| Age | Commit message (Collapse) | Author |
|---|
|
|
|
|
|
rescinded 22 July 1999. Proofed by myself and Theo.
|
|
be put in the cardbus register which really work instead of crashing the
machine. if_dc @cardbus now works, xl@cardbus will configure, but does
not work properly (endian?) wdc should work fine, but has not been tested
recently.
|
|
|
|
|
|
has been replaced with a serial port adapter on any machine that has
a real serial port internally. This will also power on the internal modem
for keylargo based machines (tested on original PBG4) when the serial port
is open. ok miod@
|
|
and to allow UKC to work properly. ok miod@
|
|
|
|
portions of the tree.
|
|
|
|
|
|
Move the ddb files form macppc/macppc to powerpc/ddb, so that mvmeppc
can benefit from the better ddb that was in macppc.
db_interface.c is left as an md part.
|
|
ok drahn@
|
|
for safety.
|
|
that specifies which printf funciton it should use. Implement
db_stack_trace_cmd in MI code.
Thanks to miod@ for all the tests.
|
|
type characteristics.
internal_types.h will contain only settings invisible from standard C, e.g.,
in the __* or _[A-Z]* namespace, and be reused by files like limits.h.
This allows us to shorten machine/limits.h greatly, as all the common defines
are now in sys/limits.h, plus a small stub in internal_types.h.
Tested on all arches as far as I know.
Approved after discussion with art, millert, deraadt, and others.
|
|
|
|
|
|
the spill list for each PTEG, the V->P translations are stored in
trees for each pmap. All valid kernel mappings are preallocated
in 1-1 memory so that tlb spill/loads for kernel accesses can be
looked up while physical, user mappings are not guaranteed to
be 1-1 mapped, thus the kernel must go virtual to look up user
mappings. While this is more expensive, the tree search is much
lower cost than the long linked list search. Also on each pmap_remove()
it was necessary to search the linked lists for each possible mapping,
now it just looks up the entry in the tree.
This change gives a 25-36% speedup in 'make build' time. What was
around 2:50 is now around 1:55 on a 733MHz G4.
This change causes a likely existing bug to appear quite often,
it deals with the segment register invalidation in kernel mode.
Because of that problem, currently this change limits the physical
memory used to 256MB. This limitation will be fixed soon, it is not
an error in the pmap code.
* Effort sponsored in part by the Defense Advanced Research Projects
* Agency (DARPA) and Air Force Research Laboratory, Air Force
* Materiel Command, USAF, under agreement number F30602-01-2-0537.
|
|
BUS_DMA_READ, BUS_DMA_WRITE, and BUS_DMA_STREAMING
|
|
under the control of machdep.allowaperture.
This allows to run the X server on macppc with securelevel=1, given that
machdep.allowaperture is != 0.
OK deraadt@
|
|
The patch allows you to change the value of NMBCLUSTERS, BUFCACHEPERCENT
and NKMEMPAGES using the config command, instead of recompiling the kernel.
This is the kernel part of the patch. I have compiled it on i386, sparc64,
alpha and macppc. -moj ok art@ maja@
|
|
be claimed by the pre kvm init stealing process and kvm.
|
|
to make sure the whole region is flushed. from conversation with pefo.
|
|
|
|
|
|
on large memory machines.
|
|
|
|
date: 2000/02/11 19:22:52; author: thorpej;
Add some very simple code to auto-size the kmem_map. We take the
amount of physical memory, divide it by 4, and then allow machine
dependent code to place upper and lower bounds on the size. Export
the computed value to userspace via the new "vm.nkmempages" sysctl.
NKMEMCLUSTERS is now deprecated and will generate an error if you
attempt to use it. The new option, should you choose to use it,
is called NKMEMPAGES, and two new options NKMEMPAGES_MIN and
NKMEMPAGES_MAX allow the user to configure the bounds in the kernel
config file.
|
|
|
|
instead of doing fork1, cpu_set_kpc. This lets us retire cpu_set_kpc and
avoid a multiprocessor race.
This commit breaks vax because it doesn't look like any other arch, someone
working on vax might want to look at this and try to adapt the code to be
more like the rest of the world.
Idea and uvm parts from NetBSD.
|
|
|
|
memory machines and current program demands.
|
|
Most work by Wilbern Cobb <vedge@csoft.org> with some fixes from me, mickey@
and drahn@.
|
|
|
|
|
|
and power event are not handled, however it is enough support
to poll the battery/AC/charging states of the system.
Code by Alexander Guy.
|
|
Problem: no MI soft interrupts.
Bad solution: use old hack that was never fully implemented
to hook in zs soft interrupts.
This allows zs to work almost reasonably.
Still has issues with getty (carrier detect)
and modems on newer machines (power control).
Post 3.0 this must be cleaned up with real soft interrupts.
|
|
|
|
|
|
|
|
|
|
paddr_t should be protected with _LOCORE
|
|
eventually; drahn@ ok
|
|
kvm min and max addresses.
|
|
is being renamed to macppc. This is to allow sharing of common code
between different powerpc base platforms.
Most of the work involved in the renaming process was performed by miod@
Files moved from powerpc/include to macppc/include
Some files were not "moved" but wrapper files were created which include
the powerpc/include version.
Several of the powerpc/include files where changed to reflect that they
are POWERPC_* not MACHINE_*.
|
