| Age | Commit message (Collapse) | Author |
|---|
|
|
|
them along when we attach pci(4). Simplify the rbus code by using extents
too.
|
|
|
|
Saves every damned driver calling bzero(), and continues the M_ZERO,
PR_ZERO symmetry.
|
|
in sysctl hw.ncpufound; ok miod kettenis
|
|
For the possibility of sleeping, the first two flags are UVM_PLA_WAITOK
and UVM_PLA_NOWAIT. It is an error not to show intention, so assert that
one of the two is provided. Switch over every caller in the tree to
using the appropriate flag.
ok art@, ariane@
|
|
|
|
between instances, saving space in the kernel. feedback from many (some
incorporated, some left for future work).
ok deraadt, kettenis, "why not" miod.
|
|
can be found in iBook G4 12".
Remove references for LCD panel sizes because the same device can be found
on different sized laptops and it has nothing to do with the trackpad.
Introduce a type variable that stores the device type: FOUNTAIN, GEYSER1 or
GEYSER2. This value helps deciding some of the device parameters and it gets
printed in the dmesg instead of the panel size.
Introduce "mouse button emulation" on multi-touch trackpads just like in
macos, so it's not needed to bind mouse buttons to the keyboard anymore:
Tap two fingers + mouse button = 3rd mouse button = right click
Tap three fingers + mouse button = 2nd mouse button = middle click
Discussed with and ok: miod@ and maja@
|
|
try to be smart for the address range, uvm_pglistalloc() is smart enough
nowadays.
|
|
Seen on a Tech Source Raptor.
ok miod@
|
|
APM_IOC_{SUSPEND,STANDBY}_REQ: This is to fix an issue with apm suspend
where a call to zzz suspended the machine immediately, not giving anyone
listening for apm events (other than apmd) a chance to deal with the
upcoming change. This hit X hard since the introduction of drm, since it
needs to have time to idle the 3d engine and otherwise get the device
into a recoverable state. Such things are needed until we support
modesetting in the kernel.
Now, instead of forcing a suspend, using ioctl sends out an event similar
to if you had put the lid down, giving all userland applications a
chance to reply.
tested by sthen@ and beck@, especial thanks to sthen for sitting there
while I tried to debug this remotely, I owe him beer.
Prompted by and ok deraadt@
|
|
as additional argument. This will allow intermediate layers between
scsi devices such as sd and scsi host adapters to take appropriate
action if necessary.
|
|
|
|
run(4) has been reported to work on sparc64 by Maxim Belooussov so I'm
pretty confident that it works on all arches.
|
|
|
|
|
|
powerdown if we try to issue pmu commands. Skip these if no adb device
appears in the device tree.
Adapted from NetBSD.
|
|
|
|
of panicing.
ok drahn@
|
|
go ahead miod@
|
|
What happened was that the output of mkdep was fed to a sed expression
that trimmed a bit more than required and also failed to work when
attempting to do make depend with pcc.
Example:
genassym_c.o: /tmp/genassym.whatever ../../../../../sys/param.h \
was changed to:
assym.h: \
but what was intended was:
assym.h: ../../../../../sys/param.h \
For the pcc -M output things were a bit different and after the make
depend the genassym entry would still remain and make would fail. This
affected all platforms except amd64 and sgi.
Okay miod@.
|
|
conversions.
ok kettenis@
ok krw@ (possibly for the second time :)
|
|
on apple laptops.
The eject button will only eject the disc when it's not used by
anything.
ok miod@
|
|
(if the stge(4) entry is commented, so is the ipgphy(4) entry then).
this allows ipgphy0 to attach to my stge0, which has a IC+ 1000A chip
discussed with and ok jsg@, ok dlg@
|
|
|
|
|
|
from the individual drivers now that ether_ioctl() handles this.
Shrinks the i386 kernels by..
RAMDISK - 2176 bytes
RAMDISKB - 1504 bytes
RAMDISKC - 736 bytes
Tested by naddy@/okan@/sthen@/brad@/todd@/jmc@ and lots of users.
Build tested on almost all archs by todd@/brad@
ok naddy@
|
|
|
|
"looks sane to me" marco@
|
|
|
|
ok drahn@
|
|
there
|
|
ok miod@
|
|
at apple code
go ahead drahn@
|
|
o set init data to match snapper_set_foo*
o set volume to 190 (audible compared to the default)
o set input to mic (most common usage)
ok jakemsr@
|
|
control. makes mixerctl(1) output more sensible.
ok drahn, todd
|
|
set ap_open_count = 0 in mmclose() instread of decrementing it.
ok miod@, oga@.
|
|
* for outputs.{bass,treble}, 0 dB corresponds to mixer value 128,
not 0.
* line-in is configured as the default recording source; set
sc->sc_record_source accordingly.
* add missing register to initialization code.
from Marco (marco2z at arsystel com), thanks
testing/ok drahn@
|
|
causes high priority interrupts to be delayed until that state is cleared.
|
|
|
|
tested by me, from ratchov@, please commit ratchov@
|
|
|
|
mulaw mono, which few can even do.
"Please just get this in." brad@
|
|
|
|
which are uniform for the profclock on each cpu in a SMP system (but using
a different seed for each cpu). on all cpus, avoid seeding with a value out
of the [0, 2^31-1] range (since that is not stable)
ok kettenis drahn
|
|
This should take care of the simpler ones (i.e., timeout values of
integer multiples of hz).
ok krw@, art@
|
|
|
|
Move calling ether_ioctl() from the top of the ioctl function, which
at the moment does absolutely nothing, to the default switch case.
Thus allowing drivers to define their own ioctl handlers and then
falling back on ether_ioctl(). The only functional change this results
in at the moment is having all Ethernet drivers returning the proper
errno of ENOTTY instead of EINVAL/ENXIO when encountering unknown
ioctl's.
Shrinks the i386 kernels by..
RAMDISK - 1024 bytes
RAMDISKB - 1120 bytes
RAMDISKC - 832 bytes
Tested by martin@/jsing@/todd@/brad@
Build tested on almost all archs by todd@/brad@
ok jsing@
|
|
entries in between filled banks.
ok drahn@
|
