| Age | Commit message (Collapse) | Author |
|---|
|
This is also the same as the Intel Series 5 Thermal Sensor.
ok deraadt@, kettenis@
|
|
QinQ-compliant svlan (service VLAN) interfaces are implemented as
a new cloner type, use Ethernet type 0x88a8, and have a dedicated
VLAN tag hash to avoid ID conflicts. vlan(4) interfaces can be
stacked on top of svlan(4).
Originally from reyk@, input from claudio@ and deraadt@
ok claudio@
|
|
<madroach@zakweb.de>.
SiS 191 is not verified to work yet because he does not have the hardware;
if anyone has it, please contact him.
|
|
Driver written by Mikko Tolmunen <oskari@sefirosu.org>
|
|
|
|
It provides an Ethernet transport typically over EDGE or 3G on
cellphones similar to what cdce(4) does on other phones. It is
likely to work with most of HTC's recent and coming Android based
phones but a bunch of other things (phones in particular) may use
it.
Started by me; brought to a working state by Jonathan Armani and
Fabien Romano over the past week, with some input and additions
from me.
Tested on i386 and macppc by me (HTC Hero), amd64 by Jonathan and
Fabien (HTC Hero), and by gilles@ (HTC Magic) on i386 or amd64.
It still has a few kinks to work out, but it works well enough that
I can commit this over my HTC Hero.
`commit it!' deraadt
|
|
ok deraadt@
|
|
OK miod@
|
|
|
|
(and remove a duplicate entry in Makefile)
|
|
Man page advices by jmc@.
|
|
'just go ahead' deraadt@
|
|
|
|
written from scratch based on the vendor driver for Linux (ath9k).
AR9285 and AR9287 parts are 100% untested.
only basic functionnalities are enabled for now.
committed over an AR9281.
"commit" deraadt
|
|
so that a bridge-etherip-tunnel host can join into the bridge itself.
It is ridiculous that this capability was missing from our network
stack portfolio, considering we have bgp and ospf daemons...
discussed at length with claudio
|
|
|
|
- queue packets from pf(4) to a userspace application
- reinject packets from the application into the kernel stack.
The divert socket can be bound to a special "divert port" and will
receive every packet diverted to that port by pf(4).
The pf syntax is pretty simple, e.g.:
pass on em0 inet proto tcp from any to any port 80 divert-packet port 1
A lot of discussion have happened since my last commit that resulted
in many changes and improvements.
I would *really* like to thank everyone who took part in the discussion
especially canacar@ who spotted out which are the limitations of this approach.
OpenBSD divert(4) is meant to be compatible with software running on
top of FreeBSD's divert sockets even though they are pretty different and will
become even more with time.
discusses with many, but mainly reyk@ canacar@ deraadt@ dlg@ claudio@ beck@
tested by reyk@ and myself
ok reyk@ claudio@ beck@
manpage help and ok by jmc@
|
|
|
|
Sorry.
|
|
- queue packets from pf(4) to a userspace application
- reinject packets from the application into the kernel stack.
The divert socket can be bound to a special "divert port" and will
receive every packet diverted to that port by pf(4).
The pf syntax is pretty simple, e.g.:
pass on em0 inet proto tcp from any to any port 80 divert-packet port 8000
test, bugfix and ok by reyk@
manpage help and ok by jmc@
no objections from many others.
|
|
|
|
|
|
this driver was written by Pyun YongHyeon from FreeBSD.
"go ahead" deraadt@
|
|
- clean up the page a little while there
help/ok miod
|
|
|
|
|
|
DL-120 / DL-160 graphic chips, using the wsdisplay(4) layer. Based on
the reversed engineered specifications of Florian Echtler. The driver
is disabled in GENERIC for now.
Thanks to claudio@ for donating me a device and to oga@ and miod@ for
giving me hints in the graphic and wsdisplay area.
OK deraadt
|
|
ok jmc, kettenis
|
|
sensor. Based on msts(4). Tested with Praecis Ct
(http://www.endruntechnologies.com/network-time-source.htm).
help and feedback mbalmer
'no problem with this sensor going in' deraadt
|
|
|
|
more work is required but basic operations work.
requires a non-free firmware to operate.
partly based on source code released under the ISC by Atheros
Communications for Linux, although I had to rewrite almost everything
(actually I only used some .h files from the Atheros driver.)
there also exists a rewrite of the Atheros driver for Linux (ar9170)
but the guy decided to make the code less free by wrapping the GPL
around the ISC.
committed over a NETGEAR WNDA3100.
ok deraadt@
|
|
written by Pyun YongHyeon for FreeBSD, ported to DragonFlyBSD
by Sepherosa Ziehau and then ported to OpenBSD by me.
ok deraadt@
|
|
|
|
|
|
environment sensors. These are found at least on VIA Epia SN18000G
boards.
Not enabled at 0x162e and 0x164e because probing these may not be
safe according to kettenis (guess where my schsio is).
Much help from kettenis. Input from const and fgs.
ok kettenis
|
|
|
|
the driver supports legacy 802.11abg modes only (no 802.11n yet.)
WPA works, with hardware encryption/decryption.
committed over an RT2800U (RT2870+RT2820).
enabled on i386 and amd64 GENERIC only for now.
thanks to Paul Lin at Ralink for letting us ship the firmware under an
appropriate license.
"man page looks ok" jmc@
"you should commit it" jsg@, ok deraadt@
|
|
- update SYNOPSIS
ok oga
|
|
|
|
|
|
|
|
802.11 devices.
currently it has issues scanning.
ok jsg@
|
|
ok oga
|
|
|
|
|
|
|
|
and JMicron JMP202/JMP211 Ethernet PHYs.
Written by Pyun YongHyeon for FreeBSD, ported to DragonFlyBSD
by Sepherosa Ziehau and then ported to OpenBSD by me.
Thanks once again to JMicron for supplying hardware and
information which made this possible.
Some cleanup still needs to be done, and checksum offload
needs to be sorted out, but the driver otherwise seems
to work great. Comitted over a JMC250 card.
|
|
|
|
|
|
|
