summaryrefslogtreecommitdiff
path: root/sys/arch/landisk/conf
AgeCommit message (Collapse)Author
2010-06-01use --warn-common for linking (some arch's will show new warnings), andTheo de Raadt
prefer binutils-compatible options in STRIPFLAGS (now that our non-binutils strip(1) can handle them too) ok drahn; miod kettenis (for parts)
2010-05-28${PARAM} is now included in ${CPPFLAGS}, so stop passing it separatelyPhilip Guenthe
to genassym.sh ok deraadt
2010-05-25The _arch and _mach variables now come from config(8), decreasing even furtherTheo de Raadt
the differences between these files. You will need a newer config(8) binary to be able to build kernels. ok kettenis miod
2010-05-25Hand-list the two-step assym.h -> .[Ss] -> .o dependencies. TheTheo de Raadt
result: kernels built without 'make depend'-provided information (ie. the .depend file) are more likely to have their *.[Ss] file compilations track changes to *.h files. The "*.o: assym.h" dependencies listed are gotten from reading the .depend output --- from the biggest kernel possible (ie. GENERIC.MP). When an architecture changes in a substantial way (new .[sS] files), the list should be updated in the prettiest way possible. This is not encouraging people to skip 'make depend'; other issues are not resolved and may be solved later with a change guenther is working on. You can still screwed really easily, so continue running make depend as config tells you. Idea from a discussion with drahn ok drahn, kettenis likes the idea too
2010-05-25${SRCS} is only used once, and fits onto the line where it is usedTheo de Raadt
idea that came out of discussion with drahn
2010-05-24give up on -Wvariable-declTheo de Raadt
delete the archaic links: target which is easily misused handle special .[sS] files in a portable way
2010-05-24Unify the dependency time check for whether an architecture has SFILESTheo de Raadt
2010-05-24Reduce differences between the Makefile.* files for all architectures.Theo de Raadt
ok various people, tested by fewer people, tested by me on 15.
2010-05-23Does not need -Dlandisk, and instead, but -Dlandisk is nice since that isTheo de Raadt
the mach (arch is sh). Also move towards passing $PARAM around in CPPFLAGS, instead of compiling param.c in a special way, as discussed with miod
2010-04-28clean up more more subtle and stupid differences between the variousTheo de Raadt
Makefile.* files
2010-04-27Killing a few more diffs for theo, arm makes #LINKFLAGS, beagle cleanup,Dale Rahn
INCLUDE= common.
2010-04-27Unifity CPPFLAGS= (using ${_mach}), SYSTEM_LD_TAIL= (always on one line),Theo de Raadt
and SRCS= (common files always after the \)
2010-04-27Disable builtin malloc and log2 on gcc3 arches, a no-op for gcc3Jonathan Gray
but required for gcc4. ok kettenis@ deraadt@ marco@, log2 suggested by robert@
2010-04-27a bit more unification to the arm way of doing thisTheo de Raadt
2010-04-27shorten preambleTheo de Raadt
2010-04-27No need for a specific .SUFFIXES list; ok drahnTheo de Raadt
2010-04-27noone needs comments about QUOTA and TRACETheo de Raadt
2010-04-27over the years we have moved to a machine+architectures scheme that hasTheo de Raadt
two directories. in reality, because of how we place files, it has four: .../arch/A, .../arch/A/A, .../arch/M, and .../arch/M/M formalize this A/A and M/M scheme directly in the Makefiles, which makes them a lot more similar drahn likes the idea a lot
2010-04-27use -f assymp.dep again; worked out with miodTheo de Raadt
2010-04-27alpha/conf/Makefile.alphaTheo de Raadt
2010-04-26even cleaner mach/arch/machdir/archdirTheo de Raadt
2010-04-26next step towards unification: make all the genassym chunks handle bothTheo de Raadt
arch and machine dependent files (and add the missing files) ok miod drahn
2010-04-26next unification step: move all MD naming _mach, _machdir, _arch, and _archdirTheo de Raadt
ok miod drahn
2010-04-26first step of unification: spaces at end of lines; comments, etc.Theo de Raadt
ok miod
2010-03-03Enable urndis(4) everywhere that has USB enabled to get it tested.Michael Knudsen
Much prodding from deraadt.
2010-01-25add uthum there too. ok drahn@Matthieu Herrb
2009-10-19Correct a target name so that we don't rebuild vers.o (and thenPhilip Guenthe
bsd) unless some other object has changed. Rebuild and reinstall in /usr/src/usr.sbin/config/ after updating! "I like it" deraadt@
2009-08-09Introduce option DDB_STRUCT. Kernels compiled with this option (except onMiod Vallat
a few arches where toolchain limitations apply) will embed some symbolic information about the various structs used within the kernel, and have new ddb commands allowing struct display and some useful information gathering. Kernel rodata increase varies accross platforms from ~150KB to ~300KB. This option is not enabled by default.
2009-08-09No need to clean genassym{.,o} during `make clean', genassym.sh does thisMiod Vallat
for us.
2009-05-17mux too, like GENERICarmish/conf/RAMDISKTheo de Raadt
2009-05-15Enable udl(4) and ukbd(4) because this lets a landisk actually have aTheo de Raadt
non-serial "console"; it is not really a console since we probe for it so late. But enabling it in ttys(5) works with getty...
2009-05-15pull in the right wscons/rasops partsTheo de Raadt
2009-05-01Add option USER_PCICONF.Miod Vallat
2009-02-10remove run(4) from some RAMDISKDamien Bergamini
2009-02-10enable run(4) everywhere where ural(4) and rum(4) are enabled.Damien Bergamini
run(4) has been reported to work on sparc64 by Maxim Belooussov so I'm pretty confident that it works on all arches.
2009-01-11Fix a sed bug in the makefile's depend target.Paul Irofti
What happened was that the output of mkdep was fed to a sed expression that trimmed a bit more than required and also failed to work when attempting to do make depend with pcc. Example: genassym_c.o: /tmp/genassym.whatever ../../../../../sys/param.h \ was changed to: assym.h: \ but what was intended was: assym.h: ../../../../../sys/param.h \ For the pcc -M output things were a bit different and after the make depend the genassym entry would still remain and make would fail. This affected all platforms except amd64 and sgi. Okay miod@.
2008-12-01terse is good, more readable; please commit deraadt@Todd T. Fries
2008-11-30It's annoying to have an 2+ hour kernel compile die in ld because bluetoothMats O Jansson
requires ukbd, which is not enabled on landisk. I can't understand why someone would like bluetooth keyboard or mouse on landisk without a display. -moj
2008-11-26Enable Bluetooth (btd and btctl are not hooked into the build yet)Uwe Stuehler
2008-11-24Import btsco(4) from NetBSD to work on itUwe Stuehler
2008-06-08alpha/conf/RAMDISKTheo de Raadt
2008-04-12Compile kernels with -Wvariable-decl (except on arches with ipmi, for now).Miod Vallat
2008-04-12typosMiod Vallat
2008-02-24Add commented out Bluetooth HID sectionUwe Stuehler
ok deraadt
2007-11-30Define NORMAL_C_NOP everywhere.Miod Vallat
2007-11-25libkern, begone. Move to a new mechanism where config(8)'s "file"Theo de Raadt
directive can select between MI and MD versions of these files. At the same time, adjust the boot programs to pick exactly what they need, instead of the 7 or 8 mechanisms previously used. There will be some fallout from this, but testing it all by myself is a ridiculously slow process; it will be finished in-tree. Various developers were very nice and avoided making fun of me when I was gibbering in the corner..
2007-11-25Get rid of the kernel 'libcompat' framework, and instead use conf/files toTheo de Raadt
decide which files must be pulled into the kernel. Also conditionalize the pulling of those files based on the COMPAT_* options.
2007-09-09uchcom(4) has been verified to work by djm@, so add it to allJonathan Gray
USB capable archs.
2007-07-30Shuffle the order in which we look for header files, when doingThordur I. Bjornsson
kernel builds locally this doesnt change much but over NFS this cuts about 12% of the build time on my setup (i386). OK miod@, deraadt@.
2007-06-08include files.bluetooth, so that bluetooth support can be compiled,Jasper Lievisse Adriaanse
if enabled. ok gwk@
generated by cgit v1.2.3 (git 2.25.1) at 2025-01-20 05:30:30 +0000