summaryrefslogtreecommitdiff
path: root/sys/dev/fdt
AgeCommit message (Expand)Author
2018-08-30fix memory leak in an error pathJonathan Gray
2018-08-28avoid uninitialised variable use in an error pathJonathan Gray
2018-08-27Add hitemp(4), a driver for the temperature sensors on the HiSilicon Hi3660Mark Kettenis
2018-08-27Add 64-bit DMA support. Enable DMA on HiSilicon SoCs.Mark Kettenis
2018-08-27Add hiclock(4). Make sure hireset(4) attaches early.Mark Kettenis
2018-08-27Add hirest(4), a driver to support reset signal controller blocks onMark Kettenis
2018-08-27Add glue for the USB3 controller on the HiKey 970.Mark Kettenis
2018-08-27handle 16 bit register width required for omap3/omap4Jonathan Gray
2018-08-27Add an interface that allows drivers to claim a framebuffer and checkMark Kettenis
2018-08-27HiSilicon SoCs pre-divide the clock by a factor 8.Mark Kettenis
2018-08-26Add pinctrl(4), a generic pin mux driver.Mark Kettenis
2018-08-26Add plgpio(4), a driver for the ARM PrimeCell GPIO (PL061) peripheral.Mark Kettenis
2018-08-26Add support for HiSilicon Hi3660 (Kirin960) and Hi3670 (Kirin970).Mark Kettenis
2018-08-22Initialize bridge registers instead of relying on ppb(4) to do it for us.Mark Kettenis
2018-08-21Implement address translation. Makes I/O space access work.Mark Kettenis
2018-08-20Enable I2C clocks in imxiic(4).Patrick Wildt
2018-08-20Add the i.MX8MQ eCSPI clocks.Patrick Wildt
2018-08-17The official name for the ssdfb(4) reset GPIO attribute uses plural form.Patrick Wildt
2018-08-17Support reading and using serveral device tree attributes for ssdfb(4),Patrick Wildt
2018-08-13Support CPU frequency scaling on NXP i.MX8M.Patrick Wildt
2018-08-09Hook up the rasops text emulation functions so we only write outPatrick Wildt
2018-08-09Make imxesdhc(4) pass per-function cookies to the SD/MMC bus.Patrick Wildt
2018-08-08Implement IRQ masking and unmasking in imxgpio(4).Patrick Wildt
2018-08-06Give the FDT interrupt API a more generic naming by replacing thePatrick Wildt
2018-08-04Implement a few missing RK3288 clocks and implement resets.Mark Kettenis
2018-08-03Pass PCIe requester ID as sideband data here as well.Mark Kettenis
2018-08-03Implement setting the CPU clock for Allwinner H3/H5 SoCs.Mark Kettenis
2018-08-03Also attach as a regulator if the FDT provides the fixed voltage value.Mark Kettenis
2018-08-03Implement DVFS support.Mark Kettenis
2018-08-02Add I2C attachment code to ssdfb(4). The difference between the I2CPatrick Wildt
2018-08-01Fix various RK3399 clocks and add support for getting the clock frequencyMark Kettenis
2018-08-01Implement a partial update mechanism. Since the SPI-connected displayPatrick Wildt
2018-07-31Display color depth alongside resolution when attaching simplefb(4).Frederic Cambus
2018-07-31Stop reversing bytes read from the framebuffer. That was added sincePatrick Wildt
2018-07-31Implement setting the voltage of the regulators.Mark Kettenis
2018-07-31Correctly set the dividers for the clock of the "big" cores.Mark Kettenis
2018-07-31Fix setting the voltage; the code was using the wrong variable as a step size.Mark Kettenis
2018-07-30Add support for the GIC v3 ITS and use it to implement MSI support forMark Kettenis
2018-07-30Add ssdfb(4), a driver for the SSD1309 controller that drives anPatrick Wildt
2018-07-28Make use of PCI_FLAGS_MSI_ENABLED such that drivers for hardware with brokenMark Kettenis
2018-07-26Add imxspi(4), a driver for the i.MX SPI controller. This is the firstPatrick Wildt
2018-07-26Implement calculating the SPI controller frequency in imxccm(4).Patrick Wildt
2018-07-24Add support for the i2c controller on the Marvell ARMADA 7K/8K SoC as well.Mark Kettenis
2018-07-24Add clock needed to support the i2c controllers on the Marvell ARMADA 7K/8K.Mark Kettenis
2018-07-24The I2C controller on the Allwinner hardware is actually a modifiedPatrick Wildt
2018-07-23The imxiomuxc(4) node itself can also contain a set of pins toPatrick Wildt
2018-07-20match on marvell,armada-38x-uart linux >= 4.18-rc1 changed the compatJonathan Gray
2018-07-09Basic support for SFP modules in mvneta(4). SFP modules are basicallyPatrick Wildt
2018-07-02Allow pluart(4) to attach to acpi(4).Mark Kettenis
2018-07-01Use generated string for the bus number extent.Mark Kettenis
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-14 09:41:39 +0000