summaryrefslogtreecommitdiff
path: root/etc/etc.armv7
AgeCommit message (Collapse)Author
2017-02-06List openfiles-max explicitly in default /etc/login.conf files. Otherwise,Stuart Henderson
raising openfiles-cur above the implicit -max value (1024 on at least the common arch) results in the setting not being applied at all. Earlier version OK tom@ danj@ ajacoutot@ benno@ krw@ beck@, suggestion about openfiles= from millert@ - changes in this version are to use 1024 for -max rather than 512 to avoid changing the existing hard limit, and just use openfiles= for bgpd/unbound where max and cur are the same value.
2016-09-11syncTheo de Raadt
2016-09-11syncTheo de Raadt
2016-09-08sync after /dev/sound* removalAlexandre Ratchov
2016-09-04regenChristian Weisgerber
2016-09-04Remove the tape block device nodes.Christian Weisgerber
While here, also remove two forgotten descriptions for long obsolete devices.
2016-09-02syncKazuya Goda
2016-09-02Add switch(4) cdev entryKazuya Goda
ok deraadt@ yasuoka@ reyk@
2016-05-29Stop building u-boot kernel and ramdisk images. The kernel make targetsJonathan Gray
are left for now but umg files are no longer built when building releases.
2016-05-28use efiboot in armv7 miniroot imagesJonathan Gray
2016-05-23build armv7 efibootJonathan Gray
2016-05-21regenMark Kettenis
2016-05-21syncTheo de Raadt
2016-05-21Add /dev/openprom.Mark Kettenis
2016-05-21syncTheo de Raadt
2016-05-21Copy dtb files to miniroots and install disk. Increase the ramdisk sizeJonathan Gray
and force long filenames on the first mount of fat 16 filesystems so this works. U-boot scripts have not yet been changed to load these files. ok kettenis@
2016-04-28Replace /dev/bpf[0-9] with /dev/bpf and /dev/bpf0. The /dev/bpf node isMartin Natano
unused for now, but I plan to convert all programs in base to use it in a future diff. /dev/bpf0 is for compatibility with existing binaries and is to be removed after a transition period. ok rpe krw, for the installer part "Let's see it hit the tree." deraadt
2016-04-25regenTed Unangst
2016-04-25burn down the systraceTed Unangst
2016-03-12regen generated files after MAKEDEVs commitsMarc Espie
2015-11-10syncStuart Henderson
2015-11-10syncStuart Henderson
2015-10-23ypcipher isn't supported any more - it was already removed from login.conf(5)Stuart Henderson
and pwd_gensalt.c - so remove it from the default /etc/login.conf files as well. ok millert@
2015-10-23Sync (after tap addition)Claudio Jeker
2015-10-23MAKEDEV bits for tap(4)Claudio Jeker
OK dlg@ mpi@
2015-08-14The disktab attribute 'ty' was used to set D_REMOVEABLE and D_RAMDISKKenneth R Westerback
flags in the disklabel. These flags were discarded in 2006. Remove documentation for and instances of 'ty'. Add instances of 'dt' that were missing. Use 'floppy' as the value of 'dt' for all floppies and 'rdroot' for all boot images/miniroots. Add 'rdroot' to dktypenames and an associated #define DTYPE_RDROOT, since 'dt' values are parsed by matching entries in dktypenames[]. Slightly tweaked part of larger cleanup diff previously ok deraadt@.
2015-08-13'sk', 'cs', 'hs', 'ts' were removed from getdiskbyname() in 2007Kenneth R Westerback
with r1.18. 'rm' and 'il' were removed from getdiskbyname() in 2009 with r1.19. The associated disklabel fields were recycled for other purposes. Another 'harmless' part of the larger disklabel cleanup diff. ok deraadt@ as part of that larger diff.
2015-08-01Make use of u-boot 2015.07's unified wandboard config to provide aJonathan Gray
miniroot to cover all current wandboard variations. Unlike the other imx u-boot configs the wandboard config doesn't search for ext2 only a fat fs. Grow the ramdisk size to fit the extra u-boot files. From Roman Kravchuk.
2015-07-20add class used by the _pbuild user for DPB, ok ajacoutot@Stuart Henderson
2015-07-17enable exynosJonathan Gray
2015-06-29enable vexpressJonathan Gray
2015-06-02Rename the imx miniroot to nitrogen as it creates "6x_bootscript".Jonathan Gray
Add a miniroot for the CuBox-i which needs u-boot at a particular offset in the sd image to boot. Based on changes made by Patrick Wildt in bitrig.
2015-05-20Now all the socs use the same va entry point and don't have anyJonathan Gray
conflicting symbols we can combine the configs. Multiple umg files are still required however. The bsd.umg target in the kernel is replaced by targets for bsd.IMX.umg, bsd.OMAP.umg and bsd.SUNXI.umg.
2015-05-19use the same va entry point on all armv7 socsJonathan Gray
Similiar changes were made in bitrig by Patrick Wildt. As part of this change the physical load address for imx and sunxi have changed. Any u-boot settings that include it will need to be modified. imx: 0x10800000 -> 0x10300000 sunxi: 0x40800000 -> 0x40300000 Tested by bmercer, canacar and myself. ok bmercer@
2015-02-17Add class section for unbound, using openfiles-cur=512 ratherStuart Henderson
than the daemon class' default of 128. Reminded by/ok ajacoutot@
2015-01-26Rename miniroot-sunxi to miniroot-cubie as the u-boot includedJonathan Gray
in the image is for Cubieboard1. Discussed with bmercer@ While here switch from using the separate spl and u-boot images to the combined spl and u-boot 'u-boot-sunxi-with-spl.bin'.
2014-12-11regenTed Unangst
2014-12-11remove urioTed Unangst
2014-10-09regenTed Unangst
2014-10-09delete all the cry devices too. missed by mikeb previously.Ted Unangst
2014-10-09remove lkmTed Unangst
2014-08-20Remove userland bits related to the crypto(4) interface; ok deraadtMike Belopuhov
2014-07-11regenTed Unangst
2014-07-11no bthubTed Unangst
2014-04-22Remove the kerberos login methods.Reyk Floeter
ok henning@
2014-03-26end experimental login.conf template support. one file per machine.Ted Unangst
ok deraadt millert
2014-03-05some files were not being hashes, because they were missing from MDEXTTheo de Raadt
noticed by jsg, and important enough to make release
2014-01-05syncTheo de Raadt
2014-01-05We need /dev/random on the install mediaTheo de Raadt
discussed with rpe and halex
2013-11-21regenMark Kettenis
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-20 18:22:17 +0000