summaryrefslogtreecommitdiff
path: root/sys/arch
AgeCommit message (Collapse)Author
2005-03-08Oops. Put scoop GPIO pins into correct state on suspend, and remove anUwe Stuehler
unnecessary function while there. ok drahn@
2005-03-08Enable or disable CF sockets at appropriate times, but be sure toUwe Stuehler
enable socket 0 power via GPIO. Socket 1 can be ignored for now. Initial diff, testing, and ok drahn@.
2005-03-08Kill hp300 DISKLESS kernel, not worth using against GENERIC for disklessMiod Vallat
systems since it still has all the filesystems for vnd usage and thus does not save much memory... ok deraadt@
2005-03-08Cosmetics...Thierry Deval
Mainly remove space between locators parens, replace spaces with tabs where appropriate and consistently align dependencies.
2005-03-07- Match PGI,tvthree (similar frame buffer capacities)Miod Vallat
- Correctly handle invalid freqcode position 6.
2005-03-07Do not bother passing the blanking routine to fbwscons_console_init(),Miod Vallat
as fbwscons_attach() can find it on its own.
2005-03-07Always force a null context in kvm_setcache(); no functional change for sun4m.Miod Vallat
2005-03-07Add missing pentium m processors from the "Intel Pentium M ProcessorMarc Balmer
on 90 nm Process with 2-MB L2 Cache Datasheet" ok deraadt@
2005-03-07include apm.h only if CONF_HAVE_APM is definedUwe Stuehler
2005-03-07Shorten dmesg on ss4.Miod Vallat
2005-03-07move to 3.7-betaTheo de Raadt
2005-03-06Shorten dmesg if no keyboard is plugged.Miod Vallat
2005-03-05Clean up the tree from incomplete, unreliable and unsupported IEEE1394 code.Thierry Deval
Ok deraadt@, miod@
2005-03-05Now that xbox sort-of works on sparc64, port the cgtwelve driver, sinceMiod Vallat
the only way to connect it to a sparc64 machine is via an xbox device.
2005-03-05Preliminary xbox support: attaches, memory mapping and interrupts work, butMiod Vallat
DMA transfers are not implemented yet, and are disabled (which causes drivers to SBus cards on the xbox to fail to attach). In practice, this allows frame buffers to work, maybe more devices; DMA support will be worked on in the near future.
2005-03-04for consistency, use preempt(NULL)Martin Reindl
ok uwe@
2005-03-04match a bunch more Nubus cards from NetBSD;Martin Reindl
makes my DaynaPORT E/II-3 work
2005-03-03Support APM_IOC_PRN_CTL, and machdep.apmwarn as documented in apm(4), andUwe Stuehler
apmd(8); missing sysctl variable noticed by drahn@
2005-03-03Unbreak sun4/4c; my bad, spotted by nick@Miod Vallat
2005-03-03Sync a few comments with reality.Miod Vallat
2005-03-03Sort frame buffer section and remove rasops32 dependencies from cgfourteen,Miod Vallat
cgtwelve and tcx, as they are no longer necessary.
2005-03-03Do not attempt to read past firmware data in rfx_initialize().Miod Vallat
2005-03-02fix obviously wrong macro (unnoticed since it is currently unused)David Gwynne
ok drahn@
2005-03-02Support for SUNW,fas SCSI, currently restricted to the lower 8 targets dueMiod Vallat
to MI esp code limitations. ok deraadt@
2005-03-01Print display resolution as %dx%d, not %d x %d.Miod Vallat
2005-03-01only call eaio_l2() if kernel has support for pcxl2 compiled in; from ↵Michael Shalayeff
weissmanndude
2005-02-28Store interrupt state in one variable not two, remove inlines whichDale Rahn
signficantly bloat kernel. tested/ok dlg@
2005-02-28Provide inittodr and resettodr for xscale, remove them from sa11x0, andUwe Stuehler
restore the time on resume.
2005-02-27Move wsdisplay-only prototypes declarations in the #if NWSDISPLAY > 0 blockMiod Vallat
so that kernels with no frame buffer drivers can compile; spotted by marc@
2005-02-27Document how to set CONSCODE to point to an SGC device if one wants to forceMiod Vallat
the console.
2005-02-27Split sti softc in two structures, one device-related for regular deviceMiod Vallat
attachment and interface, one screen-attached for the real work. The attachment code is now required to decide whether sti_end_attach() is run immediately, or as a startuphook. This allows hp300 to initialize sti early, and use it as a console; hppa is functionally unchanged, as it uses the PROM console until the root device is mounted.
2005-02-27Invoke hp300_cninit() twice, with a global variable letting theMiod Vallat
console-dependent routines know which pass they are being invoked in. The first pass is the usual console detection code. The second pass runs after uvm is initialized, and will allow devices which need VM services to run to claim the console.
2005-02-27Decide whether to force serial console on the 425e based upon the serviceMiod Vallat
switch, which is a physical switch on this model, unlike other frodo-based hp300. Service mode will now select serial console, while normal mode will select graphics console.
2005-02-27Use the DMA defines from dev/ic/lsi64854reg.h whenever possible; no functionalMiod Vallat
change. ok deraadt@
2005-02-25Enable re(4) on alpha.Jonathan Gray
2005-02-24Don't use inline assembly for cpuid instruction, it clobbersAlexander Yurchenko
registers that are used by gcc. Use cpuid() function instead like all others do. Problem noticed by david@. ok tom@
2005-02-24Workaround for a suspend problem when building on the zaurus.Dale Rahn
2005-02-24do not even ask for btlb on 8k cpus as pdc pretends there is some but then ↵Michael Shalayeff
it does not work; found w/ Moritz Kiese <mbk@mytum.de> on c180; add a debug print and fix pcxu entry
2005-02-24add wax@uturn; found on c180Michael Shalayeff
2005-02-23shrinkDavid Gwynne
ok drahn@
2005-02-23do not permit a suspend if the lid is closed; uwe okTheo de Raadt
2005-02-23Make no distinction between standby and suspend requests for now.Uwe Stuehler
2005-02-23A healthy dose of 'die static'.Dale Rahn
2005-02-23Add missing copyright.Dale Rahn
2005-02-23fix copyright, use pxa2x0_gpio_intr_string()Dale Rahn
2005-02-23Move code from zaurus machdep to arm/xscale to live with the interruptDale Rahn
handler where it belongs code had been de-inlined to the wrong file.
2005-02-22Interrupt naming as provided by other interrupt handlers.Dale Rahn
2005-02-22- Shift the brightness scale so that 0% still keeps the backlight on.Uwe Stuehler
- Separate wsconsctl display.backlight from display.brightness parameter. - Set brightness to approximately 40% on startup, since we cannot read the current brightness level yet. - Restore the current brightness on resume. ok drahn@
2005-02-22call zkbd_hinge() at attach time, to init sc_hinge; drahn okTheo de Raadt
2005-02-22Be sure to attach the console keyboard, if any, before prompting for anMiod Vallat
alternate root device if boot -a.