Age | Commit message (Expand) | Author |
2007-04-25 | Add capacity to specify one ntp 'server' (not 'servers') during install. | Kenneth R Westerback |
2007-04-25 | we only have to mask interrupts once when we bring the interface down | David Gwynne |
2007-04-25 | i got a reg init wrong, still no tx completion though. | David Gwynne |
2007-04-25 | enable tx completion interrupts and provide handling for them. | David Gwynne |
2007-04-25 | fix a dprintf in the debug path | David Gwynne |
2007-04-25 | more register init in tht_up | David Gwynne |
2007-04-25 | Yet another case that forgot to set the time. | Artur Grabowski |
2007-04-25 | Set the time even when the clock chip is bad. | Artur Grabowski |
2007-04-25 | put a two second timeout on the chip init after the firmware is loaded | David Gwynne |
2007-04-25 | the non existent -W option is removed from the usage() | Igor Sobrado |
2007-04-25 | shift some bits like the spec says i should. | David Gwynne |
2007-04-25 | format string fix | David Gwynne |
2007-04-25 | add some debug to the tx paths so i can see packets go on and off the hw. | David Gwynne |
2007-04-25 | fix the conditions that the tx free path keeps looping on so that it will | David Gwynne |
2007-04-25 | configure the 10G mac and enable (more) interrupts when the interface is | David Gwynne |
2007-04-25 | split tht_fifo_ready into tht_fifo_writable and tht_fifo_readable. the way | David Gwynne |
2007-04-25 | Copy signal-safe edit function from sendbug. | Ray Lai |
2007-04-25 | start implementing interrupt handling. | David Gwynne |
2007-04-25 | Remove extra code that only applies to setuid/setgid programs. | Ray Lai |
2007-04-25 | add more register definitions, in particular the interrupt ones. | David Gwynne |
2007-04-25 | im an idiot. for (;;) { } while (condition); loops forever, no matter what | David Gwynne |
2007-04-25 | add some debug goo to be used soon | David Gwynne |
2007-04-25 | Same change as i386, use the number of states to calculate performance | Gordon Willem Klok |
2007-04-24 | Pass a real dev_t to readdisklabel(), not a unit number with lipstick. | Kenneth R Westerback |
2007-04-24 | missing "macppc" from the .Dt line; | Jason McIntyre |
2007-04-24 | Tell init(8) to power down machine instead of just halting it. | Mark Kettenis |
2007-04-24 | Dont log() send failures in nfs_send(), they arent helpful since we retry | Thordur I. Bjornsson |
2007-04-24 | do not printf+panic, when a longer panic message is easier; kettenis ok | Theo de Raadt |
2007-04-24 | Make power(4) map registers in io space if mem space fails. | Mark Kettenis |
2007-04-24 | sync | Theo de Raadt |
2007-04-24 | Choose the state for a request performance level based on calculations | Gordon Willem Klok |
2007-04-24 | It's never too late to write "too late" correctly. | Miod Vallat |
2007-04-24 | exeption -> exception | Miod Vallat |
2007-04-24 | BUGS have been resolved. | Gordon Willem Klok |
2007-04-24 | Firmware lies! Switching from LEVEL to EDGE triggered interrupt prevents | Gordon Willem Klok |
2007-04-24 | replace D, D1 and D2 by date, date1 and date2 respectively; | Igor Sobrado |
2007-04-24 | Try to document the new 4-byte AS numbers without being to invasive. | Claudio Jeker |
2007-04-24 | changes "Usage" to "usage"; sorts options list in cvs history; | Igor Sobrado |
2007-04-24 | apic_address should be 32 bits, rather than paddr_t; prepares us for | Tom Cosgrove |
2007-04-24 | Use the physical address we have stored for the page directory rather | Tom Cosgrove |
2007-04-24 | Fix mounting of ffs2 via "mount -a". ffs2 is not separate from ffs | Todd C. Miller |
2007-04-24 | do not use static function declarations in kernel drivers (no | Reyk Floeter |
2007-04-24 | Add draft-ietf-idr-as4bytes-13 to the see also list. | Claudio Jeker |
2007-04-24 | use the fifos ready byte counter in the firmware loading. | David Gwynne |
2007-04-24 | support non-integral refresh intervals, possibly as low as 0.1s. | Ted Unangst |
2007-04-23 | Add initial test for existing metadata on chunks. | Marco Peereboom |
2007-04-23 | the Broadcom BCM5751M Gigabit Ethernet device found on the | Igor Sobrado |
2007-04-23 | Add interesting runtime stats. | Marco Peereboom |
2007-04-23 | When receiving an undock request, walk the list of dependant devices | Michael Knudsen |
2007-04-23 | Remove duplicate commment | Todd C. Miller |