| Age | Commit message (Expand) | Author |
|---|
| 2009-11-18 | Add glue to attach iockbc(4) to iof(4) as well. Tested by deraadt@ | Miod Vallat |
| 2009-11-11 | Let ioc(4) pass the information whether it is an onboard device or not, to its | Miod Vallat |
| 2009-11-11 | Perform a bit more kbc initialization, instead of relying upon the prom to | Miod Vallat |
| 2009-11-11 | It turns out PCI IOC3 card which embed both the Ethernet controller and the | Miod Vallat |
| 2009-11-10 | Add iockbc(4), a driver for the PS/2 keyboard and mouse interface found on | Joel Sing |
| 2009-11-09 | Only invoke the L1 code if IP35. | Miod Vallat |
| 2009-11-08 | Add code to send L1 commands and parse command results; use it to add a way | Miod Vallat |
| 2009-11-08 | Figure out the size of the SSRAM used as internal memory by the chip on | Miod Vallat |
| 2009-11-08 | Do not risk touching nonexisting registers on MENET boards; untested due to | Miod Vallat |
| 2009-11-07 | In case an ioc(4) device has lost its NIC component, do not recognize it | Miod Vallat |
| 2009-11-07 | Change sgi system identification from a single system type list, to a smaller | Miod Vallat |
| 2009-11-03 | A few cleanups and also reflect duplex state in mcr in addition to tcsr. | Miod Vallat |
| 2009-11-02 | When the iec(4) Ethernet address is unkown, pass ff:ff:ff:ff:ff:ff instead of | Miod Vallat |
| 2009-11-01 | Driver for the sgi IOC3 onboard Ethernet interface. Tested on Octane only so | Miod Vallat |
| 2009-10-26 | Add support for the Octane power button to power(4). Took me a while to | Miod Vallat |
| 2009-10-26 | Better crime/mace interrupt handling; interrupt information is no longer | Miod Vallat |
| 2009-10-22 | Implement bus_space_vaddr() for macepcibr. | Miod Vallat |
| 2009-10-22 | Make macebus_intr_disestablish() signature sane, and update its caller. | Miod Vallat |
| 2009-10-14 | On IP30 and IP35 systems, try harder to figure out exactly what model we are | Miod Vallat |
| 2009-10-13 | Make iof(4) pass its bus speed to children, this in turn allows com(4) to | Miod Vallat |
| 2009-10-07 | Attach DS1742 style dsrtc to iof (IOC4) too. | Miod Vallat |
| 2009-10-07 | Missing semicolon in dmesg | Miod Vallat |
| 2009-08-22 | Constify the what/name parameter of pci_intr_establish(). | Michael Knudsen |
| 2009-08-18 | Blind partial support for IOC4 chip, found on IO8 and IO9 base I/O boards on | Miod Vallat |
| 2009-08-18 | Replace a few hardcoded numbers from the interrupt register with proper | Miod Vallat |
| 2009-08-18 | On dual interrupt IOC3 designs, disestablish the ethernet interrupt if no | Miod Vallat |
| 2009-08-09 | typo; brad | Miod Vallat |
| 2009-08-09 | Clear the upper part of 64 bit memory BARs, for they show up as 0xffffffff | Miod Vallat |
| 2009-07-26 | Rework ioc children attachment: instead of having ioc build a semi-bogus | Miod Vallat |
| 2009-07-26 | Don't forget to bus_space_unmap(), even if it's a no-op, in rbus_space_unmap(). | Miod Vallat |
| 2009-07-23 | When computing the total resources required by devices behind a ppb, take | Miod Vallat |
| 2009-07-22 | Get rid of now unused extent_malloc_ok variable. | Miod Vallat |
| 2009-07-22 | Get rid of bus_space_tag_t now unused bus_extent and bus_reverse fields. | Miod Vallat |
| 2009-07-22 | Overhaul resource handling and mapping in macepcibr(4): | Miod Vallat |
| 2009-07-21 | PCI-Cardbus bridge support for both O2 (macepcibr) and Octane/Origin (xbridge) | Miod Vallat |
| 2009-07-19 | Simplify code that sanitizes pci resources on the O2's mace PCI bridge. | Mark Kettenis |
| 2009-07-17 | Update bus_dma to the better codebase found on almost all other platforms, | Miod Vallat |
| 2009-07-16 | Program PPB_REG_PREFLIM_HI32, not PPB_REG_PREFBASE_HI32 a second time. Oops. | Miod Vallat |
| 2009-07-16 | Make the PCI-PCI bridge initialization code bus-independent, relying on a | Miod Vallat |
| 2009-07-16 | Cheat in pci_conf_read() and force the REXTVALID bit in the O2 onboard ahc(4) | Miod Vallat |
| 2009-07-13 | Extend xbridge to support shared interrupt handlers, and perform PCI-PCI | Miod Vallat |
| 2009-07-01 | The widget mapping code has been written back when I was only working on | Miod Vallat |
| 2009-06-21 | Remove the ioc interrupt probe code, the heuristic is correct; origin 300 | Miod Vallat |
| 2009-05-27 | Yet another attempt at a more reliable detection of the second interrupt | Miod Vallat |
| 2009-05-22 | According to pics on ebay, CADDuo boards indeed have Ethernet connectors. | Miod Vallat |
| 2009-05-08 | Attach children with config_found_sm() instead of directly invoking | Miod Vallat |
| 2009-05-03 | Pass 0 as base offset, not -1, for child devices which ignore the value. | Miod Vallat |
| 2009-05-02 | Let ioc(4) decide which child devices to attach depending on its identification | Miod Vallat |
| 2009-04-25 | More IOC3 flavour partnumbers. And apparently there are some flavours which | Miod Vallat |
| 2009-04-25 | Extend PCI mmio address space by using a bigger window that requires 64-bit | Mark Kettenis |
