOCLOGINFO_FC_INIT_ERROR_LINK_FAILURE = 0x2000000A, /* Link failure occurred */ - MPI_IOCLOGINFO_FC_INIT_ERROR_TX_TIMEOUT = 0x2000000B, /* Transmitter timeout error */ - - MPI_IOCLOGINFO_FC_TARGET_BASE = 0x21000000, - MPI_IOCLOGINFO_FC_TARGET_NO_PDISC = 0x21000001, /* not sent because we are waiting for a PDISC from the initiator */ - MPI_IOCLOGINFO_FC_TARGET_NO_LOGIN = 0x21000002, /* not sent because we are not logged in to the remote node */ - MPI_IOCLOGINFO_FC_TARGET_DOAR_KILLED_BY_LIP = 0x21000003, /* Data Out, Auto Response, not sent due to a LIP */ - MPI_IOCLOGINFO_FC_TARGET_DIAR_KILLED_BY_LIP = 0x21000004, /* Data In, Auto Response, not sent due to a LIP */ - MPI_IOCLOGINFO_FC_TARGET_DIAR_MISSING_DATA = 0x21000005, /* Data In, Auto Response, missing data frames */ - MPI_IOCLOGINFO_FC_TARGET_DONR_KILLED_BY_LIP = 0x21000006, /* Data Out, No Response, not sent due to a LIP */ - MPI_IOCLOGINFO_FC_TARGET_WRSP_KILLED_BY_LIP = 0x21000007, /* Auto-response after a write not sent due to a LIP */ - MPI_IOCLOGINFO_FC_TARGET_DINR_KILLED_BY_LIP = 0x21000008, /* Data In, No Response, not completed due to a LIP */ - MPI_IOCLOGINFO_FC_TARGET_DINR_MISSING_DATA = 0x21000009, /* Data In, No Response, missing data frames */ - MPI_IOCLOGINFO_FC_TARGET_MRSP_KILLED_BY_LIP = 0x2100000a, /* Manual Response not sent due to a LIP */ - MPI_IOCLOGINFO_FC_TARGET_NO_CLASS_3 = 0x2100000b, /* not sent because remote node does not support Class 3 */ - MPI_IOCLOGINFO_FC_TARGET_LOGIN_NOT_VALID = 0x2100000c, /* not sent because login to remote node not validated */ - MPI_IOCLOGINFO_FC_TARGET_FROM_OUTBOUND = 0x2100000e, /* cleared from the outbound queue after a logout */ - MPI_IOCLOGINFO_FC_TARGET_WAITING_FOR_DATA_IN = 0x2100000f, /* cleared waiting for data after a logout */ - - MPI_IOCLOGINFO_FC_LAN_BASE = 0x22000000, - MPI_IOCLOGINFO_FC_LAN_TRANS_SGL_MISSING = 0x22000001, /* Transaction Context Sgl Missing */ - MPI_IOCLOGINFO_FC_LAN_TRANS_WRONG_PLACE = 0x22000002, /* Transaction Context found before an EOB */ - MPI_IOCLOGINFO_FC_LAN_TRANS_RES_BITS_SET = 0x22000003, /* Transaction Context value has reserved bits set */ - MPI_IOCLOGINFO_FC_LAN_WRONG_SGL_FLAG = 0x22000004, /* Invalid SGL Flags */ - - MPI_IOCLOGINFO_FC_MSG_BASE = 0x23000000, - - MPI_IOCLOGINFO_FC_LINK_BASE = 0x24000000, - MPI_IOCLOGINFO_FC_LINK_LOOP_INIT_TIMEOUT = 0x24000001, /* Loop initialization timed out */ - MPI_IOCLOGINFO_FC_LINK_ALREADY_INITIALIZED = 0x24000002, /* Another system controller already initialized the loop */ - MPI_IOCLOGINFO_FC_LINK_LINK_NOT_ESTABLISHED = 0x24000003, /* Not synchronized to signal or still negotiating (possible cable problem) */ - MPI_IOCLOGINFO_FC_LINK_CRC_ERROR = 0x24000004, /* CRC check detected error on received frame */ - - MPI_IOCLOGINFO_FC_CTX_BASE = 0x25000000, - - MPI_IOCLOGINFO_FC_INVALID_FIELD_BYTE_OFFSET = 0x26000000, /* The lower 24 bits give the byte offset of the field in the request message that is invalid */ - MPI_IOCLOGINFO_FC_INVALID_FIELD_MAX_OFFSET = 0x26ffffff, - - MPI_IOCLOGINFO_FC_STATE_CHANGE = 0x27000000 /* The lower 24 bits give additional information concerning state change */ - -} MpiIocLogInfoFc_t; -/* $FreeBSD: /repoman/r/ncvs/src/sys/dev/mpt/mpilib/mpi.h,v 1.6 2005/07/10 15:05:39 scottl Exp $ */ -/*- - * Copyright (c) 2000-2005, LSI Logic Corporation and its contributors. - * All rights reserved. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions are - * met: - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce at minimum a disclaimer - * substantially similar to the "NO WARRANTY" disclaimer below - * ("Disclaimer") and any redistribution must be conditioned upon including - * a substantially similar Disclaimer requirement for further binary - * redistribution. - * 3. Neither the name of the LSI Logic Corporation nor the names of its - * contributors may be used to endorse or promote products derived from - * this software without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" - * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE - * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE - * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR - * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF - * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS - * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN - * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) - * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF THE COPYRIGHT - * OWNER OR CONTRIBUTOR IS ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - * - * Name: MPI.H - * Title: MPI Message independent structures and definitions - * Creation Date: July 27, 2000 - * - * MPI.H Version: 01.02.11 - * - * Version History - * --------------- - * - * Date Version Description - * -------- -------- ------------------------------------------------------ - * 05-08-00 00.10.01 Original release for 0.10 spec dated 4/26/2000. - * 05-24-00 00.10.02 Added MPI_IOCSTATUS_SCSI_RESIDUAL_MISMATCH definition. - * 06-06-00 01.00.01 Update MPI_VERSION_MAJOR and MPI_VERSION_MINOR. - * 06-22-00 01.00.02 Added MPI_IOCSTATUS_LAN_ definitions. - * Removed LAN_SUSPEND function definition. - * Added MPI_MSGFLAGS_CONTINUATION_REPLY definition. - * 06-30-00 01.00.03 Added MPI_CONTEXT_REPLY_TYPE_LAN definition. - * Added MPI_GET/SET_CONTEXT_REPLY_TYPE macros. - * 07-27-00 01.00.04 Added MPI_FAULT_ definitions. - * Removed MPI_IOCSTATUS_MSG/DATA_XFER_ERROR definitions. - * Added MPI_IOCSTATUS_INTERNAL_ERROR definition. - * Added MPI_IOCSTATUS_TARGET_XFER_COUNT_MISMATCH. - * 11-02-00 01.01.01 Original release for post 1.0 work. - * 12-04-00 01.01.02 Added new function codes. - * 01-09-01 01.01.03 Added more definitions to the system interface section - * Added MPI_IOCSTATUS_TARGET_STS_DATA_NOT_SENT. - * 01-25-01 01.01.04 Changed MPI_VERSION_MINOR from 0x00 to 0x01. - * 02-20-01 01.01.05 Started using MPI_POINTER. - * Fixed value for MPI_DIAG_RW_ENABLE. - * Added defines for MPI_DIAG_PREVENT_IOC_BOOT and - * MPI_DIAG_CLEAR_FLASH_BAD_SIG. - * Obsoleted MPI_IOCSTATUS_TARGET_FC_ defines. - * 02-27-01 01.01.06 Removed MPI_HOST_INDEX_REGISTER define. - * Added function codes for RAID. - * 04-09-01 01.01.07 Added alternate define for MPI_DOORBELL_ACTIVE, - * MPI_DOORBELL_USED, to better match the spec. - * 08-08-01 01.02.01 Original release for v1.2 work. - * Changed MPI_VERSION_MINOR from 0x01 to 0x02. - * Added define MPI_FUNCTION_TOOLBOX. - * 09-28-01 01.02.02 New function code MPI_SCSI_ENCLOSURE_PROCESSOR. - * 11-01-01 01.02.03 Changed name to MPI_FUNCTION_SCSI_ENCLOSURE_PROCESSOR. - * 03-14-02 01.02.04 Added MPI_HEADER_VERSION_ defines. - * 05-31-02 01.02.05 Bumped MPI_HEADER_VERSION_UNIT. - * 07-12-02 01.02.06 Added define for MPI_FUNCTION_MAILBOX. - * 09-16-02 01.02.07 Bumped value for MPI_HEADER_VERSION_UNIT. - * 11-15-02 01.02.08 Added define MPI_IOCSTATUS_TARGET_INVALID_IO_INDEX and - * obsoleted define MPI_IOCSTATUS_TARGET_INVALID_IOCINDEX. - * 04-01-03 01.02.09 New IOCStatus code: MPI_IOCSTATUS_FC_EXCHANGE_CANCELED - * 06-26-03 01.02.10 Bumped MPI_HEADER_VERSION_UNIT value. - * 01-16-04 01.02.11 Added define for MPI_IOCLOGINFO_TYPE_SHIFT. - * -------------------------------------------------------------------------- - */ - -#ifndef MPI_H -#define MPI_H - - -/***************************************************************************** -* -* M P I V e r s i o n D e f i n i t i o n s -* -*****************************************************************************/ - -#define MPI_VERSION_MAJOR (0x01) -#define MPI_VERSION_MINOR (0x02) -#define MPI_VERSION_MAJOR_MASK (0xFF00) -#define MPI_VERSION_MAJOR_SHIFT (8) -#define MPI_VERSION_MINOR_MASK (0x00FF) -#define MPI_VERSION_MINOR_SHIFT (0) -#define MPI_VERSION ((MPI_VERSION_MAJOR << MPI_VERSION_MAJOR_SHIFT) | \ - MPI_VERSION_MINOR) - -#define MPI_VERSION_01_00 (0x0100) -#define MPI_VERSION_01_01 (0x0101) -#define MPI_VERSION_01_02 (0x0102) -/* Note: The major versions of 0xe0 through 0xff are reserved */ - -/* versioning for this MPI header set */ -#define MPI_HEADER_VERSION_UNIT (0x0D) -#define MPI_HEADER_VERSION_DEV (0x00) -#define MPI_HEADER_VERSION_UNIT_MASK (0xFF00) -#define MPI_HEADER_VERSION_UNIT_SHIFT (8) -#define MPI_HEADER_VERSION_DEV_MASK (0x00FF) -#define MPI_HEADER_VERSION_DEV_SHIFT (0) -#define MPI_HEADER_VERSION ((MPI_HEADER_VERSION_UNIT << 8) | MPI_HEADER_VERSION_DEV) - -/***************************************************************************** -* -* I O C S t a t e D e f i n i t i o n s -* -*****************************************************************************/ - -#define MPI_IOC_STATE_RESET (0x00000000) -#define MPI_IOC_STATE_READY (0x10000000) -#define MPI_IOC_STATE_OPERATIONAL (0x20000000) -#define MPI_IOC_STATE_FAULT (0x40000000) - -#define MPI_IOC_STATE_MASK (0xF0000000) -#define MPI_IOC_STATE_SHIFT (28) - -/* Fault state codes (product independent range 0x8000-0xFFFF) */ - -#define MPI_FAULT_REQUEST_MESSAGE_PCI_PARITY_ERROR (0x8111) -#define MPI_FAULT_REQUEST_MESSAGE_PCI_BUS_FAULT (0x8112) -#define MPI_FAULT_REPLY_MESSAGE_PCI_PARITY_ERROR (0x8113) -#define MPI_FAULT_REPLY_MESSAGE_PCI_BUS_FAULT (0x8114) -#define MPI_FAULT_DATA_SEND_PCI_PARITY_ERROR (0x8115) -#define MPI_FAULT_DATA_SEND_PCI_BUS_FAULT (0x8116) -#define MPI_FAULT_DATA_RECEIVE_PCI_PARITY_ERROR (0x8117) -#define MPI_FAULT_DATA_RECEIVE_PCI_BUS_FAULT (0x8118) - - -/***************************************************************************** -* -* P C I S y s t e m I n t e r f a c e R e g i s t e r s -* -*****************************************************************************/ - -/* S y s t e m D o o r b e l l */ -#define MPI_DOORBELL_OFFSET (0x00000000) -#define MPI_DOORBELL_ACTIVE (0x08000000) /* DoorbellUsed */ -#define MPI_DOORBELL_USED (MPI_DOORBELL_ACTIVE) -#define MPI_DOORBELL_ACTIVE_SHIFT (27) -#define MPI_DOORBELL_WHO_INIT_MASK (0x07000000) -#define MPI_DOORBELL_WHO_INIT_SHIFT (24) -#define MPI_DOORBELL_FUNCTION_MASK (0xFF000000) -#define MPI_DOORBELL_FUNCTION_SHIFT (24) -#define MPI_DOORBELL_ADD_DWORDS_MASK (0x00FF0000) -#define MPI_DOORBELL_ADD_DWORDS_SHIFT (16) -#define MPI_DOORBELL_DATA_MASK (0x0000FFFF) - - -#define MPI_WRITE_SEQUENCE_OFFSET (0x00000004) -#define MPI_WRSEQ_KEY_VALUE_MASK (0x0000000F) -#define MPI_WRSEQ_1ST_KEY_VALUE (0x04) -#define MPI_WRSEQ_2ND_KEY_VALUE (0x0B) -#define MPI_WRSEQ_3RD_KEY_VALUE (0x02) -#define MPI_WRSEQ_4TH_KEY_VALUE (0x07) -#define MPI_WRSEQ_5TH_KEY_VALUE (0x0D) - -#define MPI_DIAGNOSTIC_OFFSET (0x00000008) -#define MPI_DIAG_CLEAR_FLASH_BAD_SIG (0x00000400) -#define MPI_DIAG_PREVENT_IOC_BOOT (0x00000200) -#define MPI_DIAG_DRWE (0x00000080) -#define MPI_DIAG_FLASH_BAD_SIG (0x00000040) -#define MPI_DIAG_RESET_HISTORY (0x00000020) -#define MPI_DIAG_RW_ENABLE (0x00000010) -#define MPI_DIAG_RESET_ADAPTER (0x00000004) -#define MPI_DIAG_DISABLE_ARM (0x00000002) -#define MPI_DIAG_MEM_ENABLE (0x00000001) - -#define MPI_TEST_BASE_ADDRESS_OFFSET (0x0000000C) - -#define MPI_DIAG_RW_DATA_OFFSET (0x00000010) - -#define MPI_DIAG_RW_ADDRESS_OFFSET (0x00000014) - -#define MPI_HOST_INTERRUPT_STATUS_OFFSET (0x00000030) -#define MPI_HIS_IOP_DOORBELL_STATUS (0x80000000) -#define MPI_HIS_REPLY_MESSAGE_INTERRUPT (0x00000008) -#define MPI_HIS_DOORBELL_INTERRUPT (0x00000001) - -#define MPI_HOST_INTERRUPT_MASK_OFFSET (0x00000034) -#define MPI_HIM_RIM (0x00000008) -#define MPI_HIM_DIM (0x00000001) - -#define MPI_REQUEST_QUEUE_OFFSET (0x00000040) -#define MPI_REQUEST_POST_FIFO_OFFSET (0x00000040) - -#define MPI_REPLY_QUEUE_OFFSET (0x00000044) -#define MPI_REPLY_POST_FIFO_OFFSET (0x00000044) -#define MPI_REPLY_FREE_FIFO_OFFSET (0x00000044) - - - -/***************************************************************************** -* -* M e s s a g e F r a m e D e s c r i p t o r s -* -*****************************************************************************/ - -#define MPI_REQ_MF_DESCRIPTOR_NB_MASK (0x00000003) -#define MPI_REQ_MF_DESCRIPTOR_F_BIT (0x00000004) -#define MPI_REQ_MF_DESCRIPTOR_ADDRESS_MASK (0xFFFFFFF8) - -#define MPI_ADDRESS_REPLY_A_BIT (0x80000000) -#define MPI_ADDRESS_REPLY_ADDRESS_MASK (0x7FFFFFFF) - -#define MPI_CONTEXT_REPLY_A_BIT (0x80000000) -#define MPI_CONTEXT_REPLY_TYPE_MASK (0x60000000) -#define MPI_CONTEXT_REPLY_TYPE_SCSI_INIT (0x00) -#define MPI_CONTEXT_REPLY_TYPE_SCSI_TARGET (0x01) -#define MPI_CONTEXT_REPLY_TYPE_LAN (0x02) -#define MPI_CONTEXT_REPLY_TYPE_SHIFT (29) -#define MPI_CONTEXT_REPLY_CONTEXT_MASK (0x1FFFFFFF) - - -/****************************************************************************/ -/* Context Reply macros */ -/****************************************************************************/ - -#define MPI_GET_CONTEXT_REPLY_TYPE(x) (((x) & MPI_CONTEXT_REPLY_TYPE_MASK) \ - >> MPI_CONTEXT_REPLY_TYPE_SHIFT) - -#define MPI_SET_CONTEXT_REPLY_TYPE(x, typ) \ - ((x) = ((x) & ~MPI_CONTEXT_REPLY_TYPE_MASK) | \ - (((typ) << MPI_CONTEXT_REPLY_TYPE_SHIFT) & \ - MPI_CONTEXT_REPLY_TYPE_MASK)) - - -/***************************************************************************** -* -* M e s s a g e F u n c t i o n s -* 0x80 -> 0x8F reserved for private message use per product -* -* -*****************************************************************************/ - -#define MPI_FUNCTION_SCSI_IO_REQUEST (0x00) -#define MPI_FUNCTION_SCSI_TASK_MGMT (0x01) -#define MPI_FUNCTION_IOC_INIT (0x02) -#define MPI_FUNCTION_IOC_FACTS (0x03) -#define MPI_FUNCTION_CONFIG (0x04) -#define MPI_FUNCTION_PORT_FACTS (0x05) -#define MPI_FUNCTION_PORT_ENABLE (0x06) -#define MPI_FUNCTION_EVENT_NOTIFICATION (0x07) -#define MPI_FUNCTION_EVENT_ACK (0x08) -#define MPI_FUNCTION_FW_DOWNLOAD (0x09) -#define MPI_FUNCTION_TARGET_CMD_BUFFER_POST (0x0A) -#define MPI_FUNCTION_TARGET_ASSIST (0x0B) -#define MPI_FUNCTION_TARGET_STATUS_SEND (0x0C) -#define MPI_FUNCTION_TARGET_MODE_ABORT (0x0D) -#define MPI_FUNCTION_TARGET_FC_BUF_POST_LINK_SRVC (0x0E) /* obsolete name */ -#define MPI_FUNCTION_TARGET_FC_RSP_LINK_SRVC (0x0F) /* obsolete name */ -#define MPI_FUNCTION_TARGET_FC_EX_SEND_LINK_SRVC (0x10) /* obsolete name */ -#define MPI_FUNCTION_TARGET_FC_ABORT (0x11) /* obsolete name */ -#define MPI_FUNCTION_FC_LINK_SRVC_BUF_POST (0x0E) -#define MPI_FUNCTION_FC_LINK_SRVC_RSP (0x0F) -#define MPI_FUNCTION_FC_EX_LINK_SRVC_SEND (0x10) -#define MPI_FUNCTION_FC_ABORT (0x11) -#define MPI_FUNCTION_FW_UPLOAD (0x12) -#define MPI_FUNCTION_FC_COMMON_TRANSPORT_SEND (0x13) -#define MPI_FUNCTION_FC_PRIMITIVE_SEND (0x14) - -#define MPI_FUNCTION_RAID_ACTION (0x15) -#define MPI_FUNCTION_RAID_SCSI_IO_PASSTHROUGH (0x16) - -#define MPI_FUNCTION_TOOLBOX (0x17) - -#define MPI_FUNCTION_SCSI_ENCLOSURE_PROCESSOR (0x18) - -#define MPI_FUNCTION_MAILBOX (0x19) - -#define MPI_FUNCTION_LAN_SEND (0x20) -#define MPI_FUNCTION_LAN_RECEIVE (0x21) -#define MPI_FUNCTION_LAN_RESET (0x22) - -#define MPI_FUNCTION_IOC_MESSAGE_UNIT_RESET (0x40) -#define MPI_FUNCTION_IO_UNIT_RESET (0x41) -#define MPI_FUNCTION_HANDSHAKE (0x42) -#define MPI_FUNCTION_REPLY_FRAME_REMOVAL (0x43) - - - -/***************************************************************************** -* -* S c a t t e r G a t h e r E l e m e n t s -* -*****************************************************************************/ - -/****************************************************************************/ -/* Simple element structures */ -/****************************************************************************/ - -typedef struct _SGE_SIMPLE32 -{ - U32 FlagsLength; - U32 Address; -} SGE_SIMPLE32, MPI_POINTER PTR_SGE_SIMPLE32, - SGESimple32_t, MPI_POINTER pSGESimple32_t; - -typedef struct _SGE_SIMPLE64 -{ - U32 FlagsLength; - U64 Address; -} SGE_SIMPLE64, MPI_POINTER PTR_SGE_SIMPLE64, - SGESimple64_t, MPI_POINTER pSGESimple64_t; - -typedef struct _SGE_SIMPLE_UNION -{ - U32 FlagsLength; - union - { - U32 Address32; - U64 Address64; - }u; -} SGESimpleUnion_t, MPI_POINTER pSGESimpleUnion_t, - SGE_SIMPLE_UNION, MPI_POINTER PTR_SGE_SIMPLE_UNION; - -/****************************************************************************/ -/* Chain element structures */ -/****************************************************************************/ - -typedef struct _SGE_CHAIN32 -{ - U16 Length; - U8 NextChainOffset; - U8 Flags; - U32 Address; -} SGE_CHAIN32, MPI_POINTER PTR_SGE_CHAIN32, - SGEChain32_t, MPI_POINTER pSGEChain32_t; - -typedef struct _SGE_CHAIN64 -{ - U16 Length; - U8 NextChainOffset; - U8 Flags; - U64 Address; -} SGE_CHAIN64, MPI_POINTER PTR_SGE_CHAIN64, - SGEChain64_t, MPI_POINTER pSGEChain64_t; - -typedef struct _SGE_CHAIN_UNION -{ - U16 Length; - U8 NextChainOffset; - U8 Flags; - union - { - U32 Address32; - U64 Address64; - }u; -} SGE_CHAIN_UNION, MPI_POINTER PTR_SGE_CHAIN_UNION, - SGEChainUnion_t, MPI_POINTER pSGEChainUnion_t; - -/****************************************************************************/ -/* Transaction Context element */ -/****************************************************************************/ - -typedef struct _SGE_TRANSACTION32 -{ - U8 Reserved; - U8 ContextSize; - U8 DetailsLength; - U8 Flags; - U32 TransactionContext[1]; - U32 TransactionDetails[1]; -} SGE_TRANSACTION32, MPI_POINTER PTR_SGE_TRANSACTION32, - SGETransaction32_t, MPI_POINTER pSGETransaction32_t; - -typedef struct _SGE_TRANSACTION64 -{ - U8 Reserved; - U8 ContextSize; - U8 DetailsLength; - U8 Flags; - U32 TransactionContext[2]; - U32 TransactionDetails[1]; -} SGE_TRANSACTION64, MPI_POINTER PTR_SGE_TRANSACTION64, - SGETransaction64_t, MPI_POINTER pSGETransaction64_t; - -typedef struct _SGE_TRANSACTION96 -{ - U8 Reserved; - U8 ContextSize; - U8 DetailsLength; - U8 Flags; - U32 TransactionContext[3]; - U32 TransactionDetails[1]; -} SGE_TRANSACTION96, MPI_POINTER PTR_SGE_TRANSACTION96, - SGETransaction96_t, MPI_POINTER pSGETransaction96_t; - -typedef struct _SGE_TRANSACTION128 -{ - U8 Reserved; - U8 ContextSize; - U8 DetailsLength; - U8 Flags; - U32 TransactionContext[4]; - U32 TransactionDetails[1]; -} SGE_TRANSACTION128, MPI_POINTER PTR_SGE_TRANSACTION128, - SGETransaction_t128, MPI_POINTER pSGETransaction_t128; - -typedef struct _SGE_TRANSACTION_UNION -{ - U8 Reserved; - U8 ContextSize; - U8 DetailsLength; - U8 Flags; - union - { - U32 TransactionContext32[1]; - U32 TransactionContext64[2]; - U32 TransactionContext96[3]; - U32 TransactionContext128[4]; - }u; - U32 TransactionDetails[1]; -} SGE_TRANSACTION_UNION, MPI_POINTER PTR_SGE_TRANSACTION_UNION, - SGETransactionUnion_t, MPI_POINTER pSGETransactionUnion_t; - - -/****************************************************************************/ -/* SGE IO types union for IO SGL's */ -/****************************************************************************/ - -typedef struct _SGE_IO_UNION -{ - union - { - SGE_SIMPLE_UNION Simple; - SGE_CHAIN_UNION Chain; - } u; -} SGE_IO_UNION, MPI_POINTER PTR_SGE_IO_UNION, - SGEIOUnion_t, MPI_POINTER pSGEIOUnion_t; - -/****************************************************************************/ -/* SGE union for SGL's with Simple and Transaction elements */ -/****************************************************************************/ - -typedef struct _SGE_TRANS_SIMPLE_UNION -{ - union - { - SGE_SIMPLE_UNION Simple; - SGE_TRANSACTION_UNION Transaction; - } u; -} SGE_TRANS_SIMPLE_UNION, MPI_POINTER PTR_SGE_TRANS_SIMPLE_UNION, - SGETransSimpleUnion_t, MPI_POINTER pSGETransSimpleUnion_t; - -/****************************************************************************/ -/* All SGE types union */ -/****************************************************************************/ - -typedef struct _SGE_MPI_UNION -{ - union - { - SGE_SIMPLE_UNION Simple; - SGE_CHAIN_UNION Chain; - SGE_TRANSACTION_UNION Transaction; - } u; -} SGE_MPI_UNION, MPI_POINTER PTR_SGE_MPI_UNION, - MPI_SGE_UNION_t, MPI_POINTER pMPI_SGE_UNION_t, - SGEAllUnion_t, MPI_POINTER pSGEAllUnion_t; - - -/****************************************************************************/ -/* SGE field definition and masks */ -/****************************************************************************/ - -/* Flags field bit definitions */ - -#define MPI_SGE_FLAGS_LAST_ELEMENT (0x80) -#define MPI_SGE_FLAGS_END_OF_BUFFER (0x40) -#define MPI_SGE_FLAGS_ELEMENT_TYPE_MASK (0x30) -#define MPI_SGE_FLAGS_LOCAL_ADDRESS (0x08) -#define MPI_SGE_FLAGS_DIRECTION (0x04) -#define MPI_SGE_FLAGS_ADDRESS_SIZE (0x02) -#define MPI_SGE_FLAGS_END_OF_LIST (0x01) - -#define MPI_SGE_FLAGS_SHIFT (24) - -#define MPI_SGE_LENGTH_MASK (0x00FFFFFF) -#define MPI_SGE_CHAIN_LENGTH_MASK (0x0000FFFF) - -/* Element Type */ - -#define MPI_SGE_FLAGS_TRANSACTION_ELEMENT (0x00) -#define MPI_SGE_FLAGS_SIMPLE_ELEMENT (0x10) -#define MPI_SGE_FLAGS_CHAIN_ELEMENT (0x30) -#define MPI_SGE_FLAGS_ELEMENT_MASK (0x30) - -/* Address location */ - -#define MPI_SGE_FLAGS_SYSTEM_ADDRESS (0x00) - -/* Direction */ - -#define MPI_SGE_FLAGS_IOC_TO_HOST (0x00) -#define MPI_SGE_FLAGS_HOST_TO_IOC (0x04) - -/* Address Size */ - -#define MPI_SGE_FLAGS_32_BIT_ADDRESSING (0x00) -#define MPI_SGE_FLAGS_64_BIT_ADDRESSING (0x02) - -/* Context Size */ - -#define MPI_SGE_FLAGS_32_BIT_CONTEXT (0x00) -#define MPI_SGE_FLAGS_64_BIT_CONTEXT (0x02) -#define MPI_SGE_FLAGS_96_BIT_CONTEXT (0x04) -#define MPI_SGE_FLAGS_128_BIT_CONTEXT (0x06) - -#define MPI_SGE_CHAIN_OFFSET_MASK (0x00FF0000) -#define MPI_SGE_CHAIN_OFFSET_SHIFT (16) - - -/****************************************************************************/ -/* SGE operation Macros */ -/****************************************************************************/ - - /* SIMPLE FlagsLength manipulations... */ -#define MPI_SGE_SET_FLAGS(f) ((U32)(f) << MPI_SGE_FLAGS_SHIFT) -#define MPI_SGE_GET_FLAGS(fl) (((fl) & ~MPI_SGE_LENGTH_MASK) >> MPI_SGE_FLAGS_SHIFT) -#define MPI_SGE_LENGTH(fl) ((fl) & MPI_SGE_LENGTH_MASK) -#define MPI_SGE_CHAIN_LENGTH(fl) ((fl) & MPI_SGE_CHAIN_LENGTH_MASK) - -#define MPI_SGE_SET_FLAGS_LENGTH(f,l) (MPI_SGE_SET_FLAGS(f) | MPI_SGE_LENGTH(l)) - -#define MPI_pSGE_GET_FLAGS(psg) MPI_SGE_GET_FLAGS((psg)->FlagsLength) -#define MPI_pSGE_GET_LENGTH(psg) MPI_SGE_LENGTH((psg)->FlagsLength) -#define MPI_pSGE_SET_FLAGS_LENGTH(psg,f,l) (psg)->FlagsLength = MPI_SGE_SET_FLAGS_LENGTH(f,l) - /* CAUTION - The following are READ-MODIFY-WRITE! */ -#define MPI_pSGE_SET_FLAGS(psg,f) (psg)->FlagsLength |= MPI_SGE_SET_FLAGS(f) -#define MPI_pSGE_SET_LENGTH(psg,l) (psg)->FlagsLength |= MPI_SGE_LENGTH(l) - -#define MPI_GET_CHAIN_OFFSET(x) ((x&MPI_SGE_CHAIN_OFFSET_MASK)>>MPI_SGE_CHAIN_OFFSET_SHIFT) - - - -/***************************************************************************** -* -* S t a n d a r d M e s s a g e S t r u c t u r e s -* -*****************************************************************************/ - -/****************************************************************************/ -/* Standard message request header for all request messages */ -/****************************************************************************/ - -typedef struct _MSG_REQUEST_HEADER -{ - U8 Reserved[2]; /* function specific */ - U8 ChainOffset; - U8 Function; - U8 Reserved1[3]; /* function specific */ - U8 MsgFlags; - U32 MsgContext; -} MSG_REQUEST_HEADER, MPI_POINTER PTR_MSG_REQUEST_HEADER, - MPIHeader_t, MPI_POINTER pMPIHeader_t; - - -/****************************************************************************/ -/* Default Reply */ -/****************************************************************************/ - -typedef struct _MSG_DEFAULT_REPLY -{ - U8 Reserved[2]; /* function specific */ - U8 MsgLength; - U8 Function; - U8 Reserved1[3]; /* function specific */ - U8 MsgFlags; - U32 MsgContext; - U8 Reserved2[2]; /* function specific */ - U16 IOCStatus; - U32 IOCLogInfo; -} MSG_DEFAULT_REPLY, MPI_POINTER PTR_MSG_DEFAULT_REPLY, - MPIDefaultReply_t, MPI_POINTER pMPIDefaultReply_t; - - -/* MsgFlags definition for all replies */ - -#define MPI_MSGFLAGS_CONTINUATION_REPLY (0x80) - - -/***************************************************************************** -* -* I O C S t a t u s V a l u e s -* -*****************************************************************************/ - -/****************************************************************************/ -/* Common IOCStatus values for all replies */ -/****************************************************************************/ - -#define MPI_IOCSTATUS_SUCCESS (0x0000) -#define MPI_IOCSTATUS_INVALID_FUNCTION (0x0001) -#define MPI_IOCSTATUS_BUSY (0x0002) -#define MPI_IOCSTATUS_INVALID_SGL (0x0003) -#define MPI_IOCSTATUS_INTERNAL_ERROR (0x0004) -#define MPI_IOCSTATUS_RESERVED (0x0005) -#define MPI_IOCSTATUS_INSUFFICIENT_RESOURCES (0x0006) -#define MPI_IOCSTATUS_INVALID_FIELD (0x0007) -#define MPI_IOCSTATUS_INVALID_STATE (0x0008) - -/****************************************************************************/ -/* Config IOCStatus values */ -/****************************************************************************/ - -#define MPI_IOCSTATUS_CONFIG_INVALID_ACTION (0x0020) -#define MPI_IOCSTATUS_CONFIG_INVALID_TYPE (0x0021) -#define MPI_IOCSTATUS_CONFIG_INVALID_PAGE (0x0022) -#define MPI_IOCSTATUS_CONFIG_INVALID_DATA (0x0023) -#define MPI_IOCSTATUS_CONFIG_NO_DEFAULTS (0x0024) -#define MPI_IOCSTATUS_CONFIG_CANT_COMMIT (0x0025) - -/****************************************************************************/ -/* SCSIIO Reply (SPI & FCP) initiator values */ -/****************************************************************************/ - -#define MPI_IOCSTATUS_SCSI_RECOVERED_ERROR (0x0040) -#define MPI_IOCSTATUS_SCSI_INVALID_BUS (0x0041) -#define MPI_IOCSTATUS_SCSI_INVALID_TARGETID (0x0042) -#define MPI_IOCSTATUS_SCSI_DEVICE_NOT_THERE (0x0043) -#define MPI_IOCSTATUS_SCSI_DATA_OVERRUN (0x0044) -#define MPI_IOCSTATUS_SCSI_DATA_UNDERRUN (0x0045) -#define MPI_IOCSTATUS_SCSI_IO_DATA_ERROR (0x0046) -#define MPI_IOCSTATUS_SCSI_PROTOCOL_ERROR (0x0047) -#define MPI_IOCSTATUS_SCSI_TASK_TERMINATED (0x0048) -#define MPI_IOCSTATUS_SCSI_RESIDUAL_MISMATCH (0x0049) -#define MPI_IOCSTATUS_SCSI_TASK_MGMT_FAILED (0x004A) -#define MPI_IOCSTATUS_SCSI_IOC_TERMINATED (0x004B) -#define MPI_IOCSTATUS_SCSI_EXT_TERMINATED (0x004C) - -/****************************************************************************/ -/* SCSI (SPI & FCP) target values */ -/****************************************************************************/ - -#define MPI_IOCSTATUS_TARGET_PRIORITY_IO (0x0060) -#define MPI_IOCSTATUS_TARGET_INVALID_PORT (0x0061) -#define MPI_IOCSTATUS_TARGET_INVALID_IOCINDEX (0x0062) /* obsolete */ -#define MPI_IOCSTATUS_TARGET_INVALID_IO_INDEX (0x0062) -#define MPI_IOCSTATUS_TARGET_ABORTED (0x0063) -#define MPI_IOCSTATUS_TARGET_NO_CONN_RETRYABLE (0x0064) -#define MPI_IOCSTATUS_TARGET_NO_CONNECTION (0x0065) -#define MPI_IOCSTATUS_TARGET_XFER_COUNT_MISMATCH (0x006A) -#define MPI_IOCSTATUS_TARGET_STS_DATA_NOT_SENT (0x006B) - -/****************************************************************************/ -/* Additional FCP target values */ -/****************************************************************************/ - -#define MPI_IOCSTATUS_TARGET_FC_ABORTED (0x0066) /* obsolete */ -#define MPI_IOCSTATUS_TARGET_FC_RX_ID_INVALID (0x0067) /* obsolete */ -#define MPI_IOCSTATUS_TARGET_FC_DID_INVALID (0x0068) /* obsolete */ -#define MPI_IOCSTATUS_TARGET_FC_NODE_LOGGED_OUT (0x0069) /* obsolete */ - -/****************************************************************************/ -/* Fibre Channel Direct Access values */ -/****************************************************************************/ - -#define MPI_IOCSTATUS_FC_ABORTED (0x0066) -#define MPI_IOCSTATUS_FC_RX_ID_INVALID (0x0067) -#define MPI_IOCSTATUS_FC_DID_INVALID (0x0068) -#define MPI_IOCSTATUS_FC_NODE_LOGGED_OUT (0x0069) -#define MPI_IOCSTATUS_FC_EXCHANGE_CANCELED (0x006C) - -/****************************************************************************/ -/* LAN values */ -/****************************************************************************/ - -#define MPI_IOCSTATUS_LAN_DEVICE_NOT_FOUND (0x0080) -#define MPI_IOCSTATUS_LAN_DEVICE_FAILURE (0x0081) -#define MPI_IOCSTATUS_LAN_TRANSMIT_ERROR (0x0082) -#define MPI_IOCSTATUS_LAN_TRANSMIT_ABORTED (0x0083) -#define MPI_IOCSTATUS_LAN_RECEIVE_ERROR (0x0084) -#define MPI_IOCSTATUS_LAN_RECEIVE_ABORTED (0x0085) -#define MPI_IOCSTATUS_LAN_PARTIAL_PACKET (0x0086) -#define MPI_IOCSTATUS_LAN_CANCELED (0x0087) - - -/****************************************************************************/ -/* IOCStatus flag to indicate that log info is available */ -/****************************************************************************/ - -#define MPI_IOCSTATUS_FLAG_LOG_INFO_AVAILABLE (0x8000) -#define MPI_IOCSTATUS_MASK (0x7FFF) - -/****************************************************************************/ -/* LogInfo Types */ -/****************************************************************************/ - -#define MPI_IOCLOGINFO_TYPE_MASK (0xF0000000) -#define MPI_IOCLOGINFO_TYPE_SHIFT (28) -#define MPI_IOCLOGINFO_TYPE_NONE (0x0) -#define MPI_IOCLOGINFO_TYPE_SCSI (0x1) -#define MPI_IOCLOGINFO_TYPE_FC (0x2) -#define MPI_IOCLOGINFO_LOG_DATA_MASK (0x0FFFFFFF) - - -#endif -/* $FreeBSD: /repoman/r/ncvs/src/sys/dev/mpt/mpilib/mpi_cnfg.h,v 1.6 2005/07/10 15:05:39 scottl Exp $ */ -/*- - * Copyright (c) 2000-2005, LSI Logic Corporation and its contributors. - * All rights reserved. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions are - * met: - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce at minimum a disclaimer - * substantially similar to the "NO WARRANTY" disclaimer below - * ("Disclaimer") and any redistribution must be conditioned upon including - * a substantially similar Disclaimer requirement for further binary - * redistribution. - * 3. Neither the name of the LSI Logic Corporation nor the names of its - * contributors may be used to endorse or promote products derived from - * this software without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" - * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE - * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE - * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR - * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF - * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS - * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN - * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) - * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF THE COPYRIGHT - * OWNER OR CONTRIBUTOR IS ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - * - * Name: MPI_CNFG.H - * Title: MPI Config message, structures, and Pages - * Creation Date: July 27, 2000 - * - * MPI_CNFG.H Version: 01.02.13 - * - * Version History - * --------------- - * - * Date Version Description - * -------- -------- ------------------------------------------------------ - * 05-08-00 00.10.01 Original release for 0.10 spec dated 4/26/2000. - * 06-06-00 01.00.01 Update version number for 1.0 release. - * 06-08-00 01.00.02 Added _PAGEVERSION definitions for all pages. - * Added FcPhLowestVersion, FcPhHighestVersion, Reserved2 - * fields to FC_DEVICE_0 page, updated the page version. - * Changed _FREE_RUNNING_CLOCK to _PACING_TRANSFERS in - * SCSI_PORT_0, SCSI_DEVICE_0 and SCSI_DEVICE_1 pages - * and updated the page versions. - * Added _RESPONSE_ID_MASK definition to SCSI_PORT_1 - * page and updated the page version. - * Added Information field and _INFO_PARAMS_NEGOTIATED - * definitionto SCSI_DEVICE_0 page. - * 06-22-00 01.00.03 Removed batch controls from LAN_0 page and updated the - * page version. - * Added BucketsRemaining to LAN_1 page, redefined the - * state values, and updated the page version. - * Revised bus width definitions in SCSI_PORT_0, - * SCSI_DEVICE_0 and SCSI_DEVICE_1 pages. - * 06-30-00 01.00.04 Added MaxReplySize to LAN_1 page and updated the page - * version. - * Moved FC_DEVICE_0 PageAddress description to spec. - * 07-27-00 01.00.05 Corrected the SubsystemVendorID and SubsystemID field - * widths in IOC_0 page and updated the page version. - * 11-02-00 01.01.01 Original release for post 1.0 work - * Added Manufacturing pages, IO Unit Page 2, SCSI SPI - * Port Page 2, FC Port Page 4, FC Port Page 5 - * 11-15-00 01.01.02 Interim changes to match proposals - * 12-04-00 01.01.03 Config page changes to match MPI rev 1.00.01. - * 12-05-00 01.01.04 Modified config page actions. - * 01-09-01 01.01.05 Added defines for page address formats. - * Data size for Manufacturing pages 2 and 3 no longer - * defined here. - * Io Unit Page 2 size is fixed at 4 adapters and some - * flags were changed. - * SCSI Port Page 2 Device Settings modified. - * New fields added to FC Port Page 0 and some flags - * cleaned up. - * Removed impedance flash from FC Port Page 1. - * Added FC Port pages 6 and 7. - * 01-25-01 01.01.06 Added MaxInitiators field to FcPortPage0. - * 01-29-01 01.01.07 Changed some defines to make them 32 character unique. - * Added some LinkType defines for FcPortPage0. - * 02-20-01 01.01.08 Started using MPI_POINTER. - * 02-27-01 01.01.09 Replaced MPI_CONFIG_PAGETYPE_SCSI_LUN with - * MPI_CONFIG_PAGETYPE_RAID_VOLUME. - * Added definitions and structures for IOC Page 2 and - * RAID Volume Page 2. - * 03-27-01 01.01.10 Added CONFIG_PAGE_FC_PORT_8 and CONFIG_PAGE_FC_PORT_9. - * CONFIG_PAGE_FC_PORT_3 now supports persistent by DID. - * Added VendorId and ProductRevLevel fields to - * RAIDVOL2_IM_PHYS_ID struct. - * Modified values for MPI_FCPORTPAGE0_FLAGS_ATTACH_ - * defines to make them compatible to MPI version 1.0. - * Added structure offset comments. - * 04-09-01 01.01.11 Added some new defines for the PageAddress field and - * removed some obsolete ones. - * Added IO Unit Page 3. - * Modified defines for Scsi Port Page 2. - * Modified RAID Volume Pages. - * 08-08-01 01.02.01 Original release for v1.2 work. - * Added SepID and SepBus to RVP2 IMPhysicalDisk struct. - * Added defines for the SEP bits in RVP2 VolumeSettings. - * Modified the DeviceSettings field in RVP2 to use the - * proper structure. - * Added defines for SES, SAF-TE, and cross channel for - * IOCPage2 CapabilitiesFlags. - * Removed define for MPI_IOUNITPAGE2_FLAGS_RAID_DISABLE. - * Removed define for - * MPI_SCSIPORTPAGE2_PORT_FLAGS_PARITY_ENABLE. - * Added define for MPI_CONFIG_PAGEATTR_RO_PERSISTENT. - * 08-29-01 01.02.02 Fixed value for MPI_MANUFACTPAGE_DEVID_53C1035. - * Added defines for MPI_FCPORTPAGE1_FLAGS_HARD_ALPA_ONLY - * and MPI_FCPORTPAGE1_FLAGS_IMMEDIATE_ERROR_REPLY. - * Removed MPI_SCSIPORTPAGE0_CAP_PACING_TRANSFERS, - * MPI_SCSIDEVPAGE0_NP_PACING_TRANSFERS, and - * MPI_SCSIDEVPAGE1_RP_PACING_TRANSFERS, and - * MPI_SCSIDEVPAGE1_CONF_PPR_ALLOWED. - * Added defines for MPI_SCSIDEVPAGE1_CONF_WDTR_DISALLOWED - * and MPI_SCSIDEVPAGE1_CONF_SDTR_DISALLOWED. - * Added OnBusTimerValue to CONFIG_PAGE_SCSI_PORT_1. - * Added rejected bits to SCSI Device Page 0 Information. - * Increased size of ALPA array in FC Port Page 2 by one - * and removed a one byte reserved field. - * 09-28-01 01.02.03 Swapped NegWireSpeedLow and NegWireSpeedLow in - * CONFIG_PAGE_LAN_1 to match preferred 64-bit ordering. - * Added structures for Manufacturing Page 4, IO Unit - * Page 3, IOC Page 3, IOC Page 4, RAID Volume Page 0, and - * RAID PhysDisk Page 0. - * 10-04-01 01.02.04 Added define for MPI_CONFIG_PAGETYPE_RAID_PHYSDISK. - * Modified some of the new defines to make them 32 - * character unique. - * Modified how variable length pages (arrays) are defined. - * Added generic defines for hot spare pools and RAID - * volume types. - * 11-01-01 01.02.05 Added define for MPI_IOUNITPAGE1_DISABLE_IR. - * 03-14-02 01.02.06 Added PCISlotNum field to CONFIG_PAGE_IOC_1 along with - * related define, and bumped the page version define. - * 05-31-02 01.02.07 Added a Flags field to CONFIG_PAGE_IOC_2_RAID_VOL in a - * reserved byte and added a define. - * Added define for - * MPI_RAIDVOL0_STATUS_FLAG_VOLUME_INACTIVE. - * Added new config page: CONFIG_PAGE_IOC_5. - * Added MaxAliases, MaxHardAliases, and NumCurrentAliases - * fields to CONFIG_PAGE_FC_PORT_0. - * Added AltConnector and NumRequestedAliases fields to - * CONFIG_PAGE_FC_PORT_1. - * Added new config page: CONFIG_PAGE_FC_PORT_10. - * 07-12-02 01.02.08 Added more MPI_MANUFACTPAGE_DEVID_ defines. - * Added additional MPI_SCSIDEVPAGE0_NP_ defines. - * Added more MPI_SCSIDEVPAGE1_RP_ defines. - * Added define for - * MPI_SCSIDEVPAGE1_CONF_EXTENDED_PARAMS_ENABLE. - * Added new config page: CONFIG_PAGE_SCSI_DEVICE_3. - * Modified MPI_FCPORTPAGE5_FLAGS_ defines. - * 09-16-02 01.02.09 Added MPI_SCSIDEVPAGE1_CONF_FORCE_PPR_MSG define. - * 11-15-02 01.02.10 Added ConnectedID defines for CONFIG_PAGE_SCSI_PORT_0. - * Added more Flags defines for CONFIG_PAGE_FC_PORT_1. - * Added more Flags defines for CONFIG_PAGE_FC_DEVICE_0. - * 04-01-03 01.02.11 Added RR_TOV field and additional Flags defines for - * CONFIG_PAGE_FC_PORT_1. - * Added define MPI_FCPORTPAGE5_FLAGS_DISABLE to disable - * an alias. - * Added more device id defines. - * 06-26-03 01.02.12 Added MPI_IOUNITPAGE1_IR_USE_STATIC_VOLUME_ID define. - * Added TargetConfig and IDConfig fields to - * CONFIG_PAGE_SCSI_PORT_1. - * Added more PortFlags defines for CONFIG_PAGE_SCSI_PORT_2 - * to control DV. - * Added more Flags defines for CONFIG_PAGE_FC_PORT_1. - * In CONFIG_PAGE_FC_DEVICE_0, replaced Reserved1 field - * with ADISCHardALPA. - * Added MPI_FC_DEVICE_PAGE0_PROT_FCP_RETRY define. - * 01-16-04 01.02.13 Added InitiatorDeviceTimeout and InitiatorIoPendTimeout - * fields and related defines to CONFIG_PAGE_FC_PORT_1. - * Added define for - * MPI_FCPORTPAGE1_FLAGS_SOFT_ALPA_FALLBACK. - * Added new fields to the substructures of - * CONFIG_PAGE_FC_PORT_10. - * -------------------------------------------------------------------------- - */ - -#ifndef MPI_CNFG_H -#define MPI_CNFG_H - - -/***************************************************************************** -* -* C o n f i g M e s s a g e a n d S t r u c t u r e s -* -*****************************************************************************/ - -typedef struct _CONFIG_PAGE_HEADER -{ - U8 PageVersion; /* 00h */ - U8 PageLength; /* 01h */ - U8 PageNumber; /* 02h */ - U8 PageType; /* 03h */ -} CONFIG_PAGE_HEADER, MPI_POINTER PTR_CONFIG_PAGE_HEADER, - ConfigPageHeader_t, MPI_POINTER pConfigPageHeader_t; - -typedef union _CONFIG_PAGE_HEADER_UNION -{ - ConfigPageHeader_t Struct; - U8 Bytes[4]; - U16 Word16[2]; - U32 Word32; -} ConfigPageHeaderUnion, MPI_POINTER pConfigPageHeaderUnion, - CONFIG_PAGE_HEADER_UNION, MPI_POINTER PTR_CONFIG_PAGE_HEADER_UNION; - - -/**************************************************************************** -* PageType field values -****************************************************************************/ -#define MPI_CONFIG_PAGEATTR_READ_ONLY (0x00) -#define MPI_CONFIG_PAGEATTR_CHANGEABLE (0x10) -#define MPI_CONFIG_PAGEATTR_PERSISTENT (0x20) -#define MPI_CONFIG_PAGEATTR_RO_PERSISTENT (0x30) -#define MPI_CONFIG_PAGEATTR_MASK (0xF0) - -#define MPI_CONFIG_PAGETYPE_IO_UNIT (0x00) -#define MPI_CONFIG_PAGETYPE_IOC (0x01) -#define MPI_CONFIG_PAGETYPE_BIOS (0x02) -#define MPI_CONFIG_PAGETYPE_SCSI_PORT (0x03) -#define MPI_CONFIG_PAGETYPE_SCSI_DEVICE (0x04) -#define MPI_CONFIG_PAGETYPE_FC_PORT (0x05) -#define MPI_CONFIG_PAGETYPE_FC_DEVICE (0x06) -#define MPI_CONFIG_PAGETYPE_LAN (0x07) -#define MPI_CONFIG_PAGETYPE_RAID_VOLUME (0x08) -#define MPI_CONFIG_PAGETYPE_MANUFACTURING (0x09) -#define MPI_CONFIG_PAGETYPE_RAID_PHYSDISK (0x0A) -#define MPI_CONFIG_PAGETYPE_MASK (0x0F) - -#define MPI_CONFIG_TYPENUM_MASK (0x0FFF) - - -/**************************************************************************** -* PageAddress field values -****************************************************************************/ -#define MPI_SCSI_PORT_PGAD_PORT_MASK (0x000000FF) - -#define MPI_SCSI_DEVICE_TARGET_ID_MASK (0x000000FF) -#define MPI_SCSI_DEVICE_TARGET_ID_SHIFT (0) -#define MPI_SCSI_DEVICE_BUS_MASK (0x0000FF00) -#define MPI_SCSI_DEVICE_BUS_SHIFT (8) - -#define MPI_FC_PORT_PGAD_PORT_MASK (0xF0000000) -#define MPI_FC_PORT_PGAD_PORT_SHIFT (28) -#define MPI_FC_PORT_PGAD_FORM_MASK (0x0F000000) -#define MPI_FC_PORT_PGAD_FORM_INDEX (0x01000000) -#define MPI_FC_PORT_PGAD_INDEX_MASK (0x0000FFFF) -#define MPI_FC_PORT_PGAD_INDEX_SHIFT (0) - -#define MPI_FC_DEVICE_PGAD_PORT_MASK (0xF0000000) -#define MPI_FC_DEVICE_PGAD_PORT_SHIFT (28) -#define MPI_FC_DEVICE_PGAD_FORM_MASK (0x0F000000) -#define MPI_FC_DEVICE_PGAD_FORM_NEXT_DID (0x00000000) -#define MPI_FC_DEVICE_PGAD_ND_PORT_MASK (0xF0000000) -#define MPI_FC_DEVICE_PGAD_ND_PORT_SHIFT (28) -#define MPI_FC_DEVICE_PGAD_ND_DID_MASK (0x00FFFFFF) -#define MPI_FC_DEVICE_PGAD_ND_DID_SHIFT (0) -#define MPI_FC_DEVICE_PGAD_FORM_BUS_TID (0x01000000) -#define MPI_FC_DEVICE_PGAD_BT_BUS_MASK (0x0000FF00) -#define MPI_FC_DEVICE_PGAD_BT_BUS_SHIFT (8) -#define MPI_FC_DEVICE_PGAD_BT_TID_MASK (0x000000FF) -#define MPI_FC_DEVICE_PGAD_BT_TID_SHIFT (0) - -#define MPI_PHYSDISK_PGAD_PHYSDISKNUM_MASK (0x000000FF) -#define MPI_PHYSDISK_PGAD_PHYSDISKNUM_SHIFT (0) - - - -/**************************************************************************** -* Config Request Message -****************************************************************************/ -typedef struct _MSG_CONFIG -{ - U8 Action; /* 00h */ - U8 Reserved; /* 01h */ - U8 ChainOffset; /* 02h */ - U8 Function; /* 03h */ - U8 Reserved1[3]; /* 04h */ - U8 MsgFlags; /* 07h */ - U32 MsgContext; /* 08h */ - U8 Reserved2[8]; /* 0Ch */ - CONFIG_PAGE_HEADER Header; /* 14h */ - U32 PageAddress; /* 18h */ - SGE_IO_UNION PageBufferSGE; /* 1Ch */ -} MSG_CONFIG, MPI_POINTER PTR_MSG_CONFIG, - Config_t, MPI_POINTER pConfig_t; - - -/**************************************************************************** -* Action field values -****************************************************************************/ -#define MPI_CONFIG_ACTION_PAGE_HEADER (0x00) -#define MPI_CONFIG_ACTION_PAGE_READ_CURRENT (0x01) -#define MPI_CONFIG_ACTION_PAGE_WRITE_CURRENT (0x02) -#define MPI_CONFIG_ACTION_PAGE_DEFAULT (0x03) -#define MPI_CONFIG_ACTION_PAGE_WRITE_NVRAM (0x04) -#define MPI_CONFIG_ACTION_PAGE_READ_DEFAULT (0x05) -#define MPI_CONFIG_ACTION_PAGE_READ_NVRAM (0x06) - - -/* Config Reply Message */ -typedef struct _MSG_CONFIG_REPLY -{ - U8 Action; /* 00h */ - U8 Reserved; /* 01h */ - U8 MsgLength; /* 02h */ - U8 Function; /* 03h */ - U8 Reserved1[3]; /* 04h */ - U8 MsgFlags; /* 07h */ - U32 MsgContext; /* 08h */ - U8 Reserved2[2]; /* 0Ch */ - U16 IOCStatus; /* 0Eh */ - U32 IOCLogInfo; /* 10h */ - CONFIG_PAGE_HEADER Header; /* 14h */ -} MSG_CONFIG_REPLY, MPI_POINTER PTR_MSG_CONFIG_REPLY, - ConfigReply_t, MPI_POINTER pConfigReply_t; - - - -/***************************************************************************** -* -* C o n f i g u r a t i o n P a g e s -* -*****************************************************************************/ - -/**************************************************************************** -* Manufacturing Config pages -****************************************************************************/ -#define MPI_MANUFACTPAGE_VENDORID_LSILOGIC (0x1000) -#define MPI_MANUFACTPAGE_VENDORID_TREBIA (0x1783) - -#define MPI_MANUFACTPAGE_DEVICEID_FC909 (0x0621) -#define MPI_MANUFACTPAGE_DEVICEID_FC919 (0x0624) -#define MPI_MANUFACTPAGE_DEVICEID_FC929 (0x0622) -#define MPI_MANUFACTPAGE_DEVICEID_FC919X (0x0628) -#define MPI_MANUFACTPAGE_DEVICEID_FC929X (0x0626) - -#define MPI_MANUFACTPAGE_DEVID_53C1030 (0x0030) -#define MPI_MANUFACTPAGE_DEVID_53C1030ZC (0x0031) -#define MPI_MANUFACTPAGE_DEVID_1030_53C1035 (0x0032) -#define MPI_MANUFACTPAGE_DEVID_1030ZC_53C1035 (0x0033) -#define MPI_MANUFACTPAGE_DEVID_53C1035 (0x0040) -#define MPI_MANUFACTPAGE_DEVID_53C1035ZC (0x0041) - -#define MPI_MANUFACTPAGE_DEVID_SA2010 (0x0804) -#define MPI_MANUFACTPAGE_DEVID_SA2010ZC (0x0805) -#define MPI_MANUFACTPAGE_DEVID_SA2020 (0x0806) -#define MPI_MANUFACTPAGE_DEVID_SA2020ZC (0x0807) - -#define MPI_MANUFACTPAGE_DEVID_SNP1000 (0x0010) -#define MPI_MANUFACTPAGE_DEVID_SNP500 (0x0020) - - - -typedef struct _CONFIG_PAGE_MANUFACTURING_0 -{ - CONFIG_PAGE_HEADER Header; /* 00h */ - U8 ChipName[16]; /* 04h */ - U8 ChipRevision[8]; /* 14h */ - U8 BoardName[16]; /* 1Ch */ - U8 BoardAssembly[16]; /* 2Ch */ - U8 BoardTracerNumber[16]; /* 3Ch */ - -} CONFIG_PAGE_MANUFACTURING_0, MPI_POINTER PTR_CONFIG_PAGE_MANUFACTURING_0, - ManufacturingPage0_t, MPI_POINTER pManufacturingPage0_t; - -#define MPI_MANUFACTURING0_PAGEVERSION (0x00) - - -typedef struct _CONFIG_PAGE_MANUFACTURING_1 -{ - CONFIG_PAGE_HEADER Header; /* 00h */ - U8 VPD[256]; /* 04h */ -} CONFIG_PAGE_MANUFACTURING_1, MPI_POINTER PTR_CONFIG_PAGE_MANUFACTURING_1, - ManufacturingPage1_t, MPI_POINTER pManufacturingPage1_t; - -#define MPI_MANUFACTURING1_PAGEVERSION (0x00) - - -typedef struct _MPI_CHIP_REVISION_ID -{ - U16 DeviceID; /* 00h */ - U8 PCIRevisionID; /* 02h */ - U8 Reserved; /* 03h */ -} MPI_CHIP_REVISION_ID, MPI_POINTER PTR_MPI_CHIP_REVISION_ID, - MpiChipRevisionId_t, MPI_POINTER pMpiChipRevisionId_t; - - -/* - * Host code (drivers, BIOS, utilities, etc.) should leave this define set to - * one and check Header.PageLength at runtime. - */ -#ifndef MPI_MAN_PAGE_2_HW_SETTINGS_WORDS -#define MPI_MAN_PAGE_2_HW_SETTINGS_WORDS (1) -#endif - -typedef struct _CONFIG_PAGE_MANUFACTURING_2 -{ - CONFIG_PAGE_HEADER Header; /* 00h */ - MPI_CHIP_REVISION_ID ChipId; /* 04h */ - U32 HwSettings[MPI_MAN_PAGE_2_HW_SETTINGS_WORDS];/* 08h */ -} CONFIG_PAGE_MANUFACTURING_2, MPI_POINTER PTR_CONFIG_PAGE_MANUFACTURING_2, - ManufacturingPage2_t, MPI_POINTER pManufacturingPage2_t; - -#define MPI_MANUFACTURING2_PAGEVERSION (0x00) - - -/* - * Host code (drivers, BIOS, utilities, etc.) should leave this define set to - * one and check Header.PageLength at runtime. - */ -#ifndef MPI_MAN_PAGE_3_INFO_WORDS -#define MPI_MAN_PAGE_3_INFO_WORDS (1) -#endif - -typedef struct _CONFIG_PAGE_MANUFACTURING_3 -{ - CONFIG_PAGE_HEADER Header; /* 00h */ - MPI_CHIP_REVISION_ID ChipId; /* 04h */ - U32 Info[MPI_MAN_PAGE_3_INFO_WORDS];/* 08h */ -} CONFIG_PAGE_MANUFACTURING_3, MPI_POINTER PTR_CONFIG_PAGE_MANUFACTURING_3, - ManufacturingPage3_t, MPI_POINTER pManufacturingPage3_t; - -#define MPI_MANUFACTURING3_PAGEVERSION (0x00) - - -typedef struct _CONFIG_PAGE_MANUFACTURING_4 -{ - CONFIG_PAGE_HEADER Header; /* 00h */ - U32 Reserved1; /* 04h */ - U8 InfoOffset0; /* 08h */ - U8 InfoSize0; /* 09h */ - U8 InfoOffset1; /* 0Ah */ - U8 InfoSize1; /* 0Bh */ - U8 InquirySize; /* 0Ch */ - U8 Reserved2; /* 0Dh */ - U16 Reserved3; /* 0Eh */ - U8 InquiryData[56]; /* 10h */ - U32 ISVolumeSettings; /* 48h */ - U32 IMEVolumeSettings; /* 4Ch */ - U32 IMVolumeSettings; /* 50h */ -} CONFIG_PAGE_MANUFACTURING_4, MPI_POINTER PTR_CONFIG_PAGE_MANUFACTURING_4, - ManufacturingPage4_t, MPI_POINTER pManufacturingPage4_t; - -#define MPI_MANUFACTURING4_PAGEVERSION (0x00) - - -/**************************************************************************** -* IO Unit Config Pages -****************************************************************************/ - -typedef struct _CONFIG_PAGE_IO_UNIT_0 -{ - CONFIG_PAGE_HEADER Header; /* 00h */ - U64 UniqueValue; /* 04h */ -} CONFIG_PAGE_IO_UNIT_0, MPI_POINTER PTR_CONFIG_PAGE_IO_UNIT_0, - IOUnitPage0_t, MPI_POINTER pIOUnitPage0_t; - -#define MPI_IOUNITPAGE0_PAGEVERSION (0x00) - - -typedef struct _CONFIG_PAGE_IO_UNIT_1 -{ - CONFIG_PAGE_HEADER Header; /* 00h */ - U32 Flags; /* 04h */ -} CONFIG_PAGE_IO_UNIT_1, MPI_POINTER PTR_CONFIG_PAGE_IO_UNIT_1, - IOUnitPage1_t, MPI_POINTER pIOUnitPage1_t; - -#define MPI_IOUNITPAGE1_PAGEVERSION (0x00) - -/* IO Unit Page 1 Flags defines */ - -#define MPI_IOUNITPAGE1_MULTI_FUNCTION (0x00000000) -#define MPI_IOUNITPAGE1_SINGLE_FUNCTION (0x00000001) -#define MPI_IOUNITPAGE1_MULTI_PATHING (0x00000002) -#define MPI_IOUNITPAGE1_SINGLE_PATHING (0x00000000) -#define MPI_IOUNITPAGE1_IR_USE_STATIC_VOLUME_ID (0x00000004) -#define MPI_IOUNITPAGE1_DISABLE_IR (0x00000040) -#define MPI_IOUNITPAGE1_FORCE_32 (0x00000080) - - -typedef struct _MPI_ADAPTER_INFO -{ - U8 PciBusNumber; /* 00h */ - U8 PciDeviceAndFunctionNumber; /* 01h */ - U16 AdapterFlags; /* 02h */ -} MPI_ADAPTER_INFO, MPI_POINTER PTR_MPI_ADAPTER_INFO, - MpiAdapterInfo_t, MPI_POINTER pMpiAdapterInfo_t; - -#define MPI_ADAPTER_INFO_FLAGS_EMBEDDED (0x0001) -#define MPI_ADAPTER_INFO_FLAGS_INIT_STATUS (0x0002) - -typedef struct _CONFIG_PAGE_IO_UNIT_2 -{ - CONFIG_PAGE_HEADER Header; /* 00h */ - U32 Flags; /* 04h */ - U32 BiosVersion; /* 08h */ - MPI_ADAPTER_INFO AdapterOrder[4]; /* 0Ch */ -} CONFIG_PAGE_IO_UNIT_2, MPI_POINTER PTR_CONFIG_PAGE_IO_UNIT_2, - IOUnitPage2_t, MPI_POINTER pIOUnitPage2_t; - -#define MPI_IOUNITPAGE2_PAGEVERSION (0x00) - -#define MPI_IOUNITPAGE2_FLAGS_PAUSE_ON_ERROR (0x00000002) -#define MPI_IOUNITPAGE2_FLAGS_VERBOSE_ENABLE (0x00000004) -#define MPI_IOUNITPAGE2_FLAGS_COLOR_VIDEO_DISABLE (0x00000008) -#define MPI_IOUNITPAGE2_FLAGS_DONT_HOOK_INT_40 (0x00000010) - - -/* - * Host code (drivers, BIOS, utilities, etc.) should leave this define set to - * one and check Header.PageLength at runtime. - */ -#ifndef MPI_IO_UNIT_PAGE_3_GPIO_VAL_MAX -#define MPI_IO_UNIT_PAGE_3_GPIO_VAL_MAX (1) -#endif - -typedef struct _CONFIG_PAGE_IO_UNIT_3 -{ - CONFIG_PAGE_HEADER Header; /* 00h */ - U8 GPIOCount; /* 04h */ - U8 Reserved1; /* 05h */ - U16 Reserved2; /* 06h */ - U16 GPIOVal[MPI_IO_UNIT_PAGE_3_GPIO_VAL_MAX]; /* 08h */ -} CONFIG_PAGE_IO_UNIT_3, MPI_POINTER PTR_CONFIG_PAGE_IO_UNIT_3, - IOUnitPage3_t, MPI_POINTER pIOUnitPage3_t; - -#define MPI_IOUNITPAGE3_PAGEVERSION (0x01) - -#define MPI_IOUNITPAGE3_GPIO_FUNCTION_MASK (0xFC) -#define MPI_IOUNITPAGE3_GPIO_FUNCTION_SHIFT (2) -#define MPI_IOUNITPAGE3_GPIO_SETTING_OFF (0x00) -#define MPI_IOUNITPAGE3_GPIO_SETTING_ON (0x01) - - -/**************************************************************************** -* IOC Config Pages -****************************************************************************/ - -typedef struct _CONFIG_PAGE_IOC_0 -{ - CONFIG_PAGE_HEADER Header; /* 00h */ - U32 TotalNVStore; /* 04h */ - U32 FreeNVStore; /* 08h */ - U16 VendorID; /* 0Ch */ - U16 DeviceID; /* 0Eh */ - U8 RevisionID; /* 10h */ - U8 Reserved[3]; /* 11h */ - U32 ClassCode; /* 14h */ - U16 SubsystemVendorID; /* 18h */ - U16 SubsystemID; /* 1Ah */ -} CONFIG_PAGE_IOC_0, MPI_POINTER PTR_CONFIG_PAGE_IOC_0, - IOCPage0_t, MPI_POINTER pIOCPage0_t; - -#define MPI_IOCPAGE0_PAGEVERSION (0x01) - - -typedef struct _CONFIG_PAGE_IOC_1 -{ - CONFIG_PAGE_HEADER Header; /* 00h */ - U32 Flags; /* 04h */ - U32 CoalescingTimeout; /* 08h */ - U8 CoalescingDepth; /* 0Ch */ - U8 PCISlotNum; /* 0Dh */ - U8 Reserved[2]; /* 0Eh */ -} CONFIG_PAGE_IOC_1, MPI_POINTER PTR_CONFIG_PAGE_IOC_1, - IOCPage1_t, MPI_POINTER pIOCPage1_t; - -#define MPI_IOCPAGE1_PAGEVERSION (0x01) - -#define MPI_IOCPAGE1_REPLY_COALESCING (0x00000001) - -#define MPI_IOCPAGE1_PCISLOTNUM_UNKNOWN (0xFF) - - -typedef struct _CONFIG_PAGE_IOC_2_RAID_VOL -{ - U8 VolumeID; /* 00h */ - U8 VolumeBus; /* 01h */ - U8 VolumeIOC; /* 02h */ - U8 VolumePageNumber; /* 03h */ - U8 VolumeType; /* 04h */ - U8 Flags; /* 05h */ - U16 Reserved3; /* 06h */ -} CONFIG_PAGE_IOC_2_RAID_VOL, MPI_POINTER PTR_CONFIG_PAGE_IOC_2_RAID_VOL, - ConfigPageIoc2RaidVol_t, MPI_POINTER pConfigPageIoc2RaidVol_t; - -/* IOC Page 2 Volume RAID Type values, also used in RAID Volume pages */ - -#define MPI_RAID_VOL_TYPE_IS (0x00) -#define MPI_RAID_VOL_TYPE_IME (0x01) -#define MPI_RAID_VOL_TYPE_IM (0x02) - -/* IOC Page 2 Volume Flags values */ - -#define MPI_IOCPAGE2_FLAG_VOLUME_INACTIVE (0x08) - -/* - * Host code (drivers, BIOS, utilities, etc.) should leave this define set to - * one and check Header.PageLength at runtime. - */ -#ifndef MPI_IOC_PAGE_2_RAID_VOLUME_MAX -#define MPI_IOC_PAGE_2_RAID_VOLUME_MAX (1) -#endif - -typedef struct _CONFIG_PAGE_IOC_2 -{ - CONFIG_PAGE_HEADER Header; /* 00h */ - U32 CapabilitiesFlags; /* 04h */ - U8 NumActiveVolumes; /* 08h */ - U8 MaxVolumes; /* 09h */ - U8 NumActivePhysDisks; /* 0Ah */ - U8 MaxPhysDisks; /* 0Bh */ - CONFIG_PAGE_IOC_2_RAID_VOL RaidVolume[MPI_IOC_PAGE_2_RAID_VOLUME_MAX];/* 0Ch */ -} CONFIG_PAGE_IOC_2, MPI_POINTER PTR_CONFIG_PAGE_IOC_2, - IOCPage2_t, MPI_POINTER pIOCPage2_t; - -#define MPI_IOCPAGE2_PAGEVERSION (0x02) - -/* IOC Page 2 Capabilities flags */ - -#define MPI_IOCPAGE2_CAP_FLAGS_IS_SUPPORT (0x00000001) -#define MPI_IOCPAGE2_CAP_FLAGS_IME_SUPPORT (0x00000002) -#define MPI_IOCPAGE2_CAP_FLAGS_IM_SUPPORT (0x00000004) -#define MPI_IOCPAGE2_CAP_FLAGS_SES_SUPPORT (0x20000000) -#define MPI_IOCPAGE2_CAP_FLAGS_SAFTE_SUPPORT (0x40000000) -#define MPI_IOCPAGE2_CAP_FLAGS_CROSS_CHANNEL_SUPPORT (0x80000000) - - -typedef struct _IOC_3_PHYS_DISK -{ - U8 PhysDiskID; /* 00h */ - U8 PhysDiskBus; /* 01h */ - U8 PhysDiskIOC; /* 02h */ - U8 PhysDiskNum; /* 03h */ -} IOC_3_PHYS_DISK, MPI_POINTER PTR_IOC_3_PHYS_DISK, - Ioc3PhysDisk_t, MPI_POINTER pIoc3PhysDisk_t; - -/* - * Host code (drivers, BIOS, utilities, etc.) should leave this define set to - * one and check Header.PageLength at runtime. - */ -#ifndef MPI_IOC_PAGE_3_PHYSDISK_MAX -#define MPI_IOC_PAGE_3_PHYSDISK_MAX (1) -#endif - -typedef struct _CONFIG_PAGE_IOC_3 -{ - CONFIG_PAGE_HEADER Header; /* 00h */ - U8 NumPhysDisks; /* 04h */ - U8 Reserved1; /* 05h */ - U16 Reserved2; /* 06h */ - IOC_3_PHYS_DISK PhysDisk[MPI_IOC_PAGE_3_PHYSDISK_MAX]; /* 08h */ -} CONFIG_PAGE_IOC_3, MPI_POINTER PTR_CONFIG_PAGE_IOC_3, - IOCPage3_t, MPI_POINTER pIOCPage3_t; - -#define MPI_IOCPAGE3_PAGEVERSION (0x00) - - -typedef struct _IOC_4_SEP -{ - U8 SEPTargetID; /* 00h */ - U8 SEPBus; /* 01h */ - U16 Reserved; /* 02h */ -} IOC_4_SEP, MPI_POINTER PTR_IOC_4_SEP, - Ioc4Sep_t, MPI_POINTER pIoc4Sep_t; - -/* - * Host code (drivers, BIOS, utilities, etc.) should leave this define set to - * one and check Header.PageLength at runtime. - */ -#ifndef MPI_IOC_PAGE_4_SEP_MAX -#define MPI_IOC_PAGE_4_SEP_MAX (1) -#endif - -typedef struct _CONFIG_PAGE_IOC_4 -{ - CONFIG_PAGE_HEADER Header; /* 00h */ - U8 ActiveSEP; /* 04h */ - U8 MaxSEP; /* 05h */ - U16 Reserved1; /* 06h */ - IOC_4_SEP SEP[MPI_IOC_PAGE_4_SEP_MAX]; /* 08h */ -} CONFIG_PAGE_IOC_4, MPI_POINTER PTR_CONFIG_PAGE_IOC_4, - IOCPage4_t, MPI_POINTER pIOCPage4_t; - -#define MPI_IOCPAGE4_PAGEVERSION (0x00) - - -typedef struct _IOC_5_HOT_SPARE -{ - U8 PhysDiskNum; /* 00h */ - U8 Reserved; /* 01h */ - U8 HotSparePool; /* 02h */ - U8 Flags; /* 03h */ -} IOC_5_HOT_SPARE, MPI_POINTER PTR_IOC_5_HOT_SPARE, - Ioc5HotSpare_t, MPI_POINTER pIoc5HotSpare_t; - -/* IOC Page 5 HotSpare Flags */ -#define MPI_IOC_PAGE_5_HOT_SPARE_ACTIVE (0x01) - -/* - * Host code (drivers, BIOS, utilities, etc.) should leave this define set to - * one and check Header.PageLength at runtime. - */ -#ifndef MPI_IOC_PAGE_5_HOT_SPARE_MAX -#define MPI_IOC_PAGE_5_HOT_SPARE_MAX (1) -#endif - -typedef struct _CONFIG_PAGE_IOC_5 -{ - CONFIG_PAGE_HEADER Header; /* 00h */ - U32 Reserved1; /* 04h */ - U8 NumHotSpares; /* 08h */ - U8 Reserved2; /* 09h */ - U16 Reserved3; /* 0Ah */ - IOC_5_HOT_SPARE HotSpare[MPI_IOC_PAGE_5_HOT_SPARE_MAX]; /* 0Ch */ -} CONFIG_PAGE_IOC_5, MPI_POINTER PTR_CONFIG_PAGE_IOC_5, - IOCPage5_t, MPI_POINTER pIOCPage5_t; - -#define MPI_IOCPAGE5_PAGEVERSION (0x00) - - - -/**************************************************************************** -* SCSI Port Config Pages -****************************************************************************/ - -typedef struct _CONFIG_PAGE_SCSI_PORT_0 -{ - CONFIG_PAGE_HEADER Header; /* 00h */ - U32 Capabilities; /* 04h */ - U32 PhysicalInterface; /* 08h */ -} CONFIG_PAGE_SCSI_PORT_0, MPI_POINTER PTR_CONFIG_PAGE_SCSI_PORT_0, - SCSIPortPage0_t, MPI_POINTER pSCSIPortPage0_t; - -#define MPI_SCSIPORTPAGE0_PAGEVERSION (0x01) - -#define MPI_SCSIPORTPAGE0_CAP_IU (0x00000001) -#define MPI_SCSIPORTPAGE0_CAP_DT (0x00000002) -#define MPI_SCSIPORTPAGE0_CAP_QAS (0x00000004) -#define MPI_SCSIPORTPAGE0_CAP_MIN_SYNC_PERIOD_MASK (0x0000FF00) -#define MPI_SCSIPORTPAGE0_CAP_MAX_SYNC_OFFSET_MASK (0x00FF0000) -#define MPI_SCSIPORTPAGE0_CAP_WIDE (0x20000000) -#define MPI_SCSIPORTPAGE0_CAP_AIP (0x80000000) - -#define MPI_SCSIPORTPAGE0_PHY_SIGNAL_TYPE_MASK (0x00000003) -#define MPI_SCSIPORTPAGE0_PHY_SIGNAL_HVD (0x01) -#define MPI_SCSIPORTPAGE0_PHY_SIGNAL_SE (0x02) -#define MPI_SCSIPORTPAGE0_PHY_SIGNAL_LVD (0x03) -#define MPI_SCSIPORTPAGE0_PHY_MASK_CONNECTED_ID (0xFF000000) -#define MPI_SCSIPORTPAGE0_PHY_SHIFT_CONNECTED_ID (24) -#define MPI_SCSIPORTPAGE0_PHY_BUS_FREE_CONNECTED_ID (0xFE) -#define MPI_SCSIPORTPAGE0_PHY_UNKNOWN_CONNECTED_ID (0xFF) - - -typedef struct _CONFIG_PAGE_SCSI_PORT_1 -{ - CONFIG_PAGE_HEADER Header; /* 00h */ - U32 Configuration; /* 04h */ - U32 OnBusTimerValue; /* 08h */ - U8 TargetConfig; /* 0Ch */ - U8 Reserved1; /* 0Dh */ - U16 IDConfig; /* 0Eh */ -} CONFIG_PAGE_SCSI_PORT_1, MPI_POINTER PTR_CONFIG_PAGE_SCSI_PORT_1, - SCSIPortPage1_t, MPI_POINTER pSCSIPortPage1_t; - -#define MPI_SCSIPORTPAGE1_PAGEVERSION (0x03) - -/* Configuration values */ -#define MPI_SCSIPORTPAGE1_CFG_PORT_SCSI_ID_MASK (0x000000FF) -#define MPI_SCSIPORTPAGE1_CFG_PORT_RESPONSE_ID_MASK (0xFFFF0000) - -/* TargetConfig values */ -#define MPI_SCSIPORTPAGE1_TARGCONFIG_TARG_ONLY (0x01) -#define MPI_SCSIPORTPAGE1_TARGCONFIG_INIT_TARG (0x02) - - -typedef struct _MPI_DEVICE_INFO -{ - U8 Timeout; /* 00h */ - U8 SyncFactor; /* 01h */ - U16 DeviceFlags; /* 02h */ -} MPI_DEVICE_INFO, MPI_POINTER PTR_MPI_DEVICE_INFO, - MpiDeviceInfo_t, MPI_POINTER pMpiDeviceInfo_t; - -typedef struct _CONFIG_PAGE_SCSI_PORT_2 -{ - CONFIG_PAGE_HEADER Header; /* 00h */ - U32 PortFlags; /* 04h */ - U32 PortSettings; /* 08h */ - MPI_DEVICE_INFO DeviceSettings[16]; /* 0Ch */ -} CONFIG_PAGE_SCSI_PORT_2, MPI_POINTER PTR_CONFIG_PAGE_SCSI_PORT_2, - SCSIPortPage2_t, MPI_POINTER pSCSIPortPage2_t; - -#define MPI_SCSIPORTPAGE2_PAGEVERSION (0x02) - -/* PortFlags values */ -#define MPI_SCSIPORTPAGE2_PORT_FLAGS_SCAN_HIGH_TO_LOW (0x00000001) -#define MPI_SCSIPORTPAGE2_PORT_FLAGS_AVOID_SCSI_RESET (0x00000004) -#define MPI_SCSIPORTPAGE2_PORT_FLAGS_ALTERNATE_CHS (0x00000008) -#define MPI_SCSIPORTPAGE2_PORT_FLAGS_TERMINATION_DISABLE (0x00000010) - -#define MPI_SCSIPORTPAGE2_PORT_FLAGS_DV_MASK (0x00000060) -#define MPI_SCSIPORTPAGE2_PORT_FLAGS_FULL_DV (0x00000000) -#define MPI_SCSIPORTPAGE2_PORT_FLAGS_BASIC_DV_ONLY (0x00000020) -#define MPI_SCSIPORTPAGE2_PORT_FLAGS_OFF_DV (0x00000060) - -/* PortSettings values */ -#define MPI_SCSIPORTPAGE2_PORT_HOST_ID_MASK (0x0000000F) -#define MPI_SCSIPORTPAGE2_PORT_MASK_INIT_HBA (0x00000030) -#define MPI_SCSIPORTPAGE2_PORT_DISABLE_INIT_HBA (0x00000000) -#define MPI_SCSIPORTPAGE2_PORT_BIOS_INIT_HBA (0x00000010) -#define MPI_SCSIPORTPAGE2_PORT_OS_INIT_HBA (0x00000020) -#define MPI_SCSIPORTPAGE2_PORT_BIOS_OS_INIT_HBA (0x00000030) -#define MPI_SCSIPORTPAGE2_PORT_REMOVABLE_MEDIA (0x000000C0) -#define MPI_SCSIPORTPAGE2_PORT_SPINUP_DELAY_MASK (0x00000F00) -#define MPI_SCSIPORTPAGE2_PORT_MASK_NEGO_MASTER_SETTINGS (0x00003000) -#define MPI_SCSIPORTPAGE2_PORT_NEGO_MASTER_SETTINGS (0x00000000) -#define MPI_SCSIPORTPAGE2_PORT_NONE_MASTER_SETTINGS (0x00001000) -#define MPI_SCSIPORTPAGE2_PORT_ALL_MASTER_SETTINGS (0x00003000) - -#define MPI_SCSIPORTPAGE2_DEVICE_DISCONNECT_ENABLE (0x0001) -#define MPI_SCSIPORTPAGE2_DEVICE_ID_SCAN_ENABLE (0x0002) -#define MPI_SCSIPORTPAGE2_DEVICE_LUN_SCAN_ENABLE (0x0004) -#define MPI_SCSIPORTPAGE2_DEVICE_TAG_QUEUE_ENABLE (0x0008) -#define MPI_SCSIPORTPAGE2_DEVICE_WIDE_DISABLE (0x0010) -#define MPI_SCSIPORTPAGE2_DEVICE_BOOT_CHOICE (0x0020) - - -/**************************************************************************** -* SCSI Target Device Config Pages -****************************************************************************/ - -typedef struct _CONFIG_PAGE_SCSI_DEVICE_0 -{ - CONFIG_PAGE_HEADER Header; /* 00h */ - U32 NegotiatedParameters; /* 04h */ - U32 Information; /* 08h */ -} CONFIG_PAGE_SCSI_DEVICE_0, MPI_POINTER PTR_CONFIG_PAGE_SCSI_DEVICE_0, - SCSIDevicePage0_t, MPI_POINTER pSCSIDevicePage0_t; - -#define MPI_SCSIDEVPAGE0_PAGEVERSION (0x03) - -#define MPI_SCSIDEVPAGE0_NP_IU (0x00000001) -#define MPI_SCSIDEVPAGE0_NP_DT (0x00000002) -#define MPI_SCSIDEVPAGE0_NP_QAS (0x00000004) -#define MPI_SCSIDEVPAGE0_NP_HOLD_MCS (0x00000008) -#define MPI_SCSIDEVPAGE0_NP_WR_FLOW (0x00000010) -#define MPI_SCSIDEVPAGE0_NP_RD_STRM (0x00000020) -#define MPI_SCSIDEVPAGE0_NP_RTI (0x00000040) -#define MPI_SCSIDEVPAGE0_NP_PCOMP_EN (0x00000080) -#define MPI_SCSIDEVPAGE0_NP_NEG_SYNC_PERIOD_MASK (0x0000FF00) -#define MPI_SCSIDEVPAGE0_NP_NEG_SYNC_OFFSET_MASK (0x00FF0000) -#define MPI_SCSIDEVPAGE0_NP_WIDE (0x20000000) -#define MPI_SCSIDEVPAGE0_NP_AIP (0x80000000) - -#define MPI_SCSIDEVPAGE0_INFO_PARAMS_NEGOTIATED (0x00000001) -#define MPI_SCSIDEVPAGE0_INFO_SDTR_REJECTED (0x00000002) -#define MPI_SCSIDEVPAGE0_INFO_WDTR_REJECTED (0x00000004) -#define MPI_SCSIDEVPAGE0_INFO_PPR_REJECTED (0x00000008) - - -typedef struct _CONFIG_PAGE_SCSI_DEVICE_1 -{ - CONFIG_PAGE_HEADER Header; /* 00h */ - U32 RequestedParameters; /* 04h */ - U32 Reserved; /* 08h */ - U32 Configuration; /* 0Ch */ -} CONFIG_PAGE_SCSI_DEVICE_1, MPI_POINTER PTR_CONFIG_PAGE_SCSI_DEVICE_1, - SCSIDevicePage1_t, MPI_POINTER pSCSIDevicePage1_t; - -#define MPI_SCSIDEVPAGE1_PAGEVERSION (0x04) - -#define MPI_SCSIDEVPAGE1_RP_IU (0x00000001) -#define MPI_SCSIDEVPAGE1_RP_DT (0x00000002) -#define MPI_SCSIDEVPAGE1_RP_QAS (0x00000004) -#define MPI_SCSIDEVPAGE1_RP_HOLD_MCS (0x00000008) -#define MPI_SCSIDEVPAGE1_RP_WR_FLOW (0x00000010) -#define MPI_SCSIDEVPAGE1_RP_RD_STRM (0x00000020) -#define MPI_SCSIDEVPAGE1_RP_RTI (0x00000040) -#define MPI_SCSIDEVPAGE1_RP_PCOMP_EN (0x00000080) -#define MPI_SCSIDEVPAGE1_RP_MIN_SYNC_PERIOD_MASK (0x0000FF00) -#define MPI_SCSIDEVPAGE1_RP_MAX_SYNC_OFFSET_MASK (0x00FF0000) -#define MPI_SCSIDEVPAGE1_RP_WIDE (0x20000000) -#define MPI_SCSIDEVPAGE1_RP_AIP (0x80000000) - -#define MPI_SCSIDEVPAGE1_CONF_WDTR_DISALLOWED (0x00000002) -#define MPI_SCSIDEVPAGE1_CONF_SDTR_DISALLOWED (0x00000004) -#define MPI_SCSIDEVPAGE1_CONF_EXTENDED_PARAMS_ENABLE (0x00000008) -#define MPI_SCSIDEVPAGE1_CONF_FORCE_PPR_MSG (0x00000010) - - -typedef struct _CONFIG_PAGE_SCSI_DEVICE_2 -{ - CONFIG_PAGE_HEADER Header; /* 00h */ - U32 DomainValidation; /* 04h */ - U32 ParityPipeSelect; /* 08h */ - U32 DataPipeSelect; /* 0Ch */ -} CONFIG_PAGE_SCSI_DEVICE_2, MPI_POINTER PTR_CONFIG_PAGE_SCSI_DEVICE_2, - SCSIDevicePage2_t, MPI_POINTER pSCSIDevicePage2_t; - -#define MPI_SCSIDEVPAGE2_PAGEVERSION (0x01) - -#define MPI_SCSIDEVPAGE2_DV_ISI_ENABLE (0x00000010) -#define MPI_SCSIDEVPAGE2_DV_SECONDARY_DRIVER_ENABLE (0x00000020) -#define MPI_SCSIDEVPAGE2_DV_SLEW_RATE_CTRL (0x00000380) -#define MPI_SCSIDEVPAGE2_DV_PRIM_DRIVE_STR_CTRL (0x00001C00) -#define MPI_SCSIDEVPAGE2_DV_SECOND_DRIVE_STR_CTRL (0x0000E000) -#define MPI_SCSIDEVPAGE2_DV_XCLKH_ST (0x10000000) -#define MPI_SCSIDEVPAGE2_DV_XCLKS_ST (0x20000000) -#define MPI_SCSIDEVPAGE2_DV_XCLKH_DT (0x40000000) -#define MPI_SCSIDEVPAGE2_DV_XCLKS_DT (0x80000000) - -#define MPI_SCSIDEVPAGE2_PPS_PPS_MASK (0x00000003) - -#define MPI_SCSIDEVPAGE2_DPS_BIT_0_PL_SELECT_MASK (0x00000003) -#define MPI_SCSIDEVPAGE2_DPS_BIT_1_PL_SELECT_MASK (0x0000000C) -#define MPI_SCSIDEVPAGE2_DPS_BIT_2_PL_SELECT_MASK (0x00000030) -#define MPI_SCSIDEVPAGE2_DPS_BIT_3_PL_SELECT_MASK (0x000000C0) -#define MPI_SCSIDEVPAGE2_DPS_BIT_4_PL_SELECT_MASK (0x00000300) -#define MPI_SCSIDEVPAGE2_DPS_BIT_5_PL_SELECT_MASK (0x00000C00) -#define MPI_SCSIDEVPAGE2_DPS_BIT_6_PL_SELECT_MASK (0x00003000) -#define MPI_SCSIDEVPAGE2_DPS_BIT_7_PL_SELECT_MASK (0x0000C000) -#define MPI_SCSIDEVPAGE2_DPS_BIT_8_PL_SELECT_MASK (0x00030000) -#define MPI_SCSIDEVPAGE2_DPS_BIT_9_PL_SELECT_MASK (0x000C0000) -#define MPI_SCSIDEVPAGE2_DPS_BIT_10_PL_SELECT_MASK (0x00300000) -#define MPI_SCSIDEVPAGE2_DPS_BIT_11_PL_SELECT_MASK (0x00C00000) -#define MPI_SCSIDEVPAGE2_DPS_BIT_12_PL_SELECT_MASK (0x03000000) -#define MPI_SCSIDEVPAGE2_DPS_BIT_13_PL_SELECT_MASK (0x0C000000) -#define MPI_SCSIDEVPAGE2_DPS_BIT_14_PL_SELECT_MASK (0x30000000) -#define MPI_SCSIDEVPAGE2_DPS_BIT_15_PL_SELECT_MASK (0xC0000000) - - -typedef struct _CONFIG_PAGE_SCSI_DEVICE_3 -{ - CONFIG_PAGE_HEADER Header; /* 00h */ - U16 MsgRejectCount; /* 04h */ - U16 PhaseErrorCount; /* 06h */ - U16 ParityErrorCount; /* 08h */ - U16 Reserved; /* 0Ah */ -} CONFIG_PAGE_SCSI_DEVICE_3, MPI_POINTER PTR_CONFIG_PAGE_SCSI_DEVICE_3, - SCSIDevicePage3_t, MPI_POINTER pSCSIDevicePage3_t; - -#define MPI_SCSIDEVPAGE3_PAGEVERSION (0x00) - -#define MPI_SCSIDEVPAGE3_MAX_COUNTER (0xFFFE) -#define MPI_SCSIDEVPAGE3_UNSUPPORTED_COUNTER (0xFFFF) - - -/**************************************************************************** -* FC Port Config Pages -****************************************************************************/ - -typedef struct _CONFIG_PAGE_FC_PORT_0 -{ - CONFIG_PAGE_HEADER Header; /* 00h */ - U32 Flags; /* 04h */ - U8 MPIPortNumber; /* 08h */ - U8 LinkType; /* 09h */ - U8 PortState; /* 0Ah */ - U8 Reserved; /* 0Bh */ - U32 PortIdentifier; /* 0Ch */ - U64 WWNN; /* 10h */ - U64 WWPN; /* 18h */ - U32 SupportedServiceClass; /* 20h */ - U32 SupportedSpeeds; /* 24h */ - U32 CurrentSpeed; /* 28h */ - U32 MaxFrameSize; /* 2Ch */ - U64 FabricWWNN; /* 30h */ - U64 FabricWWPN; /* 38h */ - U32 DiscoveredPortsCount; /* 40h */ - U32 MaxInitiators; /* 44h */ - U8 MaxAliasesSupported; /* 48h */ - U8 MaxHardAliasesSupported; /* 49h */ - U8 NumCurrentAliases; /* 4Ah */ - U8 Reserved1; /* 4Bh */ -} CONFIG_PAGE_FC_PORT_0, MPI_POINTER PTR_CONFIG_PAGE_FC_PORT_0, - FCPortPage0_t, MPI_POINTER pFCPortPage0_t; - -#define MPI_FCPORTPAGE0_PAGEVERSION (0x02) - -#define MPI_FCPORTPAGE0_FLAGS_PROT_MASK (0x0000000F) -#define MPI_FCPORTPAGE0_FLAGS_PROT_FCP_INIT (MPI_PORTFACTS_PROTOCOL_INITIATOR) -#define MPI_FCPORTPAGE0_FLAGS_PROT_FCP_TARG (MPI_PORTFACTS_PROTOCOL_TARGET) -#define MPI_FCPORTPAGE0_FLAGS_PROT_LAN (MPI_PORTFACTS_PROTOCOL_LAN) -#define MPI_FCPORTPAGE0_FLAGS_PROT_LOGBUSADDR (MPI_PORTFACTS_PROTOCOL_LOGBUSADDR) - -#define MPI_FCPORTPAGE0_FLAGS_ALIAS_ALPA_SUPPORTED (0x00000010) -#define MPI_FCPORTPAGE0_FLAGS_ALIAS_WWN_SUPPORTED (0x00000020) -#define MPI_FCPORTPAGE0_FLAGS_FABRIC_WWN_VALID (0x00000040) - -#define MPI_FCPORTPAGE0_FLAGS_ATTACH_TYPE_MASK (0x00000F00) -#define MPI_FCPORTPAGE0_FLAGS_ATTACH_NO_INIT (0x00000000) -#define MPI_FCPORTPAGE0_FLAGS_ATTACH_POINT_TO_POINT (0x00000100) -#define MPI_FCPORTPAGE0_FLAGS_ATTACH_PRIVATE_LOOP (0x00000200) -#define MPI_FCPORTPAGE0_FLAGS_ATTACH_FABRIC_DIRECT (0x00000400) -#define MPI_FCPORTPAGE0_FLAGS_ATTACH_PUBLIC_LOOP (0x00000800) - -#define MPI_FCPORTPAGE0_LTYPE_RESERVED (0x00) -#define MPI_FCPORTPAGE0_LTYPE_OTHER (0x01) -#define MPI_FCPORTPAGE0_LTYPE_UNKNOWN (0x02) -#define MPI_FCPORTPAGE0_LTYPE_COPPER (0x03) -#define MPI_FCPORTPAGE0_LTYPE_SINGLE_1300 (0x04) -#define MPI_FCPORTPAGE0_LTYPE_SINGLE_1500 (0x05) -#define MPI_FCPORTPAGE0_LTYPE_50_LASER_MULTI (0x06) -#define MPI_FCPORTPAGE0_LTYPE_50_LED_MULTI (0x07) -#define MPI_FCPORTPAGE0_LTYPE_62_LASER_MULTI (0x08) -#define MPI_FCPORTPAGE0_LTYPE_62_LED_MULTI (0x09) -#define MPI_FCPORTPAGE0_LTYPE_MULTI_LONG_WAVE (0x0A) -#define MPI_FCPORTPAGE0_LTYPE_MULTI_SHORT_WAVE (0x0B) -#define MPI_FCPORTPAGE0_LTYPE_LASER_SHORT_WAVE (0x0C) -#define MPI_FCPORTPAGE0_LTYPE_LED_SHORT_WAVE (0x0D) -#define MPI_FCPORTPAGE0_LTYPE_1300_LONG_WAVE (0x0E) -#define MPI_FCPORTPAGE0_LTYPE_1500_LONG_WAVE (0x0F) - -#define MPI_FCPORTPAGE0_PORTSTATE_UNKNOWN (0x01) /*(SNIA)HBA_PORTSTATE_UNKNOWN 1 Unknown */ -#define MPI_FCPORTPAGE0_PORTSTATE_ONLINE (0x02) /*(SNIA)HBA_PORTSTATE_ONLINE 2 Operational */ -#define MPI_FCPORTPAGE0_PORTSTATE_OFFLINE (0x03) /*(SNIA)HBA_PORTSTATE_OFFLINE 3 User Offline */ -#define MPI_FCPORTPAGE0_PORTSTATE_BYPASSED (0x04) /*(SNIA)HBA_PORTSTATE_BYPASSED 4 Bypassed */ -#define MPI_FCPORTPAGE0_PORTSTATE_DIAGNOST (0x05) /*(SNIA)HBA_PORTSTATE_DIAGNOSTICS 5 In diagnostics mode */ -#define MPI_FCPORTPAGE0_PORTSTATE_LINKDOWN (0x06) /*(SNIA)HBA_PORTSTATE_LINKDOWN 6 Link Down */ -#define MPI_FCPORTPAGE0_PORTSTATE_ERROR (0x07) /*(SNIA)HBA_PORTSTATE_ERROR 7 Port Error */ -#define MPI_FCPORTPAGE0_PORTSTATE_LOOPBACK (0x08) /*(SNIA)HBA_PORTSTATE_LOOPBACK 8 Loopback */ - -#define MPI_FCPORTPAGE0_SUPPORT_CLASS_1 (0x00000001) -#define MPI_FCPORTPAGE0_SUPPORT_CLASS_2 (0x00000002) -#define MPI_FCPORTPAGE0_SUPPORT_CLASS_3 (0x00000004) - -#define MPI_FCPORTPAGE0_SUPPORT_1GBIT_SPEED (0x00000001) /* (SNIA)HBA_PORTSPEED_1GBIT 1 1 GBit/sec */ -#define MPI_FCPORTPAGE0_SUPPORT_2GBIT_SPEED (0x00000002) /* (SNIA)HBA_PORTSPEED_2GBIT 2 2 GBit/sec */ -#define MPI_FCPORTPAGE0_SUPPORT_10GBIT_SPEED (0x00000004) /* (SNIA)HBA_PORTSPEED_10GBIT 4 10 GBit/sec */ - -#define MPI_FCPORTPAGE0_CURRENT_SPEED_1GBIT MPI_FCPORTPAGE0_SUPPORT_1GBIT_SPEED -#define MPI_FCPORTPAGE0_CURRENT_SPEED_2GBIT MPI_FCPORTPAGE0_SUPPORT_2GBIT_SPEED -#define MPI_FCPORTPAGE0_CURRENT_SPEED_10GBIT MPI_FCPORTPAGE0_SUPPORT_10GBIT_SPEED - - -typedef struct _CONFIG_PAGE_FC_PORT_1 -{ - CONFIG_PAGE_HEADER Header; /* 00h */ - U32 Flags; /* 04h */ - U64 NoSEEPROMWWNN; /* 08h */ - U64 NoSEEPROMWWPN; /* 10h */ - U8 HardALPA; /* 18h */ - U8 LinkConfig; /* 19h */ - U8 TopologyConfig; /* 1Ah */ - U8 AltConnector; /* 1Bh */ - U8 NumRequestedAliases; /* 1Ch */ - U8 RR_TOV; /* 1Dh */ - U8 InitiatorDeviceTimeout; /* 1Eh */ - U8 InitiatorIoPendTimeout; /* 1Fh */ -} CONFIG_PAGE_FC_PORT_1, MPI_POINTER PTR_CONFIG_PAGE_FC_PORT_1, - FCPortPage1_t, MPI_POINTER pFCPortPage1_t; - -#define MPI_FCPORTPAGE1_PAGEVERSION (0x06) - -#define MPI_FCPORTPAGE1_FLAGS_EXT_FCP_STATUS_EN (0x08000000) -#define MPI_FCPORTPAGE1_FLAGS_IMMEDIATE_ERROR_REPLY (0x04000000) -#define MPI_FCPORTPAGE1_FLAGS_FORCE_USE_NOSEEPROM_WWNS (0x02000000) -#define MPI_FCPORTPAGE1_FLAGS_VERBOSE_RESCAN_EVENTS (0x01000000) -#define MPI_FCPORTPAGE1_FLAGS_TARGET_MODE_OXID (0x00800000) -#define MPI_FCPORTPAGE1_FLAGS_PORT_OFFLINE (0x00400000) -#define MPI_FCPORTPAGE1_FLAGS_SOFT_ALPA_FALLBACK (0x00200000) -#define MPI_FCPORTPAGE1_FLAGS_MASK_RR_TOV_UNITS (0x00000070) -#define MPI_FCPORTPAGE1_FLAGS_SUPPRESS_PROT_REG (0x00000008) -#define MPI_FCPORTPAGE1_FLAGS_PLOGI_ON_LOGO (0x00000004) -#define MPI_FCPORTPAGE1_FLAGS_MAINTAIN_LOGINS (0x00000002) -#define MPI_FCPORTPAGE1_FLAGS_SORT_BY_DID (0x00000001) -#define MPI_FCPORTPAGE1_FLAGS_SORT_BY_WWN (0x00000000) - -#define MPI_FCPORTPAGE1_FLAGS_PROT_MASK (0xF0000000) -#define MPI_FCPORTPAGE1_FLAGS_PROT_SHIFT (28) -#define MPI_FCPORTPAGE1_FLAGS_PROT_FCP_INIT ((U32)MPI_PORTFACTS_PROTOCOL_INITIATOR << MPI_FCPORTPAGE1_FLAGS_PROT_SHIFT) -#define MPI_FCPORTPAGE1_FLAGS_PROT_FCP_TARG ((U32)MPI_PORTFACTS_PROTOCOL_TARGET << MPI_FCPORTPAGE1_FLAGS_PROT_SHIFT) -#define MPI_FCPORTPAGE1_FLAGS_PROT_LAN ((U32)MPI_PORTFACTS_PROTOCOL_LAN << MPI_FCPORTPAGE1_FLAGS_PROT_SHIFT) -#define MPI_FCPORTPAGE1_FLAGS_PROT_LOGBUSADDR ((U32)MPI_PORTFACTS_PROTOCOL_LOGBUSADDR << MPI_FCPORTPAGE1_FLAGS_PROT_SHIFT) - -#define MPI_FCPORTPAGE1_FLAGS_NONE_RR_TOV_UNITS (0x00000000) -#define MPI_FCPORTPAGE1_FLAGS_THOUSANDTH_RR_TOV_UNITS (0x00000010) -#define MPI_FCPORTPAGE1_FLAGS_TENTH_RR_TOV_UNITS (0x00000030) -#define MPI_FCPORTPAGE1_FLAGS_TEN_RR_TOV_UNITS (0x00000050) - -#define MPI_FCPORTPAGE1_HARD_ALPA_NOT_USED (0xFF) - -#define MPI_FCPORTPAGE1_LCONFIG_SPEED_MASK (0x0F) -#define MPI_FCPORTPAGE1_LCONFIG_SPEED_1GIG (0x00) -#define MPI_FCPORTPAGE1_LCONFIG_SPEED_2GIG (0x01) -#define MPI_FCPORTPAGE1_LCONFIG_SPEED_4GIG (0x02) -#define MPI_FCPORTPAGE1_LCONFIG_SPEED_10GIG (0x03) -#define MPI_FCPORTPAGE1_LCONFIG_SPEED_AUTO (0x0F) - -#define MPI_FCPORTPAGE1_TOPOLOGY_MASK (0x0F) -#define MPI_FCPORTPAGE1_TOPOLOGY_NLPORT (0x01) -#define MPI_FCPORTPAGE1_TOPOLOGY_NPORT (0x02) -#define MPI_FCPORTPAGE1_TOPOLOGY_AUTO (0x0F) - -#define MPI_FCPORTPAGE1_ALT_CONN_UNKNOWN (0x00) - -#define MPI_FCPORTPAGE1_INITIATOR_DEV_TIMEOUT_MASK (0x7F) -#define MPI_FCPORTPAGE1_INITIATOR_DEV_UNIT_16 (0x80) - - -typedef struct _CONFIG_PAGE_FC_PORT_2 -{ - CONFIG_PAGE_HEADER Header; /* 00h */ - U8 NumberActive; /* 04h */ - U8 ALPA[127]; /* 05h */ -} CONFIG_PAGE_FC_PORT_2, MPI_POINTER PTR_CONFIG_PAGE_FC_PORT_2, - FCPortPage2_t, MPI_POINTER pFCPortPage2_t; - -#define MPI_FCPORTPAGE2_PAGEVERSION (0x01) - - -typedef struct _WWN_FORMAT -{ - U64 WWNN; /* 00h */ - U64 WWPN; /* 08h */ -} WWN_FORMAT, MPI_POINTER PTR_WWN_FORMAT, - WWNFormat, MPI_POINTER pWWNFormat; - -typedef union _FC_PORT_PERSISTENT_PHYSICAL_ID -{ - WWN_FORMAT WWN; - U32 Did; -} FC_PORT_PERSISTENT_PHYSICAL_ID, MPI_POINTER PTR_FC_PORT_PERSISTENT_PHYSICAL_ID, - PersistentPhysicalId_t, MPI_POINTER pPersistentPhysicalId_t; - -typedef struct _FC_PORT_PERSISTENT -{ - FC_PORT_PERSISTENT_PHYSICAL_ID PhysicalIdentifier; /* 00h */ - U8 TargetID; /* 10h */ - U8 Bus; /* 11h */ - U16 Flags; /* 12h */ -} FC_PORT_PERSISTENT, MPI_POINTER PTR_FC_PORT_PERSISTENT, - PersistentData_t, MPI_POINTER pPersistentData_t; - -#define MPI_PERSISTENT_FLAGS_SHIFT (16) -#define MPI_PERSISTENT_FLAGS_ENTRY_VALID (0x0001) -#define MPI_PERSISTENT_FLAGS_SCAN_ID (0x0002) -#define MPI_PERSISTENT_FLAGS_SCAN_LUNS (0x0004) -#define MPI_PERSISTENT_FLAGS_BOOT_DEVICE (0x0008) -#define MPI_PERSISTENT_FLAGS_BY_DID (0x0080) - -/* - * Host code (drivers, BIOS, utilities, etc.) should leave this define set to - * one and check Header.PageLength at runtime. - */ -#ifndef MPI_FC_PORT_PAGE_3_ENTRY_MAX -#define MPI_FC_PORT_PAGE_3_ENTRY_MAX (1) -#endif - -typedef struct _CONFIG_PAGE_FC_PORT_3 -{ - CONFIG_PAGE_HEADER Header; /* 00h */ - FC_PORT_PERSISTENT Entry[MPI_FC_PORT_PAGE_3_ENTRY_MAX]; /* 04h */ -} CONFIG_PAGE_FC_PORT_3, MPI_POINTER PTR_CONFIG_PAGE_FC_PORT_3, - FCPortPage3_t, MPI_POINTER pFCPortPage3_t; - -#define MPI_FCPORTPAGE3_PAGEVERSION (0x01) - - -typedef struct _CONFIG_PAGE_FC_PORT_4 -{ - CONFIG_PAGE_HEADER Header; /* 00h */ - U32 PortFlags; /* 04h */ - U32 PortSettings; /* 08h */ -} CONFIG_PAGE_FC_PORT_4, MPI_POINTER PTR_CONFIG_PAGE_FC_PORT_4, - FCPortPage4_t, MPI_POINTER pFCPortPage4_t; - -#define MPI_FCPORTPAGE4_PAGEVERSION (0x00) - -#define MPI_FCPORTPAGE4_PORT_FLAGS_ALTERNATE_CHS (0x00000008) - -#define MPI_FCPORTPAGE4_PORT_MASK_INIT_HBA (0x00000030) -#define MPI_FCPORTPAGE4_PORT_DISABLE_INIT_HBA (0x00000000) -#define MPI_FCPORTPAGE4_PORT_BIOS_INIT_HBA (0x00000010) -#define MPI_FCPORTPAGE4_PORT_OS_INIT_HBA (0x00000020) -#define MPI_FCPORTPAGE4_PORT_BIOS_OS_INIT_HBA (0x00000030) -#define MPI_FCPORTPAGE4_PORT_REMOVABLE_MEDIA (0x000000C0) -#define MPI_FCPORTPAGE4_PORT_SPINUP_DELAY_MASK (0x00000F00) - - -typedef struct _CONFIG_PAGE_FC_PORT_5_ALIAS_INFO -{ - U8 Flags; /* 00h */ - U8 AliasAlpa; /* 01h */ - U16 Reserved; /* 02h */ - U64 AliasWWNN; /* 04h */ - U64 AliasWWPN; /* 0Ch */ -} CONFIG_PAGE_FC_PORT_5_ALIAS_INFO, - MPI_POINTER PTR_CONFIG_PAGE_FC_PORT_5_ALIAS_INFO, - FcPortPage5AliasInfo_t, MPI_POINTER pFcPortPage5AliasInfo_t; - -typedef struct _CONFIG_PAGE_FC_PORT_5 -{ - CONFIG_PAGE_HEADER Header; /* 00h */ - CONFIG_PAGE_FC_PORT_5_ALIAS_INFO AliasInfo; /* 04h */ -} CONFIG_PAGE_FC_PORT_5, MPI_POINTER PTR_CONFIG_PAGE_FC_PORT_5, - FCPortPage5_t, MPI_POINTER pFCPortPage5_t; - -#define MPI_FCPORTPAGE5_PAGEVERSION (0x02) - -#define MPI_FCPORTPAGE5_FLAGS_ALPA_ACQUIRED (0x01) -#define MPI_FCPORTPAGE5_FLAGS_HARD_ALPA (0x02) -#define MPI_FCPORTPAGE5_FLAGS_HARD_WWNN (0x04) -#define MPI_FCPORTPAGE5_FLAGS_HARD_WWPN (0x08) -#define MPI_FCPORTPAGE5_FLAGS_DISABLE (0x10) - -typedef struct _CONFIG_PAGE_FC_PORT_6 -{ - CONFIG_PAGE_HEADER Header; /* 00h */ - U32 Reserved; /* 04h */ - U64 TimeSinceReset; /* 08h */ - U64 TxFrames; /* 10h */ - U64 RxFrames; /* 18h */ - U64 TxWords; /* 20h */ - U64 RxWords; /* 28h */ - U64 LipCount; /* 30h */ - U64 NosCount; /* 38h */ - U64 ErrorFrames; /* 40h */ - U64 DumpedFrames; /* 48h */ - U64 LinkFailureCount; /* 50h */ - U64 LossOfSyncCount; /* 58h */ - U64 LossOfSignalCount; /* 60h */ - U64 PrimativeSeqErrCount; /* 68h */ - U64 InvalidTxWordCount; /* 70h */ - U64 InvalidCrcCount; /* 78h */ - U64 FcpInitiatorIoCount; /* 80h */ -} CONFIG_PAGE_FC_PORT_6, MPI_POINTER PTR_CONFIG_PAGE_FC_PORT_6, - FCPortPage6_t, MPI_POINTER pFCPortPage6_t; - -#define MPI_FCPORTPAGE6_PAGEVERSION (0x00) - - -typedef struct _CONFIG_PAGE_FC_PORT_7 -{ - CONFIG_PAGE_HEADER Header; /* 00h */ - U32 Reserved; /* 04h */ - U8 PortSymbolicName[256]; /* 08h */ -} CONFIG_PAGE_FC_PORT_7, MPI_POINTER PTR_CONFIG_PAGE_FC_PORT_7, - FCPortPage7_t, MPI_POINTER pFCPortPage7_t; - -#define MPI_FCPORTPAGE7_PAGEVERSION (0x00) - - -typedef struct _CONFIG_PAGE_FC_PORT_8 -{ - CONFIG_PAGE_HEADER Header; /* 00h */ - U32 BitVector[8]; /* 04h */ -} CONFIG_PAGE_FC_PORT_8, MPI_POINTER PTR_CONFIG_PAGE_FC_PORT_8, - FCPortPage8_t, MPI_POINTER pFCPortPage8_t; - -#define MPI_FCPORTPAGE8_PAGEVERSION (0x00) - - -typedef struct _CONFIG_PAGE_FC_PORT_9 -{ - CONFIG_PAGE_HEADER Header; /* 00h */ - U32 Reserved; /* 04h */ - U64 GlobalWWPN; /* 08h */ - U64 GlobalWWNN; /* 10h */ - U32 UnitType; /* 18h */ - U32 PhysicalPortNumber; /* 1Ch */ - U32 NumAttachedNodes; /* 20h */ - U16 IPVersion; /* 24h */ - U16 UDPPortNumber; /* 26h */ - U8 IPAddress[16]; /* 28h */ - U16 Reserved1; /* 38h */ - U16 TopologyDiscoveryFlags; /* 3Ah */ -} CONFIG_PAGE_FC_PORT_9, MPI_POINTER PTR_CONFIG_PAGE_FC_PORT_9, - FCPortPage9_t, MPI_POINTER pFCPortPage9_t; - -#define MPI_FCPORTPAGE9_PAGEVERSION (0x00) - - -typedef struct _CONFIG_PAGE_FC_PORT_10_BASE_SFP_DATA -{ - U8 Id; /* 10h */ - U8 ExtId; /* 11h */ - U8 Connector; /* 12h */ - U8 Transceiver[8]; /* 13h */ - U8 Encoding; /* 1Bh */ - U8 BitRate_100mbs; /* 1Ch */ - U8 Reserved1; /* 1Dh */ - U8 Length9u_km; /* 1Eh */ - U8 Length9u_100m; /* 1Fh */ - U8 Length50u_10m; /* 20h */ - U8 Length62p5u_10m; /* 21h */ - U8 LengthCopper_m; /* 22h */ - U8 Reseverved2; /* 22h */ - U8 VendorName[16]; /* 24h */ - U8 Reserved3; /* 34h */ - U8 VendorOUI[3]; /* 35h */ - U8 VendorPN[16]; /* 38h */ - U8 VendorRev[4]; /* 48h */ - U16 Wavelength; /* 4Ch */ - U8 Reserved4; /* 4Eh */ - U8 CC_BASE; /* 4Fh */ -} CONFIG_PAGE_FC_PORT_10_BASE_SFP_DATA, - MPI_POINTER PTR_CONFIG_PAGE_FC_PORT_10_BASE_SFP_DATA, - FCPortPage10BaseSfpData_t, MPI_POINTER pFCPortPage10BaseSfpData_t; - -#define MPI_FCPORT10_BASE_ID_UNKNOWN (0x00) -#define MPI_FCPORT10_BASE_ID_GBIC (0x01) -#define MPI_FCPORT10_BASE_ID_FIXED (0x02) -#define MPI_FCPORT10_BASE_ID_SFP (0x03) -#define MPI_FCPORT10_BASE_ID_SFP_MIN (0x04) -#define MPI_FCPORT10_BASE_ID_SFP_MAX (0x7F) -#define MPI_FCPORT10_BASE_ID_VEND_SPEC_MASK (0x80) - -#define MPI_FCPORT10_BASE_EXTID_UNKNOWN (0x00) -#define MPI_FCPORT10_BASE_EXTID_MODDEF1 (0x01) -#define MPI_FCPORT10_BASE_EXTID_MODDEF2 (0x02) -#define MPI_FCPORT10_BASE_EXTID_MODDEF3 (0x03) -#define MPI_FCPORT10_BASE_EXTID_SEEPROM (0x04) -#define MPI_FCPORT10_BASE_EXTID_MODDEF5 (0x05) -#define MPI_FCPORT10_BASE_EXTID_MODDEF6 (0x06) -#define MPI_FCPORT10_BASE_EXTID_MODDEF7 (0x07) -#define MPI_FCPORT10_BASE_EXTID_VNDSPC_MASK (0x80) - -#define MPI_FCPORT10_BASE_CONN_UNKNOWN (0x00) -#define MPI_FCPORT10_BASE_CONN_SC (0x01) -#define MPI_FCPORT10_BASE_CONN_COPPER1 (0x02) -#define MPI_FCPORT10_BASE_CONN_COPPER2 (0x03) -#define MPI_FCPORT10_BASE_CONN_BNC_TNC (0x04) -#define MPI_FCPORT10_BASE_CONN_COAXIAL (0x05) -#define MPI_FCPORT10_BASE_CONN_FIBERJACK (0x06) -#define MPI_FCPORT10_BASE_CONN_LC (0x07) -#define MPI_FCPORT10_BASE_CONN_MT_RJ (0x08) -#define MPI_FCPORT10_BASE_CONN_MU (0x09) -#define MPI_FCPORT10_BASE_CONN_SG (0x0A) -#define MPI_FCPORT10_BASE_CONN_OPT_PIGT (0x0B) -#define MPI_FCPORT10_BASE_CONN_RSV1_MIN (0x0C) -#define MPI_FCPORT10_BASE_CONN_RSV1_MAX (0x1F) -#define MPI_FCPORT10_BASE_CONN_HSSDC_II (0x20) -#define MPI_FCPORT10_BASE_CONN_CPR_PIGT (0x21) -#define MPI_FCPORT10_BASE_CONN_RSV2_MIN (0x22) -#define MPI_FCPORT10_BASE_CONN_RSV2_MAX (0x7F) -#define MPI_FCPORT10_BASE_CONN_VNDSPC_MASK (0x80) - -#define MPI_FCPORT10_BASE_ENCODE_UNSPEC (0x00) -#define MPI_FCPORT10_BASE_ENCODE_8B10B (0x01) -#define MPI_FCPORT10_BASE_ENCODE_4B5B (0x02) -#define MPI_FCPORT10_BASE_ENCODE_NRZ (0x03) -#define MPI_FCPORT10_BASE_ENCODE_MANCHESTER (0x04) - - -typedef struct _CONFIG_PAGE_FC_PORT_10_EXTENDED_SFP_DATA -{ - U8 Options[2]; /* 50h */ - U8 BitRateMax; /* 52h */ - U8 BitRateMin; /* 53h */ - U8 VendorSN[16]; /* 54h */ - U8 DateCode[8]; /* 64h */ - U8 DiagMonitoringType; /* 6Ch */ - U8 EnhancedOptions; /* 6Dh */ - U8 SFF8472Compliance; /* 6Eh */ - U8 CC_EXT; /* 6Fh */ -} CONFIG_PAGE_FC_PORT_10_EXTENDED_SFP_DATA, - MPI_POINTER PTR_CONFIG_PAGE_FC_PORT_10_EXTENDED_SFP_DATA, - FCPortPage10ExtendedSfpData_t, MPI_POINTER pFCPortPage10ExtendedSfpData_t; - -#define MPI_FCPORT10_EXT_OPTION1_RATESEL (0x20) -#define MPI_FCPORT10_EXT_OPTION1_TX_DISABLE (0x10) -#define MPI_FCPORT10_EXT_OPTION1_TX_FAULT (0x08) -#define MPI_FCPORT10_EXT_OPTION1_LOS_INVERT (0x04) -#define MPI_FCPORT10_EXT_OPTION1_LOS (0x02) - - -typedef struct _CONFIG_PAGE_FC_PORT_10 -{ - CONFIG_PAGE_HEADER Header; /* 00h */ - U8 Flags; /* 04h */ - U8 Reserved1; /* 05h */ - U16 Reserved2; /* 06h */ - U32 HwConfig1; /* 08h */ - U32 HwConfig2; /* 0Ch */ - CONFIG_PAGE_FC_PORT_10_BASE_SFP_DATA Base; /* 10h */ - CONFIG_PAGE_FC_PORT_10_EXTENDED_SFP_DATA Extended; /* 50h */ - U8 VendorSpecific[32]; /* 70h */ -} CONFIG_PAGE_FC_PORT_10, MPI_POINTER PTR_CONFIG_PAGE_FC_PORT_10, - FCPortPage10_t, MPI_POINTER pFCPortPage10_t; - -#define MPI_FCPORTPAGE10_PAGEVERSION (0x01) - -/* standard MODDEF pin definitions (from GBIC spec.) */ -#define MPI_FCPORTPAGE10_FLAGS_MODDEF_MASK (0x00000007) -#define MPI_FCPORTPAGE10_FLAGS_MODDEF2 (0x00000001) -#define MPI_FCPORTPAGE10_FLAGS_MODDEF1 (0x00000002) -#define MPI_FCPORTPAGE10_FLAGS_MODDEF0 (0x00000004) -#define MPI_FCPORTPAGE10_FLAGS_MODDEF_NOGBIC (0x00000007) -#define MPI_FCPORTPAGE10_FLAGS_MODDEF_CPR_IEEE_CX (0x00000006) -#define MPI_FCPORTPAGE10_FLAGS_MODDEF_COPPER (0x00000005) -#define MPI_FCPORTPAGE10_FLAGS_MODDEF_OPTICAL_LW (0x00000004) -#define MPI_FCPORTPAGE10_FLAGS_MODDEF_SEEPROM (0x00000003) -#define MPI_FCPORTPAGE10_FLAGS_MODDEF_SW_OPTICAL (0x00000002) -#define MPI_FCPORTPAGE10_FLAGS_MODDEF_LX_IEEE_OPT_LW (0x00000001) -#define MPI_FCPORTPAGE10_FLAGS_MODDEF_SX_IEEE_OPT_SW (0x00000000) - -#define MPI_FCPORTPAGE10_FLAGS_CC_BASE_OK (0x00000010) -#define MPI_FCPORTPAGE10_FLAGS_CC_EXT_OK (0x00000020) - - -/**************************************************************************** -* FC Device Config Pages -****************************************************************************/ - -typedef struct _CONFIG_PAGE_FC_DEVICE_0 -{ - CONFIG_PAGE_HEADER Header; /* 00h */ - U64 WWNN; /* 04h */ - U64 WWPN; /* 0Ch */ - U32 PortIdentifier; /* 14h */ - U8 Protocol; /* 18h */ - U8 Flags; /* 19h */ - U16 BBCredit; /* 1Ah */ - U16 MaxRxFrameSize; /* 1Ch */ - U8 ADISCHardALPA; /* 1Eh */ - U8 PortNumber; /* 1Fh */ - U8 FcPhLowestVersion; /* 20h */ - U8 FcPhHighestVersion; /* 21h */ - U8 CurrentTargetID; /* 22h */ - U8 CurrentBus; /* 23h */ -} CONFIG_PAGE_FC_DEVICE_0, MPI_POINTER PTR_CONFIG_PAGE_FC_DEVICE_0, - FCDevicePage0_t, MPI_POINTER pFCDevicePage0_t; - -#define MPI_FC_DEVICE_PAGE0_PAGEVERSION (0x03) - -#define MPI_FC_DEVICE_PAGE0_FLAGS_TARGETID_BUS_VALID (0x01) -#define MPI_FC_DEVICE_PAGE0_FLAGS_PLOGI_INVALID (0x02) -#define MPI_FC_DEVICE_PAGE0_FLAGS_PRLI_INVALID (0x04) - -#define MPI_FC_DEVICE_PAGE0_PROT_IP (0x01) -#define MPI_FC_DEVICE_PAGE0_PROT_FCP_TARGET (0x02) -#define MPI_FC_DEVICE_PAGE0_PROT_FCP_INITIATOR (0x04) -#define MPI_FC_DEVICE_PAGE0_PROT_FCP_RETRY (0x08) - -#define MPI_FC_DEVICE_PAGE0_PGAD_PORT_MASK (MPI_FC_DEVICE_PGAD_PORT_MASK) -#define MPI_FC_DEVICE_PAGE0_PGAD_FORM_MASK (MPI_FC_DEVICE_PGAD_FORM_MASK) -#define MPI_FC_DEVICE_PAGE0_PGAD_FORM_NEXT_DID (MPI_FC_DEVICE_PGAD_FORM_NEXT_DID) -#define MPI_FC_DEVICE_PAGE0_PGAD_FORM_BUS_TID (MPI_FC_DEVICE_PGAD_FORM_BUS_TID) -#define MPI_FC_DEVICE_PAGE0_PGAD_DID_MASK (MPI_FC_DEVICE_PGAD_ND_DID_MASK) -#define MPI_FC_DEVICE_PAGE0_PGAD_BUS_MASK (MPI_FC_DEVICE_PGAD_BT_BUS_MASK) -#define MPI_FC_DEVICE_PAGE0_PGAD_BUS_SHIFT (MPI_FC_DEVICE_PGAD_BT_BUS_SHIFT) -#define MPI_FC_DEVICE_PAGE0_PGAD_TID_MASK (MPI_FC_DEVICE_PGAD_BT_TID_MASK) - -#define MPI_FC_DEVICE_PAGE0_HARD_ALPA_UNKNOWN (0xFF) - -/**************************************************************************** -* RAID Volume Config Pages -****************************************************************************/ - -typedef struct _RAID_VOL0_PHYS_DISK -{ - U16 Reserved; /* 00h */ - U8 PhysDiskMap; /* 02h */ - U8 PhysDiskNum; /* 03h */ -} RAID_VOL0_PHYS_DISK, MPI_POINTER PTR_RAID_VOL0_PHYS_DISK, - RaidVol0PhysDisk_t, MPI_POINTER pRaidVol0PhysDisk_t; - -#define MPI_RAIDVOL0_PHYSDISK_PRIMARY (0x01) -#define MPI_RAIDVOL0_PHYSDISK_SECONDARY (0x02) - -typedef struct _RAID_VOL0_STATUS -{ - U8 Flags; /* 00h */ - U8 State; /* 01h */ - U16 Reserved; /* 02h */ -} RAID_VOL0_STATUS, MPI_POINTER PTR_RAID_VOL0_STATUS, - RaidVol0Status_t, MPI_POINTER pRaidVol0Status_t; - -/* RAID Volume Page 0 VolumeStatus defines */ - -#define MPI_RAIDVOL0_STATUS_FLAG_ENABLED (0x01) -#define MPI_RAIDVOL0_STATUS_FLAG_QUIESCED (0x02) -#define MPI_RAIDVOL0_STATUS_FLAG_RESYNC_IN_PROGRESS (0x04) -#define MPI_RAIDVOL0_STATUS_FLAG_VOLUME_INACTIVE (0x08) - -#define MPI_RAIDVOL0_STATUS_STATE_OPTIMAL (0x00) -#define MPI_RAIDVOL0_STATUS_STATE_DEGRADED (0x01) -#define MPI_RAIDVOL0_STATUS_STATE_FAILED (0x02) - -typedef struct _RAID_VOL0_SETTINGS -{ - U16 Settings; /* 00h */ - U8 HotSparePool; /* 01h */ /* MPI_RAID_HOT_SPARE_POOL_ */ - U8 Reserved; /* 02h */ -} RAID_VOL0_SETTINGS, MPI_POINTER PTR_RAID_VOL0_SETTINGS, - RaidVol0Settings, MPI_POINTER pRaidVol0Settings; - -/* RAID Volume Page 0 VolumeSettings defines */ - -#define MPI_RAIDVOL0_SETTING_WRITE_CACHING_ENABLE (0x0001) -#define MPI_RAIDVOL0_SETTING_OFFLINE_ON_SMART (0x0002) -#define MPI_RAIDVOL0_SETTING_AUTO_CONFIGURE (0x0004) -#define MPI_RAIDVOL0_SETTING_PRIORITY_RESYNC (0x0008) -#define MPI_RAIDVOL0_SETTING_USE_PRODUCT_ID_SUFFIX (0x0010) -#define MPI_RAIDVOL0_SETTING_USE_DEFAULTS (0x8000) - -/* RAID Volume Page 0 HotSparePool defines, also used in RAID Physical Disk */ -#define MPI_RAID_HOT_SPARE_POOL_0 (0x01) -#define MPI_RAID_HOT_SPARE_POOL_1 (0x02) -#define MPI_RAID_HOT_SPARE_POOL_2 (0x04) -#define MPI_RAID_HOT_SPARE_POOL_3 (0x08) -#define MPI_RAID_HOT_SPARE_POOL_4 (0x10) -#define MPI_RAID_HOT_SPARE_POOL_5 (0x20) -#define MPI_RAID_HOT_SPARE_POOL_6 (0x40) -#define MPI_RAID_HOT_SPARE_POOL_7 (0x80) - -/* - * Host code (drivers, BIOS, utilities, etc.) should leave this define set to - * one and check Header.PageLength at runtime. - */ -#ifndef MPI_RAID_VOL_PAGE_0_PHYSDISK_MAX -#define MPI_RAID_VOL_PAGE_0_PHYSDISK_MAX (1) -#endif - -typedef struct _CONFIG_PAGE_RAID_VOL_0 -{ - CONFIG_PAGE_HEADER Header; /* 00h */ - U8 VolumeID; /* 04h */ - U8 VolumeBus; /* 05h */ - U8 VolumeIOC; /* 06h */ - U8 VolumeType; /* 07h */ /* MPI_RAID_VOL_TYPE_ */ - RAID_VOL0_STATUS VolumeStatus; /* 08h */ - RAID_VOL0_SETTINGS VolumeSettings; /* 0Ch */ - U32 MaxLBA; /* 10h */ - U32 Reserved1; /* 14h */ - U32 StripeSize; /* 18h */ - U32 Reserved2; /* 1Ch */ - U32 Reserved3; /* 20h */ - U8 NumPhysDisks; /* 24h */ - U8 DataScrubRate; /* 25h */ - U8 ResyncRate; /* 26h */ - U8 InactiveStatus; /* 27h */ - RAID_VOL0_PHYS_DISK PhysDisk[MPI_RAID_VOL_PAGE_0_PHYSDISK_MAX];/* 28h */ -} CONFIG_PAGE_RAID_VOL_0, MPI_POINTER PTR_CONFIG_PAGE_RAID_VOL_0, - RaidVolumePage0_t, MPI_POINTER pRaidVolumePage0_t; - -#define MPI_RAIDVOLPAGE0_PAGEVERSION (0x01) - - -/**************************************************************************** -* RAID Physical Disk Config Pages -****************************************************************************/ - -typedef struct _RAID_PHYS_DISK0_ERROR_DATA -{ - U8 ErrorCdbByte; /* 00h */ - U8 ErrorSenseKey; /* 01h */ - U16 Reserved; /* 02h */ - U16 ErrorCount; /* 04h */ - U8 ErrorASC; /* 06h */ - U8 ErrorASCQ; /* 07h */ - U16 SmartCount; /* 08h */ - U8 SmartASC; /* 0Ah */ - U8 SmartASCQ; /* 0Bh */ -} RAID_PHYS_DISK0_ERROR_DATA, MPI_POINTER PTR_RAID_PHYS_DISK0_ERROR_DATA, - RaidPhysDisk0ErrorData_t, MPI_POINTER pRaidPhysDisk0ErrorData_t; - -typedef struct _RAID_PHYS_DISK_INQUIRY_DATA -{ - U8 VendorID[8]; /* 00h */ - U8 ProductID[16]; /* 08h */ - U8 ProductRevLevel[4]; /* 18h */ - U8 Info[32]; /* 1Ch */ -} RAID_PHYS_DISK0_INQUIRY_DATA, MPI_POINTER PTR_RAID_PHYS_DISK0_INQUIRY_DATA, - RaidPhysDisk0InquiryData, MPI_POINTER pRaidPhysDisk0InquiryData; - -typedef struct _RAID_PHYS_DISK0_SETTINGS -{ - U8 SepID; /* 00h */ - U8 SepBus; /* 01h */ - U8 HotSparePool; /* 02h */ /* MPI_RAID_HOT_SPARE_POOL_ */ - U8 PhysDiskSettings; /* 03h */ -} RAID_PHYS_DISK0_SETTINGS, MPI_POINTER PTR_RAID_PHYS_DISK0_SETTINGS, - RaidPhysDiskSettings_t, MPI_POINTER pRaidPhysDiskSettings_t; - -typedef struct _RAID_PHYS_DISK0_STATUS -{ - U8 Flags; /* 00h */ - U8 State; /* 01h */ - U16 Reserved; /* 02h */ -} RAID_PHYS_DISK0_STATUS, MPI_POINTER PTR_RAID_PHYS_DISK0_STATUS, - RaidPhysDiskStatus_t, MPI_POINTER pRaidPhysDiskStatus_t; - -/* RAID Volume 2 IM Physical Disk DiskStatus flags */ - -#define MPI_PHYSDISK0_STATUS_FLAG_OUT_OF_SYNC (0x01) -#define MPI_PHYSDISK0_STATUS_FLAG_QUIESCED (0x02) - -#define MPI_PHYSDISK0_STATUS_ONLINE (0x00) -#define MPI_PHYSDISK0_STATUS_MISSING (0x01) -#define MPI_PHYSDISK0_STATUS_NOT_COMPATIBLE (0x02) -#define MPI_PHYSDISK0_STATUS_FAILED (0x03) -#define MPI_PHYSDISK0_STATUS_INITIALIZING (0x04) -#define MPI_PHYSDISK0_STATUS_OFFLINE_REQUESTED (0x05) -#define MPI_PHYSDISK0_STATUS_FAILED_REQUESTED (0x06) -#define MPI_PHYSDISK0_STATUS_OTHER_OFFLINE (0xFF) - -typedef struct _CONFIG_PAGE_RAID_PHYS_DISK_0 -{ - CONFIG_PAGE_HEADER Header; /* 00h */ - U8 PhysDiskID; /* 04h */ - U8 PhysDiskBus; /* 05h */ - U8 PhysDiskIOC; /* 06h */ - U8 PhysDiskNum; /* 07h */ - RAID_PHYS_DISK0_SETTINGS PhysDiskSettings; /* 08h */ - U32 Reserved1; /* 0Ch */ - U32 Reserved2; /* 10h */ - U32 Reserved3; /* 14h */ - U8 DiskIdentifier[16]; /* 18h */ - RAID_PHYS_DISK0_INQUIRY_DATA InquiryData; /* 28h */ - RAID_PHYS_DISK0_STATUS PhysDiskStatus; /* 64h */ - U32 MaxLBA; /* 68h */ - RAID_PHYS_DISK0_ERROR_DATA ErrorData; /* 6Ch */ -} CONFIG_PAGE_RAID_PHYS_DISK_0, MPI_POINTER PTR_CONFIG_PAGE_RAID_PHYS_DISK_0, - RaidPhysDiskPage0_t, MPI_POINTER pRaidPhysDiskPage0_t; - -#define MPI_RAIDPHYSDISKPAGE0_PAGEVERSION (0x00) - - -/**************************************************************************** -* LAN Config Pages -****************************************************************************/ - -typedef struct _CONFIG_PAGE_LAN_0 -{ - ConfigPageHeader_t Header; /* 00h */ - U16 TxRxModes; /* 04h */ - U16 Reserved; /* 06h */ - U32 PacketPrePad; /* 08h */ -} CONFIG_PAGE_LAN_0, MPI_POINTER PTR_CONFIG_PAGE_LAN_0, - LANPage0_t, MPI_POINTER pLANPage0_t; - -#define MPI_LAN_PAGE0_PAGEVERSION (0x01) - -#define MPI_LAN_PAGE0_RETURN_LOOPBACK (0x0000) -#define MPI_LAN_PAGE0_SUPPRESS_LOOPBACK (0x0001) -#define MPI_LAN_PAGE0_LOOPBACK_MASK (0x0001) - -typedef struct _CONFIG_PAGE_LAN_1 -{ - ConfigPageHeader_t Header; /* 00h */ - U16 Reserved; /* 04h */ - U8 CurrentDeviceState; /* 06h */ - U8 Reserved1; /* 07h */ - U32 MinPacketSize; /* 08h */ - U32 MaxPacketSize; /* 0Ch */ - U32 HardwareAddressLow; /* 10h */ - U32 HardwareAddressHigh; /* 14h */ - U32 MaxWireSpeedLow; /* 18h */ - U32 MaxWireSpeedHigh; /* 1Ch */ - U32 BucketsRemaining; /* 20h */ - U32 MaxReplySize; /* 24h */ - U32 NegWireSpeedLow; /* 28h */ - U32 NegWireSpeedHigh; /* 2Ch */ -} CONFIG_PAGE_LAN_1, MPI_POINTER PTR_CONFIG_PAGE_LAN_1, - LANPage1_t, MPI_POINTER pLANPage1_t; - -#define MPI_LAN_PAGE1_PAGEVERSION (0x03) - -#define MPI_LAN_PAGE1_DEV_STATE_RESET (0x00) -#define MPI_LAN_PAGE1_DEV_STATE_OPERATIONAL (0x01) - -#endif - -/* $FreeBSD: /repoman/r/ncvs/src/sys/dev/mpt/mpilib/mpi_fc.h,v 1.5 2005/07/10 15:05:39 scottl Exp $ */ -/*- - * Copyright (c) 2000-2005, LSI Logic Corporation and its contributors. - * All rights reserved. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions are - * met: - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce at minimum a disclaimer - * substantially similar to the "NO WARRANTY" disclaimer below - * ("Disclaimer") and any redistribution must be conditioned upon including - * a substantially similar Disclaimer requirement for further binary - * redistribution. - * 3. Neither the name of the LSI Logic Corporation nor the names of its - * contributors may be used to endorse or promote products derived from - * this software without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" - * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE - * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE - * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR - * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF - * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS - * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN - * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) - * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF THE COPYRIGHT - * OWNER OR CONTRIBUTOR IS ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - * - * Name: MPI_FC.H - * Title: MPI Fibre Channel messages and structures - * Creation Date: June 12, 2000 - * - * MPI_FC.H Version: 01.02.04 - * - * Version History - * --------------- - * - * Date Version Description - * -------- -------- ------------------------------------------------------ - * 05-08-00 00.10.01 Original release for 0.10 spec dated 4/26/2000. - * 06-06-00 01.00.01 Update version number for 1.0 release. - * 06-12-00 01.00.02 Added _MSG_FC_ABORT_REPLY structure. - * 11-02-00 01.01.01 Original release for post 1.0 work - * 12-04-00 01.01.02 Added messages for Common Transport Send and - * Primitive Send. - * 01-09-01 01.01.03 Modifed some of the new flags to have an MPI prefix - * and modified the FcPrimitiveSend flags. - * 01-25-01 01.01.04 Move InitiatorIndex in LinkServiceRsp reply to a larger - * field. - * Added FC_ABORT_TYPE_CT_SEND_REQUEST and - * FC_ABORT_TYPE_EXLINKSEND_REQUEST for FcAbort request. - * Added MPI_FC_PRIM_SEND_FLAGS_STOP_SEND. - * 02-20-01 01.01.05 Started using MPI_POINTER. - * 03-27-01 01.01.06 Added Flags field to MSG_LINK_SERVICE_BUFFER_POST_REPLY - * and defined MPI_LS_BUF_POST_REPLY_FLAG_NO_RSP_NEEDED. - * Added MPI_FC_PRIM_SEND_FLAGS_RESET_LINK define. - * Added structure offset comments. - * 04-09-01 01.01.07 Added RspLength field to MSG_LINK_SERVICE_RSP_REQUEST. - * 08-08-01 01.02.01 Original release for v1.2 work. - * 09-28-01 01.02.02 Change name of reserved field in - * MSG_LINK_SERVICE_RSP_REPLY. - * 05-31-02 01.02.03 Adding AliasIndex to FC Direct Access requests. - * 01-16-04 01.02.04 Added define for MPI_FC_PRIM_SEND_FLAGS_ML_RESET_LINK. - * -------------------------------------------------------------------------- - */ - -#ifndef MPI_FC_H -#define MPI_FC_H - - -/***************************************************************************** -* -* F C T a r g e t M o d e M e s s a g e s -* -*****************************************************************************/ - -/****************************************************************************/ -/* Link Service Buffer Post messages */ -/****************************************************************************/ - -typedef struct _MSG_LINK_SERVICE_BUFFER_POST_REQUEST -{ - U8 BufferPostFlags; /* 00h */ - U8 BufferCount; /* 01h */ - U8 ChainOffset; /* 02h */ - U8 Function; /* 03h */ - U16 Reserved; /* 04h */ - U8 Reserved1; /* 06h */ - U8 MsgFlags; /* 07h */ - U32 MsgContext; /* 08h */ - SGE_TRANS_SIMPLE_UNION SGL; -} MSG_LINK_SERVICE_BUFFER_POST_REQUEST, - MPI_POINTER PTR_MSG_LINK_SERVICE_BUFFER_POST_REQUEST, - LinkServiceBufferPostRequest_t, MPI_POINTER pLinkServiceBufferPostRequest_t; - -#define LINK_SERVICE_BUFFER_POST_FLAGS_PORT_MASK (0x01) - -typedef struct _WWNFORMAT -{ - U32 PortNameHigh; /* 00h */ - U32 PortNameLow; /* 04h */ - U32 NodeNameHigh; /* 08h */ - U32 NodeNameLow; /* 0Ch */ -} WWNFORMAT, - WwnFormat_t; - -/* Link Service Buffer Post Reply */ -typedef struct _MSG_LINK_SERVICE_BUFFER_POST_REPLY -{ - U8 Flags; /* 00h */ - U8 Reserved; /* 01h */ - U8 MsgLength; /* 02h */ - U8 Function; /* 03h */ - U16 Reserved1; /* 04h */ - U8 PortNumber; /* 06h */ - U8 MsgFlags; /* 07h */ - U32 MsgContext; /* 08h */ - U16 Reserved2; /* 0Ch */ - U16 IOCStatus; /* 0Eh */ - U32 IOCLogInfo; /* 10h */ - U32 TransferLength; /* 14h */ - U32 TransactionContext; /* 18h */ - U32 Rctl_Did; /* 1Ch */ - U32 Csctl_Sid; /* 20h */ - U32 Type_Fctl; /* 24h */ - U16 SeqCnt; /* 28h */ - U8 Dfctl; /* 2Ah */ - U8 SeqId; /* 2Bh */ - U16 Rxid; /* 2Ch */ - U16 Oxid; /* 2Eh */ - U32 Parameter; /* 30h */ - WWNFORMAT Wwn; /* 34h */ -} MSG_LINK_SERVICE_BUFFER_POST_REPLY, MPI_POINTER PTR_MSG_LINK_SERVICE_BUFFER_POST_REPLY, - LinkServiceBufferPostReply_t, MPI_POINTER pLinkServiceBufferPostReply_t; - -#define MPI_LS_BUF_POST_REPLY_FLAG_NO_RSP_NEEDED (0x80) - -#define MPI_FC_DID_MASK (0x00FFFFFF) -#define MPI_FC_DID_SHIFT (0) -#define MPI_FC_RCTL_MASK (0xFF000000) -#define MPI_FC_RCTL_SHIFT (24) -#define MPI_FC_SID_MASK (0x00FFFFFF) -#define MPI_FC_SID_SHIFT (0) -#define MPI_FC_CSCTL_MASK (0xFF000000) -#define MPI_FC_CSCTL_SHIFT (24) -#define MPI_FC_FCTL_MASK (0x00FFFFFF) -#define MPI_FC_FCTL_SHIFT (0) -#define MPI_FC_TYPE_MASK (0xFF000000) -#define MPI_FC_TYPE_SHIFT (24) - -/* obsolete name for the above */ -#define FCP_TARGET_DID_MASK (0x00FFFFFF) -#define FCP_TARGET_DID_SHIFT (0) -#define FCP_TARGET_RCTL_MASK (0xFF000000) -#define FCP_TARGET_RCTL_SHIFT (24) -#define FCP_TARGET_SID_MASK (0x00FFFFFF) -#define FCP_TARGET_SID_SHIFT (0) -#define FCP_TARGET_CSCTL_MASK (0xFF000000) -#define FCP_TARGET_CSCTL_SHIFT (24) -#define FCP_TARGET_FCTL_MASK (0x00FFFFFF) -#define FCP_TARGET_FCTL_SHIFT (0) -#define FCP_TARGET_TYPE_MASK (0xFF000000) -#define FCP_TARGET_TYPE_SHIFT (24) - - -/****************************************************************************/ -/* Link Service Response messages */ -/****************************************************************************/ - -typedef struct _MSG_LINK_SERVICE_RSP_REQUEST -{ - U8 RspFlags; /* 00h */ - U8 RspLength; /* 01h */ - U8 ChainOffset; /* 02h */ - U8 Function; /* 03h */ - U16 Reserved1; /* 04h */ - U8 Reserved2; /* 06h */ - U8 MsgFlags; /* 07h */ - U32 MsgContext; /* 08h */ - U32 Rctl_Did; /* 0Ch */ - U32 Csctl_Sid; /* 10h */ - U32 Type_Fctl; /* 14h */ - U16 SeqCnt; /* 18h */ - U8 Dfctl; /* 1Ah */ - U8 SeqId; /* 1Bh */ - U16 Rxid; /* 1Ch */ - U16 Oxid; /* 1Eh */ - U32 Parameter; /* 20h */ - SGE_SIMPLE_UNION SGL; /* 24h */ -} MSG_LINK_SERVICE_RSP_REQUEST, MPI_POINTER PTR_MSG_LINK_SERVICE_RSP_REQUEST, - LinkServiceRspRequest_t, MPI_POINTER pLinkServiceRspRequest_t; - -#define LINK_SERVICE_RSP_FLAGS_IMMEDIATE (0x80) -#define LINK_SERVICE_RSP_FLAGS_PORT_MASK (0x01) - - -/* Link Service Response Reply */ -typedef struct _MSG_LINK_SERVICE_RSP_REPLY -{ - U16 Reserved; /* 00h */ - U8 MsgLength; /* 02h */ - U8 Function; /* 03h */ - U16 Reserved1; /* 04h */ - U8 Reserved_0100_InitiatorIndex; /* 06h */ /* obsolete InitiatorIndex */ - U8 MsgFlags; /* 07h */ - U32 MsgContext; /* 08h */ - U16 Reserved3; /* 0Ch */ - U16 IOCStatus; /* 0Eh */ - U32 IOCLogInfo; /* 10h */ - U32 InitiatorIndex; /* 14h */ -} MSG_LINK_SERVICE_RSP_REPLY, MPI_POINTER PTR_MSG_LINK_SERVICE_RSP_REPLY, - LinkServiceRspReply_t, MPI_POINTER pLinkServiceRspReply_t; - - -/****************************************************************************/ -/* Extended Link Service Send messages */ -/****************************************************************************/ - -typedef struct _MSG_EXLINK_SERVICE_SEND_REQUEST -{ - U8 SendFlags; /* 00h */ - U8 AliasIndex; /* 01h */ - U8 ChainOffset; /* 02h */ - U8 Function; /* 03h */ - U32 MsgFlags_Did; /* 04h */ - U32 MsgContext; /* 08h */ - U32 ElsCommandCode; /* 0Ch */ - SGE_SIMPLE_UNION SGL; /* 10h */ -} MSG_EXLINK_SERVICE_SEND_REQUEST, MPI_POINTER PTR_MSG_EXLINK_SERVICE_SEND_REQUEST, - ExLinkServiceSendRequest_t, MPI_POINTER pExLinkServiceSendRequest_t; - -#define EX_LINK_SERVICE_SEND_DID_MASK (0x00FFFFFF) -#define EX_LINK_SERVICE_SEND_DID_SHIFT (0) -#define EX_LINK_SERVICE_SEND_MSGFLAGS_MASK (0xFF000000) -#define EX_LINK_SERVICE_SEND_MSGFLAGS_SHIFT (24) - - -/* Extended Link Service Send Reply */ -typedef struct _MSG_EXLINK_SERVICE_SEND_REPLY -{ - U8 Reserved; /* 00h */ - U8 AliasIndex; /* 01h */ - U8 MsgLength; /* 02h */ - U8 Function; /* 03h */ - U16 Reserved1; /* 04h */ - U8 Reserved2; /* 06h */ - U8 MsgFlags; /* 07h */ - U32 MsgContext; /* 08h */ - U16 Reserved3; /* 0Ch */ - U16 IOCStatus; /* 0Eh */ - U32 IOCLogInfo; /* 10h */ - U32 ResponseLength; /* 14h */ -} MSG_EXLINK_SERVICE_SEND_REPLY, MPI_POINTER PTR_MSG_EXLINK_SERVICE_SEND_REPLY, - ExLinkServiceSendReply_t, MPI_POINTER pExLinkServiceSendReply_t; - -/****************************************************************************/ -/* FC Abort messages */ -/****************************************************************************/ - -typedef struct _MSG_FC_ABORT_REQUEST -{ - U8 AbortFlags; /* 00h */ - U8 AbortType; /* 01h */ - U8 ChainOffset; /* 02h */ - U8 Function; /* 03h */ - U16 Reserved1; /* 04h */ - U8 Reserved2; /* 06h */ - U8 MsgFlags; /* 07h */ - U32 MsgContext; /* 08h */ - U32 TransactionContextToAbort; /* 0Ch */ -} MSG_FC_ABORT_REQUEST, MPI_POINTER PTR_MSG_FC_ABORT_REQUEST, - FcAbortRequest_t, MPI_POINTER pFcAbortRequest_t; - -#define FC_ABORT_FLAG_PORT_MASK (0x01) - -#define FC_ABORT_TYPE_ALL_FC_BUFFERS (0x00) -#define FC_ABORT_TYPE_EXACT_FC_BUFFER (0x01) -#define FC_ABORT_TYPE_CT_SEND_REQUEST (0x02) -#define FC_ABORT_TYPE_EXLINKSEND_REQUEST (0x03) - -/* FC Abort Reply */ -typedef struct _MSG_FC_ABORT_REPLY -{ - U16 Reserved; /* 00h */ - U8 MsgLength; /* 02h */ - U8 Function; /* 03h */ - U16 Reserved1; /* 04h */ - U8 Reserved2; /* 06h */ - U8 MsgFlags; /* 07h */ - U32 MsgContext; /* 08h */ - U16 Reserved3; /* 0Ch */ - U16 IOCStatus; /* 0Eh */ - U32 IOCLogInfo; /* 10h */ -} MSG_FC_ABORT_REPLY, MPI_POINTER PTR_MSG_FC_ABORT_REPLY, - FcAbortReply_t, MPI_POINTER pFcAbortReply_t; - - -/****************************************************************************/ -/* FC Common Transport Send messages */ -/****************************************************************************/ - -typedef struct _MSG_FC_COMMON_TRANSPORT_SEND_REQUEST -{ - U8 SendFlags; /* 00h */ - U8 AliasIndex; /* 01h */ - U8 ChainOffset; /* 02h */ - U8 Function; /* 03h */ - U32 MsgFlags_Did; /* 04h */ - U32 MsgContext; /* 08h */ - U16 CTCommandCode; /* 0Ch */ - U8 FsType; /* 0Eh */ - U8 Reserved1; /* 0Fh */ - SGE_SIMPLE_UNION SGL; /* 10h */ -} MSG_FC_COMMON_TRANSPORT_SEND_REQUEST, - MPI_POINTER PTR_MSG_FC_COMMON_TRANSPORT_SEND_REQUEST, - FcCommonTransportSendRequest_t, MPI_POINTER pFcCommonTransportSendRequest_t; - -#define MPI_FC_CT_SEND_DID_MASK (0x00FFFFFF) -#define MPI_FC_CT_SEND_DID_SHIFT (0) -#define MPI_FC_CT_SEND_MSGFLAGS_MASK (0xFF000000) -#define MPI_FC_CT_SEND_MSGFLAGS_SHIFT (24) - - -/* FC Common Transport Send Reply */ -typedef struct _MSG_FC_COMMON_TRANSPORT_SEND_REPLY -{ - U8 Reserved; /* 00h */ - U8 AliasIndex; /* 01h */ - U8 MsgLength; /* 02h */ - U8 Function; /* 03h */ - U16 Reserved1; /* 04h */ - U8 Reserved2; /* 06h */ - U8 MsgFlags; /* 07h */ - U32 MsgContext; /* 08h */ - U16 Reserved3; /* 0Ch */ - U16 IOCStatus; /* 0Eh */ - U32 IOCLogInfo; /* 10h */ - U32 ResponseLength; /* 14h */ -} MSG_FC_COMMON_TRANSPORT_SEND_REPLY, MPI_POINTER PTR_MSG_FC_COMMON_TRANSPORT_SEND_REPLY, - FcCommonTransportSendReply_t, MPI_POINTER pFcCommonTransportSendReply_t; - - -/****************************************************************************/ -/* FC Primitive Send messages */ -/****************************************************************************/ - -typedef struct _MSG_FC_PRIMITIVE_SEND_REQUEST -{ - U8 SendFlags; /* 00h */ - U8 Reserved; /* 01h */ - U8 ChainOffset; /* 02h */ - U8 Function; /* 03h */ - U16 Reserved1; /* 04h */ - U8 Reserved2; /* 06h */ - U8 MsgFlags; /* 07h */ - U32 MsgContext; /* 08h */ - U8 FcPrimitive[4]; /* 0Ch */ -} MSG_FC_PRIMITIVE_SEND_REQUEST, MPI_POINTER PTR_MSG_FC_PRIMITIVE_SEND_REQUEST, - FcPrimitiveSendRequest_t, MPI_POINTER pFcPrimitiveSendRequest_t; - -#define MPI_FC_PRIM_SEND_FLAGS_PORT_MASK (0x01) -#define MPI_FC_PRIM_SEND_FLAGS_ML_RESET_LINK (0x02) -#define MPI_FC_PRIM_SEND_FLAGS_RESET_LINK (0x04) -#define MPI_FC_PRIM_SEND_FLAGS_STOP_SEND (0x08) -#define MPI_FC_PRIM_SEND_FLAGS_SEND_ONCE (0x10) -#define MPI_FC_PRIM_SEND_FLAGS_SEND_AROUND (0x20) -#define MPI_FC_PRIM_SEND_FLAGS_UNTIL_FULL (0x40) -#define MPI_FC_PRIM_SEND_FLAGS_FOREVER (0x80) - -/* FC Primitive Send Reply */ -typedef struct _MSG_FC_PRIMITIVE_SEND_REPLY -{ - U8 SendFlags; /* 00h */ - U8 Reserved; /* 01h */ - U8 MsgLength; /* 02h */ - U8 Function; /* 03h */ - U16 Reserved1; /* 04h */ - U8 Reserved2; /* 06h */ - U8 MsgFlags; /* 07h */ - U32 MsgContext; /* 08h */ - U16 Reserved3; /* 0Ch */ - U16 IOCStatus; /* 0Eh */ - U32 IOCLogInfo; /* 10h */ -} MSG_FC_PRIMITIVE_SEND_REPLY, MPI_POINTER PTR_MSG_FC_PRIMITIVE_SEND_REPLY, - FcPrimitiveSendReply_t, MPI_POINTER pFcPrimitiveSendReply_t; - -#endif - -/* $FreeBSD: /repoman/r/ncvs/src/sys/dev/mpt/mpilib/mpi_init.h,v 1.6 2005/07/10 15:05:39 scottl Exp $ */ -/*- - * Copyright (c) 2000-2005, LSI Logic Corporation and its contributors. - * All rights reserved. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions are - * met: - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce at minimum a disclaimer - * substantially similar to the "NO WARRANTY" disclaimer below - * ("Disclaimer") and any redistribution must be conditioned upon including - * a substantially similar Disclaimer requirement for further binary - * redistribution. - * 3. Neither the name of the LSI Logic Corporation nor the names of its - * contributors may be used to endorse or promote products derived from - * this software without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" - * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE - * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE - * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR - * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF - * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS - * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN - * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) - * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF THE COPYRIGHT - * OWNER OR CONTRIBUTOR IS ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - * - * Name: MPI_INIT.H - * Title: MPI initiator mode messages and structures - * Creation Date: June 8, 2000 - * - * MPI_INIT.H Version: 01.02.07 - * - * Version History - * --------------- - * - * Date Version Description - * -------- -------- ------------------------------------------------------ - * 05-08-00 00.10.01 Original release for 0.10 spec dated 4/26/2000. - * 05-24-00 00.10.02 Added SenseBufferLength to _MSG_SCSI_IO_REPLY. - * 06-06-00 01.00.01 Update version number for 1.0 release. - * 06-08-00 01.00.02 Added MPI_SCSI_RSP_INFO_ definitions. - * 11-02-00 01.01.01 Original release for post 1.0 work. - * 12-04-00 01.01.02 Added MPI_SCSIIO_CONTROL_NO_DISCONNECT. - * 02-20-01 01.01.03 Started using MPI_POINTER. - * 03-27-01 01.01.04 Added structure offset comments. - * 04-10-01 01.01.05 Added new MsgFlag for MSG_SCSI_TASK_MGMT. - * 08-08-01 01.02.01 Original release for v1.2 work. - * 08-29-01 01.02.02 Added MPI_SCSITASKMGMT_TASKTYPE_LOGICAL_UNIT_RESET. - * Added MPI_SCSI_STATE_QUEUE_TAG_REJECTED for - * MSG_SCSI_IO_REPLY. - * 09-28-01 01.02.03 Added structures and defines for SCSI Enclosure - * Processor messages. - * 10-04-01 01.02.04 Added defines for SEP request Action field. - * 05-31-02 01.02.05 Added MPI_SCSIIO_MSGFLGS_CMD_DETERMINES_DATA_DIR define - * for SCSI IO requests. - * 11-15-02 01.02.06 Added special extended SCSI Status defines for FCP. - * 06-26-03 01.02.07 Added MPI_SCSI_STATUS_FCPEXT_UNASSIGNED define. - * -------------------------------------------------------------------------- - */ - -#ifndef MPI_INIT_H -#define MPI_INIT_H - - -/***************************************************************************** -* -* S C S I I n i t i a t o r M e s s a g e s -* -*****************************************************************************/ - -/****************************************************************************/ -/* SCSI IO messages and assocaited structures */ -/****************************************************************************/ - -typedef struct _MSG_SCSI_IO_REQUEST -{ - U8 TargetID; /* 00h */ - U8 Bus; /* 01h */ - U8 ChainOffset; /* 02h */ - U8 Function; /* 03h */ - U8 CDBLength; /* 04h */ - U8 SenseBufferLength; /* 05h */ - U8 Reserved; /* 06h */ - U8 MsgFlags; /* 07h */ - U32 MsgContext; /* 08h */ - U8 LUN[8]; /* 0Ch */ - U32 Control; /* 14h */ - U8 CDB[16]; /* 18h */ - U32 DataLength; /* 28h */ - U32 SenseBufferLowAddr; /* 2Ch */ - SGE_IO_UNION SGL; /* 30h */ -} MSG_SCSI_IO_REQUEST, MPI_POINTER PTR_MSG_SCSI_IO_REQUEST, - SCSIIORequest_t, MPI_POINTER pSCSIIORequest_t; - - -/* SCSI IO MsgFlags bits */ - -#define MPI_SCSIIO_MSGFLGS_SENSE_WIDTH (0x01) -#define MPI_SCSIIO_MSGFLGS_SENSE_WIDTH_32 (0x00) -#define MPI_SCSIIO_MSGFLGS_SENSE_WIDTH_64 (0x01) -#define MPI_SCSIIO_MSGFLGS_SENSE_LOCATION (0x02) -#define MPI_SCSIIO_MSGFLGS_SENSE_LOC_HOST (0x00) -#define MPI_SCSIIO_MSGFLGS_SENSE_LOC_IOC (0x02) -#define MPI_SCSIIO_MSGFLGS_CMD_DETERMINES_DATA_DIR (0x04) - -/* SCSI IO LUN fields */ - -#define MPI_SCSIIO_LUN_FIRST_LEVEL_ADDRESSING (0x0000FFFF) -#define MPI_SCSIIO_LUN_SECOND_LEVEL_ADDRESSING (0xFFFF0000) -#define MPI_SCSIIO_LUN_THIRD_LEVEL_ADDRESSING (0x0000FFFF) -#define MPI_SCSIIO_LUN_FOURTH_LEVEL_ADDRESSING (0xFFFF0000) -#define MPI_SCSIIO_LUN_LEVEL_1_WORD (0xFF00) -#define MPI_SCSIIO_LUN_LEVEL_1_DWORD (0x0000FF00) - -/* SCSI IO Control bits */ - -#define MPI_SCSIIO_CONTROL_DATADIRECTION_MASK (0x03000000) -#define MPI_SCSIIO_CONTROL_NODATATRANSFER (0x00000000) -#define MPI_SCSIIO_CONTROL_WRITE (0x01000000) -#define MPI_SCSIIO_CONTROL_READ (0x02000000) - -#define MPI_SCSIIO_CONTROL_ADDCDBLEN_MASK (0x3C000000) -#define MPI_SCSIIO_CONTROL_ADDCDBLEN_SHIFT (26) - -#define MPI_SCSIIO_CONTROL_TASKATTRIBUTE_MASK (0x00000700) -#define MPI_SCSIIO_CONTROL_SIMPLEQ (0x00000000) -#define MPI_SCSIIO_CONTROL_HEADOFQ (0x00000100) -#define MPI_SCSIIO_CONTROL_ORDEREDQ (0x00000200) -#define MPI_SCSIIO_CONTROL_ACAQ (0x00000400) -#define MPI_SCSIIO_CONTROL_UNTAGGED (0x00000500) -#define MPI_SCSIIO_CONTROL_NO_DISCONNECT (0x00000700) - -#define MPI_SCSIIO_CONTROL_TASKMANAGE_MASK (0x00FF0000) -#define MPI_SCSIIO_CONTROL_OBSOLETE (0x00800000) -#define MPI_SCSIIO_CONTROL_CLEAR_ACA_RSV (0x00400000) -#define MPI_SCSIIO_CONTROL_TARGET_RESET (0x00200000) -#define MPI_SCSIIO_CONTROL_LUN_RESET_RSV (0x00100000) -#define MPI_SCSIIO_CONTROL_RESERVED (0x00080000) -#define MPI_SCSIIO_CONTROL_CLR_TASK_SET_RSV (0x00040000) -#define MPI_SCSIIO_CONTROL_ABORT_TASK_SET (0x00020000) -#define MPI_SCSIIO_CONTROL_RESERVED2 (0x00010000) - - -/* SCSI IO reply structure */ -typedef struct _MSG_SCSI_IO_REPLY -{ - U8 TargetID; /* 00h */ - U8 Bus; /* 01h */ - U8 MsgLength; /* 02h */ - U8 Function; /* 03h */ - U8 CDBLength; /* 04h */ - U8 SenseBufferLength; /* 05h */ - U8 Reserved; /* 06h */ - U8 MsgFlags; /* 07h */ - U32 MsgContext; /* 08h */ - U8 SCSIStatus; /* 0Ch */ - U8 SCSIState; /* 0Dh */ - U16 IOCStatus; /* 0Eh */ - U32 IOCLogInfo; /* 10h */ - U32 TransferCount; /* 14h */ - U32 SenseCount; /* 18h */ - U32 ResponseInfo; /* 1Ch */ -} MSG_SCSI_IO_REPLY, MPI_POINTER PTR_MSG_SCSI_IO_REPLY, - SCSIIOReply_t, MPI_POINTER pSCSIIOReply_t; - - -/* SCSI IO Reply SCSIStatus values (SAM-2 status codes) */ - -#define MPI_SCSI_STATUS_SUCCESS (0x00) -#define MPI_SCSI_STATUS_CHECK_CONDITION (0x02) -#define MPI_SCSI_STATUS_CONDITION_MET (0x04) -#define MPI_SCSI_STATUS_BUSY (0x08) -#define MPI_SCSI_STATUS_INTERMEDIATE (0x10) -#define MPI_SCSI_STATUS_INTERMEDIATE_CONDMET (0x14) -#define MPI_SCSI_STATUS_RESERVATION_CONFLICT (0x18) -#define MPI_SCSI_STATUS_COMMAND_TERMINATED (0x22) -#define MPI_SCSI_STATUS_TASK_SET_FULL (0x28) -#define MPI_SCSI_STATUS_ACA_ACTIVE (0x30) - -#define MPI_SCSI_STATUS_FCPEXT_DEVICE_LOGGED_OUT (0x80) -#define MPI_SCSI_STATUS_FCPEXT_NO_LINK (0x81) -#define MPI_SCSI_STATUS_FCPEXT_UNASSIGNED (0x82) - - -/* SCSI IO Reply SCSIState values */ - -#define MPI_SCSI_STATE_AUTOSENSE_VALID (0x01) -#define MPI_SCSI_STATE_AUTOSENSE_FAILED (0x02) -#define MPI_SCSI_STATE_NO_SCSI_STATUS (0x04) -#define MPI_SCSI_STATE_TERMINATED (0x08) -#define MPI_SCSI_STATE_RESPONSE_INFO_VALID (0x10) -#define MPI_SCSI_STATE_QUEUE_TAG_REJECTED (0x20) - -/* SCSI IO Reply ResponseInfo values */ -/* (FCP-1 RSP_CODE values and SPI-3 Packetized Failure codes) */ - -#define MPI_SCSI_RSP_INFO_FUNCTION_COMPLETE (0x00000000) -#define MPI_SCSI_RSP_INFO_FCP_BURST_LEN_ERROR (0x01000000) -#define MPI_SCSI_RSP_INFO_CMND_FIELDS_INVALID (0x02000000) -#define MPI_SCSI_RSP_INFO_FCP_DATA_RO_ERROR (0x03000000) -#define MPI_SCSI_RSP_INFO_TASK_MGMT_UNSUPPORTED (0x04000000) -#define MPI_SCSI_RSP_INFO_TASK_MGMT_FAILED (0x05000000) -#define MPI_SCSI_RSP_INFO_SPI_LQ_INVALID_TYPE (0x06000000) - - -/****************************************************************************/ -/* SCSI Task Management messages */ -/****************************************************************************/ - -typedef struct _MSG_SCSI_TASK_MGMT -{ - U8 TargetID; /* 00h */ - U8 Bus; /* 01h */ - U8 ChainOffset; /* 02h */ - U8 Function; /* 03h */ - U8 Reserved; /* 04h */ - U8 TaskType; /* 05h */ - U8 Reserved1; /* 06h */ - U8 MsgFlags; /* 07h */ - U32 MsgContext; /* 08h */ - U8 LUN[8]; /* 0Ch */ - U32 Reserved2[7]; /* 14h */ - U32 TaskMsgContext; /* 30h */ -} MSG_SCSI_TASK_MGMT, MPI_POINTER PTR_SCSI_TASK_MGMT, - SCSITaskMgmt_t, MPI_POINTER pSCSITaskMgmt_t; - -/* TaskType values */ - -#define MPI_SCSITASKMGMT_TASKTYPE_ABORT_TASK (0x01) -#define MPI_SCSITASKMGMT_TASKTYPE_ABRT_TASK_SET (0x02) -#define MPI_SCSITASKMGMT_TASKTYPE_TARGET_RESET (0x03) -#define MPI_SCSITASKMGMT_TASKTYPE_RESET_BUS (0x04) -#define MPI_SCSITASKMGMT_TASKTYPE_LOGICAL_UNIT_RESET (0x05) - -/* MsgFlags bits */ -#define MPI_SCSITASKMGMT_MSGFLAGS_TARGET_RESET_OPTION (0x00) -#define MPI_SCSITASKMGMT_MSGFLAGS_LIP_RESET_OPTION (0x02) -#define MPI_SCSITASKMGMT_MSGFLAGS_LIPRESET_RESET_OPTION (0x04) - -/* SCSI Task Management Reply */ -typedef struct _MSG_SCSI_TASK_MGMT_REPLY -{ - U8 TargetID; /* 00h */ - U8 Bus; /* 01h */ - U8 MsgLength; /* 02h */ - U8 Function; /* 03h */ - U8 Reserved; /* 04h */ - U8 TaskType; /* 05h */ - U8 Reserved1; /* 06h */ - U8 MsgFlags; /* 07h */ - U32 MsgContext; /* 08h */ - U8 Reserved2[2]; /* 0Ch */ - U16 IOCStatus; /* 0Eh */ - U32 IOCLogInfo; /* 10h */ - U32 TerminationCount; /* 14h */ -} MSG_SCSI_TASK_MGMT_REPLY, MPI_POINTER PTR_MSG_SCSI_TASK_MGMT_REPLY, - SCSITaskMgmtReply_t, MPI_POINTER pSCSITaskMgmtReply_t; - - -/****************************************************************************/ -/* SCSI Enclosure Processor messages */ -/****************************************************************************/ - -typedef struct _MSG_SEP_REQUEST -{ - U8 TargetID; /* 00h */ - U8 Bus; /* 01h */ - U8 ChainOffset; /* 02h */ - U8 Function; /* 03h */ - U8 Action; /* 04h */ - U8 Reserved1; /* 05h */ - U8 Reserved2; /* 06h */ - U8 MsgFlags; /* 07h */ - U32 MsgContext; /* 08h */ - U32 SlotStatus; /* 0Ch */ -} MSG_SEP_REQUEST, MPI_POINTER PTR_MSG_SEP_REQUEST, - SEPRequest_t, MPI_POINTER pSEPRequest_t; - -/* Action defines */ -#define MPI_SEP_REQ_ACTION_WRITE_STATUS (0x00) -#define MPI_SEP_REQ_ACTION_READ_STATUS (0x01) - -/* SlotStatus bits for MSG_SEP_REQUEST */ -#define MPI_SEP_REQ_SLOTSTATUS_NO_ERROR (0x00000001) -#define MPI_SEP_REQ_SLOTSTATUS_DEV_FAULTY (0x00000002) -#define MPI_SEP_REQ_SLOTSTATUS_DEV_REBUILDING (0x00000004) -#define MPI_SEP_REQ_SLOTSTATUS_IN_FAILED_ARRAY (0x00000008) -#define MPI_SEP_REQ_SLOTSTATUS_IN_CRITICAL_ARRAY (0x00000010) -#define MPI_SEP_REQ_SLOTSTATUS_PARITY_CHECK (0x00000020) -#define MPI_SEP_REQ_SLOTSTATUS_PREDICTED_FAULT (0x00000040) -#define MPI_SEP_REQ_SLOTSTATUS_UNCONFIGURED (0x00000080) -#define MPI_SEP_REQ_SLOTSTATUS_HOT_SPARE (0x00000100) -#define MPI_SEP_REQ_SLOTSTATUS_REBUILD_STOPPED (0x00000200) -#define MPI_SEP_REQ_SLOTSTATUS_IDENTIFY_REQUEST (0x00020000) -#define MPI_SEP_REQ_SLOTSTATUS_REQUEST_REMOVE (0x00040000) -#define MPI_SEP_REQ_SLOTSTATUS_REQUEST_INSERT (0x00080000) -#define MPI_SEP_REQ_SLOTSTATUS_DO_NOT_MOVE (0x00400000) -#define MPI_SEP_REQ_SLOTSTATUS_B_ENABLE_BYPASS (0x04000000) -#define MPI_SEP_REQ_SLOTSTATUS_A_ENABLE_BYPASS (0x08000000) -#define MPI_SEP_REQ_SLOTSTATUS_DEV_OFF (0x10000000) -#define MPI_SEP_REQ_SLOTSTATUS_SWAP_RESET (0x80000000) - - -typedef struct _MSG_SEP_REPLY -{ - U8 TargetID; /* 00h */ - U8 Bus; /* 01h */ - U8 MsgLength; /* 02h */ - U8 Function; /* 03h */ - U8 Action; /* 04h */ - U8 Reserved1; /* 05h */ - U8 Reserved2; /* 06h */ - U8 MsgFlags; /* 07h */ - U32 MsgContext; /* 08h */ - U16 Reserved3; /* 0Ch */ - U16 IOCStatus; /* 0Eh */ - U32 IOCLogInfo; /* 10h */ - U32 SlotStatus; /* 14h */ -} MSG_SEP_REPLY, MPI_POINTER PTR_MSG_SEP_REPLY, - SEPReply_t, MPI_POINTER pSEPReply_t; - -/* SlotStatus bits for MSG_SEP_REPLY */ -#define MPI_SEP_REPLY_SLOTSTATUS_NO_ERROR (0x00000001) -#define MPI_SEP_REPLY_SLOTSTATUS_DEV_FAULTY (0x00000002) -#define MPI_SEP_REPLY_SLOTSTATUS_DEV_REBUILDING (0x00000004) -#define MPI_SEP_REPLY_SLOTSTATUS_IN_FAILED_ARRAY (0x00000008) -#define MPI_SEP_REPLY_SLOTSTATUS_IN_CRITICAL_ARRAY (0x00000010) -#define MPI_SEP_REPLY_SLOTSTATUS_PARITY_CHECK (0x00000020) -#define MPI_SEP_REPLY_SLOTSTATUS_PREDICTED_FAULT (0x00000040) -#define MPI_SEP_REPLY_SLOTSTATUS_UNCONFIGURED (0x00000080) -#define MPI_SEP_REPLY_SLOTSTATUS_HOT_SPARE (0x00000100) -#define MPI_SEP_REPLY_SLOTSTATUS_REBUILD_STOPPED (0x00000200) -#define MPI_SEP_REPLY_SLOTSTATUS_REPORT (0x00010000) -#define MPI_SEP_REPLY_SLOTSTATUS_IDENTIFY_REQUEST (0x00020000) -#define MPI_SEP_REPLY_SLOTSTATUS_REMOVE_READY (0x00040000) -#define MPI_SEP_REPLY_SLOTSTATUS_INSERT_READY (0x00080000) -#define MPI_SEP_REPLY_SLOTSTATUS_DO_NOT_REMOVE (0x00400000) -#define MPI_SEP_REPLY_SLOTSTATUS_B_BYPASS_ENABLED (0x01000000) -#define MPI_SEP_REPLY_SLOTSTATUS_A_BYPASS_ENABLED (0x02000000) -#define MPI_SEP_REPLY_SLOTSTATUS_B_ENABLE_BYPASS (0x04000000) -#define MPI_SEP_REPLY_SLOTSTATUS_A_ENABLE_BYPASS (0x08000000) -#define MPI_SEP_REPLY_SLOTSTATUS_DEV_OFF (0x10000000) -#define MPI_SEP_REPLY_SLOTSTATUS_FAULT_SENSED (0x40000000) -#define MPI_SEP_REPLY_SLOTSTATUS_SWAPPED (0x80000000) - -#endif -/* $FreeBSD: /repoman/r/ncvs/src/sys/dev/mpt/mpilib/mpi_ioc.h,v 1.6 2005/07/10 15:05:39 scottl Exp $ */ -/*- - * Copyright (c) 2000-2005, LSI Logic Corporation and its contributors. - * All rights reserved. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions are - * met: - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce at minimum a disclaimer - * substantially similar to the "NO WARRANTY" disclaimer below - * ("Disclaimer") and any redistribution must be conditioned upon including - * a substantially similar Disclaimer requirement for further binary - * redistribution. - * 3. Neither the name of the LSI Logic Corporation nor the names of its - * contributors may be used to endorse or promote products derived from - * this software without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" - * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE - * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE - * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR - * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF - * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS - * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN - * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) - * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF THE COPYRIGHT - * OWNER OR CONTRIBUTOR IS ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - * - * Name: MPI_IOC.H - * Title: MPI IOC, Port, Event, FW Download, and FW Upload messages - * Creation Date: August 11, 2000 - * - * MPI_IOC.H Version: 01.02.08 - * - * Version History - * --------------- - * - * Date Version Description - * -------- -------- ------------------------------------------------------ - * 05-08-00 00.10.01 Original release for 0.10 spec dated 4/26/2000. - * 05-24-00 00.10.02 Added _MSG_IOC_INIT_REPLY structure. - * 06-06-00 01.00.01 Added CurReplyFrameSize field to _MSG_IOC_FACTS_REPLY. - * 06-12-00 01.00.02 Added _MSG_PORT_ENABLE_REPLY structure. - * Added _MSG_EVENT_ACK_REPLY structure. - * Added _MSG_FW_DOWNLOAD_REPLY structure. - * Added _MSG_TOOLBOX_REPLY structure. - * 06-30-00 01.00.03 Added MaxLanBuckets to _PORT_FACT_REPLY structure. - * 07-27-00 01.00.04 Added _EVENT_DATA structure definitions for _SCSI, - * _LINK_STATUS, _LOOP_STATE and _LOGOUT. - * 08-11-00 01.00.05 Switched positions of MsgLength and Function fields in - * _MSG_EVENT_ACK_REPLY structure to match specification. - * 11-02-00 01.01.01 Original release for post 1.0 work. - * Added a value for Manufacturer to WhoInit. - * 12-04-00 01.01.02 Modified IOCFacts reply, added FWUpload messages, and - * removed toolbox message. - * 01-09-01 01.01.03 Added event enabled and disabled defines. - * Added structures for FwHeader and DataHeader. - * Added ImageType to FwUpload reply. - * 02-20-01 01.01.04 Started using MPI_POINTER. - * 02-27-01 01.01.05 Added event for RAID status change and its event data. - * Added IocNumber field to MSG_IOC_FACTS_REPLY. - * 03-27-01 01.01.06 Added defines for ProductId field of MPI_FW_HEADER. - * Added structure offset comments. - * 04-09-01 01.01.07 Added structure EVENT_DATA_EVENT_CHANGE. - * 08-08-01 01.02.01 Original release for v1.2 work. - * New format for FWVersion and ProductId in - * MSG_IOC_FACTS_REPLY and MPI_FW_HEADER. - * 08-31-01 01.02.02 Addded event MPI_EVENT_SCSI_DEVICE_STATUS_CHANGE and - * related structure and defines. - * Added event MPI_EVENT_ON_BUS_TIMER_EXPIRED. - * Added MPI_IOCINIT_FLAGS_DISCARD_FW_IMAGE. - * Replaced a reserved field in MSG_IOC_FACTS_REPLY with - * IOCExceptions and changed DataImageSize to reserved. - * Added MPI_FW_DOWNLOAD_ITYPE_NVSTORE_DATA and - * MPI_FW_UPLOAD_ITYPE_NVDATA. - * 09-28-01 01.02.03 Modified Event Data for Integrated RAID. - * 11-01-01 01.02.04 Added defines for MPI_EXT_IMAGE_HEADER ImageType field. - * 03-14-02 01.02.05 Added HeaderVersion field to MSG_IOC_FACTS_REPLY. - * 05-31-02 01.02.06 Added define for - * MPI_IOCFACTS_EXCEPT_RAID_CONFIG_INVALID. - * Added AliasIndex to EVENT_DATA_LOGOUT structure. - * 04-01-03 01.02.07 Added defines for MPI_FW_HEADER_SIGNATURE_. - * 06-26-03 01.02.08 Added new values to the product family defines. - * -------------------------------------------------------------------------- - */ - -#ifndef MPI_IOC_H -#define MPI_IOC_H - - -/***************************************************************************** -* -* I O C M e s s a g e s -* -*****************************************************************************/ - -/****************************************************************************/ -/* IOCInit message */ -/****************************************************************************/ - -typedef struct _MSG_IOC_INIT -{ - U8 WhoInit; /* 00h */ - U8 Reserved; /* 01h */ - U8 ChainOffset; /* 02h */ - U8 Function; /* 03h */ - U8 Flags; /* 04h */ - U8 MaxDevices; /* 05h */ - U8 MaxBuses; /* 06h */ - U8 MsgFlags; /* 07h */ - U32 MsgContext; /* 08h */ - U16 ReplyFrameSize; /* 0Ch */ - U8 Reserved1[2]; /* 0Eh */ - U32 HostMfaHighAddr; /* 10h */ - U32 SenseBufferHighAddr; /* 14h */ -} MSG_IOC_INIT, MPI_POINTER PTR_MSG_IOC_INIT, - IOCInit_t, MPI_POINTER pIOCInit_t; - -/* WhoInit values */ -#define MPI_WHOINIT_NO_ONE (0x00) -#define MPI_WHOINIT_SYSTEM_BIOS (0x01) -#define MPI_WHOINIT_ROM_BIOS (0x02) -#define MPI_WHOINIT_PCI_PEER (0x03) -#define MPI_WHOINIT_HOST_DRIVER (0x04) -#define MPI_WHOINIT_MANUFACTURER (0x05) - -/* Flags values */ -#define MPI_IOCINIT_FLAGS_DISCARD_FW_IMAGE (0x01) - -typedef struct _MSG_IOC_INIT_REPLY -{ - U8 WhoInit; /* 00h */ - U8 Reserved; /* 01h */ - U8 MsgLength; /* 02h */ - U8 Function; /* 03h */ - U8 Flags; /* 04h */ - U8 MaxDevices; /* 05h */ - U8 MaxBuses; /* 06h */ - U8 MsgFlags; /* 07h */ - U32 MsgContext; /* 08h */ - U16 Reserved2; /* 0Ch */ - U16 IOCStatus; /* 0Eh */ - U32 IOCLogInfo; /* 10h */ -} MSG_IOC_INIT_REPLY, MPI_POINTER PTR_MSG_IOC_INIT_REPLY, - IOCInitReply_t, MPI_POINTER pIOCInitReply_t; - - - -/****************************************************************************/ -/* IOC Facts message */ -/****************************************************************************/ - -typedef struct _MSG_IOC_FACTS -{ - U8 Reserved[2]; /* 00h */ - U8 ChainOffset; /* 01h */ - U8 Function; /* 02h */ - U8 Reserved1[3]; /* 03h */ - U8 MsgFlags; /* 04h */ - U32 MsgContext; /* 08h */ -} MSG_IOC_FACTS, MPI_POINTER PTR_IOC_FACTS, - IOCFacts_t, MPI_POINTER pIOCFacts_t; - -typedef struct _MPI_FW_VERSION_STRUCT -{ - U8 Dev; /* 00h */ - U8 Unit; /* 01h */ - U8 Minor; /* 02h */ - U8 Major; /* 03h */ -} MPI_FW_VERSION_STRUCT; - -typedef union _MPI_FW_VERSION -{ - MPI_FW_VERSION_STRUCT Struct; - U32 Word; -} MPI_FW_VERSION; - -/* IOC Facts Reply */ -typedef struct _MSG_IOC_FACTS_REPLY -{ - U16 MsgVersion; /* 00h */ - U8 MsgLength; /* 02h */ - U8 Function; /* 03h */ - U16 HeaderVersion; /* 04h */ - U8 IOCNumber; /* 06h */ - U8 MsgFlags; /* 07h */ - U32 MsgContext; /* 08h */ - U16 IOCExceptions; /* 0Ch */ - U16 IOCStatus; /* 0Eh */ - U32 IOCLogInfo; /* 10h */ - U8 MaxChainDepth; /* 14h */ - U8 WhoInit; /* 15h */ - U8 BlockSize; /* 16h */ - U8 Flags; /* 17h */ - U16 ReplyQueueDepth; /* 18h */ - U16 RequestFrameSize; /* 1Ah */ - U16 Reserved_0101_FWVersion; /* 1Ch */ /* obsolete 16-bit FWVersion */ - U16 ProductID; /* 1Eh */ - U32 CurrentHostMfaHighAddr; /* 20h */ - U16 GlobalCredits; /* 24h */ - U8 NumberOfPorts; /* 26h */ - U8 EventState; /* 27h */ - U32 CurrentSenseBufferHighAddr; /* 28h */ - U16 CurReplyFrameSize; /* 2Ch */ - U8 MaxDevices; /* 2Eh */ - U8 MaxBuses; /* 2Fh */ - U32 FWImageSize; /* 30h */ - U32 Reserved4; /* 34h */ - MPI_FW_VERSION FWVersion; /* 38h */ -} MSG_IOC_FACTS_REPLY, MPI_POINTER PTR_MSG_IOC_FACTS_REPLY, - IOCFactsReply_t, MPI_POINTER pIOCFactsReply_t; - -#define MPI_IOCFACTS_MSGVERSION_MAJOR_MASK (0xFF00) -#define MPI_IOCFACTS_MSGVERSION_MINOR_MASK (0x00FF) - -#define MPI_IOCFACTS_HEADERVERSION_UNIT_MASK (0xFF00) -#define MPI_IOCFACTS_HEADERVERSION_DEV_MASK (0x00FF) - -#define MPI_IOCFACTS_EXCEPT_CONFIG_CHECKSUM_FAIL (0x0001) -#define MPI_IOCFACTS_EXCEPT_RAID_CONFIG_INVALID (0x0002) - -#define MPI_IOCFACTS_FLAGS_FW_DOWNLOAD_BOOT (0x01) - -#define MPI_IOCFACTS_EVENTSTATE_DISABLED (0x00) -#define MPI_IOCFACTS_EVENTSTATE_ENABLED (0x01) - - - -/***************************************************************************** -* -* P o r t M e s s a g e s -* -*****************************************************************************/ - -/****************************************************************************/ -/* Port Facts message and Reply */ -/****************************************************************************/ - -typedef struct _MSG_PORT_FACTS -{ - U8 Reserved[2]; /* 00h */ - U8 ChainOffset; /* 02h */ - U8 Function; /* 03h */ - U8 Reserved1[2]; /* 04h */ - U8 PortNumber; /* 06h */ - U8 MsgFlags; /* 07h */ - U32 MsgContext; /* 08h */ -} MSG_PORT_FACTS, MPI_POINTER PTR_MSG_PORT_FACTS, - PortFacts_t, MPI_POINTER pPortFacts_t; - -typedef struct _MSG_PORT_FACTS_REPLY -{ - U16 Reserved; /* 00h */ - U8 MsgLength; /* 02h */ - U8 Function; /* 03h */ - U16 Reserved1; /* 04h */ - U8 PortNumber; /* 06h */ - U8 MsgFlags; /* 07h */ - U32 MsgContext; /* 08h */ - U16 Reserved2; /* 0Ch */ - U16 IOCStatus; /* 0Eh */ - U32 IOCLogInfo; /* 10h */ - U8 Reserved3; /* 14h */ - U8 PortType; /* 15h */ - U16 MaxDevices; /* 16h */ - U16 PortSCSIID; /* 18h */ - U16 ProtocolFlags; /* 1Ah */ - U16 MaxPostedCmdBuffers; /* 1Ch */ - U16 MaxPersistentIDs; /* 1Eh */ - U16 MaxLanBuckets; /* 20h */ - U16 Reserved4; /* 22h */ - U32 Reserved5; /* 24h */ -} MSG_PORT_FACTS_REPLY, MPI_POINTER PTR_MSG_PORT_FACTS_REPLY, - PortFactsReply_t, MPI_POINTER pPortFactsReply_t; - - -/* PortTypes values */ - -#define MPI_PORTFACTS_PORTTYPE_INACTIVE (0x00) -#define MPI_PORTFACTS_PORTTYPE_SCSI (0x01) -#define MPI_PORTFACTS_PORTTYPE_FC (0x10) - -/* ProtocolFlags values */ - -#define MPI_PORTFACTS_PROTOCOL_LOGBUSADDR (0x01) -#define MPI_PORTFACTS_PROTOCOL_LAN (0x02) -#define MPI_PORTFACTS_PROTOCOL_TARGET (0x04) -#define MPI_PORTFACTS_PROTOCOL_INITIATOR (0x08) - - -/****************************************************************************/ -/* Port Enable Message */ -/****************************************************************************/ - -typedef struct _MSG_PORT_ENABLE -{ - U8 Reserved[2]; /* 00h */ - U8 ChainOffset; /* 02h */ - U8 Function; /* 03h */ - U8 Reserved1[2]; /* 04h */ - U8 PortNumber; /* 06h */ - U8 MsgFlags; /* 07h */ - U32 MsgContext; /* 08h */ -} MSG_PORT_ENABLE, MPI_POINTER PTR_MSG_PORT_ENABLE, - PortEnable_t, MPI_POINTER pPortEnable_t; - -typedef struct _MSG_PORT_ENABLE_REPLY -{ - U8 Reserved[2]; /* 00h */ - U8 MsgLength; /* 02h */ - U8 Function; /* 03h */ - U8 Reserved1[2]; /* 04h */ - U8 PortNumber; /* 05h */ - U8 MsgFlags; /* 07h */ - U32 MsgContext; /* 08h */ - U16 Reserved2; /* 0Ch */ - U16 IOCStatus; /* 0Eh */ - U32 IOCLogInfo; /* 10h */ -} MSG_PORT_ENABLE_REPLY, MPI_POINTER PTR_MSG_PORT_ENABLE_REPLY, - PortEnableReply_t, MPI_POINTER pPortEnableReply_t; - - -/***************************************************************************** -* -* E v e n t M e s s a g e s -* -*****************************************************************************/ - -/****************************************************************************/ -/* Event Notification messages */ -/****************************************************************************/ - -typedef struct _MSG_EVENT_NOTIFY -{ - U8 Switch; /* 00h */ - U8 Reserved; /* 01h */ - U8 ChainOffset; /* 02h */ - U8 Function; /* 03h */ - U8 Reserved1[3]; /* 04h */ - U8 MsgFlags; /* 07h */ - U32 MsgContext; /* 08h */ -} MSG_EVENT_NOTIFY, MPI_POINTER PTR_MSG_EVENT_NOTIFY, - EventNotification_t, MPI_POINTER pEventNotification_t; - -/* Event Notification Reply */ - -typedef struct _MSG_EVENT_NOTIFY_REPLY -{ - U16 EventDataLength; /* 00h */ - U8 MsgLength; /* 02h */ - U8 Function; /* 03h */ - U8 Reserved1[2]; /* 04h */ - U8 AckRequired; /* 06h */ - U8 MsgFlags; /* 07h */ - U32 MsgContext; /* 08h */ - U8 Reserved2[2]; /* 0Ch */ - U16 IOCStatus; /* 0Eh */ - U32 IOCLogInfo; /* 10h */ - U32 Event; /* 14h */ - U32 EventContext; /* 18h */ - U32 Data[1]; /* 1Ch */ -} MSG_EVENT_NOTIFY_REPLY, MPI_POINTER PTR_MSG_EVENT_NOTIFY_REPLY, - EventNotificationReply_t, MPI_POINTER pEventNotificationReply_t; - -/* Event Acknowledge */ - -typedef struct _MSG_EVENT_ACK -{ - U8 Reserved[2]; /* 00h */ - U8 ChainOffset; /* 02h */ - U8 Function; /* 03h */ - U8 Reserved1[3]; /* 04h */ - U8 MsgFlags; /* 07h */ - U32 MsgContext; /* 08h */ - U32 Event; /* 0Ch */ - U32 EventContext; /* 10h */ -} MSG_EVENT_ACK, MPI_POINTER PTR_MSG_EVENT_ACK, - EventAck_t, MPI_POINTER pEventAck_t; - -typedef struct _MSG_EVENT_ACK_REPLY -{ - U8 Reserved[2]; /* 00h */ - U8 MsgLength; /* 02h */ - U8 Function; /* 03h */ - U8 Reserved1[3]; /* 04h */ - U8 MsgFlags; /* 07h */ - U32 MsgContext; /* 08h */ - U16 Reserved2; /* 0Ch */ - U16 IOCStatus; /* 0Eh */ - U32 IOCLogInfo; /* 10h */ -} MSG_EVENT_ACK_REPLY, MPI_POINTER PTR_MSG_EVENT_ACK_REPLY, - EventAckReply_t, MPI_POINTER pEventAckReply_t; - -/* Switch */ - -#define MPI_EVENT_NOTIFICATION_SWITCH_OFF (0x00) -#define MPI_EVENT_NOTIFICATION_SWITCH_ON (0x01) - -/* Event */ - -#define MPI_EVENT_NONE (0x00000000) -#define MPI_EVENT_LOG_DATA (0x00000001) -#define MPI_EVENT_STATE_CHANGE (0x00000002) -#define MPI_EVENT_UNIT_ATTENTION (0x00000003) -#define MPI_EVENT_IOC_BUS_RESET (0x00000004) -#define MPI_EVENT_EXT_BUS_RESET (0x00000005) -#define MPI_EVENT_RESCAN (0x00000006) -#define MPI_EVENT_LINK_STATUS_CHANGE (0x00000007) -#define MPI_EVENT_LOOP_STATE_CHANGE (0x00000008) -#define MPI_EVENT_LOGOUT (0x00000009) -#define MPI_EVENT_EVENT_CHANGE (0x0000000A) -#define MPI_EVENT_INTEGRATED_RAID (0x0000000B) -#define MPI_EVENT_SCSI_DEVICE_STATUS_CHANGE (0x0000000C) -#define MPI_EVENT_ON_BUS_TIMER_EXPIRED (0x0000000D) - -/* AckRequired field values */ - -#define MPI_EVENT_NOTIFICATION_ACK_NOT_REQUIRED (0x00) -#define MPI_EVENT_NOTIFICATION_ACK_REQUIRED (0x01) - -/* EventChange Event data */ - -typedef struct _EVENT_DATA_EVENT_CHANGE -{ - U8 EventState; /* 00h */ - U8 Reserved; /* 01h */ - U16 Reserved1; /* 02h */ -} EVENT_DATA_EVENT_CHANGE, MPI_POINTER PTR_EVENT_DATA_EVENT_CHANGE, - EventDataEventChange_t, MPI_POINTER pEventDataEventChange_t; - -/* SCSI Event data for Port, Bus and Device forms */ - -typedef struct _EVENT_DATA_SCSI -{ - U8 TargetID; /* 00h */ - U8 BusPort; /* 01h */ - U16 Reserved; /* 02h */ -} EVENT_DATA_SCSI, MPI_POINTER PTR_EVENT_DATA_SCSI, - EventDataScsi_t, MPI_POINTER pEventDataScsi_t; - -/* SCSI Device Status Change Event data */ - -typedef struct _EVENT_DATA_SCSI_DEVICE_STATUS_CHANGE -{ - U8 TargetID; /* 00h */ - U8 Bus; /* 01h */ - U8 ReasonCode; /* 02h */ - U8 LUN; /* 03h */ - U8 ASC; /* 04h */ - U8 ASCQ; /* 05h */ - U16 Reserved; /* 06h */ -} EVENT_DATA_SCSI_DEVICE_STATUS_CHANGE, - MPI_POINTER PTR_EVENT_DATA_SCSI_DEVICE_STATUS_CHANGE, - MpiEventDataScsiDeviceStatusChange_t, - MPI_POINTER pMpiEventDataScsiDeviceStatusChange_t; - -/* MPI SCSI Device Status Change Event data ReasonCode values */ -#define MPI_EVENT_SCSI_DEV_STAT_RC_ADDED (0x03) -#define MPI_EVENT_SCSI_DEV_STAT_RC_NOT_RESPONDING (0x04) -#define MPI_EVENT_SCSI_DEV_STAT_RC_SMART_DATA (0x05) - -/* MPI Link Status Change Event data */ - -typedef struct _EVENT_DATA_LINK_STATUS -{ - U8 State; /* 00h */ - U8 Reserved; /* 01h */ - U16 Reserved1; /* 02h */ - U8 Reserved2; /* 04h */ - U8 Port; /* 05h */ - U16 Reserved3; /* 06h */ -} EVENT_DATA_LINK_STATUS, MPI_POINTER PTR_EVENT_DATA_LINK_STATUS, - EventDataLinkStatus_t, MPI_POINTER pEventDataLinkStatus_t; - -#define MPI_EVENT_LINK_STATUS_FAILURE (0x00000000) -#define MPI_EVENT_LINK_STATUS_ACTIVE (0x00000001) - -/* MPI Loop State Change Event data */ - -typedef struct _EVENT_DATA_LOOP_STATE -{ - U8 Character4; /* 00h */ - U8 Character3; /* 01h */ - U8 Type; /* 02h */ - U8 Reserved; /* 03h */ - U8 Reserved1; /* 04h */ - U8 Port; /* 05h */ - U16 Reserved2; /* 06h */ -} EVENT_DATA_LOOP_STATE, MPI_POINTER PTR_EVENT_DATA_LOOP_STATE, - EventDataLoopState_t, MPI_POINTER pEventDataLoopState_t; - -#define MPI_EVENT_LOOP_STATE_CHANGE_LIP (0x0001) -#define MPI_EVENT_LOOP_STATE_CHANGE_LPE (0x0002) -#define MPI_EVENT_LOOP_STATE_CHANGE_LPB (0x0003) - -/* MPI LOGOUT Event data */ - -typedef struct _EVENT_DATA_LOGOUT -{ - U32 NPortID; /* 00h */ - U8 AliasIndex; /* 04h */ - U8 Port; /* 05h */ - U16 Reserved1; /* 06h */ -} EVENT_DATA_LOGOUT, MPI_POINTER PTR_EVENT_DATA_LOGOUT, - EventDataLogout_t, MPI_POINTER pEventDataLogout_t; - -#define MPI_EVENT_LOGOUT_ALL_ALIASES (0xFF) - - -/* MPI Integrated RAID Event data */ - -typedef struct _EVENT_DATA_RAID -{ - U8 VolumeID; /* 00h */ - U8 VolumeBus; /* 01h */ - U8 ReasonCode; /* 02h */ - U8 PhysDiskNum; /* 03h */ - U8 ASC; /* 04h */ - U8 ASCQ; /* 05h */ - U16 Reserved; /* 06h */ - U32 SettingsStatus; /* 08h */ -} EVENT_DATA_RAID, MPI_POINTER PTR_EVENT_DATA_RAID, - MpiEventDataRaid_t, MPI_POINTER pMpiEventDataRaid_t; - -/* MPI Integrated RAID Event data ReasonCode values */ -#define MPI_EVENT_RAID_RC_VOLUME_CREATED (0x00) -#define MPI_EVENT_RAID_RC_VOLUME_DELETED (0x01) -#define MPI_EVENT_RAID_RC_VOLUME_SETTINGS_CHANGED (0x02) -#define MPI_EVENT_RAID_RC_VOLUME_STATUS_CHANGED (0x03) -#define MPI_EVENT_RAID_RC_VOLUME_PHYSDISK_CHANGED (0x04) -#define MPI_EVENT_RAID_RC_PHYSDISK_CREATED (0x05) -#define MPI_EVENT_RAID_RC_PHYSDISK_DELETED (0x06) -#define MPI_EVENT_RAID_RC_PHYSDISK_SETTINGS_CHANGED (0x07) -#define MPI_EVENT_RAID_RC_PHYSDISK_STATUS_CHANGED (0x08) -#define MPI_EVENT_RAID_RC_DOMAIN_VAL_NEEDED (0x09) -#define MPI_EVENT_RAID_RC_SMART_DATA (0x0A) -#define MPI_EVENT_RAID_RC_REPLACE_ACTION_STARTED (0x0B) - - -/***************************************************************************** -* -* F i r m w a r e L o a d M e s s a g e s -* -*****************************************************************************/ - -/****************************************************************************/ -/* Firmware Download message and associated structures */ -/****************************************************************************/ - -typedef struct _MSG_FW_DOWNLOAD -{ - U8 ImageType; /* 00h */ - U8 Reserved; /* 01h */ - U8 ChainOffset; /* 02h */ - U8 Function; /* 03h */ - U8 Reserved1[3]; /* 04h */ - U8 MsgFlags; /* 07h */ - U32 MsgContext; /* 08h */ - SGE_MPI_UNION SGL; /* 0Ch */ -} MSG_FW_DOWNLOAD, MPI_POINTER PTR_MSG_FW_DOWNLOAD, - FWDownload_t, MPI_POINTER pFWDownload_t; - -#define MPI_FW_DOWNLOAD_ITYPE_RESERVED (0x00) -#define MPI_FW_DOWNLOAD_ITYPE_FW (0x01) -#define MPI_FW_DOWNLOAD_ITYPE_BIOS (0x02) -#define MPI_FW_DOWNLOAD_ITYPE_NVDATA (0x03) - - -typedef struct _FWDownloadTCSGE -{ - U8 Reserved; /* 00h */ - U8 ContextSize; /* 01h */ - U8 DetailsLength; /* 02h */ - U8 Flags; /* 03h */ - U32 Reserved_0100_Checksum; /* 04h */ /* obsolete Checksum */ - U32 ImageOffset; /* 08h */ - U32 ImageSize; /* 0Ch */ -} FW_DOWNLOAD_TCSGE, MPI_POINTER PTR_FW_DOWNLOAD_TCSGE, - FWDownloadTCSGE_t, MPI_POINTER pFWDownloadTCSGE_t; - -/* Firmware Download reply */ -typedef struct _MSG_FW_DOWNLOAD_REPLY -{ - U8 ImageType; /* 00h */ - U8 Reserved; /* 01h */ - U8 MsgLength; /* 02h */ - U8 Function; /* 03h */ - U8 Reserved1[3]; /* 04h */ - U8 MsgFlags; /* 07h */ - U32 MsgContext; /* 08h */ - U16 Reserved2; /* 0Ch */ - U16 IOCStatus; /* 0Eh */ - U32 IOCLogInfo; /* 10h */ -} MSG_FW_DOWNLOAD_REPLY, MPI_POINTER PTR_MSG_FW_DOWNLOAD_REPLY, - FWDownloadReply_t, MPI_POINTER pFWDownloadReply_t; - - -/****************************************************************************/ -/* Firmware Upload message and associated structures */ -/****************************************************************************/ - -typedef struct _MSG_FW_UPLOAD -{ - U8 ImageType; /* 00h */ - U8 Reserved; /* 01h */ - U8 ChainOffset; /* 02h */ - U8 Function; /* 03h */ - U8 Reserved1[3]; /* 04h */ - U8 MsgFlags; /* 07h */ - U32 MsgContext; /* 08h */ - SGE_MPI_UNION SGL; /* 0Ch */ -} MSG_FW_UPLOAD, MPI_POINTER PTR_MSG_FW_UPLOAD, - FWUpload_t, MPI_POINTER pFWUpload_t; - -#define MPI_FW_UPLOAD_ITYPE_FW_IOC_MEM (0x00) -#define MPI_FW_UPLOAD_ITYPE_FW_FLASH (0x01) -#define MPI_FW_UPLOAD_ITYPE_BIOS_FLASH (0x02) -#define MPI_FW_UPLOAD_ITYPE_NVDATA (0x03) - -typedef struct _FWUploadTCSGE -{ - U8 Reserved; /* 00h */ - U8 ContextSize; /* 01h */ - U8 DetailsLength; /* 02h */ - U8 Flags; /* 03h */ - U32 Reserved1; /* 04h */ - U32 ImageOffset; /* 08h */ - U32 ImageSize; /* 0Ch */ -} FW_UPLOAD_TCSGE, MPI_POINTER PTR_FW_UPLOAD_TCSGE, - FWUploadTCSGE_t, MPI_POINTER pFWUploadTCSGE_t; - -/* Firmware Upload reply */ -typedef struct _MSG_FW_UPLOAD_REPLY -{ - U8 ImageType; /* 00h */ - U8 Reserved; /* 01h */ - U8 MsgLength; /* 02h */ - U8 Function; /* 03h */ - U8 Reserved1[3]; /* 04h */ - U8 MsgFlags; /* 07h */ - U32 MsgContext; /* 08h */ - U16 Reserved2; /* 0Ch */ - U16 IOCStatus; /* 0Eh */ - U32 IOCLogInfo; /* 10h */ - U32 ActualImageSize; /* 14h */ -} MSG_FW_UPLOAD_REPLY, MPI_POINTER PTR_MSG_FW_UPLOAD_REPLY, - FWUploadReply_t, MPI_POINTER pFWUploadReply_t; - - -typedef struct _MPI_FW_HEADER -{ - U32 ArmBranchInstruction0; /* 00h */ - U32 Signature0; /* 04h */ - U32 Signature1; /* 08h */ - U32 Signature2; /* 0Ch */ - U32 ArmBranchInstruction1; /* 10h */ - U32 ArmBranchInstruction2; /* 14h */ - U32 Reserved; /* 18h */ - U32 Checksum; /* 1Ch */ - U16 VendorId; /* 20h */ - U16 ProductId; /* 22h */ - MPI_FW_VERSION FWVersion; /* 24h */ - U32 SeqCodeVersion; /* 28h */ - U32 ImageSize; /* 2Ch */ - U32 NextImageHeaderOffset; /* 30h */ - U32 LoadStartAddress; /* 34h */ - U32 IopResetVectorValue; /* 38h */ - U32 IopResetRegAddr; /* 3Ch */ - U32 VersionNameWhat; /* 40h */ - U8 VersionName[32]; /* 44h */ - U32 VendorNameWhat; /* 64h */ - U8 VendorName[32]; /* 68h */ -} MPI_FW_HEADER, MPI_POINTER PTR_MPI_FW_HEADER, - MpiFwHeader_t, MPI_POINTER pMpiFwHeader_t; - -#define MPI_FW_HEADER_WHAT_SIGNATURE (0x29232840) - -/* defines for using the ProductId field */ -#define MPI_FW_HEADER_PID_TYPE_MASK (0xF000) -#define MPI_FW_HEADER_PID_TYPE_SCSI (0x0000) -#define MPI_FW_HEADER_PID_TYPE_FC (0x1000) - -#define MPI_FW_HEADER_SIGNATURE_0 (0x5AEAA55A) -#define MPI_FW_HEADER_SIGNATURE_1 (0xA55AEAA5) -#define MPI_FW_HEADER_SIGNATURE_2 (0x5AA55AEA) - -#define MPI_FW_HEADER_PID_PROD_MASK (0x0F00) -#define MPI_FW_HEADER_PID_PROD_INITIATOR_SCSI (0x0100) -#define MPI_FW_HEADER_PID_PROD_TARGET_INITIATOR_SCSI (0x0200) -#define MPI_FW_HEADER_PID_PROD_TARGET_SCSI (0x0300) -#define MPI_FW_HEADER_PID_PROD_IM_SCSI (0x0400) -#define MPI_FW_HEADER_PID_PROD_IS_SCSI (0x0500) -#define MPI_FW_HEADER_PID_PROD_CTX_SCSI (0x0600) - -#define MPI_FW_HEADER_PID_FAMILY_MASK (0x00FF) -#define MPI_FW_HEADER_PID_FAMILY_1030A0_SCSI (0x0001) -#define MPI_FW_HEADER_PID_FAMILY_1030B0_SCSI (0x0002) -#define MPI_FW_HEADER_PID_FAMILY_1030B1_SCSI (0x0003) -#define MPI_FW_HEADER_PID_FAMILY_1030C0_SCSI (0x0004) -#define MPI_FW_HEADER_PID_FAMILY_1020A0_SCSI (0x0005) -#define MPI_FW_HEADER_PID_FAMILY_1020B0_SCSI (0x0006) -#define MPI_FW_HEADER_PID_FAMILY_1020B1_SCSI (0x0007) -#define MPI_FW_HEADER_PID_FAMILY_1020C0_SCSI (0x0008) -#define MPI_FW_HEADER_PID_FAMILY_1035A0_SCSI (0x0009) -#define MPI_FW_HEADER_PID_FAMILY_1035B0_SCSI (0x000A) -#define MPI_FW_HEADER_PID_FAMILY_1030TA0_SCSI (0x000B) -#define MPI_FW_HEADER_PID_FAMILY_1020TA0_SCSI (0x000C) -#define MPI_FW_HEADER_PID_FAMILY_909_FC (0x0000) -#define MPI_FW_HEADER_PID_FAMILY_919_FC (0x0001) -#define MPI_FW_HEADER_PID_FAMILY_919X_FC (0x0002) - -typedef struct _MPI_EXT_IMAGE_HEADER -{ - U8 ImageType; /* 00h */ - U8 Reserved; /* 01h */ - U16 Reserved1; /* 02h */ - U32 Checksum; /* 04h */ - U32 ImageSize; /* 08h */ - U32 NextImageHeaderOffset; /* 0Ch */ - U32 LoadStartAddress; /* 10h */ - U32 Reserved2; /* 14h */ -} MPI_EXT_IMAGE_HEADER, MPI_POINTER PTR_MPI_EXT_IMAGE_HEADER, - MpiExtImageHeader_t, MPI_POINTER pMpiExtImageHeader_t; - -/* defines for the ImageType field */ -#define MPI_EXT_IMAGE_TYPE_UNSPECIFIED (0x00) -#define MPI_EXT_IMAGE_TYPE_FW (0x01) -#define MPI_EXT_IMAGE_TYPE_NVDATA (0x03) - -#endif -/* $FreeBSD: /repoman/r/ncvs/src/sys/dev/mpt/mpilib/mpi_lan.h,v 1.5 2005/07/10 15:05:39 scottl Exp $ */ -/*- - * Copyright (c) 2000-2005, LSI Logic Corporation and its contributors. - * All rights reserved. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions are - * met: - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce at minimum a disclaimer - * substantially similar to the "NO WARRANTY" disclaimer below - * ("Disclaimer") and any redistribution must be conditioned upon including - * a substantially similar Disclaimer requirement for further binary - * redistribution. - * 3. Neither the name of the LSI Logic Corporation nor the names of its - * contributors may be used to endorse or promote products derived from - * this software without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" - * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE - * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE - * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR - * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF - * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS - * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN - * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) - * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF THE COPYRIGHT - * OWNER OR CONTRIBUTOR IS ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - * - * Name: MPI_LAN.H - * Title: MPI LAN messages and structures - * Creation Date: June 30, 2000 - * - * MPI_LAN.H Version: 01.02.01 - * - * Version History - * --------------- - * - * Date Version Description - * -------- -------- ------------------------------------------------------ - * 05-08-00 00.10.01 Original release for 0.10 spec dated 4/26/2000. - * 05-24-00 00.10.02 Added LANStatus field to _MSG_LAN_SEND_REPLY. - * Added LANStatus field to _MSG_LAN_RECEIVE_POST_REPLY. - * Moved ListCount field in _MSG_LAN_RECEIVE_POST_REPLY. - * 06-06-00 01.00.01 Update version number for 1.0 release. - * 06-12-00 01.00.02 Added MPI_ to BUCKETSTATUS_ definitions. - * 06-22-00 01.00.03 Major changes to match new LAN definition in 1.0 spec. - * 06-30-00 01.00.04 Added Context Reply definitions per revised proposal. - * Changed transaction context usage to bucket/buffer. - * 07-05-00 01.00.05 Removed LAN_RECEIVE_POST_BUCKET_CONTEXT_MASK definition - * to lan private header file - * 11-02-00 01.01.01 Original release for post 1.0 work - * 02-20-01 01.01.02 Started using MPI_POINTER. - * 03-27-01 01.01.03 Added structure offset comments. - * 08-08-01 01.02.01 Original release for v1.2 work. - * -------------------------------------------------------------------------- - */ - -#ifndef MPI_LAN_H -#define MPI_LAN_H - - -/****************************************************************************** -* -* L A N M e s s a g e s -* -*******************************************************************************/ - -/* LANSend messages */ - -typedef struct _MSG_LAN_SEND_REQUEST -{ - U16 Reserved; /* 00h */ - U8 ChainOffset; /* 02h */ - U8 Function; /* 03h */ - U16 Reserved2; /* 04h */ - U8 PortNumber; /* 06h */ - U8 MsgFlags; /* 07h */ - U32 MsgContext; /* 08h */ - SGE_MPI_UNION SG_List[1]; /* 0Ch */ -} MSG_LAN_SEND_REQUEST, MPI_POINTER PTR_MSG_LAN_SEND_REQUEST, - LANSendRequest_t, MPI_POINTER pLANSendRequest_t; - - -typedef struct _MSG_LAN_SEND_REPLY -{ - U16 Reserved; /* 00h */ - U8 MsgLength; /* 02h */ - U8 Function; /* 03h */ - U8 Reserved2; /* 04h */ - U8 NumberOfContexts; /* 05h */ - U8 PortNumber; /* 06h */ - U8 MsgFlags; /* 07h */ - U32 MsgContext; /* 08h */ - U16 Reserved3; /* 0Ch */ - U16 IOCStatus; /* 0Eh */ - U32 IOCLogInfo; /* 10h */ - U32 BufferContext; /* 14h */ -} MSG_LAN_SEND_REPLY, MPI_POINTER PTR_MSG_LAN_SEND_REPLY, - LANSendReply_t, MPI_POINTER pLANSendReply_t; - - -/* LANReceivePost */ - -typedef struct _MSG_LAN_RECEIVE_POST_REQUEST -{ - U16 Reserved; /* 00h */ - U8 ChainOffset; /* 02h */ - U8 Function; /* 03h */ - U16 Reserved2; /* 04h */ - U8 PortNumber; /* 06h */ - U8 MsgFlags; /* 07h */ - U32 MsgContext; /* 08h */ - U32 BucketCount; /* 0Ch */ - SGE_MPI_UNION SG_List[1]; /* 10h */ -} MSG_LAN_RECEIVE_POST_REQUEST, MPI_POINTER PTR_MSG_LAN_RECEIVE_POST_REQUEST, - LANReceivePostRequest_t, MPI_POINTER pLANReceivePostRequest_t; - - -typedef struct _MSG_LAN_RECEIVE_POST_REPLY -{ - U16 Reserved; /* 00h */ - U8 MsgLength; /* 02h */ - U8 Function; /* 03h */ - U8 Reserved2; /* 04h */ - U8 NumberOfContexts; /* 05h */ - U8 PortNumber; /* 06h */ - U8 MsgFlags; /* 07h */ - U32 MsgContext; /* 08h */ - U16 Reserved3; /* 0Ch */ - U16 IOCStatus; /* 0Eh */ - U32 IOCLogInfo; /* 10h */ - U32 BucketsRemaining; /* 14h */ - U32 PacketOffset; /* 18h */ - U32 PacketLength; /* 1Ch */ - U32 BucketContext[1]; /* 20h */ -} MSG_LAN_RECEIVE_POST_REPLY, MPI_POINTER PTR_MSG_LAN_RECEIVE_POST_REPLY, - LANReceivePostReply_t, MPI_POINTER pLANReceivePostReply_t; - - -/* LANReset */ - -typedef struct _MSG_LAN_RESET_REQUEST -{ - U16 Reserved; /* 00h */ - U8 ChainOffset; /* 02h */ - U8 Function; /* 03h */ - U16 Reserved2; /* 04h */ - U8 PortNumber; /* 05h */ - U8 MsgFlags; /* 07h */ - U32 MsgContext; /* 08h */ -} MSG_LAN_RESET_REQUEST, MPI_POINTER PTR_MSG_LAN_RESET_REQUEST, - LANResetRequest_t, MPI_POINTER pLANResetRequest_t; - - -typedef struct _MSG_LAN_RESET_REPLY -{ - U16 Reserved; /* 00h */ - U8 MsgLength; /* 02h */ - U8 Function; /* 03h */ - U16 Reserved2; /* 04h */ - U8 PortNumber; /* 06h */ - U8 MsgFlags; /* 07h */ - U32 MsgContext; /* 08h */ - U16 Reserved3; /* 0Ch */ - U16 IOCStatus; /* 0Eh */ - U32 IOCLogInfo; /* 10h */ -} MSG_LAN_RESET_REPLY, MPI_POINTER PTR_MSG_LAN_RESET_REPLY, - LANResetReply_t, MPI_POINTER pLANResetReply_t; - - -/****************************************************************************/ -/* LAN Context Reply defines and macros */ -/****************************************************************************/ - -#define LAN_REPLY_PACKET_LENGTH_MASK (0x0000FFFF) -#define LAN_REPLY_PACKET_LENGTH_SHIFT (0) -#define LAN_REPLY_BUCKET_CONTEXT_MASK (0x07FF0000) -#define LAN_REPLY_BUCKET_CONTEXT_SHIFT (16) -#define LAN_REPLY_BUFFER_CONTEXT_MASK (0x07FFFFFF) -#define LAN_REPLY_BUFFER_CONTEXT_SHIFT (0) -#define LAN_REPLY_FORM_MASK (0x18000000) -#define LAN_REPLY_FORM_RECEIVE_SINGLE (0x00) -#define LAN_REPLY_FORM_RECEIVE_MULTIPLE (0x01) -#define LAN_REPLY_FORM_SEND_SINGLE (0x02) -#define LAN_REPLY_FORM_MESSAGE_CONTEXT (0x03) -#define LAN_REPLY_FORM_SHIFT (27) - -#define GET_LAN_PACKET_LENGTH(x) (((x) & LAN_REPLY_PACKET_LENGTH_MASK) \ - >> LAN_REPLY_PACKET_LENGTH_SHIFT) - -#define SET_LAN_PACKET_LENGTH(x, lth) \ - ((x) = ((x) & ~LAN_REPLY_PACKET_LENGTH_MASK) | \ - (((lth) << LAN_REPLY_PACKET_LENGTH_SHIFT) & \ - LAN_REPLY_PACKET_LENGTH_MASK)) - -#define GET_LAN_BUCKET_CONTEXT(x) (((x) & LAN_REPLY_BUCKET_CONTEXT_MASK) \ - >> LAN_REPLY_BUCKET_CONTEXT_SHIFT) - -#define SET_LAN_BUCKET_CONTEXT(x, ctx) \ - ((x) = ((x) & ~LAN_REPLY_BUCKET_CONTEXT_MASK) | \ - (((ctx) << LAN_REPLY_BUCKET_CONTEXT_SHIFT) & \ - LAN_REPLY_BUCKET_CONTEXT_MASK)) - -#define GET_LAN_BUFFER_CONTEXT(x) (((x) & LAN_REPLY_BUFFER_CONTEXT_MASK) \ - >> LAN_REPLY_BUFFER_CONTEXT_SHIFT) - -#define SET_LAN_BUFFER_CONTEXT(x, ctx) \ - ((x) = ((x) & ~LAN_REPLY_BUFFER_CONTEXT_MASK) | \ - (((ctx) << LAN_REPLY_BUFFER_CONTEXT_SHIFT) & \ - LAN_REPLY_BUFFER_CONTEXT_MASK)) - -#define GET_LAN_FORM(x) (((x) & LAN_REPLY_FORM_MASK) \ - >> LAN_REPLY_FORM_SHIFT) - -#define SET_LAN_FORM(x, frm) \ - ((x) = ((x) & ~LAN_REPLY_FORM_MASK) | \ - (((frm) << LAN_REPLY_FORM_SHIFT) & \ - LAN_REPLY_FORM_MASK)) - - -/****************************************************************************/ -/* LAN Current Device State defines */ -/****************************************************************************/ - -#define MPI_LAN_DEVICE_STATE_RESET (0x00) -#define MPI_LAN_DEVICE_STATE_OPERATIONAL (0x01) - - -/****************************************************************************/ -/* LAN Loopback defines */ -/****************************************************************************/ - -#define MPI_LAN_TX_MODES_ENABLE_LOOPBACK_SUPPRESSION (0x01) - -#endif - -/* $FreeBSD: /repoman/r/ncvs/src/sys/dev/mpt/mpilib/mpi_raid.h,v 1.6 2005/07/10 15:05:39 scottl Exp $ */ -/*- - * Copyright (c) 2000-2005, LSI Logic Corporation and its contributors. - * All rights reserved. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions are - * met: - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce at minimum a disclaimer - * substantially similar to the "NO WARRANTY" disclaimer below - * ("Disclaimer") and any redistribution must be conditioned upon including - * a substantially similar Disclaimer requirement for further binary - * redistribution. - * 3. Neither the name of the LSI Logic Corporation nor the names of its - * contributors may be used to endorse or promote products derived from - * this software without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" - * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE - * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE - * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR - * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF - * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS - * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN - * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) - * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF THE COPYRIGHT - * OWNER OR CONTRIBUTOR IS ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - * - * Name: MPI_RAID.H - * Title: MPI RAID message and structures - * Creation Date: February 27, 2001 - * - * MPI_RAID.H Version: 01.02.09 - * - * Version History - * --------------- - * - * Date Version Description - * -------- -------- ------------------------------------------------------ - * 02-27-01 01.01.01 Original release for this file. - * 03-27-01 01.01.02 Added structure offset comments. - * 08-08-01 01.02.01 Original release for v1.2 work. - * 09-28-01 01.02.02 Major rework for MPI v1.2 Integrated RAID changes. - * 10-04-01 01.02.03 Added ActionData defines for - * MPI_RAID_ACTION_DELETE_VOLUME action. - * 11-01-01 01.02.04 Added define for MPI_RAID_ACTION_ADATA_DO_NOT_SYNC. - * 03-14-02 01.02.05 Added define for MPI_RAID_ACTION_ADATA_LOW_LEVEL_INIT. - * 05-07-02 01.02.06 Added define for MPI_RAID_ACTION_ACTIVATE_VOLUME, - * MPI_RAID_ACTION_INACTIVATE_VOLUME, and - * MPI_RAID_ACTION_ADATA_INACTIVATE_ALL. - * 07-12-02 01.02.07 Added structures for Mailbox request and reply. - * 11-15-02 01.02.08 Added missing MsgContext field to MSG_MAILBOX_REQUEST. - * 04-01-03 01.02.09 New action data option flag for - * MPI_RAID_ACTION_DELETE_VOLUME. - * -------------------------------------------------------------------------- - */ - -#ifndef MPI_RAID_H -#define MPI_RAID_H - - -/****************************************************************************** -* -* R A I D M e s s a g e s -* -*******************************************************************************/ - - -/****************************************************************************/ -/* RAID Volume Request */ -/****************************************************************************/ - -typedef struct _MSG_RAID_ACTION -{ - U8 Action; /* 00h */ - U8 Reserved1; /* 01h */ - U8 ChainOffset; /* 02h */ - U8 Function; /* 03h */ - U8 VolumeID; /* 04h */ - U8 VolumeBus; /* 05h */ - U8 PhysDiskNum; /* 06h */ - U8 MsgFlags; /* 07h */ - U32 MsgContext; /* 08h */ - U32 Reserved2; /* 0Ch */ - U32 ActionDataWord; /* 10h */ - SGE_SIMPLE_UNION ActionDataSGE; /* 14h */ -} MSG_RAID_ACTION_REQUEST, MPI_POINTER PTR_MSG_RAID_ACTION_REQUEST, - MpiRaidActionRequest_t , MPI_POINTER pMpiRaidActionRequest_t; - - -/* RAID Action request Action values */ - -#define MPI_RAID_ACTION_STATUS (0x00) -#define MPI_RAID_ACTION_INDICATOR_STRUCT (0x01) -#define MPI_RAID_ACTION_CREATE_VOLUME (0x02) -#define MPI_RAID_ACTION_DELETE_VOLUME (0x03) -#define MPI_RAID_ACTION_DISABLE_VOLUME (0x04) -#define MPI_RAID_ACTION_ENABLE_VOLUME (0x05) -#define MPI_RAID_ACTION_QUIESCE_PHYS_IO (0x06) -#define MPI_RAID_ACTION_ENABLE_PHYS_IO (0x07) -#define MPI_RAID_ACTION_CHANGE_VOLUME_SETTINGS (0x08) -#define MPI_RAID_ACTION_PHYSDISK_OFFLINE (0x0A) -#define MPI_RAID_ACTION_PHYSDISK_ONLINE (0x0B) -#define MPI_RAID_ACTION_CHANGE_PHYSDISK_SETTINGS (0x0C) -#define MPI_RAID_ACTION_CREATE_PHYSDISK (0x0D) -#define MPI_RAID_ACTION_DELETE_PHYSDISK (0x0E) -#define MPI_RAID_ACTION_FAIL_PHYSDISK (0x0F) -#define MPI_RAID_ACTION_REPLACE_PHYSDISK (0x10) -#define MPI_RAID_ACTION_ACTIVATE_VOLUME (0x11) -#define MPI_RAID_ACTION_INACTIVATE_VOLUME (0x12) -#define MPI_RAID_ACTION_SET_RESYNC_RATE (0x13) -#define MPI_RAID_ACTION_SET_DATA_SCRUB_RATE (0x14) - -/* ActionDataWord defines for use with MPI_RAID_ACTION_CREATE_VOLUME action */ -#define MPI_RAID_ACTION_ADATA_DO_NOT_SYNC (0x00000001) -#define MPI_RAID_ACTION_ADATA_LOW_LEVEL_INIT (0x00000002) - -/* ActionDataWord defines for use with MPI_RAID_ACTION_DELETE_VOLUME action */ -#define MPI_RAID_ACTION_ADATA_KEEP_PHYS_DISKS (0x00000000) -#define MPI_RAID_ACTION_ADATA_DEL_PHYS_DISKS (0x00000001) - -#define MPI_RAID_ACTION_ADATA_KEEP_LBA0 (0x00000000) -#define MPI_RAID_ACTION_ADATA_ZERO_LBA0 (0x00000002) - -/* ActionDataWord defines for use with MPI_RAID_ACTION_ACTIVATE_VOLUME action */ -#define MPI_RAID_ACTION_ADATA_INACTIVATE_ALL (0x00000001) - - -/* RAID Action reply message */ - -typedef struct _MSG_RAID_ACTION_REPLY -{ - U8 Action; /* 00h */ - U8 Reserved; /* 01h */ - U8 MsgLength; /* 02h */ - U8 Function; /* 03h */ - U8 VolumeID; /* 04h */ - U8 VolumeBus; /* 05h */ - U8 PhysDiskNum; /* 06h */ - U8 MsgFlags; /* 07h */ - U32 MsgContext; /* 08h */ - U16 ActionStatus; /* 0Ch */ - U16 IOCStatus; /* 0Eh */ - U32 IOCLogInfo; /* 10h */ - U32 VolumeStatus; /* 14h */ - U32 ActionData; /* 18h */ -} MSG_RAID_ACTION_REPLY, MPI_POINTER PTR_MSG_RAID_ACTION_REPLY, - MpiRaidActionReply_t, MPI_POINTER pMpiRaidActionReply_t; - - -/* RAID Volume reply ActionStatus values */ - -#define MPI_RAID_ACTION_ASTATUS_SUCCESS (0x0000) -#define MPI_RAID_ACTION_ASTATUS_INVALID_ACTION (0x0001) -#define MPI_RAID_ACTION_ASTATUS_FAILURE (0x0002) -#define MPI_RAID_ACTION_ASTATUS_IN_PROGRESS (0x0003) - - -/* RAID Volume reply RAID Volume Indicator structure */ - -typedef struct _MPI_RAID_VOL_INDICATOR -{ - U64 TotalBlocks; /* 00h */ - U64 BlocksRemaining; /* 08h */ -} MPI_RAID_VOL_INDICATOR, MPI_POINTER PTR_MPI_RAID_VOL_INDICATOR, - MpiRaidVolIndicator_t, MPI_POINTER pMpiRaidVolIndicator_t; - - -/****************************************************************************/ -/* SCSI IO RAID Passthrough Request */ -/****************************************************************************/ - -typedef struct _MSG_SCSI_IO_RAID_PT_REQUEST -{ - U8 PhysDiskNum; /* 00h */ - U8 Reserved1; /* 01h */ - U8 ChainOffset; /* 02h */ - U8 Function; /* 03h */ - U8 CDBLength; /* 04h */ - U8 SenseBufferLength; /* 05h */ - U8 Reserved2; /* 06h */ - U8 MsgFlags; /* 07h */ - U32 MsgContext; /* 08h */ - U8 LUN[8]; /* 0Ch */ - U32 Control; /* 14h */ - U8 CDB[16]; /* 18h */ - U32 DataLength; /* 28h */ - U32 SenseBufferLowAddr; /* 2Ch */ - SGE_IO_UNION SGL; /* 30h */ -} MSG_SCSI_IO_RAID_PT_REQUEST, MPI_POINTER PTR_MSG_SCSI_IO_RAID_PT_REQUEST, - SCSIIORaidPassthroughRequest_t, MPI_POINTER pSCSIIORaidPassthroughRequest_t; - - -/* SCSI IO RAID Passthrough reply structure */ - -typedef struct _MSG_SCSI_IO_RAID_PT_REPLY -{ - U8 PhysDiskNum; /* 00h */ - U8 Reserved1; /* 01h */ - U8 MsgLength; /* 02h */ - U8 Function; /* 03h */ - U8 CDBLength; /* 04h */ - U8 SenseBufferLength; /* 05h */ - U8 Reserved2; /* 06h */ - U8 MsgFlags; /* 07h */ - U32 MsgContext; /* 08h */ - U8 SCSIStatus; /* 0Ch */ - U8 SCSIState; /* 0Dh */ - U16 IOCStatus; /* 0Eh */ - U32 IOCLogInfo; /* 10h */ - U32 TransferCount; /* 14h */ - U32 SenseCount; /* 18h */ - U32 ResponseInfo; /* 1Ch */ -} MSG_SCSI_IO_RAID_PT_REPLY, MPI_POINTER PTR_MSG_SCSI_IO_RAID_PT_REPLY, - SCSIIORaidPassthroughReply_t, MPI_POINTER pSCSIIORaidPassthroughReply_t; - - -/****************************************************************************/ -/* Mailbox reqeust structure */ -/****************************************************************************/ - -typedef struct _MSG_MAILBOX_REQUEST -{ - U16 Reserved1; - U8 ChainOffset; - U8 Function; - U16 Reserved2; - U8 Reserved3; - U8 MsgFlags; - U32 MsgContext; - U8 Command[10]; - U16 Reserved4; - SGE_IO_UNION SGL; -} MSG_MAILBOX_REQUEST, MPI_POINTER PTR_MSG_MAILBOX_REQUEST, - MailboxRequest_t, MPI_POINTER pMailboxRequest_t; - - -/* Mailbox reply structure */ -typedef struct _MSG_MAILBOX_REPLY -{ - U16 Reserved1; /* 00h */ - U8 MsgLength; /* 02h */ - U8 Function; /* 03h */ - U16 Reserved2; /* 04h */ - U8 Reserved3; /* 06h */ - U8 MsgFlags; /* 07h */ - U32 MsgContext; /* 08h */ - U16 MailboxStatus; /* 0Ch */ - U16 IOCStatus; /* 0Eh */ - U32 IOCLogInfo; /* 10h */ - U32 Reserved4; /* 14h */ -} MSG_MAILBOX_REPLY, MPI_POINTER PTR_MSG_MAILBOX_REPLY, - MailboxReply_t, MPI_POINTER pMailboxReply_t; - -#endif - - - -/* $FreeBSD: /repoman/r/ncvs/src/sys/dev/mpt/mpilib/mpi_targ.h,v 1.5 2005/07/10 15:05:39 scottl Exp $ */ -/*- - * Copyright (c) 2000-2005, LSI Logic Corporation and its contributors. - * All rights reserved. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions are - * met: - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce at minimum a disclaimer - * substantially similar to the "NO WARRANTY" disclaimer below - * ("Disclaimer") and any redistribution must be conditioned upon including - * a substantially similar Disclaimer requirement for further binary - * redistribution. - * 3. Neither the name of the LSI Logic Corporation nor the names of its - * contributors may be used to endorse or promote products derived from - * this software without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" - * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE - * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE - * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR - * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF - * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS - * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN - * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) - * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF THE COPYRIGHT - * OWNER OR CONTRIBUTOR IS ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - * - * Name: MPI_TARG.H - * Title: MPI Target mode messages and structures - * Creation Date: June 22, 2000 - * - * MPI_TARG.H Version: 01.02.09 - * - * Version History - * --------------- - * - * Date Version Description - * -------- -------- ------------------------------------------------------ - * 05-08-00 00.10.01 Original release for 0.10 spec dated 4/26/2000. - * 06-06-00 01.00.01 Update version number for 1.0 release. - * 06-22-00 01.00.02 Added _MSG_TARGET_CMD_BUFFER_POST_REPLY structure. - * Corrected DECSRIPTOR typo to DESCRIPTOR. - * 11-02-00 01.01.01 Original release for post 1.0 work - * Modified target mode to use IoIndex instead of - * HostIndex and IocIndex. Added Alias. - * 01-09-01 01.01.02 Added defines for TARGET_ASSIST_FLAGS_REPOST_CMD_BUFFER - * and TARGET_STATUS_SEND_FLAGS_REPOST_CMD_BUFFER. - * 02-20-01 01.01.03 Started using MPI_POINTER. - * Added structures for MPI_TARGET_SCSI_SPI_CMD_BUFFER and - * MPI_TARGET_FCP_CMD_BUFFER. - * 03-27-01 01.01.04 Added structure offset comments. - * 08-08-01 01.02.01 Original release for v1.2 work. - * 09-28-01 01.02.02 Added structure for MPI_TARGET_SCSI_SPI_STATUS_IU. - * Added PriorityReason field to some replies and - * defined more PriorityReason codes. - * Added some defines for to support previous version - * of MPI. - * 10-04-01 01.02.03 Added PriorityReason to MSG_TARGET_ERROR_REPLY. - * 11-01-01 01.02.04 Added define for TARGET_STATUS_SEND_FLAGS_HIGH_PRIORITY. - * 03-14-02 01.02.05 Modified MPI_TARGET_FCP_RSP_BUFFER to get the proper - * byte ordering. - * 05-31-02 01.02.06 Modified TARGET_MODE_REPLY_ALIAS_MASK to only include - * one bit. - * Added AliasIndex field to MPI_TARGET_FCP_CMD_BUFFER. - * 09-16-02 01.02.07 Added flags for confirmed completion. - * Added PRIORITY_REASON_TARGET_BUSY. - * 11-15-02 01.02.08 Added AliasID field to MPI_TARGET_SCSI_SPI_CMD_BUFFER. - * 04-01-03 01.02.09 Added OptionalOxid field to MPI_TARGET_FCP_CMD_BUFFER. - * -------------------------------------------------------------------------- - */ - -#ifndef MPI_TARG_H -#define MPI_TARG_H - - -/****************************************************************************** -* -* S C S I T a r g e t M e s s a g e s -* -*******************************************************************************/ - -typedef struct _CMD_BUFFER_DESCRIPTOR -{ - U16 IoIndex; /* 00h */ - U16 Reserved; /* 02h */ - union /* 04h */ - { - U32 PhysicalAddress32; - U64 PhysicalAddress64; - } u; -} CMD_BUFFER_DESCRIPTOR, MPI_POINTER PTR_CMD_BUFFER_DESCRIPTOR, - CmdBufferDescriptor_t, MPI_POINTER pCmdBufferDescriptor_t; - - -/****************************************************************************/ -/* Target Command Buffer Post Request */ -/****************************************************************************/ - -typedef struct _MSG_TARGET_CMD_BUFFER_POST_REQUEST -{ - U8 BufferPostFlags; /* 00h */ - U8 BufferCount; /* 01h */ - U8 ChainOffset; /* 02h */ - U8 Function; /* 03h */ - U8 BufferLength; /* 04h */ - U8 Reserved; /* 05h */ - U8 Reserved1; /* 06h */ - U8 MsgFlags; /* 07h */ - U32 MsgContext; /* 08h */ - CMD_BUFFER_DESCRIPTOR Buffer[1]; /* 0Ch */ -} MSG_TARGET_CMD_BUFFER_POST_REQUEST, MPI_POINTER PTR_MSG_TARGET_CMD_BUFFER_POST_REQUEST, - TargetCmdBufferPostRequest_t, MPI_POINTER pTargetCmdBufferPostRequest_t; - -#define CMD_BUFFER_POST_FLAGS_PORT_MASK (0x01) -#define CMD_BUFFER_POST_FLAGS_ADDR_MODE_MASK (0x80) -#define CMD_BUFFER_POST_FLAGS_ADDR_MODE_32 (0) -#define CMD_BUFFER_POST_FLAGS_ADDR_MODE_64 (1) -#define CMD_BUFFER_POST_FLAGS_64_BIT_ADDR (0x80) - -#define CMD_BUFFER_POST_IO_INDEX_MASK (0x00003FFF) -#define CMD_BUFFER_POST_IO_INDEX_MASK_0100 (0x000003FF) /* obsolete */ - - -typedef struct _MSG_TARGET_CMD_BUFFER_POST_REPLY -{ - U8 BufferPostFlags; /* 00h */ - U8 BufferCount; /* 01h */ - U8 MsgLength; /* 02h */ - U8 Function; /* 03h */ - U8 BufferLength; /* 04h */ - U8 Reserved; /* 05h */ - U8 Reserved1; /* 06h */ - U8 MsgFlags; /* 07h */ - U32 MsgContext; /* 08h */ - U16 Reserved2; /* 0Ch */ - U16 IOCStatus; /* 0Eh */ - U32 IOCLogInfo; /* 10h */ -} MSG_TARGET_CMD_BUFFER_POST_REPLY, MPI_POINTER PTR_MSG_TARGET_CMD_BUFFER_POST_REPLY, - TargetCmdBufferPostReply_t, MPI_POINTER pTargetCmdBufferPostReply_t; - -/* the following structure is obsolete as of MPI v1.2 */ -typedef struct _MSG_PRIORITY_CMD_RECEIVED_REPLY -{ - U16 Reserved; /* 00h */ - U8 MsgLength; /* 02h */ - U8 Function; /* 03h */ - U16 Reserved1; /* 04h */ - U8 Reserved2; /* 06h */ - U8 MsgFlags; /* 07h */ - U32 MsgContext; /* 08h */ - U8 PriorityReason; /* 0Ch */ - U8 Reserved3; /* 0Dh */ - U16 IOCStatus; /* 0Eh */ - U32 IOCLogInfo; /* 10h */ - U32 ReplyWord; /* 14h */ -} MSG_PRIORITY_CMD_RECEIVED_REPLY, MPI_POINTER PTR_MSG_PRIORITY_CMD_RECEIVED_REPLY, - PriorityCommandReceivedReply_t, MPI_POINTER pPriorityCommandReceivedReply_t; - -#define PRIORITY_REASON_NO_DISCONNECT (0x00) -#define PRIORITY_REASON_SCSI_TASK_MANAGEMENT (0x01) -#define PRIORITY_REASON_CMD_PARITY_ERR (0x02) -#define PRIORITY_REASON_MSG_OUT_PARITY_ERR (0x03) -#define PRIORITY_REASON_LQ_CRC_ERR (0x04) -#define PRIORITY_REASON_CMD_CRC_ERR (0x05) -#define PRIORITY_REASON_PROTOCOL_ERR (0x06) -#define PRIORITY_REASON_DATA_OUT_PARITY_ERR (0x07) -#define PRIORITY_REASON_DATA_OUT_CRC_ERR (0x08) -#define PRIORITY_REASON_TARGET_BUSY (0x09) -#define PRIORITY_REASON_UNKNOWN (0xFF) - - -typedef struct _MSG_TARGET_CMD_BUFFER_POST_ERROR_REPLY -{ - U16 Reserved; /* 00h */ - U8 MsgLength; /* 02h */ - U8 Function; /* 03h */ - U16 Reserved1; /* 04h */ - U8 Reserved2; /* 06h */ - U8 MsgFlags; /* 07h */ - U32 MsgContext; /* 08h */ - U8 PriorityReason; /* 0Ch */ - U8 Reserved3; /* 0Dh */ - U16 IOCStatus; /* 0Eh */ - U32 IOCLogInfo; /* 10h */ - U32 ReplyWord; /* 14h */ -} MSG_TARGET_CMD_BUFFER_POST_ERROR_REPLY, - MPI_POINTER PTR_MSG_TARGET_CMD_BUFFER_POST_ERROR_REPLY, - TargetCmdBufferPostErrorReply_t, MPI_POINTER pTargetCmdBufferPostErrorReply_t; - - -typedef struct _MPI_TARGET_FCP_CMD_BUFFER -{ - U8 FcpLun[8]; /* 00h */ - U8 FcpCntl[4]; /* 08h */ - U8 FcpCdb[16]; /* 0Ch */ - U32 FcpDl; /* 1Ch */ - U8 AliasIndex; /* 20h */ - U8 Reserved1; /* 21h */ - U16 OptionalOxid; /* 22h */ -} MPI_TARGET_FCP_CMD_BUFFER, MPI_POINTER PTR_MPI_TARGET_FCP_CMD_BUFFER, - MpiTargetFcpCmdBuffer, MPI_POINTER pMpiTargetFcpCmdBuffer; - - -typedef struct _MPI_TARGET_SCSI_SPI_CMD_BUFFER -{ - /* SPI L_Q information unit */ - U8 L_QType; /* 00h */ - U8 Reserved; /* 01h */ - U16 Tag; /* 02h */ - U8 LogicalUnitNumber[8]; /* 04h */ - U32 DataLength; /* 0Ch */ - /* SPI command information unit */ - U8 ReservedFirstByteOfCommandIU; /* 10h */ - U8 TaskAttribute; /* 11h */ - U8 TaskManagementFlags; /* 12h */ - U8 AdditionalCDBLength; /* 13h */ - U8 CDB[16]; /* 14h */ - /* Alias ID */ - U8 AliasID; /* 24h */ - U8 Reserved1; /* 25h */ - U16 Reserved2; /* 26h */ -} MPI_TARGET_SCSI_SPI_CMD_BUFFER, - MPI_POINTER PTR_MPI_TARGET_SCSI_SPI_CMD_BUFFER, - MpiTargetScsiSpiCmdBuffer, MPI_POINTER pMpiTargetScsiSpiCmdBuffer; - - -/****************************************************************************/ -/* Target Assist Request */ -/****************************************************************************/ - -typedef struct _MSG_TARGET_ASSIST_REQUEST -{ - U8 StatusCode; /* 00h */ - U8 TargetAssistFlags; /* 01h */ - U8 ChainOffset; /* 02h */ - U8 Function; /* 03h */ - U16 QueueTag; /* 04h */ - U8 Reserved; /* 06h */ - U8 MsgFlags; /* 07h */ - U32 MsgContext; /* 08h */ - U32 ReplyWord; /* 0Ch */ - U8 LUN[8]; /* 10h */ - U32 RelativeOffset; /* 18h */ - U32 DataLength; /* 1Ch */ - SGE_IO_UNION SGL[1]; /* 20h */ -} MSG_TARGET_ASSIST_REQUEST, MPI_POINTER PTR_MSG_TARGET_ASSIST_REQUEST, - TargetAssistRequest_t, MPI_POINTER pTargetAssistRequest_t; - -#define TARGET_ASSIST_FLAGS_DATA_DIRECTION (0x01) -#define TARGET_ASSIST_FLAGS_AUTO_STATUS (0x02) -#define TARGET_ASSIST_FLAGS_HIGH_PRIORITY (0x04) -#define TARGET_ASSIST_FLAGS_CONFIRMED (0x08) -#define TARGET_ASSIST_FLAGS_REPOST_CMD_BUFFER (0x80) - - -typedef struct _MSG_TARGET_ERROR_REPLY -{ - U16 Reserved; /* 00h */ - U8 MsgLength; /* 02h */ - U8 Function; /* 03h */ - U16 Reserved1; /* 04h */ - U8 Reserved2; /* 06h */ - U8 MsgFlags; /* 07h */ - U32 MsgContext; /* 08h */ - U8 PriorityReason; /* 0Ch */ - U8 Reserved3; /* 0Dh */ - U16 IOCStatus; /* 0Eh */ - U32 IOCLogInfo; /* 10h */ - U32 ReplyWord; /* 14h */ - U32 TransferCount; /* 18h */ -} MSG_TARGET_ERROR_REPLY, MPI_POINTER PTR_MSG_TARGET_ERROR_REPLY, - TargetErrorReply_t, MPI_POINTER pTargetErrorReply_t; - - -/****************************************************************************/ -/* Target Status Send Request */ -/****************************************************************************/ - -typedef struct _MSG_TARGET_STATUS_SEND_REQUEST -{ - U8 StatusCode; /* 00h */ - U8 StatusFlags; /* 01h */ - U8 ChainOffset; /* 02h */ - U8 Function; /* 03h */ - U16 QueueTag; /* 04h */ - U8 Reserved; /* 06h */ - U8 MsgFlags; /* 07h */ - U32 MsgContext; /* 08h */ - U32 ReplyWord; /* 0Ch */ - U8 LUN[8]; /* 10h */ - SGE_SIMPLE_UNION StatusDataSGE; /* 18h */ -} MSG_TARGET_STATUS_SEND_REQUEST, MPI_POINTER PTR_MSG_TARGET_STATUS_SEND_REQUEST, - TargetStatusSendRequest_t, MPI_POINTER pTargetStatusSendRequest_t; - -#define TARGET_STATUS_SEND_FLAGS_AUTO_GOOD_STATUS (0x01) -#define TARGET_STATUS_SEND_FLAGS_HIGH_PRIORITY (0x04) -#define TARGET_STATUS_SEND_FLAGS_CONFIRMED (0x08) -#define TARGET_STATUS_SEND_FLAGS_REPOST_CMD_BUFFER (0x80) - -/* - * NOTE: FCP_RSP data is big-endian. When used on a little-endian system, this - * structure properly orders the bytes. - */ -typedef struct _MPI_TARGET_FCP_RSP_BUFFER -{ - U8 Reserved0[8]; /* 00h */ - U8 Reserved1[2]; /* 08h */ - U8 FcpFlags; /* 0Ah */ - U8 FcpStatus; /* 0Bh */ - U32 FcpResid; /* 0Ch */ - U32 FcpSenseLength; /* 10h */ - U32 FcpResponseLength; /* 14h */ - U8 FcpResponseData[8]; /* 18h */ - U8 FcpSenseData[32]; /* Pad to 64 bytes */ /* 20h */ -} MPI_TARGET_FCP_RSP_BUFFER, MPI_POINTER PTR_MPI_TARGET_FCP_RSP_BUFFER, - MpiTargetFcpRspBuffer, MPI_POINTER pMpiTargetFcpRspBuffer; - -/* - * NOTE: The SPI status IU is big-endian. When used on a little-endian system, - * this structure properly orders the bytes. - */ -typedef struct _MPI_TARGET_SCSI_SPI_STATUS_IU -{ - U8 Reserved0; /* 00h */ - U8 Reserved1; /* 01h */ - U8 Valid; /* 02h */ - U8 Status; /* 03h */ - U32 SenseDataListLength; /* 04h */ - U32 PktFailuresListLength; /* 08h */ - U8 SenseData[52]; /* Pad the IU to 64 bytes */ /* 0Ch */ -} MPI_TARGET_SCSI_SPI_STATUS_IU, MPI_POINTER PTR_MPI_TARGET_SCSI_SPI_STATUS_IU, - TargetScsiSpiStatusIU_t, MPI_POINTER pTargetScsiSpiStatusIU_t; - -/****************************************************************************/ -/* Target Mode Abort Request */ -/****************************************************************************/ - -typedef struct _MSG_TARGET_MODE_ABORT_REQUEST -{ - U8 AbortType; /* 00h */ - U8 Reserved; /* 01h */ - U8 ChainOffset; /* 02h */ - U8 Function; /* 03h */ - U16 Reserved1; /* 04h */ - U8 Reserved2; /* 06h */ - U8 MsgFlags; /* 07h */ - U32 MsgContext; /* 08h */ - U32 ReplyWord; /* 0Ch */ - U32 MsgContextToAbort; /* 10h */ -} MSG_TARGET_MODE_ABORT, MPI_POINTER PTR_MSG_TARGET_MODE_ABORT, - TargetModeAbort_t, MPI_POINTER pTargetModeAbort_t; - -#define TARGET_MODE_ABORT_TYPE_ALL_CMD_BUFFERS (0x00) -#define TARGET_MODE_ABORT_TYPE_ALL_IO (0x01) -#define TARGET_MODE_ABORT_TYPE_EXACT_IO (0x02) -#define TARGET_MODE_ABORT_TYPE_EXACT_IO_REQUEST (0x03) - -/* Target Mode Abort Reply */ - -typedef struct _MSG_TARGET_MODE_ABORT_REPLY -{ - U16 Reserved; /* 00h */ - U8 MsgLength; /* 02h */ - U8 Function; /* 03h */ - U16 Reserved1; /* 04h */ - U8 Reserved2; /* 06h */ - U8 MsgFlags; /* 07h */ - U32 MsgContext; /* 08h */ - U16 Reserved3; /* 0Ch */ - U16 IOCStatus; /* 0Eh */ - U32 IOCLogInfo; /* 10h */ - U32 AbortCount; /* 14h */ -} MSG_TARGET_MODE_ABORT_REPLY, MPI_POINTER PTR_MSG_TARGET_MODE_ABORT_REPLY, - TargetModeAbortReply_t, MPI_POINTER pTargetModeAbortReply_t; - - -/****************************************************************************/ -/* Target Mode Context Reply */ -/****************************************************************************/ - -#define TARGET_MODE_REPLY_IO_INDEX_MASK (0x00003FFF) -#define TARGET_MODE_REPLY_IO_INDEX_SHIFT (0) -#define TARGET_MODE_REPLY_INITIATOR_INDEX_MASK (0x03FFC000) -#define TARGET_MODE_REPLY_INITIATOR_INDEX_SHIFT (14) -#define TARGET_MODE_REPLY_ALIAS_MASK (0x04000000) -#define TARGET_MODE_REPLY_ALIAS_SHIFT (26) -#define TARGET_MODE_REPLY_PORT_MASK (0x10000000) -#define TARGET_MODE_REPLY_PORT_SHIFT (28) - - -#define GET_IO_INDEX(x) (((x) & TARGET_MODE_REPLY_IO_INDEX_MASK) \ - >> TARGET_MODE_REPLY_IO_INDEX_SHIFT) - -#define SET_IO_INDEX(t, i) \ - ((t) = ((t) & ~TARGET_MODE_REPLY_IO_INDEX_MASK) | \ - (((i) << TARGET_MODE_REPLY_IO_INDEX_SHIFT) & \ - TARGET_MODE_REPLY_IO_INDEX_MASK)) - -#define GET_INITIATOR_INDEX(x) (((x) & TARGET_MODE_REPLY_INITIATOR_INDEX_MASK) \ - >> TARGET_MODE_REPLY_INITIATOR_INDEX_SHIFT) - -#define SET_INITIATOR_INDEX(t, ii) \ - ((t) = ((t) & ~TARGET_MODE_REPLY_INITIATOR_INDEX_MASK) | \ - (((ii) << TARGET_MODE_REPLY_INITIATOR_INDEX_SHIFT) & \ - TARGET_MODE_REPLY_INITIATOR_INDEX_MASK)) - -#define GET_ALIAS(x) (((x) & TARGET_MODE_REPLY_ALIAS_MASK) \ - >> TARGET_MODE_REPLY_ALIAS_SHIFT) - -#define SET_ALIAS(t, a) ((t) = ((t) & ~TARGET_MODE_REPLY_ALIAS_MASK) | \ - (((a) << TARGET_MODE_REPLY_ALIAS_SHIFT) & \ - TARGET_MODE_REPLY_ALIAS_MASK)) - -#define GET_PORT(x) (((x) & TARGET_MODE_REPLY_PORT_MASK) \ - >> TARGET_MODE_REPLY_PORT_SHIFT) - -#define SET_PORT(t, p) ((t) = ((t) & ~TARGET_MODE_REPLY_PORT_MASK) | \ - (((p) << TARGET_MODE_REPLY_PORT_SHIFT) & \ - TARGET_MODE_REPLY_PORT_MASK)) - -/* the following obsolete values are for MPI v1.0 support */ -#define TARGET_MODE_REPLY_0100_MASK_HOST_INDEX (0x000003FF) -#define TARGET_MODE_REPLY_0100_SHIFT_HOST_INDEX (0) -#define TARGET_MODE_REPLY_0100_MASK_IOC_INDEX (0x001FF800) -#define TARGET_MODE_REPLY_0100_SHIFT_IOC_INDEX (11) -#define TARGET_MODE_REPLY_0100_PORT_MASK (0x00400000) -#define TARGET_MODE_REPLY_0100_PORT_SHIFT (22) -#define TARGET_MODE_REPLY_0100_MASK_INITIATOR_INDEX (0x1F800000) -#define TARGET_MODE_REPLY_0100_SHIFT_INITIATOR_INDEX (23) - -#define GET_HOST_INDEX_0100(x) (((x) & TARGET_MODE_REPLY_0100_MASK_HOST_INDEX) \ - >> TARGET_MODE_REPLY_0100_SHIFT_HOST_INDEX) - -#define SET_HOST_INDEX_0100(t, hi) \ - ((t) = ((t) & ~TARGET_MODE_REPLY_0100_MASK_HOST_INDEX) | \ - (((hi) << TARGET_MODE_REPLY_0100_SHIFT_HOST_INDEX) & \ - TARGET_MODE_REPLY_0100_MASK_HOST_INDEX)) - -#define GET_IOC_INDEX_0100(x) (((x) & TARGET_MODE_REPLY_0100_MASK_IOC_INDEX) \ - >> TARGET_MODE_REPLY_0100_SHIFT_IOC_INDEX) - -#define SET_IOC_INDEX_0100(t, ii) \ - ((t) = ((t) & ~TARGET_MODE_REPLY_0100_MASK_IOC_INDEX) | \ - (((ii) << TARGET_MODE_REPLY_0100_SHIFT_IOC_INDEX) & \ - TARGET_MODE_REPLY_0100_MASK_IOC_INDEX)) - -#define GET_INITIATOR_INDEX_0100(x) \ - (((x) & TARGET_MODE_REPLY_0100_MASK_INITIATOR_INDEX) \ - >> TARGET_MODE_REPLY_0100_SHIFT_INITIATOR_INDEX) - -#define SET_INITIATOR_INDEX_0100(t, ii) \ - ((t) = ((t) & ~TARGET_MODE_REPLY_0100_MASK_INITIATOR_INDEX) | \ - (((ii) << TARGET_MODE_REPLY_0100_SHIFT_INITIATOR_INDEX) & \ - TARGET_MODE_REPLY_0100_MASK_INITIATOR_INDEX)) - - -#endif diff --git a/sys/dev/ic/mpt_openbsd.c b/sys/dev/ic/mpt_openbsd.c deleted file mode 100644 index 4bfb5da3276..00000000000 --- a/sys/dev/ic/mpt_openbsd.c +++ /dev/null @@ -1,1578 +0,0 @@ -/* $OpenBSD: mpt_openbsd.c,v 1.33 2006/04/20 20:29:56 miod Exp $ */ -/* $NetBSD: mpt_netbsd.c,v 1.7 2003/07/14 15:47:11 lukem Exp $ */ - -/* - * Copyright (c) 2004 Milos Urbanek - * All rights reserved. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * - * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND - * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE - * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE FOR - * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS - * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) - * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT - * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY - * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF - * SUCH DAMAGE. - */ - -/* - * Copyright (c) 2003 Wasabi Systems, Inc. - * All rights reserved. - * - * Written by Jason R. Thorpe for Wasabi Systems, Inc. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * 3. All advertising materials mentioning features or use of this software - * must display the following acknowledgement: - * This product includes software developed for the NetBSD Project by - * Wasabi Systems, Inc. - * 4. The name of Wasabi Systems, Inc. may not be used to endorse - * or promote products derived from this software without specific prior - * written permission. - * - * THIS SOFTWARE IS PROVIDED BY WASABI SYSTEMS, INC. ``AS IS'' AND - * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED - * TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR - * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL WASABI SYSTEMS, INC - * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR - * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF - * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS - * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN - * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) - * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE - * POSSIBILITY OF SUCH DAMAGE. - */ - -/* - * Copyright (c) 2000, 2001 by Greg Ansley - * Partially derived from Matt Jacob's ISP driver. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * 1. Redistributions of source code must retain the above copyright - * notice immediately at the beginning of the file, without modification, - * this list of conditions, and the following disclaimer. - * 2. The name of the author may not be used to endorse or promote products - * derived from this software without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND - * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE - * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE FOR - * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS - * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) - * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT - * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY - * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF - * SUCH DAMAGE. - */ -/* - * Additional Copyright (c) 2002 by Matthew Jacob under same license. - */ - -/* - * mpt_openbsd.c: - * - * OpenBSD-specific routines for LSI Fusion adapters. Includes some - * bus_dma glue, and SCSI glue. - * - * Adapted from the NetBSD "mpt" driver by Milos Urbanek for - * ZOOM International, s.r.o. - */ - -#include <sys/cdefs.h> -/* __KERNEL_RCSID(0, "$NetBSD: mpt_netbsd.c,v 1.7 2003/07/14 15:47:11 lukem Exp $"); */ - -#include <dev/ic/mpt.h> /* pulls in all headers */ - -void mpt_run_ppr(struct mpt_softc *, int); -int mpt_ppr(struct mpt_softc *, struct scsi_link *, int, int); -int mpt_poll(struct mpt_softc *, struct scsi_xfer *, int); -void mpt_timeout(void *); -void mpt_done(struct mpt_softc *, uint32_t); -int mpt_run_xfer(struct mpt_softc *, struct scsi_xfer *); -void mpt_check_xfer_settings(struct mpt_softc *, struct scsi_xfer *, MSG_SCSI_IO_REQUEST *); -void mpt_ctlop(struct mpt_softc *, void *vmsg, uint32_t); -void mpt_event_notify_reply(struct mpt_softc *, MSG_EVENT_NOTIFY_REPLY *); - -int mpt_action(struct scsi_xfer *); -void mpt_minphys(struct buf *); - -struct cfdriver mpt_cd = { - NULL, "mpt", DV_DULL -}; - -/* the below structure is so we have a default dev struct for our link struct */ -static struct scsi_device mpt_dev = { - NULL, /* Use default error handler */ - NULL, /* have a queue, served by this */ - NULL, /* have no async handler */ - NULL, /* Use default 'done' routine */ -}; - -enum mpt_scsi_speed { U320, U160, U80 }; - -/* - * try speed and - * return 0 if failed - * return 1 if passed - */ -int -mpt_ppr(struct mpt_softc *mpt, struct scsi_link *sc_link, int speed, int flags) -{ - CONFIG_PAGE_SCSI_DEVICE_0 page0; - CONFIG_PAGE_SCSI_DEVICE_1 page1; - uint8_t tp; - int error; - struct scsi_inquiry_data inqbuf; - - DNPRINTF(30, "Entering PPR\n"); - - if (mpt->is_fc) { - /* - * SCSI transport settings don't make any sense for - * Fibre Channel; silently ignore the request. - */ - return 1; /* success */ - } - - /* - * Always allow disconnect; we don't have a way to disable - * it right now, in any case. - */ - mpt->mpt_disc_enable |= (1 << sc_link->target); - - /* - * Enable tagged queueing. - */ - if (sc_link->quirks & SDEV_NOTAGS) - mpt->mpt_tag_enable &= ~(1 << sc_link->target); - else - mpt->mpt_tag_enable |= (1 << sc_link->target); - - page1 = mpt->mpt_dev_page1[sc_link->target]; - - /* - * Set the wide/narrow parameter for the target. - */ - if (sc_link->quirks & SDEV_NOWIDE) - page1.RequestedParameters &= ~MPI_SCSIDEVPAGE1_RP_WIDE; - else { - page1.RequestedParameters |= MPI_SCSIDEVPAGE1_RP_WIDE; - } - - /* - * Set the synchronous parameters for the target. - */ - page1.RequestedParameters &= - ~(MPI_SCSIDEVPAGE1_RP_MIN_SYNC_PERIOD_MASK | - MPI_SCSIDEVPAGE1_RP_MAX_SYNC_OFFSET_MASK | - MPI_SCSIDEVPAGE1_RP_DT | MPI_SCSIDEVPAGE1_RP_QAS | - MPI_SCSIDEVPAGE1_RP_IU); - - if (!(sc_link->quirks & SDEV_NOSYNC)) { - int factor, offset, np; - - /* - * Factor: - * 0x08 = U320 = 6.25ns - * 0x09 = U160 = 12.5ns - * 0x0a = U80 = 25ns - */ - factor = (mpt->mpt_port_page0.Capabilities >> 8) & 0xff; - offset = (mpt->mpt_port_page0.Capabilities >> 16) & 0xff; - np = 0; - - switch (speed) { - case U320: - /* do nothing */ - break; - - case U160: - factor = 0x09; /* force U160 */ - break; - - case U80: - factor = 0x0a; /* force U80 */ - } - - if (factor < 0x9) { - /* Ultra320 enable QAS & IU */ - np |= MPI_SCSIDEVPAGE1_RP_QAS | MPI_SCSIDEVPAGE1_RP_IU; - } - if (factor < 0xa) { - /* >= Ultra160 enable DT transfer */ - np |= MPI_SCSIDEVPAGE1_RP_DT; - } - np |= (factor << 8) | (offset << 16); - page1.RequestedParameters |= np; - } - - /* write parameters out to chip */ - if (mpt_write_cfg_page(mpt, sc_link->target, &page1.Header)) { - mpt_prt(mpt, "unable to write Device Page 1"); - return 0; - } - - /* make sure the parameters were written */ - if (mpt_read_cfg_page(mpt, sc_link->target, &page1.Header)) { - mpt_prt(mpt, "unable to read back Device Page 1"); - return 0; - } - - mpt->mpt_dev_page1[sc_link->target] = page1; - - DNPRINTF(30, - "%s: SPI Target %d Page 1: RequestedParameters %x Config %x\n", - DEVNAME(mpt), - sc_link->target, - mpt->mpt_dev_page1[sc_link->target].RequestedParameters, - mpt->mpt_dev_page1[sc_link->target].Configuration); - - /* - * use INQUIRY for PPR two reasons: - * 1) actually transfer data at requested speed - * 2) no need to test for TUR QUIRK - */ - error = scsi_inquire(sc_link, &inqbuf, flags); - if (error) { - mpt_prt(mpt, "Invalid INQUIRY on target: %d", sc_link->target); - return 0; - } - - /* read page 0 back to figure out if the PPR worked */ - page0 = mpt->mpt_dev_page0[sc_link->target]; - if (mpt_read_cfg_page(mpt, sc_link->target, &page0.Header)) { - mpt_prt(mpt, "unable to read Device Page 0"); - return 0; - } - - DNPRINTF(30, - "%s: SPI Tgt %d Page 0: NParms %x Information %x\n", - DEVNAME(mpt), - sc_link->target, - page0.NegotiatedParameters, page0.Information); - - if (!(page0.NegotiatedParameters & 0x07) && (speed == U320)) { - /* - * if lowest 3 aren't set the PPR probably failed, - * retry with other parameters - */ - DNPRINTF(30, "%s: U320 PPR failed\n", DEVNAME(mpt)); - return 0; - } - - if ((((page0.NegotiatedParameters >> 8) & 0xff) > 0x09) && - (speed == U160)) { - /* if transfer period > 0x09 then U160 PPR failed, retry */ - DNPRINTF(30, "%s: U160 PPR failed\n", DEVNAME(mpt)); - return 0; - } - - /* - * Bit 3 - PPR rejected: IOC sets this if the device rejects PPR. - * Bit 2 - WDTR rejected: IOC sets this if the device rejects WDTR. - * Bit 1 - SDTR Rejected: IOC sets this if the device rejects SDTR. - * Bit 0 - 1 A SCSI SDTR, WDTR, or PPR negotiation has occurred. - */ - if (page0.Information & 0x0e) { - /* target rejected PPR message */ - mpt_prt(mpt, "Target %d rejected PPR message with %02x", - sc_link->target, - (uint8_t)page0.Information); - - return 0; - } - - /* print PPR results */ - switch ((page0.NegotiatedParameters >> 8) & 0xff) { - case 0x08: - tp = 160; - break; - - case 0x09: - tp = 80; - break; - - case 0x0a: - tp = 40; - break; - - case 0x0b: - tp = 20; - break; - - case 0x0c: - tp = 10; - break; - - default: - tp = 0; - } - - mpt_prt(mpt, - "target %d %s at %dMHz width %dbit offset %d QAS %d DT %d IU %d", - sc_link->target, - tp ? "Synchronous" : "Asynchronous", - tp, - (page0.NegotiatedParameters & 0x20000000) ? 16 : 8, - (page0.NegotiatedParameters >> 16) & 0xff, - (page0.NegotiatedParameters & 0x04) ? 1 : 0, - (page0.NegotiatedParameters & 0x02) ? 1 : 0, - (page0.NegotiatedParameters & 0x01) ? 1 : 0); - - return 1; /* success */ -} - -/* - * Run PPR on all attached devices - */ -void -mpt_run_ppr(struct mpt_softc *mpt, int flags) -{ - struct scsi_link *sc_link; - struct device *dev; - u_int8_t target; - u_int16_t buswidth; - - /* walk device list */ - for (dev = TAILQ_FIRST(&alldevs); dev != NULL; - dev = TAILQ_NEXT(dev, dv_list)) { - if (dev->dv_parent == (struct device *)mpt) { - /* found scsibus softc */ - buswidth = ((struct scsi_link *)&mpt->sc_link)-> - adapter_buswidth; - /* printf("mpt_softc: %x scsibus: %x buswidth: %d\n", - * mpt, dev, buswidth); */ - /* walk target list */ - for (target = 0; target < buswidth; target++) { - sc_link = ((struct scsibus_softc *)dev)-> - sc_link[target][0]; - if ((sc_link != NULL)) { - /* got a device! run PPR */ - /* skip CPU devices since they - * can crash at U320 speeds */ - if ((sc_link->inqdata.device & SID_TYPE) - == T_PROCESSOR) { - continue; - } - if (mpt_ppr(mpt, sc_link, U320, flags)){ - mpt->mpt_negotiated_speed - [target] = U320; - continue; - } - - if (mpt_ppr(mpt, sc_link, U160, flags)){ - mpt->mpt_negotiated_speed - [target] = U160; - continue; - } - - if (mpt_ppr(mpt, sc_link, U80, flags)) { - mpt->mpt_negotiated_speed - [target] = U80; - continue; - } - } /* sc_link */ - } /* for target */ - } /* if dev */ - } /* end for dev */ -} - -/* - * Complete attachment of hardware, include subdevices. - */ -void -mpt_attach(struct mpt_softc *mpt) -{ - struct scsi_link *lptr = &mpt->sc_link; - - mpt->bus = 0; /* XXX ?? */ - - /* Fill in the scsi_adapter. */ - mpt->sc_adapter.scsi_cmd = mpt_action; - mpt->sc_adapter.scsi_minphys = mpt_minphys; - - /* Fill in the prototype scsi_link */ - lptr->adapter_softc = mpt; - lptr->device = &mpt_dev; - lptr->adapter = &mpt->sc_adapter; - lptr->flags = 0; - lptr->luns = 8; - - if (mpt->is_fc) { - lptr->adapter_buswidth = 256; - lptr->adapter_target = 256; - } else { - lptr->adapter_buswidth = 16; - lptr->adapter_target = mpt->mpt_ini_id; - } - lptr->openings = MPT_MAX_REQUESTS(mpt) / lptr->adapter_buswidth; - - DNPRINTF(10, "%s: IM support: %x\n", DEVNAME(mpt), mpt->im_support); - - (void) config_found(&mpt->mpt_dev, lptr, scsiprint); - - /* done attaching now walk targets and PPR them */ - /* FC does not do PPR */ - if (!mpt->is_fc) { - mpt_run_ppr(mpt, SCSI_POLL); - } -} - -int -mpt_dma_mem_alloc(struct mpt_softc *mpt) -{ - bus_dma_segment_t reply_seg, request_seg; - int reply_rseg, request_rseg; - bus_addr_t pptr, end; - caddr_t vptr; - size_t len; - int error, i; - - /* Check if we have already allocated the reply memory. */ - if (mpt->reply != NULL) - return (0); - - /* - * Allocate the request pool. This isn't really DMA'd memory, - * but it's a convenient place to do it. - */ - len = sizeof(struct req_entry) * MPT_MAX_REQUESTS(mpt); - mpt->request_pool = malloc(len, M_DEVBUF, M_WAITOK); - if (mpt->request_pool == NULL) { - printf("%s: unable to allocate request pool\n", - mpt->mpt_dev.dv_xname); - return (ENOMEM); - } - bzero(mpt->request_pool, len); - - /* - * Allocate DMA resources for reply buffers. - */ - error = bus_dmamap_create(mpt->sc_dmat, PAGE_SIZE, 1, PAGE_SIZE, - 0, 0, &mpt->reply_dmap); - if (error) { - printf("%s: unable to create reply DMA map, error = %d\n", - mpt->mpt_dev.dv_xname, error); - goto free_request_pool; - } - - error = bus_dmamem_alloc(mpt->sc_dmat, PAGE_SIZE, PAGE_SIZE, 0, - &reply_seg, 1, &reply_rseg, 0); - if (error) { - printf("%s: unable to allocate reply area, error = %d\n", - mpt->mpt_dev.dv_xname, error); - goto destroy_reply; - } - - error = bus_dmamem_map(mpt->sc_dmat, &reply_seg, reply_rseg, PAGE_SIZE, - (caddr_t *) &mpt->reply, BUS_DMA_COHERENT/*XXX*/); - if (error) { - printf("%s: unable to map reply area, error = %d\n", - mpt->mpt_dev.dv_xname, error); - goto free_reply; - } - - error = bus_dmamap_load(mpt->sc_dmat, mpt->reply_dmap, mpt->reply, - PAGE_SIZE, NULL, 0); - if (error) { - printf("%s: unable to load reply DMA map, error = %d\n", - mpt->mpt_dev.dv_xname, error); - goto unmap_reply; - } - - /* - * Allocate DMA resources for request buffers. - */ - error = bus_dmamap_create(mpt->sc_dmat, MPT_REQ_MEM_SIZE(mpt), 1, - MPT_REQ_MEM_SIZE(mpt), 0, 0, &mpt->request_dmap); - if (error) { - printf("%s: unable to create request DMA map, error = %d\n", - mpt->mpt_dev.dv_xname, error); - goto unload_reply; - } - - error = bus_dmamem_alloc(mpt->sc_dmat, MPT_REQ_MEM_SIZE(mpt), - PAGE_SIZE, 0, &request_seg, 1, &request_rseg, 0); - if (error) { - printf("%s: unable to allocate request area, error = %d\n", - mpt->mpt_dev.dv_xname, error); - goto destroy_request; - } - - error = bus_dmamem_map(mpt->sc_dmat, &request_seg, request_rseg, - MPT_REQ_MEM_SIZE(mpt), (caddr_t *) &mpt->request, 0); - if (error) { - printf("%s: unable to map request area, error = %d\n", - mpt->mpt_dev.dv_xname, error); - goto free_request; - } - - error = bus_dmamap_load(mpt->sc_dmat, mpt->request_dmap, mpt->request, - MPT_REQ_MEM_SIZE(mpt), NULL, 0); - if (error) { - printf("%s: unable to load request DMA map, error = %d\n", - mpt->mpt_dev.dv_xname, error); - goto unmap_request; - } - - pptr = mpt->request_dmap->dm_segs[0].ds_addr; - vptr = (caddr_t) mpt->request; - end = pptr + MPT_REQ_MEM_SIZE(mpt); - - for (i = 0; pptr < end; i++) { - struct req_entry *req = &mpt->request_pool[i]; - req->index = i; - - /* Store location of Request Data */ - req->req_pbuf = pptr; - req->req_vbuf = vptr; - - pptr += MPT_REQUEST_AREA; - vptr += MPT_REQUEST_AREA; - - req->sense_pbuf = (pptr - MPT_SENSE_SIZE); - req->sense_vbuf = (vptr - MPT_SENSE_SIZE); - - error = bus_dmamap_create(mpt->sc_dmat, MAXPHYS, - MPT_SGL_MAX, MAXPHYS, 0, 0, &req->dmap); - if (error) { - printf("%s: unable to create req %d DMA map, error = " - "%d", mpt->mpt_dev.dv_xname, i, error); - goto unload_request; - } - } - - mpt->request_phys = mpt->request_dmap->dm_segs[0].ds_addr; - mpt->reply_phys = mpt->reply_dmap->dm_segs[0].ds_addr; - return (0); - -unload_request: - for (--i; i >= 0; i--) { - struct req_entry *req = &mpt->request_pool[i]; - if (req->dmap != NULL) - bus_dmamap_destroy(mpt->sc_dmat, req->dmap); - } - bus_dmamap_unload(mpt->sc_dmat, mpt->request_dmap); -unmap_request: - bus_dmamem_unmap(mpt->sc_dmat, (caddr_t)mpt->request, PAGE_SIZE); -free_request: - bus_dmamem_free(mpt->sc_dmat, &request_seg, 1); -destroy_request: - bus_dmamap_destroy(mpt->sc_dmat, mpt->request_dmap); - -unload_reply: - bus_dmamap_unload(mpt->sc_dmat, mpt->reply_dmap); -unmap_reply: - bus_dmamem_unmap(mpt->sc_dmat, (caddr_t)mpt->reply, PAGE_SIZE); -free_reply: - bus_dmamem_free(mpt->sc_dmat, &reply_seg, 1); -destroy_reply: - bus_dmamap_destroy(mpt->sc_dmat, mpt->reply_dmap); - -free_request_pool: - free(mpt->request_pool, M_DEVBUF); - - mpt->reply = NULL; - mpt->request = NULL; - mpt->request_pool = NULL; - - return (error); -} - -int -mpt_intr(void *arg) -{ - struct mpt_softc *mpt = arg; - int nrepl = 0; - uint32_t reply; - - /* - if ((mpt_read(mpt, MPT_OFFSET_INTR_STATUS) & MPT_INTR_REPLY_READY) == 0) - return (0); - */ - - /* - * Speed up trick to save one PCI read. - * Reply FIFO replies 0xffffffff whenever - * MPT_OFFSET_INTR_STATUS & MPT_INTR_REPLY_READY == 0 - * - */ - - reply = mpt_pop_reply_queue(mpt); - - if (reply == 0xffffffff) { - /* check doorbell, this is error path not IO path */ - /* FIXME for now ignore strays and doorbells */ - return (0); - } - - while (reply != MPT_REPLY_EMPTY) { - nrepl++; -#ifdef MPT_DEBUG - if (mpt_debug > 50) { - if ((reply & MPT_CONTEXT_REPLY) != 0) - /* Address reply; IOC has something to say */ - mpt_print_reply(MPT_REPLY_PTOV(mpt, reply)); - else - /* Context reply; all went well */ - mpt_prt(mpt, "context %u reply OK", reply); - } -#endif /* MPT_DEBUG */ - mpt_done(mpt, reply); - reply = mpt_pop_reply_queue(mpt); - } - return (nrepl != 0); -} - -void -mpt_prt(struct mpt_softc *mpt, const char *fmt, ...) -{ - va_list ap; - - printf("%s: ", mpt->mpt_dev.dv_xname); - va_start(ap, fmt); - vprintf(fmt, ap); - va_end(ap); - printf("\n"); -} - -int -mpt_poll(struct mpt_softc *mpt, struct scsi_xfer *xs, int count) -{ - - /* Timeouts are in msec, so we loop in 1000usec cycles */ - while (count) { - mpt_intr(mpt); - if (xs->flags & ITSDONE) { - return (0); - } - delay(1000); /* only happens in boot, so ok */ - count--; - } - return (1); -} - -void -mpt_timeout(void *arg) -{ - struct req_entry *req = arg; - struct scsi_xfer *xs = req->xfer; - struct scsi_link *linkp = xs->sc_link; - struct mpt_softc *mpt = (void *) linkp->adapter_softc; - uint32_t oseq; - int s, index; - - mpt_prt(mpt, "command timeout"); - sc_print_addr(linkp); - - s = splbio(); - - oseq = req->sequence; - mpt->timeouts++; - if (mpt_intr(mpt)) { - if (req->sequence != oseq) { - mpt_prt(mpt, "recovered from command timeout"); - splx(s); - return; - } - } - mpt_prt(mpt, - "timeout on request index = 0x%x, seq = 0x%08x", - req->index, req->sequence); - mpt_check_doorbell(mpt); - mpt_prt(mpt, "Status 0x%08x, Mask 0x%08x, Doorbell 0x%08x", - mpt_read(mpt, MPT_OFFSET_INTR_STATUS), - mpt_read(mpt, MPT_OFFSET_INTR_MASK), - mpt_read(mpt, MPT_OFFSET_DOORBELL)); -#ifdef MPT_DEBUG - mpt_prt(mpt, "request state: %s", mpt_req_state(req->debug)); - mpt_print_scsi_io_request((MSG_SCSI_IO_REQUEST *)req->req_vbuf); -#else - mpt_prt(mpt, "request state: %i", req->debug); -#endif /* MPT_DEBUG */ - - for(index = 0; index < MPT_MAX_REQUESTS(mpt); index++) - if (req == &mpt->request_pool[index]) { - req->debug = REQ_TIMEOUT; - break; - } - - mpt_done(mpt, index); - - splx(s); -} - -void -mpt_done(struct mpt_softc *mpt, uint32_t reply) -{ - struct scsi_xfer *xs = NULL; - struct scsi_link *linkp; - int index; - struct req_entry *req; - MSG_REQUEST_HEADER *mpt_req; - MSG_SCSI_IO_REPLY *mpt_reply; - - - if ((reply & MPT_CONTEXT_REPLY) == 0) { - /* context reply (ok) */ - mpt_reply = NULL; - index = reply & MPT_CONTEXT_MASK; - } else { - /* address reply (error) */ - - /* XXX BUS_DMASYNC_POSTREAD XXX */ - mpt_reply = MPT_REPLY_PTOV(mpt, reply); -#ifdef MPT_DEBUG - if (mpt_debug > 50) { - uint32_t *pReply = (uint32_t *) mpt_reply; - - mpt_prt(mpt, "Address Reply (index %u):", - mpt_reply->MsgContext & 0xffff); - mpt_prt(mpt, "%08x %08x %08x %08x", - pReply[0], pReply[1], pReply[2], pReply[3]); - mpt_prt(mpt, "%08x %08x %08x %08x", - pReply[4], pReply[5], pReply[6], pReply[7]); - mpt_prt(mpt, "%08x %08x %08x %08x", - pReply[8], pReply[9], pReply[10], pReply[11]); - } -#endif /* MPT_DEBUG */ - index = mpt_reply->MsgContext; - } - - /* - * Address reply with MessageContext high bit set. - * This is most likely a notify message, so we try - * to process it, then free it. - */ - if ((index & 0x80000000) != 0) { - if (mpt_reply != NULL) - mpt_ctlop(mpt, mpt_reply, reply); - else - mpt_prt(mpt, "mpt_done: index 0x%x, NULL reply", index); - return; - } - - /* Did we end up with a valid index into the table? */ - if (index < 0 || index >= MPT_MAX_REQUESTS(mpt)) { - mpt_prt(mpt, "mpt_done: invalid index (0x%x) in reply", index); - return; - } - - req = &mpt->request_pool[index]; - - /* Make sure memory hasn't been trashed. */ - if (req->index != index) { - mpt_prt(mpt, "mpt_done: corrupted struct req_entry (0x%x)", index); - return; - } - - MPT_SYNC_REQ(mpt, req, BUS_DMASYNC_POSTREAD|BUS_DMASYNC_POSTWRITE); - mpt_req = req->req_vbuf; - - /* Short cut for task management replies; nothing more for us to do. */ - if (mpt_req->Function == MPI_FUNCTION_SCSI_TASK_MGMT) { - DNPRINTF(50, "%s: mpt_done: TASK MGMT\n", DEVNAME(mpt)); - goto done; - } - - if (mpt_req->Function == MPI_FUNCTION_PORT_ENABLE) - goto done; - - /* - * At this point, it had better be a SCSI I/O command, but don't - * crash if it isn't. - */ - if (mpt_req->Function != MPI_FUNCTION_SCSI_IO_REQUEST) { - DNPRINTF(10, "%s: mpt_done: unknown Function 0x%x (0x%x)\n", - DEVNAME(mpt), mpt_req->Function, index); - goto done; - } - - /* Recover scsi_xfer from the request structure. */ - xs = req->xfer; - - /* Can't have a SCSI command without a scsi_xfer. */ - if (xs == NULL) { - mpt_prt(mpt, - "mpt_done: no scsi_xfer, index = 0x%x, seq = 0x%08x", - req->index, req->sequence); -#ifdef MPT_DEBUG - mpt_prt(mpt, "request state: %s", mpt_req_state(req->debug)); - mpt_prt(mpt, "mpt_request:"); - mpt_print_scsi_io_request((MSG_SCSI_IO_REQUEST *)req->req_vbuf); -#else - mpt_prt(mpt, "request state: %i", req->debug); -#endif /* MPT_DEBUG */ - - if (mpt_reply != NULL) { -#ifdef MPT_DEBUG - mpt_prt(mpt, "mpt_reply:"); - mpt_print_reply(mpt_reply); -#endif /* MPT_DEBUG */ - } else { - mpt_prt(mpt, "context reply: 0x%08x", reply); - } - goto done; - } - - timeout_del(&xs->stimeout); - - linkp = xs->sc_link; - - /* - * If we were a data transfer, unload the map that described - * the data buffer. - */ - if (xs->datalen != 0) { - bus_dmamap_sync(mpt->sc_dmat, req->dmap, 0, - req->dmap->dm_mapsize, - (xs->flags & SCSI_DATA_IN) ? BUS_DMASYNC_POSTREAD - : BUS_DMASYNC_POSTWRITE); - bus_dmamap_unload(mpt->sc_dmat, req->dmap); - } - - if (req->debug == REQ_TIMEOUT) { - xs->error = XS_TIMEOUT; - xs->status = SCSI_OK; - xs->resid = 0; - goto done; - } else if (mpt_reply == NULL) { - /* - * Context reply; report that the command was - * successful! - * - * Also report the xfer mode, if necessary. - */ - xs->error = XS_NOERROR; - xs->status = SCSI_OK; - xs->resid = 0; - goto done; - } - - xs->status = mpt_reply->SCSIStatus; - switch (mpt_reply->IOCStatus) { - case MPI_IOCSTATUS_SCSI_DATA_OVERRUN: - xs->error = XS_DRIVER_STUFFUP; - break; - - case MPI_IOCSTATUS_SCSI_DATA_UNDERRUN: - /* - * Yikes! Tagged queue full comes through this path! - * - * So we'll change it to a status error and anything - * that returns status should probably be a status - * error as well. - */ - xs->resid = xs->datalen - mpt_reply->TransferCount; - if (mpt_reply->SCSIState & - MPI_SCSI_STATE_NO_SCSI_STATUS) { - xs->error = XS_DRIVER_STUFFUP; - break; - } - /* FALLTHROUGH */ - case MPI_IOCSTATUS_SUCCESS: - case MPI_IOCSTATUS_SCSI_RECOVERED_ERROR: - switch (xs->status) { - case SCSI_OK: - xs->resid = 0; - break; - - case SCSI_CHECK: - xs->error = XS_SENSE; - break; - - case SCSI_BUSY: - xs->error = XS_BUSY; - break; - - case SCSI_QUEUE_FULL: - xs->error = XS_TIMEOUT; - xs->retries++; - break; - default: - sc_print_addr(linkp); - mpt_prt(mpt, "invalid status code %d", xs->status); - xs->error = XS_DRIVER_STUFFUP; - break; - } - break; - - case MPI_IOCSTATUS_BUSY: - case MPI_IOCSTATUS_INSUFFICIENT_RESOURCES: - xs->error = XS_BUSY; - break; - - case MPI_IOCSTATUS_SCSI_INVALID_BUS: - case MPI_IOCSTATUS_SCSI_INVALID_TARGETID: - case MPI_IOCSTATUS_SCSI_DEVICE_NOT_THERE: - xs->error = XS_SELTIMEOUT; - break; - - case MPI_IOCSTATUS_SCSI_RESIDUAL_MISMATCH: - xs->error = XS_DRIVER_STUFFUP; - break; - - case MPI_IOCSTATUS_SCSI_TASK_TERMINATED: - xs->error = XS_DRIVER_STUFFUP; - break; - - case MPI_IOCSTATUS_SCSI_TASK_MGMT_FAILED: - /* XXX */ - xs->error = XS_DRIVER_STUFFUP; - break; - - case MPI_IOCSTATUS_SCSI_IOC_TERMINATED: - /* XXX */ - xs->error = XS_DRIVER_STUFFUP; - break; - - case MPI_IOCSTATUS_SCSI_EXT_TERMINATED: - /* XXX This is a bus-reset */ - xs->error = XS_DRIVER_STUFFUP; - break; - - default: - /* XXX unrecognized HBA error */ - xs->error = XS_DRIVER_STUFFUP; - break; - } - - if (mpt_reply->SCSIState & MPI_SCSI_STATE_AUTOSENSE_VALID) { - memcpy(&xs->sense, req->sense_vbuf, - sizeof(xs->sense)); - } else if (mpt_reply->SCSIState & MPI_SCSI_STATE_AUTOSENSE_FAILED) { - /* - * This will cause the scsi layer to issue - * a REQUEST SENSE. - */ - if (xs->status == SCSI_CHECK) - xs->error = XS_BUSY; - } - - done: - /* If IOC done with this requeset, free it up. */ - if (mpt_reply == NULL || (mpt_reply->MsgFlags & 0x80) == 0) - mpt_free_request(mpt, req); - - /* If address reply, give the buffer back to the IOC. */ - if (mpt_reply != NULL) - mpt_free_reply(mpt, (reply << 1)); - - if (xs != NULL) { - xs->flags |= ITSDONE; - scsi_done(xs); - } -} - -int -mpt_run_xfer(struct mpt_softc *mpt, struct scsi_xfer *xs) -{ - struct scsi_link *linkp = xs->sc_link; - struct req_entry *req; - MSG_SCSI_IO_REQUEST *mpt_req; - int error, s; - - s = splbio(); - req = mpt_get_request(mpt); - if (req == NULL) { - /* This should happen very infrequently. */ - xs->error = XS_DRIVER_STUFFUP; - xs->flags |= ITSDONE; - scsi_done(xs); - splx(s); - return (COMPLETE); - } - splx(s); - - /* Link the req and the scsi_xfer. */ - req->xfer = xs; - - /* Now we build the command for the IOC */ - mpt_req = req->req_vbuf; - bzero(mpt_req, sizeof(*mpt_req)); - - mpt_req->Function = MPI_FUNCTION_SCSI_IO_REQUEST; - mpt_req->Bus = mpt->bus; - - mpt_req->SenseBufferLength = - (sizeof(xs->sense) < MPT_SENSE_SIZE) ? - sizeof(xs->sense) : MPT_SENSE_SIZE; - - /* - * We use the message context to find the request structure when - * we get the command completion interrupt from the IOC. - */ - mpt_req->MsgContext = req->index; - - /* Which physical device to do the I/O on. */ - mpt_req->TargetID = linkp->target; - mpt_req->LUN[1] = linkp->lun; - - /* Set the direction of the transfer. */ - if (xs->flags & SCSI_DATA_IN) - mpt_req->Control = MPI_SCSIIO_CONTROL_READ; - else if (xs->flags & SCSI_DATA_OUT) - mpt_req->Control = MPI_SCSIIO_CONTROL_WRITE; - else - mpt_req->Control = MPI_SCSIIO_CONTROL_NODATATRANSFER; - - mpt_check_xfer_settings(mpt, xs, mpt_req); - - /* Copy the SCSI command block into place. */ - memcpy(mpt_req->CDB, xs->cmd, xs->cmdlen); - - mpt_req->CDBLength = xs->cmdlen; - mpt_req->DataLength = xs->datalen; - mpt_req->SenseBufferLowAddr = req->sense_pbuf; - - /* - * Map the DMA transfer. - */ - if (xs->datalen) { - SGE_SIMPLE32 *se; - - error = bus_dmamap_load(mpt->sc_dmat, req->dmap, xs->data, - xs->datalen, NULL, - ((xs->flags & SCSI_NOSLEEP) ? BUS_DMA_NOWAIT - : BUS_DMA_WAITOK) | - BUS_DMA_STREAMING | - ((xs->flags & SCSI_DATA_IN) ? BUS_DMA_READ - : BUS_DMA_WRITE)); - switch (error) { - case 0: - break; - - case ENOMEM: - case EAGAIN: - xs->error = XS_DRIVER_STUFFUP; - goto out_bad; - default: - mpt_prt(mpt, "error %d loading DMA map", error); - out_bad: - s = splbio(); - mpt_free_request(mpt, req); - splx(s); - return (TRY_AGAIN_LATER); - } - - if (req->dmap->dm_nsegs > MPT_NSGL_FIRST(mpt)) { - int seg, i, nleft = req->dmap->dm_nsegs; - uint32_t flags; - SGE_CHAIN32 *ce; - - seg = 0; - - mpt_req->DataLength = xs->datalen; - flags = MPI_SGE_FLAGS_SIMPLE_ELEMENT; - if (xs->flags & SCSI_DATA_OUT) - flags |= MPI_SGE_FLAGS_HOST_TO_IOC; - - se = (SGE_SIMPLE32 *) &mpt_req->SGL; - for (i = 0; i < MPT_NSGL_FIRST(mpt) - 1; - i++, se++, seg++) { - uint32_t tf; - - bzero(se, sizeof(*se)); - se->Address = req->dmap->dm_segs[seg].ds_addr; - MPI_pSGE_SET_LENGTH(se, - req->dmap->dm_segs[seg].ds_len); - tf = flags; - if (i == MPT_NSGL_FIRST(mpt) - 2) - tf |= MPI_SGE_FLAGS_LAST_ELEMENT; - MPI_pSGE_SET_FLAGS(se, tf); - nleft--; - } - - /* - * Tell the IOC where to find the first chain element. - */ - mpt_req->ChainOffset = - ((char *)se - (char *)mpt_req) >> 2; - - /* - * Until we're finished with all segments... - */ - while (nleft) { - int ntodo; - - /* - * Construct the chain element that points to - * the next segment. - */ - ce = (SGE_CHAIN32 *) se++; - if (nleft > MPT_NSGL(mpt)) { - ntodo = MPT_NSGL(mpt) - 1; - ce->NextChainOffset = (MPT_RQSL(mpt) - - sizeof(SGE_SIMPLE32)) >> 2; - ce->Length = MPT_NSGL(mpt) - * sizeof(SGE_SIMPLE32); - } else { - ntodo = nleft; - ce->NextChainOffset = 0; - ce->Length = ntodo - * sizeof(SGE_SIMPLE32); - } - ce->Address = req->req_pbuf + - ((char *)se - (char *)mpt_req); - ce->Flags = MPI_SGE_FLAGS_CHAIN_ELEMENT; - for (i = 0; i < ntodo; i++, se++, seg++) { - uint32_t tf; - - bzero(se, sizeof(*se)); - se->Address = - req->dmap->dm_segs[seg].ds_addr; - MPI_pSGE_SET_LENGTH(se, - req->dmap->dm_segs[seg].ds_len); - tf = flags; - if (i == ntodo - 1) { - tf |= - MPI_SGE_FLAGS_LAST_ELEMENT; - if (ce->NextChainOffset == 0) { - tf |= - MPI_SGE_FLAGS_END_OF_LIST | - MPI_SGE_FLAGS_END_OF_BUFFER; - } - } - MPI_pSGE_SET_FLAGS(se, tf); - nleft--; - } - } - bus_dmamap_sync(mpt->sc_dmat, req->dmap, 0, - req->dmap->dm_mapsize, - (xs->flags & SCSI_DATA_IN) ? BUS_DMASYNC_PREREAD : - BUS_DMASYNC_PREWRITE); - } else { - int i; - uint32_t flags; - - mpt_req->DataLength = xs->datalen; - flags = MPI_SGE_FLAGS_SIMPLE_ELEMENT; - if (xs->flags & SCSI_DATA_OUT) - flags |= MPI_SGE_FLAGS_HOST_TO_IOC; - - /* Copy the segments into our SG list. */ - se = (SGE_SIMPLE32 *) &mpt_req->SGL; - for (i = 0; i < req->dmap->dm_nsegs; - i++, se++) { - uint32_t tf; - - bzero(se, sizeof(*se)); - se->Address = req->dmap->dm_segs[i].ds_addr; - MPI_pSGE_SET_LENGTH(se, - req->dmap->dm_segs[i].ds_len); - tf = flags; - if (i == req->dmap->dm_nsegs - 1) { - tf |= - MPI_SGE_FLAGS_LAST_ELEMENT | - MPI_SGE_FLAGS_END_OF_BUFFER | - MPI_SGE_FLAGS_END_OF_LIST; - } - MPI_pSGE_SET_FLAGS(se, tf); - } - bus_dmamap_sync(mpt->sc_dmat, req->dmap, 0, - req->dmap->dm_mapsize, - (xs->flags & SCSI_DATA_IN) ? BUS_DMASYNC_PREREAD : - BUS_DMASYNC_PREWRITE); - } - } else { - /* - * No data to transfer; just make a single simple SGL - * with zero length. - */ - SGE_SIMPLE32 *se = (SGE_SIMPLE32 *) &mpt_req->SGL; - bzero(se, sizeof(*se)); - MPI_pSGE_SET_FLAGS(se, - (MPI_SGE_FLAGS_LAST_ELEMENT | MPI_SGE_FLAGS_END_OF_BUFFER | - MPI_SGE_FLAGS_SIMPLE_ELEMENT | MPI_SGE_FLAGS_END_OF_LIST)); - } - -#ifdef MPT_DEBUG - if (mpt_debug > 50) - mpt_print_scsi_io_request(mpt_req); -#endif /* MPT_DEBUG */ - - s = splbio(); - - /* Always reset xs->stimeout, lest we timeout_del() with trash */ - timeout_set(&xs->stimeout, mpt_timeout, req); - - if ((xs->flags & SCSI_POLL) == 0) - timeout_add(&xs->stimeout, mstohz(xs->timeout)); - mpt_send_cmd(mpt, req); - splx(s); - - if ((xs->flags & SCSI_POLL) == 0) { - return (SUCCESSFULLY_QUEUED); - } - /* - * If we can't use interrupts, poll on completion. - */ - if (mpt_poll(mpt, xs, xs->timeout)) { - mpt_timeout(req); - /* XXX scsi_done called - return (TRY_AGAIN_LATER); - */ - /* XXX MP this does not look correct */ - return (COMPLETE); - } - - return (COMPLETE); -} - -void -mpt_ctlop(struct mpt_softc *mpt, void *vmsg, uint32_t reply) -{ - MSG_DEFAULT_REPLY *dmsg = vmsg; - - switch (dmsg->Function) { - case MPI_FUNCTION_EVENT_NOTIFICATION: - mpt_event_notify_reply(mpt, vmsg); - mpt_free_reply(mpt, (reply << 1)); - break; - - case MPI_FUNCTION_EVENT_ACK: - mpt_free_reply(mpt, (reply << 1)); - break; - - case MPI_FUNCTION_PORT_ENABLE: - { - MSG_PORT_ENABLE_REPLY *msg = vmsg; - int index = msg->MsgContext & ~0x80000000; - - DNPRINTF(10, "%s: enable port reply index %d\n", - DEVNAME(mpt), index); - - if (index >= 0 && index < MPT_MAX_REQUESTS(mpt)) { - struct req_entry *req = &mpt->request_pool[index]; - req->debug = REQ_DONE; - } - mpt_free_reply(mpt, (reply << 1)); - break; - } - - case MPI_FUNCTION_CONFIG: - { - MSG_CONFIG_REPLY *msg = vmsg; - int index = msg->MsgContext & ~0x80000000; - if (index >= 0 && index < MPT_MAX_REQUESTS(mpt)) { - struct req_entry *req = &mpt->request_pool[index]; - req->debug = REQ_DONE; - req->sequence = reply; - } else - mpt_free_reply(mpt, (reply << 1)); - break; - } - - default: - mpt_prt(mpt, "unknown ctlop: 0x%x", dmsg->Function); - } -} - -void -mpt_event_notify_reply(struct mpt_softc *mpt, MSG_EVENT_NOTIFY_REPLY *msg) -{ - - switch (msg->Event) { - case MPI_EVENT_LOG_DATA: - { - int i; - - /* Some error occurrerd that the Fusion wants logged. */ - mpt_prt(mpt, "EvtLogData: IOCLogInfo: 0x%08x", msg->IOCLogInfo); - mpt_prt(mpt, "EvtLogData: Event Data:"); - for (i = 0; i < msg->EventDataLength; i++) { - if ((i % 4) == 0) - printf("%s:\t", mpt->mpt_dev.dv_xname); - printf("0x%08x%c", msg->Data[i], - ((i % 4) == 3) ? '\n' : ' '); - } - if ((i % 4) != 0) - printf("\n"); - break; - } - - case MPI_EVENT_UNIT_ATTENTION: - mpt_prt(mpt, "Unit Attn: Bus 0x%02x Target 0x%02x", - (msg->Data[0] >> 8) & 0xff, msg->Data[0] & 0xff); - break; - - case MPI_EVENT_IOC_BUS_RESET: - /* We generated a bus reset. */ - mpt_prt(mpt, "IOC Bus Reset Port %d", - (msg->Data[0] >> 8) & 0xff); - break; - - case MPI_EVENT_EXT_BUS_RESET: - /* Someone else generated a bus reset. */ - mpt_prt(mpt, "External Bus Reset"); - /* - * These replies don't return EventData like the MPI - * spec says they do. - */ - /* XXX Send an async event? */ - break; - - case MPI_EVENT_RESCAN: - /* - * In general, thise means a device has been added - * to the loop. - */ - mpt_prt(mpt, "Rescan Port %d", (msg->Data[0] >> 8) & 0xff); - /* XXX Send an async event? */ - break; - - case MPI_EVENT_LINK_STATUS_CHANGE: - mpt_prt(mpt, "Port %d: Link state %s", - (msg->Data[1] >> 8) & 0xff, - (msg->Data[0] & 0xff) == 0 ? "Failed" : "Active"); - break; - - case MPI_EVENT_LOOP_STATE_CHANGE: - switch ((msg->Data[0] >> 16) & 0xff) { - case 0x01: - mpt_prt(mpt, - "Port %d: FC Link Event: LIP(%02x,%02x) " - "(Loop Initialization)", - (msg->Data[1] >> 8) & 0xff, - (msg->Data[0] >> 8) & 0xff, - (msg->Data[0] ) & 0xff); - switch ((msg->Data[0] >> 8) & 0xff) { - case 0xf7: - if ((msg->Data[0] & 0xff) == 0xf7) - mpt_prt(mpt, "\tDevice needs AL_PA"); - else - mpt_prt(mpt, "\tDevice %02x doesn't " - "like FC performance", - msg->Data[0] & 0xff); - break; - - case 0xf8: - if ((msg->Data[0] & 0xff) == 0xf7) - mpt_prt(mpt, "\tDevice detected loop " - "failure before acquiring AL_PA"); - else - mpt_prt(mpt, "\tDevice %02x detected " - "loop failure", - msg->Data[0] & 0xff); - break; - - default: - mpt_prt(mpt, "\tDevice %02x requests that " - "device %02x reset itself", - msg->Data[0] & 0xff, - (msg->Data[0] >> 8) & 0xff); - break; - } - break; - - case 0x02: - mpt_prt(mpt, "Port %d: FC Link Event: LPE(%02x,%02x) " - "(Loop Port Enable)", - (msg->Data[1] >> 8) & 0xff, - (msg->Data[0] >> 8) & 0xff, - (msg->Data[0] ) & 0xff); - break; - - case 0x03: - mpt_prt(mpt, "Port %d: FC Link Event: LPB(%02x,%02x) " - "(Loop Port Bypass)", - (msg->Data[1] >> 8) & 0xff, - (msg->Data[0] >> 8) & 0xff, - (msg->Data[0] ) & 0xff); - break; - - default: - mpt_prt(mpt, "Port %d: FC Link Event: " - "Unknown event (%02x %02x %02x)", - (msg->Data[1] >> 8) & 0xff, - (msg->Data[0] >> 16) & 0xff, - (msg->Data[0] >> 8) & 0xff, - (msg->Data[0] ) & 0xff); - break; - } - break; - - case MPI_EVENT_LOGOUT: - mpt_prt(mpt, "Port %d: FC Logout: N_PortID: %02x", - (msg->Data[1] >> 8) & 0xff, msg->Data[0]); - break; - - case MPI_EVENT_EVENT_CHANGE: - /* - * This is just an acknowledgement of our - * mpt_send_event_request(). - */ - break; - - default: - mpt_prt(mpt, "Unknown async event: 0x%x", msg->Event); - break; - } - - if (msg->AckRequired) { - MSG_EVENT_ACK *ackp; - struct req_entry *req; - - if ((req = mpt_get_request(mpt)) == NULL) { - /* XXX XXX XXX XXXJRT */ - panic("mpt_event_notify_reply: unable to allocate " - "request structure"); - } - - ackp = (MSG_EVENT_ACK *) req->req_vbuf; - bzero(ackp, sizeof(*ackp)); - ackp->Function = MPI_FUNCTION_EVENT_ACK; - ackp->Event = msg->Event; - ackp->EventContext = msg->EventContext; - ackp->MsgContext = req->index | 0x80000000; - mpt_check_doorbell(mpt); - mpt_send_cmd(mpt, req); - } -} - -void -mpt_check_xfer_settings(struct mpt_softc *mpt, struct scsi_xfer *xs, MSG_SCSI_IO_REQUEST *mpt_req) -{ - if (mpt->is_fc) { - /* - * SCSI transport settings don't make any sense for - * Fibre Channel; silently ignore the request. - */ - return; - } - - /* - * XXX never do these commands with tags. Should really be - * in a higher layer. - */ - if (xs->cmd->opcode == INQUIRY || - xs->cmd->opcode == TEST_UNIT_READY || - xs->cmd->opcode == REQUEST_SENSE) - return; - - /* Set the queue behavior. */ - if (mpt->is_fc || (mpt->mpt_tag_enable & (1 << xs->sc_link->target))) { - mpt_req->Control |= MPI_SCSIIO_CONTROL_SIMPLEQ; - } else { - mpt_req->Control |= MPI_SCSIIO_CONTROL_UNTAGGED; - mpt_req->Control |= MPI_SCSIIO_CONTROL_NO_DISCONNECT; - } -} - -/***************************************************************************** - * SCSI interface routines - *****************************************************************************/ - -int -mpt_action(struct scsi_xfer *xfer) -{ - struct mpt_softc *mpt = (void *) xfer->sc_link->adapter_softc; - int ret; - - ret = mpt_run_xfer(mpt, xfer); - - return ret; -} - -void -mpt_minphys(struct buf *bp) -{ - -/* - * Subtract one from the SGL limit, since we need an extra one to handle - * an non-page-aligned transfer. - */ -#define MPT_MAX_XFER ((MPT_SGL_MAX - 1) * PAGE_SIZE) - - if (bp->b_bcount > MPT_MAX_XFER) - bp->b_bcount = MPT_MAX_XFER; - minphys(bp); -} - -/* - * Allocate DMA resources for FW image - * - * img_sz : size of image - * maxsgl : maximum number of DMA segments - */ -int -mpt_alloc_fw_mem(struct mpt_softc *mpt, int maxsgl) -{ - int error, rseg; - - error = bus_dmamap_create(mpt->sc_dmat, mpt->fw_image_size, maxsgl, - mpt->fw_image_size, 0, 0, &mpt->fw_dmap); - if (error) { - mpt_prt(mpt, "unable to create request DMA map, error = %d", - error); - return (error); - } - - error = bus_dmamem_alloc(mpt->sc_dmat, mpt->fw_image_size, PAGE_SIZE, 0, - &mpt->fw_seg, 1, &rseg, 0); - if (error) { - mpt_prt(mpt, "unable to allocate fw memory, error = %d", error); - goto destroy; - } - - error = bus_dmamem_map(mpt->sc_dmat, &mpt->fw_seg, 1, - mpt->fw_image_size, (caddr_t *)&mpt->fw, BUS_DMA_COHERENT); - if (error) { - mpt_prt(mpt, "unable to map fw area, error = %d", error); - goto free; - } - - error = bus_dmamap_load(mpt->sc_dmat, mpt->fw_dmap, mpt->fw, - mpt->fw_image_size, NULL, 0); - if (error) { - mpt_prt(mpt, "unable to load request DMA map, error = %d", - error); - goto unmap; - } - - return(error); - -unmap: - bus_dmamem_unmap(mpt->sc_dmat, (caddr_t)mpt->fw, mpt->fw_image_size); -free: - bus_dmamem_free(mpt->sc_dmat, &mpt->fw_seg, 1); -destroy: - bus_dmamap_destroy(mpt->sc_dmat, mpt->fw_dmap); - - mpt->fw = NULL; - bzero(&mpt->fw_seg, sizeof(mpt->fw_seg)); - - return (error); -} - -void -mpt_free_fw_mem(struct mpt_softc *mpt) -{ - bus_dmamap_unload(mpt->sc_dmat, mpt->fw_dmap); - bus_dmamem_unmap(mpt->sc_dmat, (caddr_t)mpt->fw, mpt->fw_image_size); - bus_dmamem_free(mpt->sc_dmat, &mpt->fw_seg, 1); - bus_dmamap_destroy(mpt->sc_dmat, mpt->fw_dmap); -} diff --git a/sys/dev/ic/mpt_openbsd.h b/sys/dev/ic/mpt_openbsd.h deleted file mode 100644 index b032693c790..00000000000 --- a/sys/dev/ic/mpt_openbsd.h +++ /dev/null @@ -1,356 +0,0 @@ -/* $OpenBSD: mpt_openbsd.h,v 1.20 2006/02/04 19:05:00 marco Exp $ */ -/* $NetBSD: mpt_netbsd.h,v 1.2 2003/04/16 23:02:14 thorpej Exp $ */ - -/* - * Copyright (c) 2004 Milos Urbanek - * All rights reserved. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * - * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND - * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE - * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE FOR - * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS - * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) - * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT - * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY - * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF - * SUCH DAMAGE. - */ - -/* - * Copyright (c) 2003 Wasabi Systems, Inc. - * All rights reserved. - * - * Written by Jason R. Thorpe for Wasabi Systems, Inc. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * 3. All advertising materials mentioning features or use of this software - * must display the following acknowledgement: - * This product includes software developed for the NetBSD Project by - * Wasabi Systems, Inc. - * 4. The name of Wasabi Systems, Inc. may not be used to endorse - * or promote products derived from this software without specific prior - * written permission. - * - * THIS SOFTWARE IS PROVIDED BY WASABI SYSTEMS, INC. ``AS IS'' AND - * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED - * TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR - * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL WASABI SYSTEMS, INC - * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR - * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF - * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS - * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN - * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) - * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE - * POSSIBILITY OF SUCH DAMAGE. - */ - -/* - * Copyright (c) 2000, 2001 by Greg Ansley, Adam Prewett - * - * Partially derived from Matt Jacobs ISP driver. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * 1. Redistributions of source code must retain the above copyright - * notice immediately at the beginning of the file, without modification, - * this list of conditions, and the following disclaimer. - * 2. The name of the author may not be used to endorse or promote products - * derived from this software without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND - * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE - * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE FOR - * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS - * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) - * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT - * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY - */ -/* - * Additional Copyright (c) 2002 by Matthew Jacob under same license. - */ - -/* - * mpt_openbsd.h: - * - * OpenBSD-specific definitions for LSI Fusion adapters. - * - * Adapted from the NetBSD "mpt" driver by Milos Urbanek for - * ZOOM International, s.r.o. - */ - -#ifndef _DEV_IC_MPT_OPENBSD_H_ -#define _DEV_IC_MPT_OPENBSD_H_ - -#include <sys/param.h> -#include <sys/systm.h> -#include <sys/malloc.h> -#include <sys/device.h> -#include <sys/ioctl.h> -#include <sys/kernel.h> -#include <sys/timeout.h> -#include <sys/errno.h> -#include <sys/buf.h> -#include <sys/queue.h> - -#include <uvm/uvm_extern.h> - -#include <machine/bus.h> -#include <machine/intr.h> - -#include <scsi/scsi_all.h> -#include <scsi/scsiconf.h> - -#include <dev/ic/mpt_mpilib.h> - -/* - * macro to convert from milliseconds to hz without integer overflow - * Default version using only 32bits arithmetics. - * 64bit port can define 64bit version in their <machine/param.h> - * 0x20000 is safe for hz < 20000 - */ -#ifndef mstohz -#define mstohz(ms) \ - (((ms +0u) / 1000u) * hz) -#endif - -/* Max MPT Reply we are willing to accept (must be a power of 2). */ -#define MPT_REPLY_SIZE 128 - -#define MPT_MAX_REQUESTS(mpt) ((mpt)->is_fc ? 1024 : 256) -#define MPT_REQUEST_AREA 512 -#define MPT_SENSE_SIZE 32 /* included in MPT_REQUEST_AREA */ -#define MPT_REQ_MEM_SIZE(mpt) (MPT_MAX_REQUESTS(mpt) * MPT_REQUEST_AREA) - -/* - * We cannot tell prior to getting IOC facts how big the IOC's request - * area is. Because of this we cannot tell at compile time how many - * simple SG elements we can fit within an IOC request prior to having - * to put in a chain element. - * - * Experimentally we know that the Ultra4 parts have a 96 byte request - * element size and the Fibre Channel units have a 144 byte request - * element size. Therefore, if we have 512-32 (== 480) bytes of request - * area to play with, we have room for between 3 and 5 request sized - * regions- the first of which is the command plus a simple SG list, - * the rest of which are chained continuation SG lists. Given that the - * normal request we use is 48 bytes w/o the first SG element, we can - * assume we have 480-48 == 432 bytes to have simple SG elements and/or - * chain elements. If we assume 32 bit addressing, this works out to - * 54 SG or chain elements. If we assume 5 chain elements, then we have - * a maximum of 49 seperate actual SG segments. - */ -#define MPT_SGL_MAX 49 - -#define MPT_RQSL(mpt) ((mpt)->request_frame_size << 2) -#define MPT_NSGL(mpt) (MPT_RQSL(mpt) / sizeof(SGE_SIMPLE32)) - -#define MPT_NSGL_FIRST(mpt) \ - ((((mpt)->request_frame_size << 2) - \ - sizeof(MSG_SCSI_IO_REQUEST) - \ - sizeof(SGE_IO_UNION)) / sizeof(SGE_SIMPLE32)) - -/* - * Convert a physical address returned from IOC to a virtual address - * needed to access the data. - */ -#define MPT_REPLY_PTOV(m, x) \ - ((void *)(&(m)->reply[(((x) << 1) - (m)->reply_phys)])) - -enum mpt_req_state { - REQ_FREE, - REQ_IN_PROGRESS, - REQ_TIMEOUT, - REQ_ON_CHIP, - REQ_DONE -}; - -struct req_entry { - uint16_t index; /* index of this entry */ - struct scsi_xfer *xfer; /* scsipi xfer request */ - void *req_vbuf; /* virtual address of entry */ - void *sense_vbuf; /* virtual address of sense data */ - bus_addr_t req_pbuf; /* physical address of entry */ - bus_addr_t sense_pbuf; /* physical address of sense data */ - bus_dmamap_t dmap; /* DMA map for data buffer */ - SLIST_ENTRY(req_entry) link; /* pointer to next in list */ - enum mpt_req_state debug; /* debugging */ - uint32_t sequence; /* sequence number */ -}; - -struct mpt_softc { - struct device mpt_dev; /* base device glue */ - - int is_fc; - int bus; - - /* IOC facts */ - uint16_t mpt_global_credits; - uint16_t request_frame_size; - uint8_t mpt_max_devices; - uint8_t mpt_max_buses; - uint8_t fw_download_boot; - uint32_t fw_image_size; - uint32_t im_support; - - /* Port facts */ - uint16_t mpt_ini_id; - - /* Device configuration information */ - struct { - struct mpt_spi_cfg { - CONFIG_PAGE_SCSI_PORT_0 _port_page0; - CONFIG_PAGE_SCSI_PORT_1 _port_page1; - CONFIG_PAGE_SCSI_PORT_2 _port_page2; - CONFIG_PAGE_SCSI_DEVICE_0 _dev_page0[16]; - CONFIG_PAGE_SCSI_DEVICE_1 _dev_page1[16]; - uint16_t _negotiated_speed[16]; - uint16_t _tag_enable; - uint16_t _disc_enable; - uint16_t _update_params0; - uint16_t _update_params1; - uint16_t _report_xfer_mode; - } spi; -#define mpt_port_page0 cfg.spi._port_page0 -#define mpt_port_page1 cfg.spi._port_page1 -#define mpt_port_page2 cfg.spi._port_page2 -#define mpt_dev_page0 cfg.spi._dev_page0 -#define mpt_dev_page1 cfg.spi._dev_page1 -#define mpt_negotiated_speed cfg.spi._negotiated_speed -#define mpt_tag_enable cfg.spi._tag_enable -#define mpt_disc_enable cfg.spi._disc_enable -#define mpt_update_params0 cfg.spi._update_params0 -#define mpt_update_params1 cfg.spi._update_params1 -#define mpt_report_xfer_mode cfg.spi._report_xfer_mode - - struct mpt_fc_cfg { - uint8_t nada; - } fc; - - struct mpt_mfg_cfg { - CONFIG_PAGE_MANUFACTURING_0 _mfg_page0; - CONFIG_PAGE_MANUFACTURING_1 _mfg_page1; - CONFIG_PAGE_MANUFACTURING_2 _mfg_page2; - CONFIG_PAGE_MANUFACTURING_3 _mfg_page3; - CONFIG_PAGE_MANUFACTURING_4 _mfg_page4; - } mfg; -#define mpt_mfg_page0 cfg.mfg._mfg_page0 -#define mpt_mfg_page1 cfg.mfg._mfg_page1 -#define mpt_mfg_page2 cfg.mfg._mfg_page2 -#define mpt_mfg_page3 cfg.mfg._mfg_page3 -#define mpt_mfg_page4 cfg.mfg._mfg_page4 - - struct mpt_iou_cfg { - CONFIG_PAGE_IO_UNIT_0 _iou_page0; - CONFIG_PAGE_IO_UNIT_1 _iou_page1; - CONFIG_PAGE_IO_UNIT_2 _iou_page2; - CONFIG_PAGE_IO_UNIT_3 _iou_page3; - } iou; -#define mpt_iou_page0 cfg.iou._iou_page0 -#define mpt_iou_page1 cfg.iou._iou_page1 -#define mpt_iou_page2 cfg.iou._iou_page2 -#define mpt_iou_page3 cfg.iou._iou_page3 - - struct mpt_ioc_cfg { - CONFIG_PAGE_IOC_0 _ioc_page0; - CONFIG_PAGE_IOC_1 _ioc_page1; - CONFIG_PAGE_IOC_2 _ioc_page2; - CONFIG_PAGE_IOC_3 _ioc_page3; - CONFIG_PAGE_IOC_4 _ioc_page4; - } ioc; -#define mpt_ioc_page0 cfg.ioc._ioc_page0 -#define mpt_ioc_page1 cfg.ioc._ioc_page1 -#define mpt_ioc_page2 cfg.ioc._ioc_page2 -#define mpt_ioc_page3 cfg.ioc._ioc_page3 -#define mpt_ioc_page4 cfg.ioc._ioc_page4 - - struct mpt_raid_cfg { - CONFIG_PAGE_RAID_VOL_0 _raidvol_page0; - CONFIG_PAGE_RAID_PHYS_DISK_0 _raidphys_page0; - } raid; -#define mpt_raidvol_page0 cfg.raid._raidvol_page0 -#define mpt_raidphys_page0 cfg.raid._raidphys_page0 - } cfg; - - bus_space_tag_t sc_st; - bus_space_handle_t sc_sh; - bus_dma_tag_t sc_dmat; - - /* Reply memory */ - bus_dmamap_t reply_dmap; - char *reply; - bus_addr_t reply_phys; - - /* Request memory */ - bus_dmamap_t request_dmap; - char *request; - bus_addr_t request_phys; - - /* scsi linkage */ - struct req_entry *request_pool; - SLIST_HEAD(req_queue, req_entry) request_free_list; - - struct scsi_link sc_link; - struct scsi_adapter sc_adapter; - - uint32_t sequence; /* sequence number */ - uint32_t timeouts; /* timeout count */ - uint32_t success; /* success after timeout */ - - uint8_t vmware; /* If set, running in vmware */ - uint8_t upload_fw; /* If set, do a fw upload */ - /* Firmware memory */ - bus_dmamap_t fw_dmap; - bus_dma_segment_t fw_seg; - char *fw; - - /* Companion part in a 929 or 1030, or NULL. */ - struct mpt_softc *mpt2; - - /* To restore configuration after hard reset. */ - void (*sc_set_config_regs)(struct mpt_softc *); -}; - -#define MPT_SYNC_REQ(mpt, req, ops) \ - bus_dmamap_sync((mpt)->sc_dmat, (mpt)->request_dmap, \ - (req)->req_pbuf - (mpt)->request_phys, \ - MPT_REQUEST_AREA, (ops)) - -#define mpt_read(mpt, reg) \ - bus_space_read_4((mpt)->sc_st, (mpt)->sc_sh, (reg)) -#define mpt_write(mpt, reg, val) \ - bus_space_write_4((mpt)->sc_st, (mpt)->sc_sh, (reg), (val)) - -void mpt_attach(struct mpt_softc *); -int mpt_dma_mem_alloc(struct mpt_softc *); -int mpt_intr(void *); -void mpt_prt(struct mpt_softc *, const char *, ...); - - -#define mpt_set_config_regs(mpt) \ -do { \ - if ((mpt)->sc_set_config_regs != NULL) \ - (*(mpt)->sc_set_config_regs)((mpt)); \ -} while (/*CONSTCOND*/0) - -#endif /* _DEV_IC_MPT_OPENBSD_H_ */ diff --git a/sys/dev/pci/files.pci b/sys/dev/pci/files.pci index 53c10beb5bb..33ccc6a66a6 100644 --- a/sys/dev/pci/files.pci +++ b/sys/dev/pci/files.pci @@ -1,4 +1,4 @@ -# $OpenBSD: files.pci,v 1.208 2006/06/26 04:57:54 brad Exp $ +# $OpenBSD: files.pci,v 1.209 2006/06/29 22:14:41 dlg Exp $ # $NetBSD: files.pci,v 1.20 1996/09/24 17:47:15 christos Exp $ # # Config file and device description for machine-independent PCI code. @@ -188,10 +188,6 @@ file dev/pci/ciss_pci.c ciss_pci attach isp at pci with isp_pci file dev/pci/isp_pci.c isp_pci -# LSILogic Fusion-MPT I/O Processor SCSI/FC family -attach mpt at pci with mpt_pci -file dev/pci/mpt_pci.c mpt_pci - # LSI Logic Fusion-MPT Message Passing Interface attach mpi at pci with mpi_pci file dev/pci/mpi_pci.c mpi_pci diff --git a/sys/dev/pci/mpt_pci.c b/sys/dev/pci/mpt_pci.c deleted file mode 100644 index 930815cdb49..00000000000 --- a/sys/dev/pci/mpt_pci.c +++ /dev/null @@ -1,331 +0,0 @@ -/* $OpenBSD: mpt_pci.c,v 1.13 2006/05/31 03:38:32 dlg Exp $ */ -/* $NetBSD: mpt_pci.c,v 1.2 2003/07/14 15:47:26 lukem Exp $ */ - -/* - * Copyright (c) 2004 Milos Urbanek - * All rights reserved. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * - * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND - * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE - * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE FOR - * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS - * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) - * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT - * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY - * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF - * SUCH DAMAGE. - */ - -/* - * Copyright (c) 2003 Wasabi Systems, Inc. - * All rights reserved. - * - * Written by Jason R. Thorpe for Wasabi Systems, Inc. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * 3. All advertising materials mentioning features or use of this software - * must display the following acknowledgement: - * This product includes software developed for the NetBSD Project by - * Wasabi Systems, Inc. - * 4. The name of Wasabi Systems, Inc. may not be used to endorse - * or promote products derived from this software without specific prior - * written permission. - * - * THIS SOFTWARE IS PROVIDED BY WASABI SYSTEMS, INC. ``AS IS'' AND - * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED - * TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR - * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL WASABI SYSTEMS, INC - * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR - * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF - * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS - * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN - * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) - * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE - * POSSIBILITY OF SUCH DAMAGE. - */ - -#include <dev/ic/mpt.h> /* pulls in all headers */ - -#include <dev/pci/pcireg.h> -#include <dev/pci/pcivar.h> -#include <dev/pci/pcidevs.h> - -#define MPT_PCI_MMBA (PCI_MAPREG_START+0x04) -#define PCI_MAPREG_ROM 0x30 - -void mpt_pci_attach(struct device *, struct device *, void *); -int mpt_pci_match(struct device *, void *, void *); -const struct mpt_pci_product *mpt_pci_lookup(const struct pci_attach_args *); - -struct mpt_pci_softc { - struct mpt_softc sc_mpt; - - pci_chipset_tag_t sc_pc; - pcitag_t sc_tag; - - void *sc_ih; - - /* Saved volatile PCI configuration registers. */ - pcireg_t sc_pci_csr; - pcireg_t sc_pci_bhlc; - pcireg_t sc_pci_io_bar; - pcireg_t sc_pci_mem0_bar[2]; - pcireg_t sc_pci_mem1_bar[2]; - pcireg_t sc_pci_rom_bar; - pcireg_t sc_pci_int; - pcireg_t sc_pci_pmcsr; -}; - -void mpt_pci_link_peer(struct mpt_softc *); -void mpt_pci_read_config_regs(struct mpt_softc *); -void mpt_pci_set_config_regs(struct mpt_softc *); - -struct cfattach mpt_pci_ca = { - sizeof (struct mpt_pci_softc), mpt_pci_match, mpt_pci_attach, -}; - -#define PREAD(s, r) pci_conf_read((s)->sc_pc, (s)->sc_tag, (r)) -#define PWRITE(s, r, v) pci_conf_write((s)->sc_pc, (s)->sc_tag, (r), (v)) - -#define MPP_F_FC 0x01 /* Fibre Channel adapter */ -#define MPP_F_DUAL 0x02 /* Dual port adapter */ - -static const struct mpt_pci_product { - pci_vendor_id_t mpp_vendor; - pci_product_id_t mpp_product; - int mpp_flags; -} mpt_pci_products[] = { - { PCI_VENDOR_SYMBIOS, PCI_PRODUCT_SYMBIOS_1030, - MPP_F_DUAL }, - { PCI_VENDOR_SYMBIOS, PCI_PRODUCT_SYMBIOS_FC909, - MPP_F_FC }, - { PCI_VENDOR_SYMBIOS, PCI_PRODUCT_SYMBIOS_FC909A, - MPP_F_FC }, - { PCI_VENDOR_SYMBIOS, PCI_PRODUCT_SYMBIOS_FC929, - MPP_F_FC | MPP_F_DUAL }, - { PCI_VENDOR_SYMBIOS, PCI_PRODUCT_SYMBIOS_FC929_1, - MPP_F_FC | MPP_F_DUAL }, - { PCI_VENDOR_SYMBIOS, PCI_PRODUCT_SYMBIOS_FC919, - MPP_F_FC }, - { PCI_VENDOR_SYMBIOS, PCI_PRODUCT_SYMBIOS_FC919_1, - MPP_F_FC }, - { 0, 0, - 0 } -}; - -const struct mpt_pci_product * -mpt_pci_lookup(const struct pci_attach_args *pa) -{ - const struct mpt_pci_product *mpp; - - for (mpp = mpt_pci_products; mpp->mpp_vendor != 0; mpp++) { - if (PCI_VENDOR(pa->pa_id) == mpp->mpp_vendor && - PCI_PRODUCT(pa->pa_id) == mpp->mpp_product) - return (mpp); - } - return (NULL); -} - -/* probe for mpt controller */ -int -mpt_pci_match(struct device *parent, void *match, void *aux) -{ - struct pci_attach_args *pa = aux; - - if (mpt_pci_lookup(pa) != NULL) - return (2); - - return (0); -} - -void -mpt_pci_attach(struct device *parent, struct device *self, void *aux) -{ - struct mpt_pci_softc *psc = (void *)self; - struct mpt_softc *mpt = &psc->sc_mpt; - struct pci_attach_args *pa = aux; - const struct mpt_pci_product *mpp; - pci_intr_handle_t ih; - const char *intrstr; - pcireg_t memtype; - - mpp = mpt_pci_lookup(pa); - if (mpp == NULL) { - printf(": mpt_pci_lookup failed\n"); - return; - } - - psc->sc_pc = pa->pa_pc; - psc->sc_tag = pa->pa_tag; - - mpt->sc_dmat = pa->pa_dmat; - mpt->sc_set_config_regs = mpt_pci_set_config_regs; - - /* Map the device. */ - memtype = pci_mapreg_type(pa->pa_pc, pa->pa_tag, MPT_PCI_MMBA); - if (memtype != (PCI_MAPREG_TYPE_MEM | PCI_MAPREG_MEM_TYPE_32BIT) && - memtype != (PCI_MAPREG_TYPE_MEM | PCI_MAPREG_MEM_TYPE_64BIT)) { - printf(": incorrect memory map type\n"); - return; - } - - if (pci_mapreg_map(pa, MPT_PCI_MMBA, memtype, 0, &mpt->sc_st, - &mpt->sc_sh, NULL, NULL, 0) != 0) { - printf(": unable to map device registers\n"); - return; - } - - /* Ensure that the ROM is disabled. */ - PWRITE(psc, PCI_MAPREG_ROM, PREAD(psc, PCI_MAPREG_ROM & ~1)); - - /* Map and establish our interrupt. */ - if (pci_intr_map(pa, &ih) != 0) { - printf(": unable to map interrupt\n"); - return; - } - intrstr = pci_intr_string(pa->pa_pc, ih); - psc->sc_ih = pci_intr_establish(pa->pa_pc, ih, IPL_BIO, mpt_intr, mpt, - mpt->mpt_dev.dv_xname); - if (psc->sc_ih == NULL) { - printf(": unable to establish interrupt%s%s\n", - intrstr != NULL ? " at " : "", - intrstr != NULL ? intrstr : ""); - return; - } - - /* Disable interrupts on the part. */ - mpt_disable_ints(mpt); - - /* Allocate DMA memory. */ - if (mpt_dma_mem_alloc(mpt) != 0) { - printf(": unable to allocate DMA memory\n"); - return; - } - - printf(": %s\n", intrstr ? intrstr : "?"); - - /* - * Save the PCI config register values. - * - * Hard resets are known to screw up the BAR for diagnostic - * memory accesses (Mem1). - * - * Using Mem1 is known to make the chip stop responding to - * configuration cycles, so we need to save it now. - */ - mpt_pci_read_config_regs(mpt); - - /* - * If we're a dual-port adapter, try to find our peer. We - * need to fix its PCI config registers too. - */ - if (mpp->mpp_flags & MPP_F_DUAL) - mpt_pci_link_peer(mpt); - - /* Initialize the hardware. */ - if (mpt_init(mpt, MPT_DB_INIT_HOST) != 0) { - /* Error message already printed. */ - return; - } - - /* Complete attachment of hardware, include subdevices. */ - mpt_attach(mpt); -} - -/* - * Find and remember our peer PCI function on a dual-port device. - */ -void -mpt_pci_link_peer(struct mpt_softc *mpt) -{ - extern struct cfdriver mpt_cd; - - struct mpt_pci_softc *peer_psc, *psc = (void *)mpt; - struct device *dev; - int unit, b, d, f, peer_b, peer_d, peer_f; - - pci_decompose_tag(psc->sc_pc, psc->sc_tag, &b, &d, &f); - - for (unit = 0; unit < mpt_cd.cd_ndevs; unit++) { - if (unit == mpt->mpt_dev.dv_unit) - continue; - dev = device_lookup(&mpt_cd, unit); - if (dev == NULL) - continue; - if (dev->dv_cfdata == NULL) - continue; - if (dev->dv_cfdata->cf_attach != &mpt_pci_ca) - continue; - peer_psc = (void *)dev; - if (peer_psc->sc_pc != psc->sc_pc) - continue; - pci_decompose_tag(peer_psc->sc_pc, peer_psc->sc_tag, - &peer_b, &peer_d, &peer_f); - if (peer_b == b && peer_d == d) { - DNPRINTF(10, "%s: linking with peer: %s", - DEVNAME(mpt), - peer_psc->sc_mpt.mpt_dev.dv_xname); - mpt->mpt2 = (struct mpt_softc *)peer_psc; - peer_psc->sc_mpt.mpt2 = mpt; - return; - } - } -} - -/* - * Save the volatile PCI configuration registers. - */ -void -mpt_pci_read_config_regs(struct mpt_softc *mpt) -{ - struct mpt_pci_softc *psc = (void *)mpt; - - psc->sc_pci_csr = PREAD(psc, PCI_COMMAND_STATUS_REG); - psc->sc_pci_bhlc = PREAD(psc, PCI_BHLC_REG); - psc->sc_pci_io_bar = PREAD(psc, PCI_MAPREG_START); - psc->sc_pci_mem0_bar[0] = PREAD(psc, PCI_MAPREG_START+0x04); - psc->sc_pci_mem0_bar[1] = PREAD(psc, PCI_MAPREG_START+0x08); - psc->sc_pci_mem1_bar[0] = PREAD(psc, PCI_MAPREG_START+0x0c); - psc->sc_pci_mem1_bar[1] = PREAD(psc, PCI_MAPREG_START+0x10); - psc->sc_pci_rom_bar = PREAD(psc, PCI_MAPREG_ROM); - psc->sc_pci_int = PREAD(psc, PCI_INTERRUPT_REG); - psc->sc_pci_pmcsr = PREAD(psc, 0x44); -} - -/* - * Restore the volatile PCI configuration registers. - */ -void -mpt_pci_set_config_regs(struct mpt_softc *mpt) -{ - struct mpt_pci_softc *psc = (void *)mpt; - - PWRITE(psc, PCI_COMMAND_STATUS_REG, psc->sc_pci_csr); - PWRITE(psc, PCI_BHLC_REG, psc->sc_pci_bhlc); - PWRITE(psc, PCI_MAPREG_START, psc->sc_pci_io_bar); - PWRITE(psc, PCI_MAPREG_START+0x04, psc->sc_pci_mem0_bar[0]); - PWRITE(psc, PCI_MAPREG_START+0x08, psc->sc_pci_mem0_bar[1]); - PWRITE(psc, PCI_MAPREG_START+0x0c, psc->sc_pci_mem1_bar[0]); - PWRITE(psc, PCI_MAPREG_START+0x10, psc->sc_pci_mem1_bar[1]); - PWRITE(psc, PCI_MAPREG_ROM, psc->sc_pci_rom_bar); - PWRITE(psc, PCI_INTERRUPT_REG, psc->sc_pci_int); - PWRITE(psc, 0x44, psc->sc_pci_pmcsr); -} |