summaryrefslogtreecommitdiff
path: root/sys/arch/hp300/dev
AgeCommit message (Collapse)Author
2011-04-02Iopoolification.Kenneth R Westerback
ok dlg@ "I'm interested" miod@
2010-12-26Kill pmap_phys_address(), and force every driver's mmap() routine to returnMiod Vallat
a physical address [more precisely, something suitable to pass to pmap_enter()'sphysical address argument]. This allows MI drivers to implement mmap() routines without having to know about the pmap_phys_address() implementation and #ifdef obfuscation.
2010-09-22All users of physio(9) now pass NULL as the buf pointer argument, soMatthew Dempsky
no point in keeping it around. "i like this" thib@ (a while back); ok krw@ and oga@; reminder to update the man page and tweaks jmc@
2010-09-20Get rid of evcount's support for arranging counters in a treeMatthew Dempsky
hierarchy. Everything attached to a single root node anyway, so at best we had a bush. "i think it is good" deraadt@
2010-09-08Store a struct device pointer within struct disk and populate this whenJoel Sing
disk_attach() is called by the device driver. We will be building on this shortly. ok deraadt@ krw@
2010-09-06- spello, short-hand -> shorthandJasper Lievisse Adriaanse
ok miod@
2010-07-10Eliminate two of the remaining three instances of drivers passingMatthew Dempsky
their own buf to physio(9). compiler tested by nick@ and miod@; ok miod@ general approval thib@, deraadt@
2010-07-02Move common code for waking up writers on a tty into a function.Nicholas Marriott
ok deraadt matthew millert
2010-06-30Make this compile after TTYHOG definition change (but the logic should be fixedMiod Vallat
to not depend on it).
2010-06-28Remove all adapter-specific 'struct scsi_device's. They are never used. FirstKenneth R Westerback
step in elminating 'struct scsi_device' entirely. Spotted and initial diff from matthew@. ok matthew@ dlg@ deraadt@ marco@ miod@
2010-06-28Allow tty drivers to request larger buffers at attach time using aTheo de Raadt
max-baud-rate hint. Adjust TTYHOG (the nearly full logic) to this new situation. The larger buffers are required by the very high speed KDDI devices in Japan (CF com, or USB ucom) so those are the only two drivers which currently ask for a larger buffer size. ok yasuoka miod
2010-06-26Don't #include <sys/user.h> into files that don't need the stuffPhilip Guenthe
it defines. In some cases, this means pulling in uvm.h or pcb.h instead, but most of the inclusions were just noise. Tested on alpha, amd64, armish, hppa, i386, macpcc, sgi, sparc64, and vax, mostly by krw and naddy. ok krw@
2010-05-23add dkio.h to the last of the disk ioctl users i can find.David Gwynne
requested by deraadt@ who was rightly disparaging of my grep skillz.
2010-05-22remove the last #ifdef hp300, and unused hp700 code as well; ok miodTheo de Raadt
2010-05-20New scsi code seems to be stable. Pluck previously identifiedKenneth R Westerback
low-hanging splbio/splx pairs that are no longer needed and see if this reveals any hidden scsi flaws. ok dlg@
2010-04-23Recycle unused disklabel fields in order to create a disklabel uniqueJoel Sing
identifier, allowing the disk to be identified without relying on the device name. ok deraadt@ krw@ beck@ marco@ todd@
2010-04-15Turn DIO_INHOLE() into a function, returning the next select code to probe at;Miod Vallat
and skip function codes 132 to 135, inclusive, on models 362 and 382 - this is a fake DIO device probably intended to let non-SGC aware (i.e. legacy) HP-UX lowlevel code be able to ``detect'' a frame buffer. This change (as well as letting sgc attach) is untested due to the lack of any 3x2 hardware, but shouldn't make things worse.
2010-04-15Let sgc(4) attach on models 362 and 382 - recent documents uploaded toMiod Vallat
bitsavers confirm the long suspicion the onboard frame buffer on these machines is an SGC device.
2010-04-12Some of the line disciplines want to check for suser. Better to pass themTed Unangst
a process instead of using curproc. ok deraadt
2010-04-04Fix build after spc_scsi_cmd() prototype change.Miod Vallat
2010-03-23Change the scsi_cmd function member of scsi_adapter from int toKenneth R Westerback
void. Use XS_NO_CCB error in the scsi command (xs) to report the NO_CCB condition. Eliminates all SUCCESSFULLY_QUEUED and COMPLETE confusion and untangles the midlayer from the adapter a bit more. Eyes and some fixes by miod@ There may be some compile issues on little used (i.e. I don't have any) drivers but the change is mechanical and thus easy to remedy. ok dlg@
2010-01-13Remove a few more settings of ITSDONE in drivers. Only a coupleKenneth R Westerback
more to go. Should be a no-op.
2009-11-09Every selwakeup() should have a matching KNOTE() (even if kqueue isn'tNicholas Marriott
supported it doesn't do any harm), so put the KNOTE() in selwakeup() itself and remove it from any occurences where both are used, except one for kqueue itself and one in sys_pipe.c (where the selwakeup is under a PIPE_SEL flag). Based on a diff from tedu. ok deraadt
2009-11-01Move IS[12]BYTEMSG and ISEXTMSG defines to a common place.Federico G. Schwindt
Pointed out by miod@. krw@ miod@ ok.
2009-11-01Call selwakeup()/KNOTE() even if the queue has emptied completely.Nicholas Marriott
ok miod
2009-10-31Use suser when possible. Suggested by miod@.Federico G. Schwindt
miod@ deraadt@ ok.
2009-10-31Add missing KNOTE() calls after selwakeup(), until we decide if the KNOTE()Theo de Raadt
calls can go directly into selwakeup() safely long discussion with nicm, murmers of consent from tedu and miod, noone else seems to care of kqueue is busted as long as it makes their sockets move data fast... pretty sad.
2009-09-18Make sure to always initialize the scsi_xfer timeout with timeout_set() earlyMiod Vallat
in spc_scsi_cmd(), so that it is safe to pass it to timeout_del() anytime (recent scsi changes no longer cause the scsi_xfer timeout to be in an initialized state).
2009-09-05Change the wsdisplay_emulops return types from void to int; emulops will nowMiod Vallat
return zero on success and nonzero on failure. This commit only performs mechanical changes for the existing emulops to always return zero.
2009-08-24- fix format strings for values that are daddr64_tJasper Lievisse Adriaanse
ok otto@, agreed by deraadt@
2009-08-16Update to cope with new readdisklabel() return value.Miod Vallat
2009-07-30timeout_add -> timeout_add_msec + associated cleanupBret Lambert
ok miod@
2009-07-26timeout_add -> timeout_add_msecBret Lambert
ok miod@
2009-07-23timeout_add -> timeout_add_msecBret Lambert
ok miod@
2009-07-23timeout_add -> timeout_add_msecBret Lambert
ok miod@
2009-07-23a trio of timeout_add conversionsBret Lambert
ok miod@
2009-06-13Needs <sys/malloc.h> nowMiod Vallat
2009-06-04Add DIOCRLDINFO to those drivers previously deprived.Kenneth R Westerback
Noticed by & ok deraadt@
2009-02-16Extend the scsi_adapter minphys() callback to take a struct scsi_link *Miod Vallat
as additional argument. This will allow intermediate layers between scsi devices such as sd and scsi host adapters to take appropriate action if necessary.
2009-02-06Split sti structures into rom-related information and screen-relatedMiod Vallat
information. This is preliminary work to help eventually supporting the dual-head ELK model. Also split the initialization code in several routines, this makes the code easier to read, and makes it easier to release resources upon failure. Finally, don't forget to clear the text planes on non-console displays when initializing.
2009-01-25In hpibid(), when computing timeouts from the cpuspeed variable, account forMiod Vallat
68040 systems where cpuspeed is only 3/8 of the intended value.
2009-01-25If hdattach() aborts early because the disk is not in good shape, alwaysMiod Vallat
fail hdopen().
2009-01-25Behave correctly in interrupt handlers if no tty has been allocated yetMiod Vallat
(this was supposed to have been fixed in r1.25, but there was still a missing check).
2009-01-11Actual final round of timeout_add(to, n * hz) -> timeout_add_sec(to, n)Bret Lambert
conversions. ok kettenis@ ok krw@ (possibly for the second time :)
2008-11-25Another bunch of TRY_AGAIN_LATER -> NO_CCB when no I/O could be started.Kenneth R Westerback
"looks sane to me" marco@
2008-10-17Remove clauses 3 and 4 from NetBSD license.Okan Demirmen
from ray; ok ray, deraadt
2008-10-15Second pass of simple timeout_add -> timeout_add_sec conversionsBret Lambert
This should take care of the simpler ones (i.e., timeout values of integer multiples of hz). ok krw@, art@
2008-07-30Do not print adapter target id on the attachment line, now that scsibus(4)Miod Vallat
prints it. These should be the last offenders.
2008-07-18Protect dma operations with splvm instead of splhigh, that's faster thanMiod Vallat
splbio and won't delay clock interrupts.
2008-06-26First pass at removing clauses 3 and 4 from NetBSD licenses.Ray Lai
Not sure what's more surprising: how long it took for NetBSD to catch up to the rest of the BSDs (including UCB), or the amount of code that NetBSD has claimed for itself without attributing to the actual authors. OK deraadt@
generated by cgit v1.2.3 (git 2.25.1) at 2025-01-25 10:13:04 +0000