diff options
Diffstat (limited to 'usr.bin/vim/version.c')
| -rw-r--r-- | usr.bin/vim/version.c | 178 |
1 files changed, 172 insertions, 6 deletions
diff --git a/usr.bin/vim/version.c b/usr.bin/vim/version.c index 18a45015bd2..8c599644fe9 100644 --- a/usr.bin/vim/version.c +++ b/usr.bin/vim/version.c @@ -1,4 +1,4 @@ -/* $OpenBSD: version.c,v 1.1 1996/09/07 21:40:24 downsj Exp $ */ +/* $OpenBSD: version.c,v 1.2 1996/09/21 06:23:25 downsj Exp $ */ /* vi:set ts=4 sw=4: * * VIM - Vi IMproved by Bram Moolenaar @@ -16,9 +16,173 @@ * It has been changed beyond recognition since then. * * All the remarks about older versions have been removed, they are not very - * interesting. Differences between version 3.0 and 4.0 can be found in + * interesting. Differences between version 3.0 and 4.x can be found in * "../doc/vim_40.txt". * + * Changes between version 4.3 BETA and 4.4 BETA: + * - Moved outputting newline from getout() to mch_windexit(). Helps when + * switching display pages in xterm after an error message for ":!". + * - Fixed problem: Not executing BufEnter autocommands for first buffer. + * - Fixed Makefile: "make shadow" didn't make ctags and xxd directories. Now + * passes CC and CFLAGS to ctags and xxd makefiles. + * - Removed use of #elif, some old compilers don't understand it. + * - Included version 1.4 of ctags. New Makefile.bcc, supports wildcards for + * 16 bit DOS version. + * - Fixed mouse positioning in wrong column for MSDOS 16 and 32 bit versions. + * - Fixed: Delay in updating Visual area when using "/pat". + * - Fixed: With some shells gvim could be killed with CTRL-C in the shell + * where it was started. + * - Fixed: For abbreviations entered with ":noreab" only the first two + * characters were not re-mapped instead of all. + * - Added help tags for search pattern special characters. Adjusted + * doctags.c to insert a backslash before a backslash. + * - Fixed Vi incompatibility: If the rhs of a mapping starts with the lhs, + * remapping is only disabled for the first character, not the whole lhs. + * - Fixed: Default padding character was a space, which caused trouble on + * some systems. Now it's a NUL. + * - Fixed: With GUI Athena the scrollbar could get stuck at the bottom. + * - Fixed: When using :imenu to insert more than one line of text, only the + * first line could be undone. + * - Fixed: Word completion (CTRL-N) in Insert mode, when there was not + * matching word, the "Pattern not found" message was not shown. + * - Fixed: Pattern completion (CTRL-X I) in Insert mode; the file name shown + * was overwritten with the mode message. + * - Added ":if" and ":endif" commands. Everything in between them is + * ingored. Just to allow for future expansion that is backwards compatible. + * - Fixed: Starting Vim without a file, then ":e file", ":sp" and ":q" + * unloaded the buffer. + * - Fixed: execution of autocommands could not be interrupted. + * - Fixed: "ga" on an empty line gave a misleading message, now it prints + * "empty line". + * - Fixed: With 'number' set mouse positioning was wrong when lines wrap, and + * in the GUI horizontal scrolling didn't work properly. + * - Removed "src/tags" from the source distribution; you can generate it + * yourself now that ctags is included. + * - Included "macros/life", macros to run Conway's game of life. + * - Fixed using "set go=r" in gvimrc problem for Motif GUI. + * - Fixed problems when using autocommands with ":next" et. al.. Made + * "line1", "line2" and "forceit" local variables, instead of global. Lots + * of function have to pass it as an argument, which is required to avoid + * the vars to get mixed up with recursive Ex commands. + * - Removed the use of "want_start" in search.c. Fixes bug when using a + * search string that starts with "^" and contains "\|". + * + * Changes between version 4.2 and 4.3 BETA: + * - Moved ctags, tee and xxd sources from the binary to the source archive. + * - OS/2: Adjusted ExpandWildCards again, fixed alloc/free error. + * - Fixed: "Nothing in register ^@", ^@ for buffer 0 is now " + * - Fixed: Was outputting CR CR LF instead of CR LF for termios. + * - Fixed: cindent didn't handle "} else" and "} while (cond);". + * - Fixed: Was using killpg(0, SIGINT) to interrupt external commands in the + * GUI, which isn't documented on all systems. Use kill(0, SIGINT) instead. + * - Updated version number that is compared with for the ":version" command. + * - Fixed: ":0put" inserted text below line 1; now it inserts above line 1. + * - Fixed: "/t/e" would not find the last character in a line. + * - Fixed: Unloading the current buffer could load another unloaded buffer. + * Use a loaded buffer if there is one. + * - Improved: ":dis" now shows "^J" at the end of linewise registers. + * - Fixed: Using ":q" to close a window didn't execute the BufEnter + * autocommands for the new current window. + * - Forbid the reading of a file after *ReadPre autocommands, this could give + * unpredictable results. + * - Fixed: ":sball" didn't work correctly with autocommands that contain a + * ":normal" command. + * - Fixed: was accepting a mapping after CTRL-W count. + * - Fixed: a '[' in a regexp was special, made "/[z[]/" fail. + * - Amiga, DICE: included a few patches to amiga.c. + * - Fixed: Could crash when completing a setting, e.g. ":set <t_K<Tab>" + * - Fixed: Using "new fname" in a vimrc caused a window with a non-existing + * buffer. + * - Added support for keypad keys <kHome>, <kEnd>, <kPageUp> and <kPageDown>. + * They only work when they send a different code from <Home>, etc.. + * - Swapped the arguments to LINKIT in Makefile, was making a link from Vim, + * instead of to Vim. + * - Fixed: Not all parts of the swap file were cleared before using them, + * could include any data in the swap file (mostly the password file!). + * - Fixed: Could get an extra swap file when using ":au BufLeave xx bd xx". + * - Fixed: ":set comment=n:" didn't give an error message; formatting would + * cause a hang. + * - Use off_t for lseek; FreeBSD and others use long long instead of long. + * - Fixed: ":/pat" didn't match at first column in the next line. + * - Fixed: CTRL-F at end of file with 'scrolloff' non-zero would make the + * screen jump up and down and didn't beep when no more scrolling was + * possible. When last two lines didn't fit on the screen together, the + * last one was never shown. + * - When Vim is not compiled with AUTOCMD, "<afile>" is not included. + * - Fixed: ":au BufWritePre xx bunload" caused empty file to be written, now + * it gives an error message. + * - Added "<Bar>", to be used in mappings where a '|' is needed. + * - Moved "Changing readonly file" message, In insert mode, to after the mode + * message, it would otherwise be hidden. + * - Fixed: Putting a temp file in current directory for MS-DOS causes + * problems on readonly devices. Try several directories to put the temp + * file in. + * - Changed default for Unix 'errorformat' to include a few more compilers. + * - Fixed: When exiting because of a non-existing file after the "-e" + * argument, there was no newline. + * - When writing part of a buffer to a file, don't add a end-of-line for the + * last line, if 'binary' is set and the previous read didn't have an + * end-of-line for the same line. For FileWritePre autocommands that filter + * the lines through gzip. + * - Fixed: When not writing the eol for the last line, this was not visible, + * and the line count was one too low. + * - Fixed: BufNewFile autocommands that do ":r file" sometimes didn't work, + * because the cursor was in an invalid line. + * - Fixed: a *ReadFile autocommand that changed the file to be read didn't + * work, because the file was already opened. + * - Fixed: When doing ":bdel", buf_copy_options() could copy options from + * already freed memory. Would cause any combination of strange settings. + * - Check for errors while reading the viminfo file. When there are more + * than 10 errors, quit reading it. When there is any error, don't + * overwrite it with a new viminfo file. Prevents trashing a file when + * accidently doing "vim -i file" instead of "vim -v file". + * - Added "ZQ", alias for ":q!". Elvis compatible. + * - Fixed: "vim -g" would crash when .gvimrc contains ":set go=r". + * - Fixed: ":set go&" didn't work, the default contained an illegal 'A'. + * - Added 'titlelen' option: percentage of 'columns' to use for the title. + * Reduces problems with truncating long path names. + * - Added "tee" for OS/2. Very useful for ":make". + * - Fixed: Setting 'title' in the gvimrc messed up the title of the xterm + * where Vim was started when doing ":gui". + * - Fixed: When expanding "~/file" with CTRL-X CTRL-F in insert mode, the + * "~/" would get expanded into a full path. For "~user/file" the problem + * still exists though. + * - Fixed: ":set path=../b" didn't work as expected, any path starting with a + * dot would get expanded to the directory of the current file. + * - Fixed: Any dir name in 'directory' and 'backupdir' starting with '.' was + * considered to be in the current directory, also "..". Now using "./dir" + * means using a directory relative to where the file is. + * - Fixed: ":all", ":ball" and "-o" command line option would execute + * Buf/Win Enter/Leave autocommands for first buffer a few times. Now + * they are only done when really entering a buffer/window. + * - Fixed: ":all", change in first buffer, ":all" would give an error message + * for not writing the file. + * - Added 'shellcmdflag' and 'shellquote' options, mainly for Win32 when + * using different kinds of shell. + * - Fixed: "unmenu *" in .gvimrc caused a crash on some machines. + * - Fixed: ":buf" (go to current buffer) should not do anything. It executed + * autocommands and set the previous context mark. + * - Fixed: "*``" moved the cursor back to the start of the word, instead of + * where the cursor was within or before the word. + * - Fixed: ":e %:p:h" removed the head of the path ("/" for unix, "d:\" for + * DOS, "drive:" for Amiga. + * - Fixed: for the Win32 version, 'term' must be "win32", don't init it with + * $TERM. + * - Fixed: Filename completion with <Tab>, when there are several matches, + * but only one without ignored suffix, next <Tab> obtained second match, + * not the one after the previous one. Now the files without matching + * suffix are put in front of the list. + * - Fixed: DJGPP version of system() was eating file descriptors, after a few + * filter commands there would be an "Out of file handles" error. + * - Fixed: for MS-DOS: ":n doc\*.txt" didn't work, it became "doc*.txt". + * - Added: MS-DOS and WIN32 now expand $ENV in a filename. ":e $VIM/_vimrc" + * works now. + * - Fixed: MS-DOS: after ":mode 1" mouse didn't move correctly. Now it + * mostly works for the display modes up to 0x13. + * - Fixed: In Insert mode, the message from "^O:set tw" would be overwritten + * by "--INSERT--". Now there is a 10 second delay to be able to read the + * message. + * * Changes between version 4.1 and 4.2: * - Included ctags version 1.3. * - Included xxd.c version 1.4 (only one change since 1.3m) @@ -134,11 +298,13 @@ * Don't forget to update the numbers in version.h for Win32!!! */ -char *Version = "VIM 4.2"; +#include "version.h" + +char *Version = "VIM 4.4"; #ifdef HAVE_DATE_TIME -char *longVersion = "VIM - Vi IMproved 4.2 (1996 June 17, compiled " __DATE__ " " __TIME__ ")"; +char *longVersion = "VIM - Vi IMproved 4.4 BETA (1996 Sep 11, compiled " __DATE__ " " __TIME__ ")"; #else -char *longVersion = "VIM - Vi IMproved 4.2 (1996 June 17)"; +char *longVersion = "VIM - Vi IMproved 4.4 BETA (1996 Sep 11)"; #endif static void version_msg __ARGS((char *s)); @@ -161,7 +327,7 @@ do_version(arg) else found_version += n; } - if (found_version > 400) + if (found_version > VIM_VERSION_MAJOR * 100 + VIM_VERSION_MINOR) { MSG("Warning: Found newer version command"); if (sourcing_name != NULL) |