| Age | Commit message (Collapse) | Author | |
|---|---|---|---|
| 2010-03-16 | Jumbo commit for 4.7 installation instructions: | Miod Vallat | |
| - do not mention tape as an installation media on systems where it is very unlikely that a tape drive can be connected to (i.e. anything with only USB as expansion capabilities) - do not mention that fetching the installation sets from a partition is ``for upgrades only''. You may do this for installation, but of course you can not use a partition which will be newfs'ed for that purpose. - mention ext2fs partitions as possible installation sets source only on platforms where the installation media actually can mount an ext2fs filesystem. - stress the fact that the sparc miniroot image is a GENERIC kernel with a little on-disk filesystem, and not a RAMDISK kernel with a little in-memory filesystem, and thus must not be overwritten during installation (i.e. be careful if you repartition the disk the miniroot has been put on). - more conv=sync -> conv=osync for tape setup instructions. - model-specific layout changes on armish, loongson and socppc instructions. - fix various typos and grammar mistaeks. "sure" deraadt@ (without eyeballing) | |||
| 2010-03-07 | Update sets sizes. | Miod Vallat | |
| 2009-10-10 | Fix a quoting typo in comments | Miod Vallat | |
| 2009-05-13 | Better disk partitioning details, especially for MBR + disklabel or | Miod Vallat | |
| HFS + disklabel setups. | |||
| 2009-05-12 | Try to catch up with installer changes in the installation notes. | Miod Vallat | |
| Also, the per-platform features are moved to a common place, which makes the MD layout easier to work on. m4.common is still a tangled mess of subtly placed dnl, though... | |||
| 2009-04-09 | Don't try to keep in sync with the man page device lists for | Jonathan Gray | |
| 802.11 wireless as chipsets used and products change rapidly, but rather display just a list of the supported chipsets like we do in www. Discussed with jmc and deraadt | |||
| 2009-03-28 | sync the rum(4) and run(4) lists; | Jason McIntyre | |
| 2009-03-27 | update the lists of wireless devices; | Jason McIntyre | |
| 2009-03-14 | run devices, harvested from run.4; | Jason McIntyre | |
| 2009-02-28 | Update sets sizes. | Miod Vallat | |
| 2008-10-16 | Clarify and modernize some language about disk layout and the interactive | Kenneth R Westerback | |
| label editor. Prompted by comments from Rad Ricka. Suggestions from jmc@, deraadt@ and Rad. ok deraadt@ | |||
| 2008-09-11 | +SparkLAN WCFM-100 to the malo(4) list; | Jason McIntyre | |
| 2008-08-19 | +D-Link DWA-110 to the rum(4) list; | Jason McIntyre | |
| 2008-08-11 | +Longshine LCS-8031N to the ral(4) list; | Jason McIntyre | |
| 2008-08-06 | Update sets sizes. | Miod Vallat | |
| 2008-08-06 | Fold text in 80 columns. | Miod Vallat | |
| 2008-08-06 | Foreign partition on MBR partition tables are put in default disklabels | Miod Vallat | |
| from partition `i' onwards, not `h' onwards. | |||
| 2008-08-05 | Better description of the installation steps: | Miod Vallat | |
| - document questions in proper order: hostname before network configuration, DNS only if network is configured, sshd and ntpd, aperture only on machines which need it, serial console only on machines which need it. This is done by splitting the end of OpenBSDCommonURL in various macros, OpenBSDInstallWrapup, OpenBSDInstallAperture, OpenBSDInstallConsole and OpenBSDInstallWrapupPart2. - use the above macros when appropriate, OpenBSDInstallWrapup* being mandatory on all arches. - remove serial console configuration blurb on sparc and sparc64, it is handled by OpenBSDInstallConsole now. | |||
| 2008-07-27 | +I-O DATA WN-G54/CF to the malo(4) list; | Jason McIntyre | |
| 2008-06-29 | +Belkin F5D9050C and sort the list; | Jason McIntyre | |
| 2008-06-13 | sync the wireless list; | Jason McIntyre | |
| 2008-04-01 | +Corega CG-WLUSB2GPX | Jason McIntyre | |
| 2008-03-10 | Suggest vt220 as a TERM value for serial-console-in-an-xterm setup everywhere | Miod Vallat | |
| instead of a mix of vt100 and vt220. | |||
| 2008-03-10 | Sync sets sizes with release bits. | Miod Vallat | |
| 2008-03-09 | +Atlantis Land A02-UP1-W54 | Jason McIntyre | |
| 2008-02-23 | update the list of supported wireless devices; | Jason McIntyre | |
| 2007-11-10 | Mention the Meinberg USB5131. | Marc Balmer | |
| 2007-11-04 | Mention the Meinberg PCI509 card and sort list to make it look like in the | Marc Balmer | |
| manual page. | |||
| 2007-10-08 | Correct name GPS170PCI instead of GPS170. | Marc Balmer | |
| 2007-08-30 | oops; t.stritzky@teles.de noted that we had not yet documented the | Theo de Raadt | |
| install##.iso files; thanks | |||
| 2007-08-02 | add few arch/MACHINE substitutions; ok miod@ | David Krause | |
| 2007-05-28 | create and populate a section on hardware monitoring sensors | Constantine A. Murenin | |
| 2007-05-28 | mention pcn(4) | Martin Reindl | |
| 2007-04-13 | Adjust the malo(4) HW list here as well. | Claudio Jeker | |
| 2007-04-05 | Add acx to the supported HW list and remove the [*] from the malo entries, | Claudio Jeker | |
| they have no meaning in this file. | |||
| 2007-03-09 | some note updates from jsg | Theo de Raadt | |
| 2007-03-01 | Your spring jumbo m4-fu. This time: | Miod Vallat | |
| - mention comp contains an objective-C compiler too. - rewrite InstallPrelude so that it will only output the ``know your drive geometry'' blurb if asked to, and for a specified disk type. Use it for non-IDE and non-SCSI disks only, otherwise the kernel is good enough to do the job without the users' help. - similarily, adapt BootMsgs to make the second part of the geometry blurb optional, and to accept up to three disk types. Use this to report better disk names (i.e. no point saying an scsi disk would show up as sd0 on platforms which can't have scsi disks, or won't be able to boot from them). - in InstallPart4, drop the part about block and fragment sizes in disklabel. The defaults are good, and you won't get to change them unless you switched to expert mode. - the default answer to ``wanna get the ftp mirror list, unzel?'' is ``no'', so pressing enter to get it is not enough anymore (-: | |||
| 2007-02-15 | As noted by Daniel Gruber in PR 5377 Surecom EP-9001-g has multiple | Jonathan Gray | |
| revisions, mention the relevant one. | |||
| 2006-12-29 | Add the newly supported Meinberg radio clocks. | Marc Balmer | |
| 2006-12-19 | Add Meinberg Funkuhren radio clocks. | Marc Balmer | |
| 2006-11-26 | Add all available watchdog timers to i386/hardware, pwdog to macppc/hardware. | Marc Balmer | |
| reminded by miod. | |||
| 2006-08-16 | add pxeboot to i386 and amd64 contents, add ofwboot to macppc. | Alexandre Anriot | |
| help and ok miod@ | |||
| 2006-06-17 | update in regard to cardbus, we support more than just this one TI | Felix Kronlage | |
| chipset, so remove the line stating that. requested by brad@ | |||
| 2006-06-17 | add serial ports attached through PC Cards to the list | Felix Kronlage | |
| requested and ok martin@ | |||
| 2006-05-23 | add netgear fa311 v2; | Jason McIntyre | |
| 2006-05-23 | add the HP ProLiant NC340T PCI-X quad port adapter | Brad Smith | |
| 2006-04-02 | clarify the Encore ENL832-TX model for the Realtek variant. | Brad Smith | |
| 2006-03-05 | mention newer chipsets and HP Intel-based Gigabit NICs | Brad Smith | |
| 2006-02-28 | Update sets sizes; ok deraadt@ | Miod Vallat | |
| 2006-02-16 | Nvidia -> NVIDIA | Brad Smith | |
 |
index : src | |
| OpenBSD base system |
| summaryrefslogtreecommitdiff |