summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2006-01-30Add basic radiotap support. Modelled somewhat afterJonathan Gray
ral and NetBSD wi radiotap. "looks ok" damien@
2006-01-30only flush the TX descriptors in re_start() if there are packetsBrad Smith
to be transmitted. tested by jsg@
2006-01-30reduce the timeout waiting for command completions from 5 seconds to .1David Gwynne
seconds. i think if the bus is wired up wrong the command never completes, which in turn generates a 3 minute delay during boot while we try to scan for i2c devices. problem reported by Johan Mson Lindman who is also happy with the fix.
2006-01-29remove printf on ath_cardbus_power; reyk@ ok.Federico G. Schwindt
2006-01-29regenBrad Smith
2006-01-29add VT6410 IDE PCI id.Brad Smith
2006-01-29- fix a bug where co -l would fail with "permission denied" if the workingNiall O'Higgins
file was read-only. ok joris@
2006-01-29ethernet -> EthernetJason McIntyre
2006-01-29Disable iic whenever ipmi is enabled. This fixes boxes like Sun x4200 thatMarco Peereboom
freak out when more than one device driver touch the i2c devices. Reported by: Srebrenko Sehic <ssehic at gmail dot com> ok kettenis@
2006-01-29SMC91CXX NuBus hooksMartin Reindl
from NetBSD
2006-01-29re-enable scatter and fix scanning of 802.11a channels.Damien Bergamini
2006-01-29Don't probe address 0x4f.Mark Kettenis
ok deraadt@
2006-01-29spread some fatal() here too;Xavier Santolaria
2006-01-29RCS_PARSE_FULLY needed here too, as in rlog(1);Xavier Santolaria
2006-01-29Add a alpha_shared_intr_reset_strays() function that resets the strayMartin Reindl
interrupt counter for a given shared interrupt descriptor. When an interrupt is successfully handled, reset the strays counter, thus preventing a "slow leak" from eventually shutting off the interrupt vector. from NetBSD via KUDO Takashi
2006-01-29Use usbd_clear_endpoint_stall_async() when clearing endpoint stalls inBrad Smith
an interrupt context. From NetBSD ok dlg@
2006-01-29prettify dmesg output a touch. from Michael Knudsen.David Gwynne
ok brad@
2006-01-29Don't ask bus_dmamem_alloc() for zero bytes. 'bioctl -H x:y amiz' noKenneth R Westerback
longer triggers a panic. ok marco@ dlg@.
2006-01-29index the drive labels from 0 instead of 1 to match the labels on the frontDavid Gwynne
of the machine. also helps line things up between sensors and bioctl. ok marco@
2006-01-28Fix hmac calculation.Marco Pfatschbacher
Add some f's; do comparison in host byte order. OK mcbride@
2006-01-28Remove duplicate cgetstr() call introduced by accident. Andrey MatveevTodd C. Miller
2006-01-28a little cleaning.Brad Smith
2006-01-28zap unused functionHenning Brauer
From: Andrey Matveev <evol@online.ptt.ru>
2006-01-28mention net.inet.ip.mforwarding.Brad Smith
ok beck@ kettenis@ norby@
2006-01-28be less verbose:Nikolay Sturm
- status does not provide any information, remove it - print battery status in one line ok beck, drahn, i386 tested by bernd
2006-01-28Move address checks forward. Cleanup comments.Mark Kettenis
2006-01-28add glenv(4); ok kettenisJason McIntyre
2006-01-28- don't segfault on rcsnum overflow.Niall O'Higgins
ok joris@
2006-01-28Consider temperatures below -45 degC to be invalid for Winbond chips.Mark Kettenis
2006-01-28Disable ds1624/ds1631/ds1721 probe.Mark Kettenis
requested by deraadt@
2006-01-28Rename lm_isa.c to lm78_isa.c. Now that there isn't really any NetBSD codeMark Kettenis
left, replace copyright with my own. requested by deraadt@
2006-01-28Rename lm_i2c.c to lm78_i2c.c.Mark Kettenis
requested by deraadt@
2006-01-28Add glenv(4) man page.Mark Kettenis
2006-01-28Correct date.Mark Kettenis
2006-01-28remove 2 printf's from dc_coal() too.Brad Smith
2006-01-28get rid of the sensors globals. theyre were only used by sysctl forDavid Gwynne
locating and finding the correct sensor to spit out. instead provide a a sensor_get function that wraps up the access to the vars. theyre now safe inside kern_sensors.c. theres also a touch of whitespace tweaking ok grange@
2006-01-28add -- after options, so files with leading - work.Ted Unangst
pr 4993 from jason.
2006-01-28simplify statics, remove stupid goto, plug a leak. ok moritzTed Unangst
2006-01-28Make sure that HW VLAN stripping is not enabled and remove unused codeBrad Smith
for HW VLAN stripping.
2006-01-28remove printf's from dc_newbuf().Brad Smith
2006-01-27Oops, removed too many includes in 1.34 by mistake; spotted matthieu@Miod Vallat
2006-01-27CVS_EX_BADROOT return code is not worth keeping;Xavier Santolaria
2006-01-27more errors handling cleanup;Xavier Santolaria
2006-01-27Use letoh32 to print out configuration descriptors in debug functions. NowClaudio Jeker
big endian systems will print out correct settings.
2006-01-27cvs_mkadmin() cannot return < 0 anymore;Xavier Santolaria
2006-01-27errors handling cleaning here too;Xavier Santolaria
2006-01-27errors handling cleaning here too;Xavier Santolaria
2006-01-27errors handling cleaning;Xavier Santolaria
2006-01-27use fatal();Xavier Santolaria
2006-01-27regress test for local to local scp copies; ok dtucker@Damien Miller