| Age | Commit message (Collapse) | Author |
|---|
|
scsi?" rule, similar to how ethernet PHY drivers attach at mii.
Discussed on icb.
|
|
might need network (ie. nfs). Move the call to the MD boot() routines.
This cause for boot hangs diagnosed by kettenis.
|
|
As discussed on icb: remove the comment,
remove pmap_remove (uvm_km_free does that for us).
ok oga@, deraadt@
|
|
for now; that is unlikely to hit some of the remaining starvation bugs.
Repair the bufpages calculation too; i386 was doing it ahead of time
(incorrectly) and then re-calculating it.
ok thib
|
|
The new world order of pmemrange makes this data completely redundant
(being dealt with by the pmemrange constraints instead). Remove all code
that messes with the freelist.
While touching every caller of uvm_page_physload() anyway, add the flags
argument to all callers (all but one is 0 and that one already used
PHYSLOAD_DEVICE) and remove the macro magic to allow callers to continue
without it.
Should shrink the code a bit, as well.
matthew@ pointed out some mistakes i'd made.
``freelist death, I like. Ok.' ariane@
`I agree with the general direction, go ahead and i'll fix any fallout
shortly'' miod@ (68k 88k and vax i could not check would build)
|
|
- add nearbyint, nearbyintf and nearbyintl implemented using fenv
|
|
what the previous IO was. Less chance of copy and paste errors.
Suggested by miod@.
|
|
are past. Use CLR() and SET() to modify necessary flags while leaving
the flags used by the buffer cache in peace.
Should make bufcache code much less confused about the state of the
bufs used in reading/writing disklabels. Other such flag abuses no
doubt await a visit.
Errors in original diff found by miod@.
ok beck@ deraadt@
|
|
using the -MD option to cc, with -MP, -MT, and -MF where needed, converting
"make depend" to a no-op. This increases parallelism for those using "make -j"
and keeps the dependencies up to date with each compilation automatically.
sparc and vax users will need to rebuild gcc with support for the
-M[PTF] options before config'ing with this diff.
|
|
ok matthew@ tedu@, also eyeballed by at least krw@ oga@ kettenis@ jsg@
|
|
some time, and return errnos instead. Fix or remove out-of-date comments
mentioning the error strings, and make their callers check the return value
against zero, not NULL.
|
|
Discussed and okay drahn@. Okay deraadt@.
|
|
after every disklabel read or write. This keeps the DUID cache more
in sync with the physical world. De-syncing noted by drahn@ while
zapping disklabels with dd.
ok jsing@ deraadt@
|
|
"doesn't hurt" deraadt@
|
|
instead of assuming it is ``everything below the kernel image''.
|
|
|
|
|
|
since a large part of the structures and logic remains.
Since m88k has separate supervisor/user spaces, we can map physical memory 1:1
in supervisor space, and have the kernel virtual address space start from the
end of physical memory.
This allows us to switch to __HAVE_PMAP_DIRECT. And to get rid of the double
mapped sdt, since now their virtual and physical addresses will always match.
The upper bound of the kernel virtual memory space is now platform dependent,
until the code which relies upon some hardware devices being mapped 1:1 in
supervisor mode is updated to no longer require this (this is mainly a PITA on
luna88k, where onboard devices start at 0x40000000, leaving only 1GB of KVA at
the moment - still much better than the previous 512MB).
Tested on mvme88k only (187, 188, 197LE, 197DP). Other platforms ought to
work, aviion will be checked shortly and fixed if necessary. No known
OpenBSD/luna88k system in working condition at the moment.
|
|
in some grief. Split this out.
From Vladimir Kirillov
|
|
a physical address [more precisely, something suitable to pass to pmap_enter()'sphysical address argument].
This allows MI drivers to implement mmap() routines without having to know
about the pmap_phys_address() implementation and #ifdef obfuscation.
|
|
the one used by the firmware, which (at least on mvme88k) is at address zero.
This is unfortunate, since this means that NULL pointer dereferences in the
kernel are not caught, and writes cause havoc.
This behaviour was necessary to be able to use the PROM system call interface
during early bootstrap, without having to disassemble the VBR page and
update branches - which use pc-relative displacement - if we were to use
a different VBR address.
On mvme88k, change this and actually set up two VBR pages: one, over the PROM
page (except for the system call vectors), and another one in the kernel
image (which will be mapped read-only). We'll run with the PROM page until
the end of autoconf, and then switch to the kernel one, and unmap all the
PROM below it.
As a bonus, the final kernel page can use optimized data access fault
handlers, which do not have to check for faults caused by badaddr(), since
badaddr() is only used during device probe on buses which do not support
hotplug.
There are a few infrastructure collateral damage on aviion and luna88k, but
these ports do not change their behaviour yet.
|
|
tested on a GENERIC config from all arches.
ok deraadt@ miod@
|
|
early MD and late MI files must be split up so that vers.o can sneak
between. Issue spotted by bluhm, repair discussed with miod
|
|
having it linked last is bad (on at least i386 and amd64) because the lapic
is mapped over the start of the data segment -- savecore(8) then reads the
version string for a fixed buffer space, and reads into the lapic area
causing unintended side-effects (at least on Intel X5570 and X5680)
found by pedro, discussed with kettenis and mpf and miod
|
|
This has never happened and this wouldn't make much sense on anything but
hp300, if at all, nowadays.
|
|
ok krw@ deraadt@
|
|
.h files into the ctags run as well to bring #define's and structs and
such into scope. Problem reported by thib
|
|
|
|
OK dlg@
|
|
hierarchy. Everything attached to a single root node anyway, so at
best we had a bush.
"i think it is good" deraadt@
|
|
General huzzahs.
"go for it" deraadt@
|
|
ok deraadt matthew millert
|
|
max-baud-rate hint. Adjust TTYHOG (the nearly full logic) to this new
situation. The larger buffers are required by the very high speed
KDDI devices in Japan (CF com, or USB ucom) so those are the only two
drivers which currently ask for a larger buffer size.
ok yasuoka miod
|
|
|
|
which contains the constraints for DMA/memory allocation for each
architecture, and dma_constraints which contains the range of addresses
that are dma accessable by the system.
This is based on ariane@'s physcontig diff, with lots of bugfixes and
additions the following additions by my self:
Introduce a new function pool_set_constraints() which sets the address
range for which we allocate pages for the pool from, this is now used
for the mbuf/mbuf cluster pools to keep them dma accessible.
The !direct archs no longer stuff pages into the kernel object in
uvm_km_getpage_pla but rather do a pmap_extract() in uvm_km_putpages.
Tested heavily by my self on i386, amd64 and sparc64. Some tests on
alpha and SGI.
"commit it" beck, art, oga, deraadt
"i like the diff" deraadt
|
|
it defines. In some cases, this means pulling in uvm.h or pcb.h
instead, but most of the inclusions were just noise. Tested on
alpha, amd64, armish, hppa, i386, macpcc, sgi, sparc64, and vax,
mostly by krw and naddy.
ok krw@
|
|
ok deraadt@
|
|
|
|
prefer binutils-compatible options in STRIPFLAGS (now that our non-binutils
strip(1) can handle them too)
ok drahn; miod kettenis (for parts)
|
|
a fat kernel (GERERIC or GENERIC.MP) into a temporary dir, then extract some
variables using make -V, and after some more singing and dancing use this
full and (more) correct list of files with ctags. Don't read this code.
ok guenther
|
|
to genassym.sh
ok deraadt
|
|
|
|
the differences between these files. You will need a newer config(8) binary
to be able to build kernels.
ok kettenis miod
|
|
result: kernels built without 'make depend'-provided information
(ie. the .depend file) are more likely to have their *.[Ss] file
compilations track changes to *.h files.
The "*.o: assym.h" dependencies listed are gotten from reading the
.depend output --- from the biggest kernel possible (ie. GENERIC.MP).
When an architecture changes in a substantial way (new .[sS] files),
the list should be updated in the prettiest way possible.
This is not encouraging people to skip 'make depend'; other issues are
not resolved and may be solved later with a change guenther is working
on. You can still screwed really easily, so continue running make
depend as config tells you.
Idea from a discussion with drahn
ok drahn, kettenis likes the idea too
|
|
idea that came out of discussion with drahn
|
|
delete the archaic links: target which is easily misused
handle special .[sS] files in a portable way
|
|
support for the non-binutils architectures (and that diff is coming..)
|
|
ok various people, tested by fewer people, tested by me on 15.
|
|
On AViiON systems with the 6:1 CMMU:CPU configuration, force cached
mappings to be writethrough - this probably hides a bug in the code, but
that's the only way so far to get such a system running stably.
|
|
Makefile.* files
|
