| Age | Commit message (Collapse) | Author |
|---|
|
this type of code is implemented many times already in the kernel, this is
a generic version of all those replicated code bases.
originally from tedu@
ok tedu@ tom@ deraadt@
|
|
|
|
|
|
of the existing code
|
|
decomissioned aeon ago. We will not miss it at all.
OK dlg@ henning@ and a lot of cheers by other in the room
|
|
option. Every architecture implements mutexes now.
|
|
it is split up into a bus independant chunk (dev/ic/sli*) and the attach
glue (dev/pci/sli_pci.c) cos there are sbus varaints of this chip which i
hope to get my hands on one day.
this does nothing except attach to the LP8000 controllers.
|
|
were using some of their routines in the bcw driver, I decided to stop
working on it. To avoid any further license chit chat I plain drop the
driver.
|
|
silicon image 3124/3132/3531 sata chipsets eventually.
so far this is the autoconf glue, an actual match routine for the 3124, and
interrupt establishment code. it is split up between pci and ic cos there
are cardbus variants of these controllers that we can support in the
future.
thanks to jolan@ for the name, it was better liked than my initial
suggestion of siisl(4).
|
|
way, rather than requiring some glue in each machines mainbus probe.
it is still commented out.
based on a discussion with miod@ ok marco@ deraadt@
|
|
implementation of a RAID 1 is included in this but it does not deal with
failures yet. Disabled in GENERIC.
Suggestions from and ok beck@ miod@ krw@ dlg@ deraadt@
|
|
tree. ive lost two large changes today thanks to my own stupidity which
could have been avoided if they were in the tree.
discussed with deraadt@
ok jsg@ grange@ an older version was ok marco@
|
|
driver from NetBSD
ok brad@ reyk@
additional testing Nick Nauwelaerts
|
|
using ovbcopy() in the erasecols emulop, as the ovbcopy implementation might
do larger-than-byte loads and store, which will not have the expected result
if the source and destination addresses are not similarly aligned.
Instead, roll our own byte-only ovbcopy() in this case. This is made dependent
on a config(8) attribute to avoid bloating platforms which do not need this,
thus frame buffers which may set RI_BSWAP in ri_flg need to depend on this
attribute.
Problem spotted by matthieu@ using tcsh on sparc64 console.
|
|
for PXA27x/Zaurus, not enabled yet; for dlg and dale :)
|
|
|
|
Broadcom BCM43xx chipset. Device attaches, but has no further
functionality yet.
The work has been done by Jon Simola <jsimola@gmail.com>, based on the
existing bce(4) code. He will continue to work on the driver and try
to make further progress.
ok deraadt@
|
|
|
|
The card correctly loads the firmware and it is possible to send a few
simple commands to the card but that's it. No packet are sent or received.
Only the Netgear WG511v2 cardbus card is tested.
A cheese fondue and a bigger amount of white wine was needed to make the
interrupts work -- until last night the driver was uploading the firmware
to fast and the card garbled the image without moaning. It took us a full
day and hundreds of test kernels to figure that out.
Joint work with mglocker@, fondue by mbalmer@
OK mglocker@, get it in deraadt@
|
|
ok deraadt@
|
|
|
|
referencing tb(4).
ok deraadt
|
|
ok deraadt@ jsg@
|
|
help from mickey@, "commit it" miod@
|
|
code. however, it is still cluttering up the kernel namespace a bit. it is
better gone.
ok claudio@
|
|
cleaner driver that supports more hardware.
|
|
so that things can use it; tested on all architectures; ok kettenis
|
|
ok brad@
|
|
from krw@ and toby@, subliminal prodding from dlg@, okay deraadt@.
|
|
decodes NMEA messages completely transparent to userland applications, i.e.
userland can still use the NMEA stream and talk to the device. If data
is received, a timedelta sensor suitable for ntpd is created. The timestamp
is not very precise at the moment, use of this is experimental at best.
"get it in or we see how well the swiss people can swim" deraadt@
|
|
generic bus layer, and SCSI emulation for SD/MMC memory cards.
|
|
and additionaly make the code part of the MROUTING option. Put it in deraadt@
|
|
controllers currently supported by mpt(4).
ok marco@
|
|
relying upon them.
|
|
Not yet activated. Diff by marius@ long ago, from NetBSD.
Okay miod@ and krw@.
|
|
|
|
The MIC generates a weak 64bit digest protected by an additional key.
Obviously, this digest alg is required for future IEEE 802.11i/WPA
support.
test vectors passed on alpha amd64 mvme68k mvme88k sgi sparc sparc64 vax i386
ok djm@
|
|
|
|
gpioow(4) 1-Wire bus bit-banging through GPIO pin
onewire(4) 1-Wire bus driver
owid(4) 1-Wire ID family type device
owtemp(4) 1-Wire temperature family type device
Drivers for RS-232 and USB bus masters will follow.
ok deraadt@
|
|
t1 105.
tested by henning@ djm@
ok kettenis@ put it in deraadt@
|
|
freak out when more than one device driver touch the i2c devices.
Reported by: Srebrenko Sehic <ssehic at gmail dot com>
ok kettenis@
|
|
also activate ISA attachment;
ok brad@
|
|
some cases; also silence a few udf messages unless option DIAGNOSTIC.
Tests and tweaks and ok pedro@
|
|
lm78var.h.
Now that I've completely rewritten the driver, replace copyright with my own.
suggested by deraadt@
|
|
This brings net80211 support and support for newer hardware.
In addition ancontrol is no longer needed.
This driver does not yet work on big endian archs like the previous
one did.
"do it" deraadt@
|
|
chipsets in ral(4).
- restructure the code a bit; split ic/ral.c into ic/rt2560.c and ic/rt2661.c
- import the 8051 microcode files required by these chipsets.
- more to come; there is currently no automatic rate control and some
features are untested (hostap and ibss modes for instance). most of
the pre-802.11n capabilities of the RT2661 chipset are not supported
(like frame aggregation, piggy-back). MIMO should work though the
performance/range gain has not been measured.
|
|
attributes.
|
|
out of procfs and gets a ptrace request PT_{READ,WRITE}_{I,D} as argument;
also procfs_checkioperm() becomes process_checkioperm().
From art@ some time ago; ok kettenis@ pedro@
|
|
|
|
|
