| Age | Commit message (Collapse) | Author |
|---|
|
specified via its disklabel UID. The mapping from the disklabel UID to the
real disk and the opening of the resulting device is performed atomically
using a single ioctl.
ok krw@ deraadt@
|
|
comments from dlg@.
No need for a separate bufq.h, keep all of in buf.h; As requested by kittens
and deraadt.
Only sd(4) and wd(4) for now. The rest of the drivers will be converted soon,
also other goodies like heuristics for sd(4) for selecting the bufq type and
the death of disksort() are forthcoming.
Tested on: i386, amd64, sparc64, macppc, loongson and alpha by myself and
phessler.
OK art@, beck@, kettenis@, oga@
|
|
implied.
|
|
OK sthen@
|
|
chips (AR9003), which differs from the currently supported
families (AR5008, AR9001 and AR9002).
The main differences (from a driver point of view) are:
* DMA:
Tx and Rx descriptors have changed.
A single Tx descriptor can now reference up to 4 scatter/gather
DMA segments.
There is now a DMA ring for reporting Tx status with separate
Tx status descriptors (this ring is used to report Tx status for
all the Tx FIFOs).
Rx status descriptors are now put at the beginning of Rx buffers
and do not need to be allocated separately from buffers.
There are two Rx FIFOs (low priority and high priority) instead
of one.
* ROM:
The AR9003 family uses OTP-ROM instead of EEPROM.
Reading the ROM is totally insane since vendors can provide only
the chunks of ROM that differ from a default image (and thus the
default image has to be stored in the driver).
This is referenced as "compressed ROM" in the Linux driver, though
there is no real compression involved, at least for the moment.
* PHY registers:
All PHY registers have changed.
Some registers offsets do not fit on 16 bits anymore, but
since they are 32-bit aligned, we can still make them fit on
16 bits to save .rodata space in initialization tables.
* MAC registers:
Some MAC registers offsets have changed (GPIO, interrupt masks)
which is quite annoying (though ~98% remain the same.)
* Initialization values:
Initialization values are now split in mac/soc/bb/radio blocks
and pre/core/post phases in the Linux driver. I have chosen to
not go that road and merge these blocks in modal and non-modal
initialization values (similar to the other families).
The initialization order remains exactly the same as the Linux
driver though.
To manage these differences, I have split athn.c in two backends:
ar5008.c contains the bits that are specific to the AR5008,
AR9001 and AR9002 families (used by ar5416.c, ar9280.c,
ar9285.c and ar9287.c) and that were previously in athn.c.
ar9003.c contains the bits that are specific to the new
AR9003 family (used by ar9380.c only for now.)
I have introduced a thin hardware abstraction layer (actually
a set of pointers to functions) that is used in athn.c.
My intent is to keep this abstraction layer as thin as possible
and not to create another ugly pile of abstraction layers a la
MadWifi.
I think I've managed to keep things sane, probably at the expense
of duplicating some code in both ar5008.c and ar9003.c, but at
least we do not have to dig through layers and layers of virtual
descriptors to figure out what is mapped to the hardware.
Tested for non-regression on various AR5416 (sparc64+i386), AR9281
and AR9285 (i386 only) adapters.
AR9380 part is not tested (hardware is not available to the general
public yet).
Committed over my AR9285 2.0.
|
|
OK kettenis, krw, dlg
|
|
I forgot that uvm_object.c wasn't build if SMALL_KERNEL. Fix this by building
the file unconditionally and only building the less used functions when
SMALL_KERNEL is not defined.
unbreaks ramdisk build. ok jsg@
|
|
OK sthen, jsg
|
|
recommit pmemrange:
physmem allocator: change the view of free memory from single
free pages to free ranges. Classify memory based on region with
associated use-counter (which is used to construct a priority
list of where to allocate memory).
Based on code from tedu@, help from many.
Useable now that bugs have been found and fixed in most architecture's
pmap.c
ok by everyone who has done a pmap or uvm commit in the last year.
|
|
|
|
and an i2c attachment.
No functional change; ok jsg@ deraadt@
|
|
ok deraadt@, ariane@
|
|
|
|
|
|
After release, someone please remind us to turn it on again. It helps
find bugs. We just don't want people to get hosed too much during
release.
|
|
|
|
|
|
|
|
ok deraadt yasuoka
|
|
acceleration for PPP access concentrator.
ok mcbride@ dlg@ deraadt@ reyk@.
|
|
since blambert@ rewrote the allocation code.
|
|
It was backed out as part of the date-based revert after c2k9.
"you can commit that" kettenis@
original diff oked by ariane@, art@.
|
|
written from scratch based on the vendor driver for Linux (ath9k).
AR9285 and AR9287 parts are 100% untested.
only basic functionnalities are enabled for now.
committed over an AR9281.
"commit" deraadt
|
|
so that a bridge-etherip-tunnel host can join into the bridge itself.
It is ridiculous that this capability was missing from our network
stack portfolio, considering we have bgp and ospf daemons...
discussed at length with claudio
|
|
tested by phessler@ pyr@
ok claudio@
"go ahead" deraadt@
|
|
|
|
- queue packets from pf(4) to a userspace application
- reinject packets from the application into the kernel stack.
The divert socket can be bound to a special "divert port" and will
receive every packet diverted to that port by pf(4).
The pf syntax is pretty simple, e.g.:
pass on em0 inet proto tcp from any to any port 80 divert-packet port 1
A lot of discussion have happened since my last commit that resulted
in many changes and improvements.
I would *really* like to thank everyone who took part in the discussion
especially canacar@ who spotted out which are the limitations of this approach.
OpenBSD divert(4) is meant to be compatible with software running on
top of FreeBSD's divert sockets even though they are pretty different and will
become even more with time.
discusses with many, but mainly reyk@ canacar@ deraadt@ dlg@ claudio@ beck@
tested by reyk@ and myself
ok reyk@ claudio@ beck@
manpage help and ok by jmc@
|
|
Reader.
|
|
Sorry.
|
|
- queue packets from pf(4) to a userspace application
- reinject packets from the application into the kernel stack.
The divert socket can be bound to a special "divert port" and will
receive every packet diverted to that port by pf(4).
The pf syntax is pretty simple, e.g.:
pass on em0 inet proto tcp from any to any port 80 divert-packet port 8000
test, bugfix and ok by reyk@
manpage help and ok by jmc@
no objections from many others.
|
|
problem noticed by deraadt@
ok beck@
|
|
attachment. Add SBus support to the bus-agnostic code.
|
|
around and add POOL_DEBUG as an enabled option, removing the define from subr_pool.c.
comments & ok deraadt@.
|
|
It currently doesn't compile and this is unlikely to change
as there are many alternatives now since we no longer live
in the early 1990s and Metricom went bankrupt some time ago.
ok many @
|
|
each mount, and when work is "found", peg an aiod to that mount todo the
I/O. Make nfs_asyncio() a bit smarter when deciding when to do asyncio
and when to force it sync, this is done by keeping the aiod's one two lists,
an "idle" and an "all" list, so asyncio is only done when there are aiods
hanging around todo it for us or are already pegged to the mount.
Idea liked by at least beck@ (and I think art@).
Extensive testing done by myself and jasper and a few others on various
arch's.
Ideas/Code from Net/Free.
OK blambert@.
|
|
for claudio@ ok deraadt@
|
|
a few arches where toolchain limitations apply) will embed some symbolic
information about the various structs used within the kernel, and have
new ddb commands allowing struct display and some useful information
gathering. Kernel rodata increase varies accross platforms from ~150KB to
~300KB.
This option is not enabled by default.
|
|
thinks they could be available via multiple paths. those stolen
devices are then made available via mpath(4).
this is the minimum amount of code to implement the stealing. it
is generally broken and very brittle, so it is currently disabled.
it is going in so i can work on it in the tree.
|
|
No longer allocate a static amount of memory for messages in MD
boot path; message queues, message metadata, and message data now
all use dynamic memory, which means that runtime sysctls should now
be trivial to implement.
Since I'm going to be around all week to fix any breakage, this should
probably just go in now.
|
|
ok marco@
|
|
|
|
|
|
|
|
have been going on. this appears to bring us back to stable state.
lots of testing by oga and ariane and my self.
|
|
allocator).
"i can't see any obvious problems" oga
|
|
separately).
a change at or just before the hackathon has either exposed or added a
very very nasty memory corruption bug that is giving us hell right now.
So in the interest of kernel stability these diffs are being backed out
until such a time as that corruption bug has been found and squashed,
then the ones that are proven good may slowly return.
a quick hitlist of the main commits this backs out:
mine:
uvm_objwire
the lock change in uvm_swap.c
using trees for uvm objects instead of the hash
removing the pgo_releasepg callback.
art@'s:
putting pmap_page_protect(VM_PROT_NONE) in uvm_pagedeactivate() since
all callers called that just prior anyway.
ok beck@, ariane@.
prompted by deraadt@.
|
|
|
|
shitz.
Code mostly from netbsd with some tweaks from me. The loaning case is
specifcically if 0ed out right now because we do not do loaning.
ok ariane@, art@.
|
|
|
|
|
