summaryrefslogtreecommitdiff
path: root/sys/conf/files
AgeCommit message (Collapse)Author
2007-10-18Define a new attribute, pckbcslot, which pckbc and gsckbc provide, and toMiod Vallat
which pckbd and pms attach. This makes it simpler to add new controllers pckbd/pms can attach to.
2007-10-15the new dev/rnd.c uses the shared arc4 code instead of implimenting it byTheo de Raadt
itself, and thus demands the unconditional inclusion of crypto/arc4.c
2007-10-10Make context switching much more MI:Artur Grabowski
- Move the functionality of choosing a process from cpu_switch into a much simpler function: cpu_switchto. Instead of having the locore code walk the run queues, let the MI code choose the process we want to run and only implement the context switching itself in MD code. - Let MD context switching run without worrying about spls or locks. - Instead of having the idle loop implemented with special contexts in MD code, implement one idle proc for each cpu. make the idle loop MI with MD hooks. - Change the proc lists from the old style vax queues to TAILQs. - Change the sleep queue from vax queues to TAILQs. This makes wakeup() go from O(n^2) to O(n) there will be some MD fallout, but it will be fixed shortly. There's also a few cleanups to be done after this. deraadt@, kettenis@ ok
2007-09-12PCI and Cardbus hookup for the Broadcom AirForce devices.Marcus Glocker
OK jsg@
2007-07-18net80211 requires AES too.Damien Bergamini
2007-07-06sha1 is needed by wlan now, tooTheo de Raadt
2007-06-05IPX is about to go away, remove commented out IPX options in GENERIC andHenning Brauer
ipx related files (doesn't compile anyway)
2007-06-01remove crufty adosfs. everytime we try to change a vfs layer interface,Theo de Raadt
adosfs has the issue and in an entirely different way. noone uses this code so this is hte best way to handle the problem diff from pedro who went to sleep but we need to move ahead; ok thib
2007-06-01complete the sys/netbt import and adopt some more code to our interfacesUwe Stuehler
2007-05-31add an interface for work queues run from a kernel thread.David Gwynne
this type of code is implemented many times already in the kernel, this is a generic version of all those replicated code bases. originally from tedu@ ok tedu@ tom@ deraadt@
2007-05-30Unbreak the tree for gwkUwe Stuehler
2007-05-30Unbreak the tree - forgot a needs-flag; discovered by gwkUwe Stuehler
2007-05-30Import parts of the NetBSD bluetooth stack; ok gwk, and grange on removalUwe Stuehler
of the existing code
2007-05-29Move tokenring support to the attic where it can join the cards that whereClaudio Jeker
decomissioned aeon ago. We will not miss it at all. OK dlg@ henning@ and a lot of cheers by other in the room
2007-05-15Remove the MI implementation of mutexes and remove the __HAVE_MUTEXArtur Grabowski
option. Every architecture implements mutexes now.
2007-05-15start work on a driver for emulex fibre channel controllers.David Gwynne
it is split up into a bus independant chunk (dev/ic/sli*) and the attach glue (dev/pci/sli_pci.c) cos there are sbus varaints of this chip which i hope to get my hands on one day. this does nothing except attach to the LP8000 controllers.
2007-04-05After been attacked by Michael Buesch <mb@bu3sch.de> because we initiallyMarcus Glocker
were using some of their routines in the bcw driver, I decided to stop working on it. To avoid any further license chit chat I plain drop the driver.
2007-03-22import sili(4) so it can be worked on in the tree. this will support theDavid Gwynne
silicon image 3124/3132/3531 sata chipsets eventually. so far this is the autoconf glue, an actual match routine for the 3124, and interrupt establishment code. it is split up between pci and ic cos there are cardbus variants of these controllers that we can support in the future. thanks to jolan@ for the name, it was better liked than my initial suggestion of siisl(4).
2007-03-19attach softraid to the root of the device tree in a machine independantDavid Gwynne
way, rather than requiring some glue in each machines mainbus probe. it is still commented out. based on a discussion with miod@ ok marco@ deraadt@
2007-03-19Add a new device that provides a framework for IO manipulation. A very basicMarco Peereboom
implementation of a RAID 1 is included in this but it does not deal with failures yet. Disabled in GENERIC. Suggestions from and ok beck@ miod@ krw@ dlg@ deraadt@
2007-02-19pull in atascsi, a scsi to ata translation layer, so i can work on it inDavid Gwynne
tree. ive lost two large changes today thanks to my own stupidity which could have been avoided if they were in the tree. discussed with deraadt@ ok jsg@ grange@ an older version was ok marco@
2006-12-06replace Adaptec AIC-6915 Starfire driver with the fully bus_dma(9)-ableMartin Reindl
driver from NetBSD ok brad@ reyk@ additional testing Nick Nauwelaerts
2006-12-02On frame buffers which endianness differs from the host CPU, we can not affordMiod Vallat
using ovbcopy() in the erasecols emulop, as the ovbcopy implementation might do larger-than-byte loads and store, which will not have the expected result if the source and destination addresses are not similarly aligned. Instead, roll our own byte-only ovbcopy() in this case. This is made dependent on a config(8) attribute to avoid bloating platforms which do not need this, thus frame buffers which may set RI_BSWAP in ri_flg need to depend on this attribute. Problem spotted by matthieu@ using tcsh on sparc64 console.
2006-11-25Initial USB device controller (UDC) and USB CDC Ethernet function supportUwe Stuehler
for PXA27x/Zaurus, not enabled yet; for dlg and dale :)
2006-11-25Initial NAND flash support for Zaurus, not enabled yet; prodded by many.Uwe Stuehler
2006-11-17This is a very initial import for a driver which supports the IEEE 802.11Marcus Glocker
Broadcom BCM43xx chipset. Device attaches, but has no further functionality yet. The work has been done by Jon Simola <jsimola@gmail.com>, based on the existing bce(4) code. He will continue to work on the driver and try to make further progress. ok deraadt@
2006-10-27mcbride forgot to pull in the newly created pf_ruleset.cTheo de Raadt
2006-10-15First stubs for a new driver for the Marvell Libertas chips.Claudio Jeker
The card correctly loads the firmware and it is possible to send a few simple commands to the card but that's it. No packet are sent or received. Only the Netgear WG511v2 cardbus card is tested. A cheese fondue and a bigger amount of white wine was needed to make the interrupts work -- until last night the driver was uploading the firmware to fast and the card garbled the image without moaning. It took us a full day and hundreds of test kernels to figure that out. Joint work with mglocker@, fondue by mbalmer@ OK mglocker@, get it in deraadt@
2006-08-22Very initial import to support the PrismGT chipset (FullMAC for now).Marcus Glocker
ok deraadt@
2006-08-06Time for rcons code to retire.Miod Vallat
2006-08-03Remove the tb(4) line discipline and manual page. I found no man pagesMarc Balmer
referencing tb(4). ok deraadt
2006-08-03Inital import for the acx(4) driver.Marcus Glocker
ok deraadt@ jsg@
2006-07-19make kernels w/o PTRACE compile again.Alexander von Gernler
help from mickey@, "commit it" miod@
2006-07-18get rid of arc network support. we have no users of it so this is deadDavid Gwynne
code. however, it is still cluttering up the kernel namespace a bit. it is better gone. ok claudio@
2006-06-29remove mpt. it has since been replaced with mpi, which is a smaller andDavid Gwynne
cleaner driver that supports more hardware.
2006-06-19move clock_subr.c to a better place, and now it is always in the kernelTheo de Raadt
so that things can use it; tested on all architectures; ok kettenis
2006-06-17Move AMRR rate control algorithm out of wpi(4) and ural(4), into net80211.Damien Bergamini
ok brad@
2006-06-02Add a clonable devices implementation. Hacked along with thib@, inputPedro Martelletto
from krw@ and toby@, subliminal prodding from dlg@, okay deraadt@.
2006-06-01Add basic NMEA0183 support as a tty line discipline. The line disciplineMarc Balmer
decodes NMEA messages completely transparent to userland applications, i.e. userland can still use the NMEA stream and talk to the device. If data is received, a timedelta sensor suitable for ntpd is created. The timestamp is not very precise at the moment, use of this is experimental at best. "get it in or we see how well the swiss people can swim" deraadt@
2006-05-28Support for standard SD host controllers like the Ricoh 5C822, a smallUwe Stuehler
generic bus layer, and SCSI emulation for SD/MMC memory cards.
2006-05-27Do the same thing as for IPv4. Use a sysctl to enable/disable mfrowardingClaudio Jeker
and additionaly make the code part of the MROUTING option. Put it in deraadt@
2006-05-27add mpi(4), an alternative (replacement) driver for lsi logic fusion mptDavid Gwynne
controllers currently supported by mpt(4). ok marco@
2006-05-27Make NCOM_{CARDBUS,GSC,ISAPNP} defined again in com.h, as there is codeMiod Vallat
relying upon them.
2006-04-28Instrumentation for an in-kernel getcwd() implementation.Pedro Martelletto
Not yet activated. Diff by marius@ long ago, from NetBSD. Okay miod@ and krw@.
2006-04-06Hook up mfi, remains disabled.Marco Peereboom
2006-03-21Implementation of the Michael MIC as defined in IEEE 802.11i for TKIP.Reyk Floeter
The MIC generates a weak 64bit digest protected by an additional key. Obviously, this digest alg is required for future IEEE 802.11i/WPA support. test vectors passed on alpha amd64 mvme68k mvme88k sgi sparc sparc64 vax i386 ok djm@
2006-03-12remove BPF filter support if the bpfilter device is removed.Brad Smith
2006-03-04Dallas 1-Wire bus support. Includes the following drivers:Alexander Yurchenko
gpioow(4) 1-Wire bus bit-banging through GPIO pin onewire(4) 1-Wire bus driver owid(4) 1-Wire ID family type device owtemp(4) 1-Wire temperature family type device Drivers for RS-232 and USB bus masters will follow. ok deraadt@
2006-02-01a driver for the phillips pcf8584 i2c controller as found on the sun netraDavid Gwynne
t1 105. tested by henning@ djm@ ok kettenis@ put it in deraadt@
2006-01-29Disable iic whenever ipmi is enabled. This fixes boxes like Sun x4200 thatMarco Peereboom
freak out when more than one device driver touch the i2c devices. Reported by: Srebrenko Sehic <ssehic at gmail dot com> ok kettenis@