src - OpenBSD base system

Age	Commit message (Collapse)	Author
2010-06-01	use --warn-common for linking (some arch's will show new warnings), and	Theo de Raadt
	prefer binutils-compatible options in STRIPFLAGS (now that our non-binutils strip(1) can handle them too) ok drahn; miod kettenis (for parts)
2010-05-28	${PARAM} is now included in ${CPPFLAGS}, so stop passing it separately	Philip Guenthe
	to genassym.sh ok deraadt
2010-05-25	The _arch and _mach variables now come from config(8), decreasing even further	Theo de Raadt
	the differences between these files. You will need a newer config(8) binary to be able to build kernels. ok kettenis miod
2010-05-25	Hand-list the two-step assym.h -> .[Ss] -> .o dependencies. The	Theo de Raadt
	result: kernels built without 'make depend'-provided information (ie. the .depend file) are more likely to have their .[Ss] file compilations track changes to .h files. The "*.o: assym.h" dependencies listed are gotten from reading the .depend output --- from the biggest kernel possible (ie. GENERIC.MP). When an architecture changes in a substantial way (new .[sS] files), the list should be updated in the prettiest way possible. This is not encouraging people to skip 'make depend'; other issues are not resolved and may be solved later with a change guenther is working on. You can still screwed really easily, so continue running make depend as config tells you. Idea from a discussion with drahn ok drahn, kettenis likes the idea too
2010-05-25	${SRCS} is only used once, and fits onto the line where it is used	Theo de Raadt
	idea that came out of discussion with drahn
2010-05-24	give up on -Wvariable-decl	Theo de Raadt
	delete the archaic links: target which is easily misused handle special .[sS] files in a portable way
2010-05-24	Reduce differences between the Makefile.* files for all architectures.	Theo de Raadt
	ok various people, tested by fewer people, tested by me on 15.
2010-05-23	Move towards passing $PARAM around in CPPFLAGS, instead of compiling param.c	Theo de Raadt
	in a special way, as discussed with miod
2010-04-28	clean up more more subtle and stupid differences between the various	Theo de Raadt
	Makefile.* files
2010-04-27	Unifity CPPFLAGS= (using ${_mach}), SYSTEM_LD_TAIL= (always on one line),	Theo de Raadt
	and SRCS= (common files always after the \)
2010-04-27	Disable builtin malloc and log2 on gcc3 arches, a no-op for gcc3	Jonathan Gray
	but required for gcc4. ok kettenis@ deraadt@ marco@, log2 suggested by robert@
2010-04-27	shorten preamble	Theo de Raadt

2010-04-27	noone needs comments about QUOTA and TRACE	Theo de Raadt

2010-04-27	over the years we have moved to a machine+architectures scheme that has	Theo de Raadt
	two directories. in reality, because of how we place files, it has four: .../arch/A, .../arch/A/A, .../arch/M, and .../arch/M/M formalize this A/A and M/M scheme directly in the Makefiles, which makes them a lot more similar drahn likes the idea a lot
2010-04-27	use -f assymp.dep again; worked out with miod	Theo de Raadt

2010-04-26	even cleaner mach/arch/machdir/archdir	Theo de Raadt

2010-04-26	next step towards unification: make all the genassym chunks handle both	Theo de Raadt
	arch and machine dependent files (and add the missing files) ok miod drahn
2010-04-26	next unification step: move all MD naming _mach, _machdir, _arch, and _archdir	Theo de Raadt
	ok miod drahn
2010-04-26	first step of unification: spaces at end of lines; comments, etc.	Theo de Raadt
	ok miod
2010-04-19	Add missing bits for complete softraid support to sparc/sparc64	David Coppa
	ramdisks. OK marco@
2010-04-03	add bnx; from brad	Theo de Raadt

2010-03-03	Enable urndis(4) everywhere that has USB enabled to get it tested.	Michael Knudsen
	Much prodding from deraadt.
2009-12-31	Add vds(4) and vdsp(4), implementing the vDisk server side protocol. This	Mark Kettenis
	makes it possible to run an OpenBSD guest domain on top of a virtiual disk backed by a disk image on a filesystem on OpenBSD control or service domain. Probably doesn't support running Solaris or Linux yet. Haven't tried those yet because booting their installers in a guest domain is way too painful!
2009-12-21	Add uthum(4) to arches I could test it. ok deraadt@.	Matthieu Herrb

2009-12-15	Add vsw(4).	Mark Kettenis

2009-11-23	Add bnx(4) now that it works.	Claudio Jeker

2009-11-15	athn works on sparc64	Theo de Raadt

2009-10-19	Correct a target name so that we don't rebuild vers.o (and then	Philip Guenthe
	bsd) unless some other object has changed. Rebuild and reinstall in /usr/src/usr.sbin/config/ after updating! "I like it" deraadt@
2009-10-04	pull in wbsd conditionally; ok kettenis	Theo de Raadt

2009-10-03	Glue to attach the SD/MCC reader of the W83L519D found on some Tadpole	Mark Kettenis
	laptops.
2009-09-19	Initial stab at a driver for LOMlite2 as found on the Sun Fire V100, Sun Fire	Mark Kettenis
	V120 and Sun Netra X1. For now this only provides a temperature sensor, but more stuff will follow.
2009-09-01	Enable SBus ti(4) here as well.	Mark Kettenis

2009-09-01	Enable SBus ti(4) here as well.	Mark Kettenis

2009-08-28	OpenBSD/sparc64 can now be compiled without -traditional-cpp.	Joel Sing
	From jsg@
2009-08-09	Introduce option DDB_STRUCT. Kernels compiled with this option (except on	Miod Vallat
	a few arches where toolchain limitations apply) will embed some symbolic information about the various structs used within the kernel, and have new ddb commands allowing struct display and some useful information gathering. Kernel rodata increase varies accross platforms from ~150KB to ~300KB. This option is not enabled by default.
2009-08-09	No need to clean genassym{.,o} during `make clean', genassym.sh does this	Miod Vallat
	for us.
2009-07-12	Enable gem@sbus.	Mark Kettenis

2009-07-05	radeonfb(4), an accelerated framebuffer for Sun XVR-100 boards (which have an	Mark Kettenis
	ATI Radeon 7000 chip on them). While there, make gfxp(4) depend on rasops32 just in case somebody removes other framebuffers that pull this in from their kernel config. ok deraadt@, miod@
2009-06-24	enable softraid	Todd T. Fries
	test built and booted by me ok marco@, deraadt@
2009-06-24	for the isp(4) driver, invert the meaning of the options which pull	Theo de Raadt
	firmwares into the smaller (and larger) media ok krw
2009-06-04	Enable gfxp(4).	Mark Kettenis

2009-06-03	Initial stab at a driver for the Tech Source Raptor GFX built around the	Mark Kettenis
	3D Labs Permedia 2v chip. These cards were sold by Sun as PGX32.
2009-06-02	Enable machfb(4) and raptor(4) here too.	Mark Kettenis

2009-06-02	Enable machfb(4).	Mark Kettenis

2009-06-02	Initial stab at an accelerated driver for PGX/PGX64 framebuffers.	Mark Kettenis
	Inspiration from the NetBSD, Linux and X.org drivers.
2009-06-01	Enable zyd in more places now we know it is endian safe.	Jonathan Gray

2009-05-20	Add code to attach sun mice on sparc and sparc64 as wsmouse devices. Since	Miod Vallat
	not all Sun mice run at the canonical 1200 bps, hop between 1200, 4800 and 9600 bps by paying attention to breaks on the line. Attachement and engine code written 7 years ago for OpenBSD/sparc, except for sparc64 com(4) attachment. Speed hop idea borrowed from Opensolaris. This allows sparc and sparc64 users to run X11 without needing a configuration file anymore, as it was in the XFree86 3.x days. Multihead configurations will still need a minimal configuration file, though.
2009-05-16	Add vsw(4), a driver for the virtual network switch on sun4v. This is just	Mark Kettenis
	some simple glue to attach each port as a network interface.
2009-05-10	Enable vcc(4) and vcctty(4).	Mark Kettenis

2009-05-10	Add vcc(4) and vcctty(4). The vcc(4) driver is a driver for the "Virtual	Mark Kettenis
	Console Concentrator" found on the control domain of sun4v systems. It manages the connections to the consoles of guest domains which are exposed as terminal-like devices through vcctty(4).