summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2010-03-03Enable urndis(4) everywhere that has USB enabled to get it tested.Michael Knudsen
Much prodding from deraadt.
2010-03-03Bring back cua code for sparc zs; lost in zs.c 1.36 on sparc and later forgottenMiod Vallat
about, and never implemented in sparc64 but changes are the same. ok deraadt@
2010-03-03supply apm(4) with infomation and events; ok miod@Otto Moerbeek
2010-03-03Add some more devices that ckuethe has tested with.Michael Knudsen
2010-03-03Correctly initialize the command frame in uyurex_write_value_request();Miod Vallat
ok yuo@
2010-03-03When I first started on urndis, I didn't realise that all values wereMichael Knudsen
u_int32_ts, so I made some typedefs for certain types. It's just pointless, so get rid of them. Jonathan and Fabien agree.
2010-03-03Remove XXX that's no longer valid.Michael Knudsen
From Jonathan Armani.
2010-03-03When allocating virtual space for bus_space_map, don't useOwain Ainsworth
uvm_km_alloc() (which allocates some virtual space and then $size_of_mapping pages which it then enters) *then* pmap_kenter the bus_space address that we wish to map, it's just a little bit stupid and a waste of memory. replace with uvm_km_valloc and ponies for everyone. ok drahn@
2010-03-03Add description of -p and remove reference to fstab processing.Otto Moerbeek
Prompted by J.C. Robers; ok jmc@
2010-03-03it's true!Jasper Lievisse Adriaanse
2010-03-03Replace enum rib_state with enum reconf_action since their doing the same.Claudio Jeker
NEW is now REINIT, ACTIVE is KEEP and DELETE and NONE stay the same.
2010-03-03- add and enable bluetoothJasper Lievisse Adriaanse
ok miod@ otto@
2010-03-03Store ARCBios variables before machine specific setup is performed andJoel Sing
make console selection on a per machine basis. Whilst here store the keyboard layout ('keybd') and graphics state ('gfx') variables for future use. ok miod@
2010-03-03G41 works here too, so enable it for inteldrm.Owain Ainsworth
Thanks again to eric@ for testing this and bringing it to my attention.
2010-03-03tweak mda.c rev. 1.36: eliminate risk of busy waiting for socketJacek Masiulaniec
to become writable, and make code more idiomatic. tested by nicm@ ok gilles@
2010-03-03tweak mda.c rev. 1.36: eliminate risk of busy waiting for socketJacek Masiulaniec
to become writable, and make code more idiomatic. tested by nicm@ ok gilles@
2010-03-03Attach intagp on the G41 also.Owain Ainsworth
tested by eric@.
2010-03-03Must check for NO_LABEL here as well or we print strange label numbers.Claudio Jeker
OK michele@
2010-03-03Rework the kroute code by stealing some code from ospfd and massaging itClaudio Jeker
a lot more. Main reason for this is to add priority support. Additionally add some additional NO_LABEL fixes. OK michele@
2010-03-03Remove superfluous newlineClaudio Jeker
2010-03-03reject strings with embedded ASCII nul chars in certificate key IDs,Damien Miller
principal names and constraints
2010-03-03add an extra test to ensure that authentication with the wrongDamien Miller
certificate fails as it should (and it does)
2010-03-02Add RCS IdentDamien Miller
2010-03-02POSIX strptime is stricter than OpenBSD's so do a little dance toDamien Miller
appease it.
2010-03-02Add newly supported card; from Brad.Stuart Henderson
2010-03-02Fix support for Intel PRO/1000 QP 82575-based devices. This changes the wayDariusz Swiderski
PHY is recognized on 82575 based cards, now they are autodetected. Patch originaly form Atte Peltomaki, minor changes by me. ok by sthen@, claudio@
2010-03-02Add support for the Lemote Lynloong all-in-one PC (basically a Fuloong withoutMiod Vallat
the serial and IR ports, built into a mac-like case). At least PMON initializes the frame buffer in a much friendlier video mode (1360x768x16), but there is still no frame buffer acceleration yet. Tested by wvdputte.
2010-03-02Rename sc_sc to sc_softc.Michael Knudsen
2010-03-02Actually prefer PCIHI mappings to PCILO mappings, as the early console codeMiod Vallat
attempts to map resources without bothering to know their size. I should probably be more careful and do the BAR dance to get the BAR size, but then at this point we are reusing mappings set up by PMON, and it's ok to trust it. This would only have ever become an issue with a framebuffer larger than 64MB mapped at PCIHI with a PCILO mapping overlapping the first few 64MB anyway.
2010-03-02Remove some XXXs.Michael Knudsen
2010-03-02Zap unused struct.Michael Knudsen
2010-03-02variable name is SUBDIR, not SUBDIRS; from Amarendra GodboleJason McIntyre
2010-03-02Get rid of the code that deals with the interrupt pipe. The currentMichael Knudsen
code doesn't do anything at the moment, so no point in keeping it.
2010-03-02remove never changing values (design capacity, design voltage) from sensorOtto Moerbeek
info; ok miod@
2010-03-02Fix typos and keep whitespace around PROM command examples consistent.Joel Sing
ok miod@
2010-03-02Add missing "wsdisplay* at gbe?". Also, list the hardware initialisationJoel Sing
requirements as a caveat rather than a bug.
2010-03-02- Add PCI id for the Smart Array P700m adapter.Stuart Henderson
- Rename one of the existing Smart Array entries (0x3237) to reflect its name as being a Smart Array E500 adapter. From FreeBSD - Add a Smart Array E200i PCI id missing from ciss_pci.c, although it has been in pcidevs for some time.
2010-03-02syncStuart Henderson
2010-03-02- Add PCI id for the Smart Array P700m adapter.Stuart Henderson
- Rename one of the existing Smart Array entries (0x3237) to reflect its name as being a Smart Array E500 adapter. From FreeBSD via Brad, ok jsg@
2010-03-02Use the battery controller bit that signals the battery almost emptyOtto Moerbeek
condition to determine crtical status for the sensor and apm. This makes the critical status correspond to the flashing red battery led. Furthermore, use ISSET macros and friends.
2010-03-02sync with mirrors.dat updateStuart Henderson
2010-03-02keep Nd lines in sync;Jason McIntyre
2010-03-02syncTheo de Raadt
2010-03-02The -stable default ftp directory should not be snapshots/$ARCH.Kenneth R Westerback
The normal release directory is a less surprising default. Suggested by henning@ a while ago. Working script incantation courtesy of several cluebats from halex@. No strong opposition. ok deraadt@
2010-03-02In man(7), do not crash on very long title lines,Ingo Schwarze
and do not emulate groff's habit of printing garbage either, but just print the wanted information even though the format must be sacrificed because it won't fit.
2010-03-02For -man -Tascii, limit the width of normal text to 65 characters,Ingo Schwarze
and effectively unlimit the width of literal displays. Following this traditional behaviour allows for automatic output comparisons.
2010-03-02Accept the non-standard macros .Sp (similar to .sp)Ingo Schwarze
and .Vb/.Ve (similar to .nf/.fi) in man(7) mode. These are not intended to be used manually, but they allow us to properly render man(7) code autogenerated by pod2man(1), making Perl and OpenSSL happy in our tree.
2010-03-02Proper inter-sentence spacing for mdoc(7).Ingo Schwarze
When a text line or a non-block macro line in the source code ends in any of ".!?", consider that an end of sentence (EOS). This makes Jason's rule "new sentence, new line" even more important. Let the parser detect the EOS and insert a token into the AST. Let the -Tascii frontend render the EOS token as a double space before the next word.
2010-03-02Permit keys in copy mode to be prefixed by a repeat count, entered withNicholas Marriott
[1-9] in vi mode, or M-[1-9] in emacs mode. From Micah Cowan, tweaked a little by me.
2010-03-02Distinguish opening and closing delimiters, and close out blockIngo Schwarze
macros after closing delimiters only, not after opening ones. Besides, neither roff nor old nor new groff consider braces { } as delimiters. This fixes some frequent misrenderings by mandoc, for example ".Ql (" being rendered as "`'(" instead of "`('".
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-16 22:08:09 +0000