| Age | Commit message (Collapse) | Author | |
|---|---|---|---|
| 2007-11-15 | New driver for Ralink RT2860 chipset. | Damien Bergamini | |
| Attaches as 'ral' as it shares the PCI and CardBus frontends with RT2560 and RT2661 though it is actually a separate driver. Requires a firmware that can't be redistributed with the base system due to license restrictions (exact same license as iwn(4) firmware). The 802.11n capabilities not yet supported (except MIMO). Great thanks to Sam Fourman Jr for donating hardware. ok deraadt@ | |||
| 2007-10-21 | Replace Cardbus_conf_* calls by cardbus_conf_* ones. This solves the | Marcus Glocker | |
| panic 'trap type 300` seen on macppc and makes my Linksys WPC54G Ver 3 cardbus device work entirely on my PowerBook G4. | |||
| 2007-09-27 | Add automatic rate control (AMRR). | Marcus Glocker | |
| 2007-09-24 | Remove BCM4311 and BCM4312 which are PCIe chipsets and therefore will not | Marcus Glocker | |
| come in Cardbus devices. From brad@ | |||
| 2007-09-20 | Print a colon out front to correct the interrupt string printing. | Brad Smith | |
| ok jsg@ dlg@ | |||
| 2007-09-19 | fix CARDBUS_DEBUG | Martin Reindl | |
| noted by Markus Hennecke | |||
| 2007-09-19 | Add a missing prototype in the non-static case. | Miod Vallat | |
| 2007-09-17 | Un-staticize if option DDB. | Miod Vallat | |
| 2007-09-15 | Properly fill in some of the pci information the driver uses internally. | Jonathan Gray | |
| 2007-09-13 | No variable names in prototypes. | Marcus Glocker | |
| 2007-09-13 | Enable access to PCI and Cardbus config space from the driver. Lets us | Marcus Glocker | |
| power on the device. | |||
| 2007-09-12 | PCI and Cardbus hookup for the Broadcom AirForce devices. | Marcus Glocker | |
| OK jsg@ | |||
| 2007-09-05 | Only match on RTL8185 if RTW_DEBUG is set, support for the RTL8185 | Jonathan Gray | |
| was never finished due to a lack of information on the radios. ok reyk@ | |||
| 2007-05-20 | Convert ehci and ucom to rwlock. | Jonathan Gray | |
| Kill the usb specific lockmgr wrapper as nothing uses it now. ok thib@ | |||
| 2007-05-08 | backout while the amd64 puc situation is rethought | Theo de Raadt | |
| 2007-05-08 | move com_activate() to where it belongs | Theo de Raadt | |
| 2007-05-08 | repair com/fxp foo_detach() stuff, the hardest part being the pccom mess | Theo de Raadt | |
| 2007-05-08 | put more foo_detach() routines where they are used | Theo de Raadt | |
| 2007-05-08 | rl_detach() is only used for cardbus case | Theo de Raadt | |
| 2007-05-08 | dc_detach() is only used by cardbus code, so move it there; ok jsg | Theo de Raadt | |
| 2007-05-05 | move xl_detach() -- which is only used by cardbus -- to the cardbus code. | Theo de Raadt | |
| ok jsg | |||
| 2007-04-05 | After been attacked by Michael Buesch <mb@bu3sch.de> because we initially | Marcus Glocker | |
| were using some of their routines in the bcw driver, I decided to stop working on it. To avoid any further license chit chat I plain drop the driver. | |||
| 2007-03-22 | Perform legacy emulation handover for USB1 companion controllers immediately | Christopher Pascoe | |
| but defer the remainder of their initialisation until after the other devices on their PCI bus have attached. This ensures that any USB2 controller has also completed its initialisation before we start to initialise the USB1 parts. This minimises the chance that a nasty SMM implementation will trash the USB1 controller's config when it performs legacy emulation handover of the USB2 part. This time without accidentally leaving the OHCI controller shutdown, and with some cosmetic fixes. ok dlg@, OHCI tests mglocker@ | |||
| 2007-03-04 | Use CARDBUS_PRODUCT macro to read product id. | Marcus Glocker | |
| 2007-03-04 | Kill a cardbus dependency which breaked kernel compilation e.g. for | Marcus Glocker | |
| sparc*. OK deraadt | |||
| 2007-02-26 | Some KNF. | Marcus Glocker | |
| 2007-02-26 | We need to save some PCI infos in our softc struct for further decisions | Marcus Glocker | |
| in the driver code. | |||
| 2007-02-25 | Power on/off cardbus socket at attach/detach time. Makes firmware upload | Marcus Glocker | |
| work on my BCM4318 cardbus device now. | |||
| 2007-02-25 | No need to fillup chip_rev here. | Marcus Glocker | |
| 2007-02-25 | Adjust var name so cardbus attaches again. | Marcus Glocker | |
| 2006-12-08 | From Jon Simola <simola@mecha.com>: | Marcus Glocker | |
| Style and whitespace cleanup. | |||
| 2006-12-06 | From Jon Simola <simola@mecha.com>: | Marcus Glocker | |
| Add bus-specific config space read and write functions, this fixes the attach for ian@darwinsys.com and properly enumerates multiple cores. | |||
| 2006-11-29 | Add another ID to match for the 88W8310 chip. | Marcus Glocker | |
| ok deraadt@ | |||
| 2006-11-28 | move printing of the interrupt string into re_attach(). | Brad Smith | |
| 2006-11-22 | add the BCM4312 PCI id. | Brad Smith | |
| 2006-11-22 | style(9): remove variables names from prototypes. | Damien Bergamini | |
| ok mglocker@ | |||
| 2006-11-22 | From Jon Simola <jon@mecha.ca>: | Marcus Glocker | |
| Attach to cardbus based bcw cards, and more cleanup. This should help with a few of the card lockup reports I've received. | |||
| 2006-11-11 | Add support for 3Com 3CRWE154G72. -moj | Mats O Jansson | |
| 2006-11-10 | acx(4) doesn't use rssadapt(9). | Damien Bergamini | |
| pgt(4) doesn't use rssadapt(9) nor amrr. => remove useless #include. | |||
| 2006-10-29 | Add first TX path and active scan bits. Don't expect to much yet. | Marcus Glocker | |
| ok claudio@ | |||
| 2006-10-25 | Ooops, forgot to add radio mtap includes. | Marcus Glocker | |
| 2006-10-22 | replace rssadapt(9) with amrr for automatic rate control. | Damien Bergamini | |
| as a side-effect, this should fix all the "bogus xmit rate" panics users have been complaining about for some time when operating in HostAP mode. | |||
| 2006-10-16 | Fix some "is is"s. ok otto@. | Tom Cosgrove | |
| 2006-10-15 | Add $OpenBSD$ tag | Claudio Jeker | |
| 2006-10-15 | First stubs for a new driver for the Marvell Libertas chips. | Claudio Jeker | |
| The card correctly loads the firmware and it is possible to send a few simple commands to the card but that's it. No packet are sent or received. Only the Netgear WG511v2 cardbus card is tested. A cheese fondue and a bigger amount of white wine was needed to make the interrupts work -- until last night the driver was uploading the firmware to fast and the card garbled the image without moaning. It took us a full day and hundreds of test kernels to figure that out. Joint work with mglocker@, fondue by mbalmer@ OK mglocker@, get it in deraadt@ | |||
| 2006-10-12 | Add a symbolic name parameter to cardbus_intr_establish(). | Alexander Yurchenko | |
| Count cardbus devices interrupts in cbb(4) using evcount(9). ok deraadt@ | |||
| 2006-10-09 | Add powerhooks. Tested with a Netgear WG511v1 on my X40. | Marcus Glocker | |
| ok claudio@ | |||
| 2006-10-06 | Fix cardbus support for pgt(4). Tested with a Netgear WG511. | Marcus Glocker | |
| ok claudio@ | |||
| 2006-10-02 | Simplify device attachment. From brad@ with a tiny correction. | Marcus Glocker | |
| 2006-09-28 | Add cardbus support for pgt(4). | Marcus Glocker | |
| We are still looking for PrismGT cardbus devices for testing. One common model should be the Netgear WG511 v1/v2 made in Taiwan. ok deraadt@ | |||
 |
index : src | |
| OpenBSD base system |
| summaryrefslogtreecommitdiff |