| Age | Commit message (Collapse) | Author | |
|---|---|---|---|
| 2010-02-05 | Now that the BTB errata are out of the way, enable the CS5536 timecounter again, | Miod Vallat | |
| albeit at a lower quality level than on x86, so that the cpu counter-timer gets preferred by default. | |||
| 2010-02-05 | add some USB hardware verified to work; ok miod@ | Otto Moerbeek | |
| 2010-02-05 | add uaudio; ok miod@ | Otto Moerbeek | |
| 2010-02-05 | Blind support for SM501 model. This should give the Gdium Liberty a working, | Miod Vallat | |
| accelerated console. No regression on Lemote Yeelong. | |||
| 2010-02-05 | regen | Miod Vallat | |
| 2010-02-05 | Add SiliconMotion Voyager GX, reportedly found in Gdium Liberty. | Miod Vallat | |
| 2010-02-05 | Add a set of functions to access PCI configuration space before bonito(4) | Miod Vallat | |
| attaches, and use it to walk the PCI bus to figure out where the onboard frame buffer device lies, if any; and get the frame buffer memory address from reading the proper PCI BAR instead of hardcoding it; this should allow the Gdium Liberty to configure its console correctly. | |||
| 2010-02-05 | Blind support for the EMTEC Gdium Liberty netbook. Per-platform configuration | Miod Vallat | |
| is moved to specific files, and a pointer to the key configuration structure is now kept in struct sys_config. bonito(4) interrupt handling is split, to allow PCI+Legacy interrupt systems (Lemote Yeelong) and PCI-only Legacy-free systems (Gdium) to coexist peacefully. | |||
| 2010-02-05 | Compute and pass resource extents to the MI pci code when attaching pci@bonito. | Miod Vallat | |
| 2010-02-05 | When setting up memory regions on Loongson 2F-based machines, make sure we | Miod Vallat | |
| reprogram the existing windows to our needs, in case the PCI->DDR window does not span the whole memory size. While there, introduce a function to reprogram a window for code clarity. | |||
| 2010-02-05 | When faking the glxpcib(4) BARs, do not mask the low 12 bits, but only as | Miod Vallat | |
| many bits as necessary to match the alignment requirements. This prevents all the I/O BARs to end up using the same address. | |||
| 2010-02-05 | regen | Jasper Lievisse Adriaanse | |
| 2010-02-05 | - fix doubles | Jasper Lievisse Adriaanse | |
| 2010-02-05 | Use correct format specifiers for 'show bcstats'. | Joel Sing | |
| ok beck@ krw@ | |||
| 2010-02-05 | Header_lines always has the same value as y_procs; so zap the former; | Otto Moerbeek | |
| from Mark Lumsden. | |||
| 2010-02-05 | regen | Jasper Lievisse Adriaanse | |
| 2010-02-05 | - add few new devices found in dmesglog | Jasper Lievisse Adriaanse | |
| 2010-02-05 | - mention boot.elf | Jasper Lievisse Adriaanse | |
| ok kettenis@ (some time ago) | |||
| 2010-02-04 | xargs -I and -L are XPG4, not POSIX; ok jmc@ | Ingo Schwarze | |
| 2010-02-04 | - fix tyops. | Jasper Lievisse Adriaanse | |
| ok otto@ | |||
| 2010-02-04 | vi-style B, W and E keys in copy mode to navigate between words treating only | Nicholas Marriott | |
| spaces as word separators. Also add . to the list of word separators for standard word navigation. From Micah Cowan, tweaked slightly by me. | |||
| 2010-02-04 | no need for bsd.bin | Otto Moerbeek | |
| 2010-02-04 | Read the path from $TMUX if it is present and -L and -S are not given. Based on | Nicholas Marriott | |
| a diff from Micah Cowan. | |||
| 2010-02-04 | Option to display the active pane in a different colour with the display-panes | Nicholas Marriott | |
| command. From Paul Hoffman, thanks. | |||
| 2010-02-04 | kind of revert previous: above mentioned -> aforementioned | Jason McIntyre | |
| requested by cnst | |||
| 2010-02-04 | basic bootpath -> bootdev translation; ok miod@ | Otto Moerbeek | |
| 2010-02-04 | some more details which are now relavant but should disappear once a | Otto Moerbeek | |
| native bootloader exists; ok miod@ | |||
| 2010-02-04 | add a few USB devices known to work; ok miod@ | Otto Moerbeek | |
| 2010-02-04 | pf_get_sport() picks a random port from the port range specified in a | Stuart Henderson | |
| nat rule. It should check to see if it's in-use (i.e. matches an existing PF state), if it is, it cycles sequentially through other ports until it finds a free one. However the check was being done with the state keys the wrong way round so it was never actually finding the state to be in-use. - switch the keys to correct this, avoiding random state collisions with nat. Fixes PR 6300 and problems reported by robert@ and viq. - check pf_get_sport() return code in pf_test(); if port allocation fails the packet should be dropped rather than sent out untranslated. Help/ok claudio@. | |||
| 2010-02-04 | remove assumption that internal IFSD_LINK* defines are the same as | Kevin Steves | |
| LINK_STATE* defines in <net/if.h>, which were changed Sep 14. this fixes link state down being treated as up. ok claudio@ henning@ | |||
| 2010-02-04 | In event_again() call event_del() before calling event_set() so we | Jonathan Gray | |
| don't get into a situation where we are calling event_set() on an event that was already added. ok claudio@ | |||
| 2010-02-04 | no -S option; from Daniel Dickman | Jason McIntyre | |
| 2010-02-04 | MACHINE_CPU here too; | Jason McIntyre | |
| 2010-02-04 | Added optimization for XY reads, requires only one temp buffer | Jordan Hargrave | |
| 2010-02-04 | Optimized failure handing for Read with X/P failures | Jordan Hargrave | |
| Does not require additional temporary buffer | |||
| 2010-02-03 | Fix divide by zero on small windows with main-* layouts. | Nicholas Marriott | |
| 2010-02-03 | sync | Miod Vallat | |
| 2010-02-03 | loongson relese building bits; ok miod@ | Otto Moerbeek | |
| 2010-02-03 | Remove memory limitation to the low 256MB. With the -mfix-loongson2f-btb | Miod Vallat | |
| workaround in place, the kernel can make use of the whole memory without freezing. | |||
| 2010-02-03 | There is no need to compile this code with .set noat, really. | Miod Vallat | |
| 2010-02-03 | Build the kernel with -mfix-loongson2f-btb. Requires up-to-date binutils. | Miod Vallat | |
| 2010-02-03 | Add a new option to the mips64 gas, -mfix-loongson2f-btb. This option | Miod Vallat | |
| is intended to be used when compiling kernel code which will run on a Loongson 2E or 2F processor, and inserts an explicit BTB clear operation before every jump through a register (jr or jalr instructions), unless that register is k0 or k1, or we are in .set noat. This is a reliable, although aggressive, workaround for the misbehaviour of the branch prediction engine of many Loongson 2F processors with regard to the Branch Translation Buffer, for which an official errata has yet to be published, and for which the Loongson suggested workaround apparently only works due to pipeline side effects, but requires all the executable kernel code to be located in CKSEG0/CKSEG1. These changes are inspired by a backport of the Loongson binutils 2.19 patch to binutils 2.18; the idea of doing an aggressive BTB clear is mine. This causes no functional change to code compiled without the -mfix-loongson2f-btb option. ``looks reasonable'' kettenis@ | |||
| 2010-02-03 | add loongson cachflush.0; ok miod@ | Otto Moerbeek | |
| 2010-02-03 | sync | Otto Moerbeek | |
| 2010-02-03 | sync to new reality | Otto Moerbeek | |
| 2010-02-03 | Provide a value for MACHINE_CPU, to let the build machinery reuse the existing | Miod Vallat | |
| mips64 (big endian) code. Endian-specific differences are handled within mips64 code with proper cpp tests. | |||
| 2010-02-03 | MACHINE_ARCH -> MACHINE_CPU when applicable. | Miod Vallat | |
| ** it is necessary to update make(1) before building now ** | |||
| 2010-02-03 | Use MACHINE_CPU instead of MACHINE_ARCH to pick the correct machine dependent | Miod Vallat | |
| files or directories when applicable. The inspiration and name of MACHINE_CPU come from NetBSD, although the way to provide it to Makefiles is completely different. ok kettenis@ | |||
| 2010-02-03 | If MACHINE_CPU != MACHINE_ARCH, pass -D__${MACHINE_CPU}__ to the preprocessor. | Miod Vallat | |
| ok kettenis@ | |||
| 2010-02-03 | Add a new default variable in Makefile context, MACHINE_CPU. Its value is | Miod Vallat | |
| decided at compile-time and is either MACHINE_CPU from <machine/param.h> if it is defined, or the same value as MACHINE_ARCH otherwise. This will be used to allow ports with suffixes to their canonical MACHINE_ARCH to provide this canonical name as MACHINE_CPU, and in turn to let Makefiles do TRT. ok kettenis@ | |||
 |
index : src | |
| OpenBSD base system |
| summaryrefslogtreecommitdiff |