summaryrefslogtreecommitdiff
path: root/sys/arch/sparc64/dev
AgeCommit message (Expand)Author
2008-03-13First shot at a driver to get the time-of-day on the e10k.Mark Kettenis
2008-03-09Add some members needed by the sunv IOMMU code.Mark Kettenis
2008-03-09Driver for the virtual PCI host bridge on sun4v.Mark Kettenis
2008-03-09sun4v hypervisor IOMMU code.Mark Kettenis
2008-03-09Virtual bus for virtual devices on sun4v.Mark Kettenis
2008-03-09Check "status" property.Mark Kettenis
2008-03-08Driver for console on sun4v.Mark Kettenis
2008-03-08Driver for virtual real-time clock on sun4v.Mark Kettenis
2008-03-08Virtual bus for virtual devices on sun4v.Mark Kettenis
2008-03-08Check "status" property.Mark Kettenis
2008-03-08Check "status" property. Since the PROM marks the floppy controller deviceMark Kettenis
2008-03-01Use getpropspeed() to get console speed. Add code to handle "ssp-console" andMark Kettenis
2008-03-01Make sabtty(4) adopt the speed configured in OpenFirmware when it is theMark Kettenis
2008-02-27return from tda_attach before registering the sensor taskRobert Nagy
2008-02-20make tda(4) run the fans at maximum speed when we are about to dropRobert Nagy
2008-02-18Only attach on Sun Blade 1000/2000.Mark Kettenis
2008-02-17We're not printing interrupt priority levels (ot whatever ipl stands for) butMark Kettenis
2008-02-12tda(4) is a driver for Philips TDA8444 which can be found inRobert Nagy
2008-02-10Attach to "lom-console". Hopefuly this will give us a proper console onMark Kettenis
2008-02-10Add interrupt state diagnostic registers.Mark Kettenis
2008-02-03Map windows little-endian like the MI pcmcia code expects.Mark Kettenis
2008-01-24Finish the beep(4) driver by hooking it up to the ukbd(4) beep handlerRobert Nagy
2008-01-23Cleanup cn_pri. Change constants to more meaningful names, rather thanJoel Sing
2008-01-20Add temperature sensor.Mark Kettenis
2008-01-19Make host bridges provide their own implementation of pci_conf_read() andMark Kettenis
2008-01-18Print consoleness the canonical way.Mark Kettenis
2008-01-18First attempt to write a driver for the environment device found onMark Kettenis
2008-01-17Print names we get from the prom within double quotes.Mark Kettenis
2008-01-15Make sabtty(4) adopt the speed configured in OpenFirmware when it is theMark Kettenis
2008-01-08Be uniform with console message from other devicesTheo de Raadt
2008-01-08the rsc-console on the v880 operates at 115200, not the 9600 we think weDavid Gwynne
2008-01-03Remove redundant extenr declaration.Mark Kettenis
2008-01-03Don't depend on evil (struct psycho_pbm *) cast.Mark Kettenis
2008-01-03Remove some junk.Mark Kettenis
2007-12-15move some iommu_dvmamap_validate_map()'s into DEBUG instead of DIAGNOSTIC, toTheo de Raadt
2007-12-07unify a function name compared to other bussesTheo de Raadt
2007-12-05use mutexes to protect the iommu's extent map and the streaming buffer,Theo de Raadt
2007-11-25Give the CarBus side of CardBus-PCI bridges a bus number, since OpenFirmwareMark Kettenis
2007-11-15Attach to "rsc-console". Hopefuly this will give us a proper console onMark Kettenis
2007-11-14Remove eeprom.h.Mark Kettenis
2007-11-13Fix printf format string.Mark Kettenis
2007-11-13Remove bsd_openprom.h.Mark Kettenis
2007-11-10weel -> wellJoel Sing
2007-10-28Match on compatible: 'pcf8584', such that we attach on the V210 again.Mark Kettenis
2007-10-25Don't forget the channel number; makes sure we don't always read channel 0Mark Kettenis
2007-10-25Remove some coded that has been #ifdef'ed out for quite a while now.Mark Kettenis
2007-10-24Enable power supply temperature sensors on the E450.Mark Kettenis
2007-10-24Add support for power supply temperature sensors on the E450.Mark Kettenis
2007-10-22let alipm0 still be used for spdmem probes, but skip sensors. alipm (orTheo de Raadt
2007-10-22Add support for SUNW,envctrl as found on the E450.Mark Kettenis
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-24 17:31:52 +0000