summaryrefslogtreecommitdiff
path: root/sys/conf
AgeCommit message (Collapse)Author
2007-06-15disable softraid (because ↵Theo de Raadt
sr_boot_assembly->readdisklabel->readdoslabel->biowait) is what happens on late-cold architectures. something else has to be fixed first before that is permitted, i guess.
2007-06-05IPX is about to go away, remove commented out IPX options in GENERIC andHenning Brauer
ipx related files (doesn't compile anyway)
2007-06-02Enable softraid so that people can start testing it.Marco Peereboom
Note: this is a work in progress! this is under active development and things will change. prompted and ok deraadt
2007-06-01remove crufty adosfs. everytime we try to change a vfs layer interface,Theo de Raadt
adosfs has the issue and in an entirely different way. noone uses this code so this is hte best way to handle the problem diff from pedro who went to sleep but we need to move ahead; ok thib
2007-06-01complete the sys/netbt import and adopt some more code to our interfacesUwe Stuehler
2007-05-31add an interface for work queues run from a kernel thread.David Gwynne
this type of code is implemented many times already in the kernel, this is a generic version of all those replicated code bases. originally from tedu@ ok tedu@ tom@ deraadt@
2007-05-31NFSv2 cannot cope with a big number of vnodes, so revert to NPROC-basedPedro Martelletto
calculation until the problem is fixed, okay beck@ art@
2007-05-30Unbreak the tree for gwkUwe Stuehler
2007-05-30Unbreak the tree - forgot a needs-flag; discovered by gwkUwe Stuehler
2007-05-30Import parts of the NetBSD bluetooth stack; ok gwk, and grange on removalUwe Stuehler
of the existing code
2007-05-29Move tokenring support to the attic where it can join the cards that whereClaudio Jeker
decomissioned aeon ago. We will not miss it at all. OK dlg@ henning@ and a lot of cheers by other in the room
2007-05-28bio for all archs, ok krw@ kettenis@ sounds good marco@ go for it deraadt@Todd T. Fries
2007-05-27back out bio, breaks dlg's sparc64 v215Todd T. Fries
prompted by/ok dlg@ deraadt@
2007-05-26Dynamic buffer cache. Initial diff from mickey@, okay art@ beck@ toby@Pedro Martelletto
deraadt@ dlg@.
2007-05-26prodded by marco, enable bio everywhereTodd T. Fries
grudgingly ok deraadt@
2007-05-15Remove the MI implementation of mutexes and remove the __HAVE_MUTEXArtur Grabowski
option. Every architecture implements mutexes now.
2007-05-15start work on a driver for emulex fibre channel controllers.David Gwynne
it is split up into a bus independant chunk (dev/ic/sli*) and the attach glue (dev/pci/sli_pci.c) cos there are sbus varaints of this chip which i hope to get my hands on one day. this does nothing except attach to the LP8000 controllers.
2007-04-30Enable FFS2, okay deraadt@Pedro Martelletto
2007-04-17Add commented out entry for FFS2Todd C. Miller
2007-04-05After been attacked by Michael Buesch <mb@bu3sch.de> because we initiallyMarcus Glocker
were using some of their routines in the bcw driver, I decided to stop working on it. To avoid any further license chit chat I plain drop the driver.
2007-03-22import sili(4) so it can be worked on in the tree. this will support theDavid Gwynne
silicon image 3124/3132/3531 sata chipsets eventually. so far this is the autoconf glue, an actual match routine for the 3124, and interrupt establishment code. it is split up between pci and ic cos there are cardbus variants of these controllers that we can support in the future. thanks to jolan@ for the name, it was better liked than my initial suggestion of siisl(4).
2007-03-19attach softraid to the root of the device tree in a machine independantDavid Gwynne
way, rather than requiring some glue in each machines mainbus probe. it is still commented out. based on a discussion with miod@ ok marco@ deraadt@
2007-03-19Add a new device that provides a framework for IO manipulation. A very basicMarco Peereboom
implementation of a RAID 1 is included in this but it does not deal with failures yet. Disabled in GENERIC. Suggestions from and ok beck@ miod@ krw@ dlg@ deraadt@
2007-03-12better desiredvnodes not based on maxusers; pedro@ deraadt@ okMichael Shalayeff
2007-03-12unlock tree, move on towards 4.1-currentTheo de Raadt
2007-03-01strip off -beta; ok deraadtPeter Valchev
2007-02-19pull in atascsi, a scsi to ata translation layer, so i can work on it inDavid Gwynne
tree. ive lost two large changes today thanks to my own stupidity which could have been avoided if they were in the tree. discussed with deraadt@ ok jsg@ grange@ an older version was ok marco@
2007-02-14recycle swbuf that had been long gone (w/ old vm)Michael Shalayeff
(this is in preparation for approaching GBC work)
2007-02-124.1-betaHenning Brauer
2006-12-06replace Adaptec AIC-6915 Starfire driver with the fully bus_dma(9)-ableMartin Reindl
driver from NetBSD ok brad@ reyk@ additional testing Nick Nauwelaerts
2006-12-02On frame buffers which endianness differs from the host CPU, we can not affordMiod Vallat
using ovbcopy() in the erasecols emulop, as the ovbcopy implementation might do larger-than-byte loads and store, which will not have the expected result if the source and destination addresses are not similarly aligned. Instead, roll our own byte-only ovbcopy() in this case. This is made dependent on a config(8) attribute to avoid bloating platforms which do not need this, thus frame buffers which may set RI_BSWAP in ri_flg need to depend on this attribute. Problem spotted by matthieu@ using tcsh on sparc64 console.
2006-11-25Initial USB device controller (UDC) and USB CDC Ethernet function supportUwe Stuehler
for PXA27x/Zaurus, not enabled yet; for dlg and dale :)
2006-11-25Initial NAND flash support for Zaurus, not enabled yet; prodded by many.Uwe Stuehler
2006-11-17This is a very initial import for a driver which supports the IEEE 802.11Marcus Glocker
Broadcom BCM43xx chipset. Device attaches, but has no further functionality yet. The work has been done by Jon Simola <jsimola@gmail.com>, based on the existing bce(4) code. He will continue to work on the driver and try to make further progress. ok deraadt@
2006-10-27mcbride forgot to pull in the newly created pf_ruleset.cTheo de Raadt
2006-10-15First stubs for a new driver for the Marvell Libertas chips.Claudio Jeker
The card correctly loads the firmware and it is possible to send a few simple commands to the card but that's it. No packet are sent or received. Only the Netgear WG511v2 cardbus card is tested. A cheese fondue and a bigger amount of white wine was needed to make the interrupts work -- until last night the driver was uploading the firmware to fast and the card garbled the image without moaning. It took us a full day and hundreds of test kernels to figure that out. Joint work with mglocker@, fondue by mbalmer@ OK mglocker@, get it in deraadt@
2006-09-174.0-current. yes deraadtSteven Mestdagh
2006-09-17moving to 4.1-currentTheo de Raadt
2006-08-28move to official 4.0Theo de Raadt
2006-08-22Very initial import to support the PrismGT chipset (FullMAC for now).Marcus Glocker
ok deraadt@
2006-08-06Time for rcons code to retire.Miod Vallat
2006-08-03Remove the tb(4) line discipline and manual page. I found no man pagesMarc Balmer
referencing tb(4). ok deraadt
2006-08-03Inital import for the acx(4) driver.Marcus Glocker
ok deraadt@ jsg@
2006-07-26crank to 4.0-betaTheo de Raadt
2006-07-19make kernels w/o PTRACE compile again.Alexander von Gernler
help from mickey@, "commit it" miod@
2006-07-18get rid of arc network support. we have no users of it so this is deadDavid Gwynne
code. however, it is still cluttering up the kernel namespace a bit. it is better gone. ok claudio@
2006-06-29remove mpt. it has since been replaced with mpi, which is a smaller andDavid Gwynne
cleaner driver that supports more hardware.
2006-06-19move clock_subr.c to a better place, and now it is always in the kernelTheo de Raadt
so that things can use it; tested on all architectures; ok kettenis
2006-06-17Move AMRR rate control algorithm out of wpi(4) and ural(4), into net80211.Damien Bergamini
ok brad@
2006-06-14enable the NMEA 0183 line discipline in GENERIC. see nmea(4) for details.Marc Balmer
ok deraadt