| Age | Commit message (Collapse) | Author |
|---|
|
- rework auich_halt_pipe() and use it to ensure AUICH_RR is
set only after DMA is halted (spec says to do so)
- rework auich_calibrate(): clear interrupt and event bits in
AUICH_STS and ensure CIV counter is not changed.
- in the interrupt handler, set LVI to (qptr - 1) rather than
the max value (bug introduced by previous commit)
All fixes are from Christopher Zimmermann <madroach at zakweb.de>,
Thanks!
tested on two different intel-based auich devices,
ok jakemsr
|
|
|
|
breaks at least socppc and armish
|
|
28 bit address bus) by reusing the regular sun4 configuration stanzas (with
the upper four bits set in the device addresses), and clearing them when
searching for a PROM mapping.
This makes the obio autoconf code simpler, and all knowledge of the 4/110
specifics is now contained in a single file (dev/obio.c).
ok todd@ deraadt@
|
|
for not noticing earlier)
|
|
also gets a bit of a KNF scrubbing at claudio@'s insistence. Shaves some
bytes from the kernel as well.
tested by phessler@ and zinovnik@, thanks
ok claudio@
|
|
bogus) `cache enabled' line in dmesg on 4/110.
ok todd@ deraadt@
|
|
|
|
|
|
|
|
|
|
instead of copying the 802.11 header on the stack and building
the ethernet header directly in the mbuf, build the ethernet
header on the stack directly from the 802.11 header in the
mbuf and copy the ethernet header to the mbuf after stripping
the 802.11 header.
makes the code easier to read/understand, especially, it is
now explicit what is being put in the ether_type field.
diff from Matthew Dempsky (matthew at dempsky dot org)
moved ieee80211_align_mbuf() under #ifdef __STRICT_ALIGNMENT
while i'm here.
|
|
share the driver with different GPIOs/IRQs Diff from marex via jasper.
|
|
|
|
ok deraadt@ sthen@
|
|
|
|
ok claudio@
|
|
|
|
|
|
|
|
|
|
netboot methods using rarp, thus only learning their IP address without
mask. And of course the next step is a broadcast - which goes to the
broadcast address calculated classful. *sigh*. PR6382
instead of storing a second broadcast address per ifaddr as we used to
figure out wether we're dealing with a classful broadcast on the fly. the
math is extremely cheap and all my previous profilings showed that cpu
cycles are basically free, we're constrained by memory access.
excellent analysis by Pascal Lalonde <plalonde at overnet.qc.ca> who also
submitted the PR. claudio ok
|
|
Add the necessary ntohl() and shifts in various places and cleanup the byte
order mess we had before. michele@ agrees.
|
|
connect() calls. Our network stack does not allow any v4 mapped addresses
so there is no need to allow them in connect(). Found after discussion with
Henning. OK deraadt@
|
|
|
|
ok jsg@
|
|
|
|
|
|
they point to the correct location.
|
|
|
|
|
|
With this +REQUIRING should be "complete" (not that this does not check
that the packages are reachable through closure, just that +REQUIRING is
sane).
|
|
|
|
but it helps people to get used to it and to start testing.
requested by deraadt@
|
|
ok reyk
|
|
|
|
ok kettenis@
|
|
|
|
- arrange for data blocks to start on 32B cache line boundary.
from uwe@netbsd
ok miod@ (with an indentation suggestion)
|
|
|
|
The main step forward is that this now has *much* better .Bl -column
support, now supporting many manuals that previously errored out
without producing any output.
Other fixes include:
* do not die from multiple list types, use the first and warn
* in .Bl without a type, default to -item
* various tweaks to .Dt
* fix .In, .Fd, .Ft, .Fn and .Fo formatting
* some documentation fixes and additions
* and fix a couple of bugs reported by Ulrich Spoerlein:
* better support for roff block-end "\}" without a preceding dot
* .In must not break the line outside SYNOPSIS
* spelling in some error messages
While merging, fix one regression in .In spacing
that needs to go to bsd.lv, too.
|
|
combination. Display C-@, etc, as C-Space, in list-keys. By Micah Cowan.
|
|
which is mostly the post-hackathon release,
bringing in the OpenBSD changes to bsd.lv,
but which also has a few additional minor fixes:
* .Lb is an in-line macro, not in_line_eoln
* .Bt, .Ud now warn when discarding arguments
* allow bad -man dates to flow verbatim into the front-ends
- so far all reported by Ulrich Spoerlein
* .Ar, .Fl and .Li starting with closing punctuation emit an empty element
* empty .Li macros print nothing, but may cause spacing
* proper EOS handling for .Bt, .Ex, .Rv, and .Ud.
* cleanup: collapse posts_xr into posts_wtext (which is the same)
* efficiency: very simple table lookup for roff.c
|
|
|
|
|
|
found the hard way by matthieu@ and krw@
in /usr/xenocara/lib/libXaw/spec/strings.mit.
This needs to be done more carefully. Sorry!
|
|
from uwe@netbsd
ok miod@
|
|
millert@ ok.
|
|
|
|
from time to time when building the www/larbin port.
This is an independent bugfix, and it's different from 4.5.0.
ok espie@
|
