summaryrefslogtreecommitdiff
path: root/sys/arch/sparc64/dev
AgeCommit message (Expand)Author
2009-12-14Add wrapper functions to enable/disable interrupts and manipulate their state.Mark Kettenis
2009-12-12Add missing splbio() protection when sending commands to the vDisk server.Mark Kettenis
2009-12-12Remove debug printf and properly dequeue command instead when a read times outMark Kettenis
2009-12-09Resubmit any pending SCSI commands when we sucessfully (re)connect toMark Kettenis
2009-12-09Don't try to shove I/O down the LDC if we're disconnected from the virtualMark Kettenis
2009-12-08Base the revision string in the INQUIRY info on the version of the VIO protocolMark Kettenis
2009-12-02no firmware on ramdisks; ok kettenisTheo de Raadt
2009-12-01Fix the mixer interface for the CE4231 sound card found in Sun machines. Still aEdd Barrett
2009-11-30Load firmware that is needed for accelerated X on Elite3D boards.Mark Kettenis
2009-11-10Handle LOMlite2 in an interrupt-driven way; avoids using delay(9) once theMark Kettenis
2009-11-09Fix error message.Mark Kettenis
2009-11-09Every selwakeup() should have a matching KNOTE() (even if kqueue isn'tNicholas Marriott
2009-10-31Establish a shutdown hook to disable the watchdog timer to prevent watchdogMark Kettenis
2009-10-31Make sure we don't insert and entry into the list of pending commends twice.Mark Kettenis
2009-10-31Use suser when possible. Suggested by miod@.Federico G. Schwindt
2009-10-31Add missing KNOTE() calls after selwakeup(), until we decide if the KNOTE()Theo de Raadt
2009-10-28LOMlite seems to get wedged from time to time; add some code to unwedge it.Mark Kettenis
2009-10-03Glue to attach the SD/MCC reader of the W83L519D found on some TadpoleMark Kettenis
2009-09-27Print the LOM type (LOMlite/LOMlite2).Mark Kettenis
2009-09-27Add sensor status for fan sensors.Mark Kettenis
2009-09-27Implement queuing of reads and writes. This gets rid of the remaining busyMark Kettenis
2009-09-24Slightly less evil busy wait loop for LOMlite. Small tweak to LOMlite stateMark Kettenis
2009-09-23Implement reading LOMlite registers using timeouts and a state machine toMark Kettenis
2009-09-23Add some more LOMlite bits. We don't attach to LOMlite yet because it isMark Kettenis
2009-09-23Attempt mapping as io as well as mmio; necessary to make this work on a V100.Mark Kettenis
2009-09-23Restructure watchdog support such that it will work on both LOMlite andMark Kettenis
2009-09-22Add PSU sensor.Mark Kettenis
2009-09-21Explicitly configure the watchdog timer not to reset the machine when weMark Kettenis
2009-09-21Add support for the built-in watchdog. In the default state the watchdog willMark Kettenis
2009-09-20Update the hostname stored in the LOM based on the hostname set in the kernel.Mark Kettenis
2009-09-20Add fan sensors.Mark Kettenis
2009-09-20Use name provided by the LOM device as description for the temperatureMark Kettenis
2009-09-19Initial stab at a driver for LOMlite2 as found on the Sun Fire V100, Sun FireMark Kettenis
2009-09-12Add DIOCSDINFO support to the three fd drivers. No change to existingKenneth R Westerback
2009-09-10Remove zssoftpending; it isn't of any use anymore.Mark Kettenis
2009-09-05Change the wsdisplay_emulops return types from void to int; emulops will nowMiod Vallat
2009-08-22Constify the what/name parameter of pci_intr_establish().Michael Knudsen
2009-08-13Replace the error strings that were being passed around with much simplerTheo de Raadt
2009-08-09if extent_alloc() fails, we don't clear the iomap properly beforeOwain Ainsworth
2009-08-09MCLGETI() will now allocate a mbuf header if it is not provided, thusTheo de Raadt
2009-07-24timeout_add -> timeout_add_msecBret Lambert
2009-07-20Pass a pci_chipset_tag_t to pci_intr_line(), to eventually allow theMiod Vallat
2009-07-16Clean up after X.Mark Kettenis
2009-07-05radeonfb(4), an accelerated framebuffer for Sun XVR-100 boards (which have anMark Kettenis
2009-06-28Add colormap support for 8bpp mode.Mark Kettenis
2009-06-28Make this work in 8bpp mode too. Color support is still missing; probablyMark Kettenis
2009-06-27Stricter checks when deciding which acceleration code to use. Instead ofMiod Vallat
2009-06-17remove extra debugging printf(). ok miod@Matthieu Herrb
2009-06-05Save some more state such that we recover from X changing depth on us.Mark Kettenis
2009-06-05Clear screen to clean up after X.Mark Kettenis
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-23 00:30:41 +0000