summaryrefslogtreecommitdiff
path: root/regress
AgeCommit message (Collapse)Author
2009-08-04Add regress tests with IPv4 and IPv6 addresses for the srcid and/or dstid.Joel Sing
ok hshoexer@
2009-07-06don't test unspecified behavior per ISO C (section F.4). this madeMartynas Venckus
machines following IEC/IEEE for fp arith fail, since they take more care of overflowed value. failure on zaurus reported by david@. ok millert@
2009-06-30add "-o none" to pfctl call to prevent automatic table creation ofDavid Krause
multiple addresses which causes the test to fail; ok sthen@
2009-06-30update after the "reassemble tcp" fix (kernel/6178); ok sthen@David Krause
2009-06-26check that dumpdef still works after undefining macros, and not dumps core.Marc Espie
problem found by Philip Guenther.
2009-06-24fix this regression test; "reassemble tcp" should be in this locationStuart Henderson
in the output. this test currently fails; see kernel/6178
2009-06-21fix rcs ids. ok sthen@Martynas Venckus
2009-06-20Repair comment ID & typo, no binary changeIan Darwin
2009-06-09make the regress target build the program before using it.Peter Hessler
OK millert@, deraadt@
2009-06-09Update to handle the default resolv order behavior.Peter Hessler
Add a note that the regress depends on the "family" keyword in resolv.conf OK millert@, deraadt@
2009-05-18sync with netbsd; no change for openbsd usersJason McIntyre
from wiz
2009-05-14handle the new require-order default of "no" in existing tests, and addStuart Henderson
a new test to check it's working correctly. ok deraadt@
2009-05-05Always specify ssh_config for multiplex tests: prevents breakage causedDarren Tucker
by options in ~/.ssh/config. From Dan Peterson.
2009-04-26- check equality with '==', from skreuzer@exit2shell.comOkan Demirmen
- unbreak, since -r was removed from disklabel(8) ok otto@
2009-04-13document -w; ok espie wiz@netbsdJason McIntyre
2009-04-13Add myself to AUTHORS list, as suggested by Thomas.Marc Espie
Always cool to see email addresses @netbsd/@openbsd in the same program ;)
2009-04-13A few tweaks:Marc Espie
- display only section headers in warning messages if -w (asked by jmc@) - better fix option: have process_line return the processed line, and use that info. - return proper line for comments (noticed by Thomas Klausner) - let more code run always, only display warnings when wanted - sorting of see also should be case-insensitive (noticed by jmc@)
2009-04-10Add EX_CONFLICTOK flag that allows an allocation to conflict with existingMark Kettenis
allocations, making sure that the union of all space is allocated. ok deraadt@
2009-04-09add fpaccuracyMartynas Venckus
2009-04-09fpaccuracy, by prof. Gaston H. Gonnet, uses some most difficultMartynas Venckus
values to test accuracy of math functions (currently, only double precision tests are present) a report summary (fpaccuracy.out) containing max errs in ulp is generated originally under gpl. consented to relicense it under our license ok millert@
2009-04-08adapt lint regress after time.h r. 1.24 "sounds fine" millert@. ok chl@Martynas Venckus
cloder@'s email bounces
2009-04-06more scrub scrubbingHenning Brauer
2009-04-06scrub goneHenning Brauer
2009-03-14Add mips64 and sh support to this test.Miod Vallat
2009-02-18Test to show glob bug introduced with POSIX char class support.Todd C. Miller
2009-02-18Add missing CURDIRTodd C. Miller
2009-02-17Link lazy binding test into ld.so regress suite.Joel Sing
ok matthieu@
2009-02-15Add an ENAMETOOLONG test case for copyinstr(), inspired by sthen@'s code.Joel Sing
ok sthen@ miod@
2009-01-30If the "peer" address is not specified or derived from "to" forAlexander Bluhm
"ike" rules in ipsec.conf, the default peer is used. In theory ipsecctl -f ipsec.conf can configure the default peer for each "ike" entry. As isakmpd only supports one default peer, the last "ike" rule that uses a default peer wins. This configuration is then significant for all "ike" rules that use the default peer. Now a warning is printed if a later rule in ipsec.conf changes the configuration of the original default peer. This should be an error but that would break existing user configs. So only a warning is printed. ok hshoexer@, todd@
2009-01-29pass "xerrok" status across the execution call stack to more closelyJared Yanovich
match what both POSIX and ksh.1 already describe in regards to set -e/errexit's behavior in determining when to exit from nonzero return values. specifically, the truth values tested as operands to `&&' and `||', as well as the resulting compound expression itself, along with the truth value resulting from a negated command (i.e. a pipeline prefixed `!'), should not make the shell exit when -e is in effect. issue reported by matthieu. testing matthieu, naddy. ok miod (earlier version), otto. man page ok jmc.
2009-01-29Remove ikefail10 ipsecctl regression test as it always fails. ItAlexander Bluhm
was expecting a certain parser error message. Accepting the ikefail10 config file is not considered to be a bug anymore. ok hshoexer@
2009-01-28Allow to specify ike and flow explicitly without peer. The anyAlexander Bluhm
keyword as argument for the peer parameter will do that. An ike without peer creates the peer-default config. A flow without peer acquires a host-to-host SA. tested by grunk@, todd@, ok grunk@, hshoexer@, todd@
2009-01-20Regression tests for source flow NAT support.Marco Pfatschbacher
OK hshoexer@, markus@.
2009-01-19Do not use "egress" keyword as it expands to an actual interface,Hans-Joerg Hoexer
which might be different on different machines. Use some fixed addresses instead. pointed out and ok david@
2008-12-31reorg code a bit so that we can share with Thomas Klausner:Marc Espie
use OPENBSD/NETBSD constant to choose the behavior, and have the same program in both OSes. Also some minor cleanups, like no longer needing to check for comments that have been stripped already. work with wiz@netbsd.org and jmc@
2008-12-22add regression test for aes-{128,192,256} being used with main and quickHans-Joerg Hoexer
mode.
2008-12-22Adopt to recent change: /32 now is treated as a network address.Hans-Joerg Hoexer
prodded by david@
2008-12-17add a writable ``appbufsz'' field to the sa_par structure, containingAlexandre Ratchov
the program-part of the buffer size, ie the part that is subject to underruns. Useful for apps like cdio(1) that don't have their own rings, or to apps that have a minimum ring size constraint. Setting the ``bufsz'' parameter becomes deprecated. ok jakemsr
2008-12-12fix test 37 (from NetBSD) and the (still failing) 41Otto Moerbeek
2008-12-11reorg code so that it can be cut further.Marc Espie
discussed with jmc@ and Thomas Klausner (wiz@netbsd.org)
2008-12-09add vol/ to SUBDIRSAlexandre Ratchov
2008-12-09also test rintlMartynas Venckus
2008-12-07match string "passwordauthentication" only at start of line, not anywhereDamien Miller
in sshd -T output
2008-11-24new regress test, bug from NetBSDMarc Espie
2008-11-23expand -p to warn about "new sentence, new line" errors;Jason McIntyre
from wiz@netbsd
2008-11-20add (atm failing ) test case, submmited by Edward Berner, turned intoOtto Moerbeek
a regress test by me
2008-11-11expose a volume knob in the sndio API: add sio_setvol(3) andAlexandre Ratchov
sio_onvol(3) functions. The audio(4) backend tries to use the inputs.dac, outputs.dac, outputs.output and outputs.master controls (in this order). Add a sample file in regress/lib/libsndio/vol/vol.c
2008-11-10PuTTY supports AES CTR modes, so interop test against them tooDamien Miller
2008-11-07clean-up regexps, replacing some . (any char) with \. (actual dot),Marc Espie
adding grouping parentheses, compiling whatever's compilable with /o, restricting words with word boundaries. /b okay grunk@, jmc@ (with help from jmc@) #10000 ! Oddly fitting, as my first commit was concerned with manpages as well...
2008-11-03handle Xrefs to XFree as wellMarc Espie
okay grunk@, jmc@
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-18 10:04:25 +0000