| Age | Commit message (Collapse) | Author | |
|---|---|---|---|
| 2005-12-29 | we were wrongly decrementing cvs_mtskt_depth when handling | Joris Vink | |
| a '-' MT response. this caused checkout and update to fail remotely. caught by xfree(). | |||
| 2005-12-29 | Put the existing _np functions into separate file; introduce | Otto Moerbeek | |
| pthread_stackseg_np(), from existing pthread lib. discussed with tedu@ ok marc@ | |||
| 2005-12-29 | Correctly bounds check transfers passed to vndstrategy() | Pedro Martelletto | |
| 2005-12-29 | Fix wrong optimization in spec_write() that goes: if we are about to do | Pedro Martelletto | |
| a write that will globber the whole buffer, and it's not in cache, do not bother reading it in. That's wrong, since the user may be trying to write beyond the disk extent, in which case we definitely want to return an error, rather than returning saying the write was okay, and failing later on at an 'uncatched' biodone(). Okay tedu@. | |||
| 2005-12-29 | mention the keywords "wireless network interface" for the -M switch; | Reyk Floeter | |
| consistency with other 802.11-specific commands descriptions. thanks to Andreas Bihlmaier | |||
| 2005-12-29 | implement pthread_main_np(); ok tedu@ | Otto Moerbeek | |
| 2005-12-29 | zap unused ohash_lookup_string declaration; ok espie | Jared Yanovich | |
| 2005-12-29 | remove duplicate sentence; | Jason McIntyre | |
| from mike belopuhov; | |||
| 2005-12-29 | Match a few more lm(4) Winbond and ASUS chips. | Mark Kettenis | |
| 2005-12-29 | stop using I2C_F_POLL; it is a bus driver responsibility now | Theo de Raadt | |
| 2005-12-29 | add admcts(4) | Theo de Raadt | |
| 2005-12-29 | Add a bunch of i2c sensors. | Mark Kettenis | |
| ok deraadt@ | |||
| 2005-12-29 | Add viapm(4). | Mark Kettenis | |
| ok deraadt@ | |||
| 2005-12-29 | right spot | Theo de Raadt | |
| 2005-12-29 | add admcts(4) | Theo de Raadt | |
| 2005-12-29 | allows a shared library version to be set using LIBname_VERSION=major.minor | Marc Espie | |
| This overrides the major/minor contents of an shlib_version. Useful for overriding version numbers in ports. after discussion with bernd@, millert@, deraadt@ | |||
| 2005-12-29 | Add viapm(4). | Mark Kettenis | |
| 2005-12-29 | Driver for SMBus coontroller integrated on VIA VT8237 bus control and power | Mark Kettenis | |
| management controller. ok deraadt@ | |||
| 2005-12-29 | More correct cleanup on exit. OK norby@ | Claudio Jeker | |
| 2005-12-29 | Instead of a simple timer per neighbor for the LS retransmition list use | Claudio Jeker | |
| a timewheel. All LSA updates are now first added to the queue and sent out later. This makes it possible to cluster multiple LSA updates into on OSPF packet. This gives a massive speedup when large databases need to be synced. Tested and OK norby@ | |||
| 2005-12-29 | go via pckbc_enqeue_cmd() in pckbd_enable() if on; fixes PR 4615 | Martin Reindl | |
| ok miod@, mickey@ | |||
| 2005-12-29 | the story in pthread_rwlockattr_destory() shoudl be destroyed | Otto Moerbeek | |
| 2005-12-29 | .Nm does not require an argument; | Jason McIntyre | |
| from ray lai | |||
| 2005-12-29 | correction from ray lai; | Jason McIntyre | |
| ok espie | |||
| 2005-12-29 | make SYNOPSIS look better; | Jason McIntyre | |
| from mike belopuhov; ok grange | |||
| 2005-12-29 | add an ENVIRONMENT section, and document EDITOR and VISUAL; | Jason McIntyre | |
| ok tedu | |||
| 2005-12-29 | whitespace and wording; | Jason McIntyre | |
| 2005-12-29 | insanity debugged with djm -- here is the comment from the code: | Theo de Raadt | |
| + * Some Maxim 1617 clones MAY NOT even read cmd 0xfc! When it is + * read, they will power-on-reset. Their default condition + * (control register bit 0x80) therefore will be that they assert + * /ALERT for the 5 potential errors that may occur. One of those + * errors is that the external temperature diode is missing. This + * is unfortunately a common choice of system designers, except + * suddenly now we get a /ALERT, which may on some chipsets cause + * us to receive an entirely unexpected SMI .. and then an NMI. + * + * As we probe each device, if we hit something which looks suspiciously + * like it may potentially be a 1617 or clone, we immediately set this + * variable to avoid reading that register offset. | |||
| 2005-12-29 | add an 'include' rule to hostapd.conf(5); based on an older diff from | Reyk Floeter | |
| dhartmei@ for the parser. this is useful if you have many hostapd systems using the same configuration but individual local definitions (like macros or table entries). | |||
| 2005-12-29 | remove bad newline for the secondary PCI bus with the 82450KX/GX chipset | Brad Smith | |
| which was introduced in rev 1.11. thanks to marco@ for pointing out the issue, testing and ok'ing the diff. | |||
| 2005-12-29 | static functions suck | Theo de Raadt | |
| 2005-12-29 | typo | Brad Smith | |
| 2005-12-29 | Fix isadma0 at isa0 at mainbus0 | Mark Kettenis | |
| ok deraadt@ | |||
| 2005-12-29 | "xeontemp" just means "looks like some sort of adm1021, or maxim1617, | Theo de Raadt | |
| but without any ID registers". anyways, i found some that still have two registers. instead of using "xeontemp" to mean "only look at one probe", use the existing 0x7f == short plus the ext-short bit in the status register to determine validity. otherwise, show them both. | |||
| 2005-12-28 | probe for adm1032, a stupid stupid adm1021 | Theo de Raadt | |
| 2005-12-28 | this should also match lm86, lm89, lm90, lm99, lm89-1, lm99-1, i think | Theo de Raadt | |
| 2005-12-28 | use 'break-in' for consistency; ok deraadt@ ok and input jmc@ | Kevin Steves | |
| 2005-12-28 | Remove dead cruft. | Miod Vallat | |
| 2005-12-28 | correct copyright | Theo de Raadt | |
| 2005-12-28 | probe true lm90, lm99, lm89, lm86 devices | Theo de Raadt | |
| 2005-12-28 | I think this is better fan support | Theo de Raadt | |
| 2005-12-28 | clear IFF_RUNNING here to get a full re-init. | Brad Smith | |
| 2005-12-28 | using the PCI capability register to check for PCI-X mode doesn't get the ↵ | Brad Smith | |
| expected result as this is set whether the board is in a PCI-X slot or not. The chip can tell us if we're on a conventional PCI bus. | |||
| 2005-12-28 | ...thus no need to override conscode if we are configured as console, so that | Miod Vallat | |
| kernels with hardcoded CONSCODE value can run as advertized regardless of the service switch position. | |||
| 2005-12-28 | hyper, rbox and topcat not in intio space are CN_NORMAL priority, not | Miod Vallat | |
| CN_INTERNAL. | |||
| 2005-12-28 | Define dca remote console identifiers as regular identifier with the bit 7 | Miod Vallat | |
| set, like dcm does. No functional change. | |||
| 2005-12-28 | Setting the service switch on 425e to select serial console shall not be | Miod Vallat | |
| considered as forcing the console, but as a normal remote console selection. | |||
| 2005-12-28 | Use the DIP macros to uniformly access fields from UFS1 and UFS2 dinodes. | Pedro Martelletto | |
| No functional change, okay tedu@. | |||
| 2005-12-28 | Fix bge_eeprom_getbyte() to return 1 when timeout happens. | Brad Smith | |
| Previously it always returned 0 which means success regardless of EEPROM status. While here, add a check whether EEPROM read is successful. From yongari FreeBSD | |||
| 2005-12-28 | if many regs in a "xeontemp" appear the same, it is not one | Theo de Raadt | |
 |
index : src | |
| OpenBSD base system |
| summaryrefslogtreecommitdiff |