summaryrefslogtreecommitdiff
path: root/sys/arch/armv7/conf/RAMDISK
AgeCommit message (Expand)Author
2017-10-08Enable rkiic(4) and rkpmic(4) for Rockchip RK3288 boards.Mark Kettenis
2017-09-21Enable dwxe(4) on armv7 as well for use on the Allwinner H3 SoC.Patrick Wildt
2017-08-27Add mvpxa(4), a driver for the SDHC compliant controller onPatrick Wildt
2017-08-27Enable generic sdhc(4) on FDT attachment driver.Patrick Wildt
2017-08-25Add mvneta(4), a driver for the Ethernet controller on the ArmadaPatrick Wildt
2017-08-25Add mvmpic(4), a driver for the interrupt controller that sits betweenPatrick Wildt
2017-08-25Add mvpinctrl(4), a driver to configure pins on Marvell SoCs. For now,Patrick Wildt
2017-07-25Enable dwdog(4) such that Rockchip RK3288 devices can reboot.Mark Kettenis
2017-07-25Add rkclock(4), rkgrf(4), rkpinctrl(4) and rkgpio(4). This makes OpenBSDMark Kettenis
2017-07-24Enable pcxrtc(4).Mark Kettenis
2017-07-23Add sxitwi(4), a driver for the (i2c compatible) two-wire bus found onMark Kettenis
2017-07-05Enable NFSCLIENT to let installation over NFS work.Visa Hankala
2017-05-21Add support for the SD/MMC controller found on Samsuung Exynos5.Mark Kettenis
2017-03-24Implement a driver for Marvell's AHCI controller. This is in essencePatrick Wildt
2017-03-24Implement a driver for Marvell's XHCI controller. This is in essencePatrick Wildt
2017-03-12Hook exclock(4) up to the clock framework using a dummy implementation thatMark Kettenis
2017-03-12Enable exdwusb(4) and xhci(4).Mark Kettenis
2017-03-11Enable exrtc(4).Mark Kettenis
2017-03-09Enable syscon(4) such that I can actually reboot the Odroid XU4.Mark Kettenis
2017-03-06De-platformize exynos. Disable exdisplay(4) for now.Mark Kettenis
2017-03-06Attach exiic(4) using the FDT.Mark Kettenis
2017-03-05match GENERICTheo de Raadt
2017-03-04matching commit for RAMDISK: Convert a few exynos drivers to attach using the...Theo de Raadt
2017-03-03enable FFS2 on armv7 and arm64 ramdisksJonathan Gray
2017-03-01Dynamically attach edma(4) using the FDT.Jonathan Gray
2017-01-23enable bcmdog on armv7 as wellJonathan Gray
2016-10-23De-platformize sunxi. This removes the board initialization code that sets upMark Kettenis
2016-10-22Attach sxitimer(4) using the fdt.Mark Kettenis
2016-10-21Implement a driver for Marvell's Mbus bridge. This is the componentPatrick Wildt
2016-10-09Add psci(4) a driver for the reset and power down portion of theJonathan Gray
2016-10-09Attach sxiccmu(4) using the fdt.Mark Kettenis
2016-10-09Remove the vexpress platform abstraction and board id. All the devicesJonathan Gray
2016-10-08Attach sxipio(4) using the fdt.Mark Kettenis
2016-10-08Dynamically attach sysreg(4) using the FDT.Jonathan Gray
2016-10-07Implement a driver for Marvell Armada's clock gates. This basicallyPatrick Wildt
2016-10-07Support the Marvell Armada's System Controller to be able to resetPatrick Wildt
2016-10-07Add a driver for the Marvell Armada 380 core clock. This driverPatrick Wildt
2016-10-05Make imxdog(4) set cpuresetfn, and remove all the imx platform that is noMark Kettenis
2016-10-03Disable sitaracm and add a new ompinmux driver for omap pin muxing/padJonathan Gray
2016-09-23Attach imxocotp(4) using the fdt. Since this means that imxtemp(4) attachesMark Kettenis
2016-09-18Convert imxccm(4) and imxiomuxc(4) to attach using the fdt. Use the "early"Mark Kettenis
2016-09-15Add omwugen(4) a driver for the TI logic that generates wakeup eventsJonathan Gray
2016-08-21Dynamically attach exuart using the FDT.Jonathan Gray
2016-08-20Enable sximmc(4).Mark Kettenis
2016-08-20Replace bcmmuart(4) with com(4).Mark Kettenis
2016-08-20sxiuart(4) has been replaced with com(4).Patrick Wildt
2016-08-17Replace sxiuart(4) with the mostly compatible com(4).Patrick Wildt
2016-08-13Add the shim to make dwge(4) attach to simplebus(4). This brings usMark Kettenis
2016-08-11Dynamically attach omgpio(4) using the FDT.Jonathan Gray
2016-08-11Dynamically attach omehci using the FDT.Jonathan Gray
generated by cgit v1.2.3 (git 2.25.1) at 2025-01-16 18:33:32 +0000