summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2006-06-10clarify the requirements for table ioctls so the word "table" is notBob Beck
used to refer to everything not even a pf table, and some of the size fields are actually documented. help from jmc@ ok jmc@ dhartmei@
2006-06-10update .Nd, SYNOPSIS, and DESCRIPTION, after alexey e. suslikov pointedJason McIntyre
out that it was a bit dated; ok mjc
2006-06-10if we're not reading a page then we're writing a page. stupid braino fromDavid Gwynne
me pointed out by marco.
2006-06-10Redo debug prints to make it less loud and more granular.Marco Peereboom
ok dlg
2006-06-10Make uvn_sync_lock a rwlock, okay thib@ tedu@Pedro Martelletto
2006-06-10the rest of the spi-device configuration pagesDavid Gwynne
2006-06-10the rest of the spi-port configuration pages.David Gwynne
2006-06-10knf & careful data freeing, regression tested by toddTheo de Raadt
2006-06-10add a translation for sendmsg()Nikolay Sturm
from provos, with feedback from ray and pat
2006-06-10now that Nick put up Booter 2.0, we don't need this workaround anymoreMartin Reindl
for saving the Booter settings
2006-06-10Add IIC attachment/probe. no IIC devices yet.Dale Rahn
2006-06-10bring PHYS address in sync with RAMDISK, matches the addresss redbootDale Rahn
wants. Note that redboot still wants to have a virtual load address between 0 and ramsize, so loading an unmodified kernel still doesn't work.
2006-06-10include i2c bits instead of dummying out i2c_bitbang.Dale Rahn
2006-06-10I2C support for 80321/80219Dale Rahn
2006-06-09- fix rcs_expand_keywords().Niall O'Higgins
reported by Andreas Kahari <andreas.kahari at gmail>, input from joris@
2006-06-09Allow for AH the use of the authentication algorithms added a while ago.Christian Weisgerber
Fix the indentation while we're here. ok hshoexer@
2006-06-09update the bit about checksum offload.Brad Smith
2006-06-09no hardvare available here but there is hardware ;)Brad Smith
2006-06-09fix up the comment.Brad Smith
2006-06-09document link[0-2] bits;Jason McIntyre
issue reported by hauke fath; help from deraadt
2006-06-09EFI partition types; didickman@yahoo.comTheo de Raadt
2006-06-09Xo/Xc not needed here; from davidJason McIntyre
2006-06-09handle `cvs tag -F'; input && OK joris@.Xavier Santolaria
2006-06-09sync the atheros list with what we have in ath(4);Jason McIntyre
2006-06-09improve the description of failover; ok reykJason McIntyre
2006-06-09simplify previous;Jason McIntyre
2006-06-09proper type and ptdsize checks; had it for three weeks now... sighMichael Shalayeff
2006-06-09set session id and init logging in -s mode. tested by david@ and matthieu@;Otto Moerbeek
ok henning@
2006-06-09{x,}ldcontrolb() codepath is SUN4-only, so don't bother checking for LfsbailMiod Vallat
in mem_access_fault4m.
2006-06-09Simplify ami_disk by chaging some ifs around.Marco Peereboom
2006-06-09Add percentages for BGI and Rebuild. Example:Marco Peereboom
# bioctl -h ami0 Volume Status Size Device ami0 0 Rebuild 1000M sd1 RAID5 8% done
2006-06-09some more fxp revisions.Brad Smith
2006-06-09identify 8139's in C+ mode with RL_8139CPLUS instead of RL_8139; no ↵Brad Smith
functional change.
2006-06-09syncTheo de Raadt
2006-06-09spacing that made a grep look very suspiciousTheo de Raadt
2006-06-08fix usage, make synopsis more pretty. noticed by david@Hans-Joerg Hoexer
2006-06-08attempt at correcting the comments to somewhat more proper englishFelix Kronlage
prodded by uwe@
2006-06-08fix some indentation, noticed by david@Hans-Joerg Hoexer
2006-06-08unsigned long long -> u_int64_tDavid Gwynne
2006-06-08really, this is the correct *.ok output, what was generated in the past wasTodd T. Fries
due to recently fixed code move some ike?? to ikefail?
2006-06-08Add a transport mode specifier to ike rules. Tunnel mode remains the default.Christian Weisgerber
"looks right" hshoexer@
2006-06-08allocate enough storage via sockaddr_storage for sockaddr_in6,Todd T. Fries
fixes ike29.in in regress looks right hshoexer@, ok naddy@
2006-06-08Keep track of the average RSSI using an Exponential Moving Average (EMA).Damien Bergamini
Use it to dynamically tune radio receive sensitivity. The idea is simple: - increase sensitivity when the RSSI is bad to optimize throughput on long distance to the AP, and - decrease sensitivity when the RSSI is good to reduce noise level and optimize throughput on short distance to the AP The EMA allows to smooth RSSI variations so we don't end up changing the sensitivity too frequently. We check if it would be worth updating the sensitivity every one second. RSSI thresholds were taken from the Ralink Tech. Linux driver. Also, clean a few things while I'm here: - account for FCS when determining if RTS protection must be used - fix check for whether WEP encryption is needed or not - encrypt mgmt frames if we need to (shared authmode) - cosmetic tweaks
2006-06-08Fix a typo: When testing for quick mode lifetimes, make sure toHans-Joerg Hoexer
reference quick mode lifetimes, too, not main mode lifetimes. Otherwise we might dereference a NULL pointer...
2006-06-08Add tests for a tiny regression I've just foundHans-Joerg Hoexer
2006-06-08turns out this really doesn't break what is in the tree; ok hshoexer@Todd T. Fries
2006-06-08syncTheo de Raadt
2006-06-08do not set the gid, noted by solar; ok djmMarkus Friedl
2006-06-08bits for armish; ok drahnJason McIntyre
2006-06-08dont panic on empty portfacts or portenable replies. we should probablyDavid Gwynne
retry the init sequence if this happens.