Age | Commit message (Expand) | Author |
2006-08-25 | forget about >4g memory if not switched to pae in order to disable all the bo... | Michael Shalayeff |
2006-08-25 | add PackingOld when replacing, helps people with really old installs... | Marc Espie |
2006-08-25 | sync the cac, ciss and twe entries. | Brad Smith |
2006-08-25 | mention some board models and other info. | Brad Smith |
2006-08-25 | spacing | Theo de Raadt |
2006-08-25 | update for the Triware to 3ware renaming and use pci_matchbyid(). | Brad Smith |
2006-08-25 | regen | Brad Smith |
2006-08-25 | - rename TRIWARE to 3WARE | Brad Smith |
2006-08-25 | Disable interrupts during the attach of UHCI and EHCI controllers. If | Christopher Pascoe |
2006-08-25 | fill in the controllers name in the inq ioctl. spotted by deraadt@ | David Gwynne |
2006-08-25 | don't need to clear if_timer during attach. | Brad Smith |
2006-08-25 | only write to the RMAC_CFG_KEY register for the Xframe chipset. | Brad Smith |
2006-08-25 | Allow the driver to compile with MSK_DEBUG. | Brad Smith |
2006-08-24 | Add some first PCI glue. | Marcus Glocker |
2006-08-24 | Add a few printfs to slow down SGEC initialization - somehow this appears | Miod Vallat |
2006-08-24 | missing newline in a printf | Theo de Raadt |
2006-08-24 | Off-by-one in ``dmesg'' command; it takes a vax to find such bugs. | Miod Vallat |
2006-08-24 | Same change as on amd64. Don't propogate low level errors to userland. | Gordon Willem Klok |
2006-08-24 | Fix a few more cases where we propogate low level errors to userland. | Gordon Willem Klok |
2006-08-24 | Check for a selftest failure after reset in the correct register. | Miod Vallat |
2006-08-24 | Enable the appropriate serial transmitters in VXT2000 serial routines, this | Miod Vallat |
2006-08-24 | Regen | Miod Vallat |
2006-08-24 | /dev/kUmem is long dead. | Miod Vallat |
2006-08-24 | better Nd entries. | Brad Smith |
2006-08-24 | spacing | Theo de Raadt |
2006-08-24 | s/IEEE80211_MTU_MAX/IEEE80211_MAX_LEN/ in my previous commit. | Damien Bergamini |
2006-08-24 | dont print debug output when the scsi completion path returns with | David Gwynne |
2006-08-24 | show the firmware revision of the disks. | David Gwynne |
2006-08-24 | report the size of the disks and volumes correctly. | David Gwynne |
2006-08-24 | Be sure to print device name in debug messages, remove | Jonathan Gray |
2006-08-24 | Similar to the sample pf.conf, comment out everything. Suggested | Hans-Joerg Hoexer |
2006-08-24 | Add support for HMACs to the via c3/c7 crypto driver. For now, we | Hans-Joerg Hoexer |
2006-08-24 | We've switched from aesctr to aes as default cipher quite some time | Hans-Joerg Hoexer |
2006-08-24 | when shutting down, wrap the variable manipulation in splusb() so weird | Jason Wright |
2006-08-24 | recognize xauth vendor payload | Hans-Joerg Hoexer |
2006-08-24 | new post-soviet order in poland (from Mikolaj Kucharski <eth0@o2.pl>) and als... | Michael Shalayeff |
2006-08-24 | too much copy and paste. report raid 1 correctly. | David Gwynne |
2006-08-24 | ignore passthru volumes, struct bioc_vol isnt smart enough to know what | David Gwynne |
2006-08-24 | figure out the raid level of the volume. | David Gwynne |
2006-08-24 | oops, im unlocking too often | David Gwynne |
2006-08-24 | a start at the BIOC INQ, VOL, and DISK ioctls for fetching information | David Gwynne |
2006-08-24 | add .Ex; | Jason McIntyre |
2006-08-24 | - expand the text on priorities: from netbsd | Jason McIntyre |
2006-08-24 | reword a scary sentence; | Jason McIntyre |
2006-08-24 | sort options; | Jason McIntyre |
2006-08-24 | regen | Gordon Willem Klok |
2006-08-24 | Add vendor "miro computer products AG" and device MiroVIEDO DC20 plus | Gordon Willem Klok |
2006-08-24 | 0x00000c05 type specifies an Ethernet frame. Print the src MAC | Kevin Steves |
2006-08-24 | regen | Brad Smith |
2006-08-24 | add the Epson Perfection 1670 and Stylus CX3650. | Brad Smith |