| Age | Commit message (Collapse) | Author |
|---|
|
interferes with C99's anonymous stuff.
ok millert@
|
|
|
|
SET PIO mode. Heh, this might have been the cause of all those old
PIO mode aborts.
|
|
|
|
|
|
Noted by Jacob Meuser <jakemsr@jakemsr.com>
|
|
|
|
(Look ma, I might have broken the tree)
|
|
|
|
|
|
suggesting this fix.
Update atapiscsi Ultra DMA downgrade logic.
|
|
device registers as this may cause lock-ups on some chipsets
Clean-up in atapiscsi. Get rid of claim_irq. Instead, atapiscsi always
returns -1 (maybe) from the interrupt handler.
|
|
|
|
Add back IDENTIFY after soft reset.
Fix ch_flags -> ch_status in a couple places
|
|
|
|
|
|
|
|
|
|
drvp structure
|
|
Fix around the logic in the reset code to be more tolerant of weird devices.
Pause a long time after reset to allow device to reboot itself
|
|
|
|
|
|
functions to return status flags.
Note: Changing code to have DMA interface indicate when I/O is done (a la NetBSD) was considered. It was rejected due to questionable backward compatability
with ISA DMA and MAC obio DMA
Added irqack from NetBSD (though this feature should really be in the
PCI interrupt handlers)
Use pool
|
|
Cleanup atapiscsi driver a bit by moving fields out of xfer.
|
|
|
|
|
|
Removed hardcoded WDCDEBUG definitions.
|
|
on a combination of VIA South Bridge and old Toshiba drive.
DMA transfers of 4 bytes work for my old Mitsumi FX600 drive.
Assume Toshiba drive is in error.
Avoid situation by only invoking DMA transfers on transfers over 100 bytes.
Thanks to Tim Howe for the hardware for testing
|
|
|
|
|
|
in by default.
|
|
|
|
|
|
|
|
both DRQ and BSY.
The driver has been adjusted to ignore invalid/unexpected phases
while traversing the state machine.
This may break drives that do no set ireason correctly.
|
|
(return 0x00 status persistently). Send them identify to wake them up.
Flag value 0x10000 will enable probe messages for a channel/controller.
When UKC supports setting flags, this will be useful debugging
failing IDE detects without kernel recompiles.
|
|
|
|
|
|
SCSI/ATAPI detach is not here yet.
Minor cleanup of wdc. Downgrade to UDMA mode 1 before going further.
Want to stay in UDMA modes because they're more error-resilient due to
a CRC.
Got rid of some of the ridiculous amount of softc sharing going on.
Hopefully, this will make the life of whoever goes in and fixes the
ref-counting to be correct easier.
|
|
during probe causes the devices pain.
So, I don't do that any more. :-)
Also, try ATAPI_IDENTIFY_DEVICE a couple times. Seems to help with an
old NEC drive.
|
|
Fix for some non-ATAPI-4 compliant drives
|
|
Use ticks not time. Ticks is monotonically increasing.
Fix error output in wdc_atapi_ctrl
ATAPI errors -> SCSI errors conversion now works better
Other minor cleanup
|
|
Better timeout logic
|
|
Major restructuring of the code path that sends ATAPI packet commands.
One set of functions works in polling, process, and interrupt contexts.
|
|
driver (pciide, wdc, etc.)
Remove #define WDCDEBUG from top of files
More fixes to ATAPISCSI logic:
Not all devices transition correctly between phases. Devices are supposed
to keep BSY high until they've set the registers to the next sensible
state. Some devices drop BSY and leave the registers in an old or
nonsense state. Our polling code is extremely sensitive to this
(though an early itnerrupt could also observe this). So, if the device is
in an unexpected state, the new polling code waits for a while in the hope
that it enters a better state.
This seems to fix many of the problems reported.
Also, there was a horrible bug which would cause sense to fail on a ATAPI
command that sent data to the drive
|
|
|
|
Use xfer->c_bcount and not sc_xfer->datalen when passing our buffer limit
to the device. In the case of SENSE, we were sending 0 as our buffer limit,
potentially confusing some devices.
Cap the bytes/interrupt at 65534, which prevents odd size transfers. Odd
size transfers, while not inherently evil, are kind of weird through a 16-bit
wide interface.
|
|
Changed SCSI XS_TIMEOUT error to SCSI XS_RESET error to better reflect
that we had to reset the bus
Don't downgrade DMA modes if the transfer that failed wasn't using DMA
|
|
Fix wdc_select_drive to no longer wait for free channel (not strictly correct
but we couldn't handle a non-free channel anyway)
Major changes to the ATAPI interrupt logic to reduce reliance on the drive
setting the bits correctly. Deal with situation that we get length = 0 back
from the drive on transfer (instead of potentially looping forever).
Timeout in drive setup should not cause the drive to downgrade modes.
|
|
Separate wdc_probe_caps into wdc_probe_caps and wdc_print_caps for more
flexibility in printing capability information.
Get rid of wdc_final_attach.
Include name of device (e.g. cd0), if possible, on errors.
atapiscsi layer work:
Put a pointer to the SCSI device into ata_drive_datas' drv_softc field
Simplify, simplify, simplify. Got rid of a bunch of fields in atapiscsi_softc
Delay printing capabilities until we know the real device name (e.g. st0)
|
